messma kelch robot used for sale

Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.

DIMENSIONS / WEIGHTS:. - total height:900 mm

DIMENSIONS / WEIGHTS:. - total height:900 mm

DIMENSIONS / WEIGHTS:. - total height:900 mm

DIMENSIONS / WEIGHTS:. - total height:1000 mm

Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.

DIMENSIONS / WEIGHTS:. - total height:35 mm

DIMENSIONS / WEIGHTS:. - total height:1000 mm

DIMENSIONS / WEIGHTS:. - total height:35 mm

DIMENSIONS / WEIGHTS:. - total height:900 mm

Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.

DIMENSIONS / WEIGHTS:. - total height:35 mm

DIMENSIONS / WEIGHTS:. - total height:1000 mm

DIMENSIONS / WEIGHTS:. - total height:1000 mm

DIMENSIONS / WEIGHTS:. - total height:900 mm

number of controlled axis: 6 workpiece weight: Unbkt kg throat: bis 8000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Controls:FANUC 30iA WORKING RANGE -ROBOT-:. - capacity:170 kg - Reach:1520 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:800 kg

Controls:FANUC 30iA WORKING RANGE -ROBOT-:. - capacity:170 kg - Reach:1520 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:800 kg

WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2700 mm

Controls:KUKA KRC 2 WORKING RANGE -ROBOT-:. - capacity:150 kg - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1285 kg

Controls:KUKA KRC 2 WORKING RANGE -ROBOT-:. - capacity:210 kg - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1267 kg

Welding robot make KUKA type KR 6 ARCYear of construction 2008Technical specifications:Load capacity 6.0 kgNumber of axles 6Repeatability +-0.1mmMax Reach 1823.5mmWeight around 235 KGWith- Control KR C2used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

PEDESTAL:. - Hole pattern for robot : Kuka low / medium load :. DIMENSIONS / WEIGHTS:. - total height:1200 mm - total weight approx.:1100 kg

number of controlled axis:6 workpiece weight:12 kg throat:1360 mm weight of the machine ca.:0,26 t

injection molding machine:2.500-5.000 kN demoulding stroke:650 mm max. manipulateable mass:5.000 g X-axis:650 mm Y-axis:1200 mm :3000 mm C - 90 °, pneumatic S - 15mm 2 x gripper 1 x pneumatic No separate safeguarding equipmant, must be protected by the machine! Adapter: 2 x 450mm high, 140x140mm, 535x815mm (M24) Payment terms: 100% prior to delivery

injection molding machine:800 kN demoulding stroke:120 mm max. manipulateable mass:1.500 g X-axis:120 mm Y-axis:500 mm :Schwenkachse mm Payment terms: 100% prior to delivery

Including welding arm SCA and control cabinet ABB (900x950x1250 mm)

Palletizing robot for bags or similar products. Here performance at 30%

REIS gantry robot with substructure 1.8 m high, x approx. 10 m, y approx. 1 m, e.g. approx. 1 m 4-axis robot, very good condition, was only 4 years in operation.

Robotic arm for various applications

Arm length 1400 mm, equipped with control unit, remote control, 4.5 Kva, 400V,

System includes (1) Industrial Robot KUKA KR 150-2 2000 (2) Spot Welding System SPATZ (3) Camera Inspection OMRON (4) Light Barrier SICK, operational hours counter: 2602h.

Load capacity: 10kg, weight: 245kg, with shuttle table.

Unused Control UNIROB B4 (8.4 TFT touch screen) X axis=1000 (39.4) with servo motor Y axis=1000+1000 (78.7) with servo motor Z axis=4000 (127.5) with servo motor Movement interpolation. Repetition accuracy of +/- 0.1 mm. Maximum weight including gripper: 20 kg. Pneumatic pressure: 6 bars Maximum speed: 3,000 mm/s. Interface: EUROMAP 67 - Interface: EUROMAP 67 - Control: UNIROB B4 - Stroke (X): 1.000 (39,4) with servo mm - Stroke (Y): 1.000+1.000 (78.7) with servo mm - Stroke (Z): 4.000 (127,5) with servo mm - Take-out speed: 3.000 mm/s - Payload: 20 Kg

With Welding Robot Fanuc ARC Mate 120iBE and Controls Fanuc SYSTEM R-J3iB Mate, including documentation.

Number of axes: 6, reach: 3500mm, max. load: 15kg, weight: 220kg, includes welding robot system, additional torch, 2x welding station with turning device, 1x welding station with Demmler table, 1x Cloos QINEO Champ 450 welding machine, has been regularly serviced, on-site inspection is possible.

- 7 axis - Complete cell sytem working on a CNC Punching Machine - Turn table sheet device - Fully automatic loading and unloading device - Safety fence Original cost of 100.000 EUR

Complete palletizing system for trays. The facility consists of: ABB palletizing robot, gripping tool for parcels, pallet magazine, cardboard stacker, protective device and conveyor technology

- ENGEL ER-IS Interface. - Prepared for CC300 Control - Compatible with machine: VC from 28 to 220t EM from 30 to 160t EMC from 50-180t - 1 x vacuum circuit - 1 x compressed air circuit - Compatible machine: VC88-220, EM30-160, EMC50-180 t - Stroke (X): 400 mm - Stroke (Y): 800 mm - Stroke (Z): 1.400 mm - Payload: 5 Kg - Driving method: X, Y, Z: servo, C: pneumatic

5 axis robot: 3 axes driven by servo motors, A movement, C axis Rides in the following axes: X-550, Y-1200, Z-2000 The servo inverters are built into the Z axis crossbeam Touch control panel - Teach Box - Control: Teach Box - Stroke (Y): 1.200 mm - Stroke (X): 550 mm - Stroke (Z): 2.000 mm - Driving method: servo

Palletizing system for sacks, trays or similar products. Kuka palletizing robot type: KR 180-2 PA Kuka was built in 2004, gripping tool and the recording tape are NEW

Y-travel: 1000mm, z-travel: 3800mm, connected load: 4kW.

- Pneumatic C 0-90 rotation - Vacuum circuits: 1 - Clamp circuits:2 - Robot support height 450mm. Including - Compatible machine: 450 - 500 t - Control: CNC 6.2 - Stroke (Y): 1.600 mm - Stroke (X): 500 mm - Stroke (Z): 2.000 mm - Payload: 15 Kg - Driving method: servo

LINEAR AXLE:. - Number of moving slides:2 DIMENSIONS / WEIGHTS:. - space requirements length:15000 mm

Product dimensions: 150-800x120-500x80-400mm, pallet height: 2500mm, max. pallet weight: 1t, cycle time: 7.5s/cycle, with Industrial Robot Fanuc R-220iC 125L and documentation.

Was used for toast rolls, includes 2x pick & place robots ABB FlexPicker IRB 360 for grouping, IRC with PC processor, PC, monitor and visualization, Komatec vision system, Siemens S7, remote maintenance, operation on swivel arm, picker 1&2 suction grippers, various belts for product transport and frame with protection system.

Weight: 222kg, with Welding Machine HYBRID 4000M, including spare parts, machine needs official accident prevention test.

LINEAR AXLE:. - Number of moving slides:2 DIMENSIONS / WEIGHTS:. - space requirements length:7000 mm