We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,272 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
number of controlled axis: unbkt. workpiece weight: unbkt. kg throat: unbkt. mm total power requirement: unbkt. kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Mitsubishi Industry 6-Axis Articulated Arm Robot Here we offer a Mitsubishi Industry 6-axis articulated arm robot. RV Series Industrial Robots Compact and powerful flexible automation and high reliability. The RV series offers a highly dynamic 6-axis articulated robot for the highest level of quality. Type: RV-3SDB-S15 Number of axes 6 Maximum lifting force 3.5 kg Reach radius 642 mm Weight 38Kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone.
used
I am selling a Robot ABB IRB 6400R 2.8-150. Manufactured 2003-08-11 Including control pendant panel and full documentation. Total weight 2100kg. Fully operational. Little worked. Available the same.
used
On offer are three Biomek systems by Beckman Coulter; two i5 and one i7 system. We also have a Class II enclosure (BioMAT2 Robotic by Contained Air Solutions) for housing one of the i5 machines. The machine's configurations are as follows: BIOMEK i7: Hybrid configuration with one 96-channel 1-300μL pipetting head and one span8 pipetting head that can be operated in either 5-1000μL pipetting mode or in continuous dispense mode. This unit also includes a roof-mounted HEPA unit. first BIOMEK i5 comes with a 96-channel 5-1200μL pipetting head, a side cabinet and an integrated thermal microplate sealer (PlateLoc by Agilent Technologies) and various deck-position units such as a positive positioner, an orbital shaker, and a peltier element. The second BIOMEK i5 has one Span8 pipetting head, which can be operated in either 5-1000μL pipetting mode or in continuous dispense mod ...
used
Used machine in good condition. Available for immediate delivery.
used
- ENGEL ER-IS Interface. - Prepared for CC300 Control - Compatible with machine: VC from 28 to 220t EM from 30 to 160t EMC from 50-180t - 1 x vacuum circuit - 1 x compressed air circuit - Compatible machine: VC88-220, EM30-160, EMC50-180 t - Stroke (Z): 1.400 mm - Stroke (Y): 800 mm - Stroke (X): 400 mm - Payload: 5 Kg - Driving method: X, Y, Z: servo, C: pneumatic
used
This KAWASAKI RS006L Robot machine was manufactured in the year 2020 in Denmark. It is equipped with a Kawasaki F60 / E71 Controller and has 6 axis.
used
This ABB IRB 4600 Robot was manufactured in the year 2016 in Sweden. It is equipped with a IRC5 singel control unit and has 6 axis. The machine has a payload of 40 kg and a reach of 2.55 meters.
used
This COMAU C4G SMART NH3-210-3.1-SH Robot machine was manufactured in 2007 in Latvia. It is a welding robot and it is controlled by a COMAU TP4i interface and weighs 2280kg. Contact us anytime for further information.
used
This ABB IRB 6600 M2004 Robot was manufactured in the year 2007 in Sweden.
used
Workpiece weight: 0 kg Number controlled axis: 0 Workpiece diameter minimum: 0 mm Revolving radius maximum: 0 mm (1) Single / (2) Double gripper: 1 MACH-id 5482 MAKE FANUC + ROFIN TYPE S- 420 iF & SM 2000
used
Robot Robot FANUC typ S 430 IL // Cena 5.000 Euro
used
This KUKA KR-240-2 Robot was manufactured in 2005 in Germany. It has an arm length of 1100 mm, a max. payload of 240 kg and a total balanced load capacity of 640 kg. See full tech specs as PDF attached.
used
This Halter Automation Load Assistant S-180-20 Robot was manufactured in the year 2018. The machine has a minimum workpiece of 40 mm x 40 mm.
used
This MIGATRONIC CoWelder + PI 350 AC/DC WIG Welding machine was manufactured in the year 2022 in Denmark. It is equipped with an UNIVERSAL ROBOTS UR10 robot arm. This machine dispose of a cooling unit. The software pendulum and software copier have been purchased as an additional function. The perforated table is not included.
used
This REIS ROBOTICS Robot System - RDT 40 / SRV 6 / RDT 40 was manufactured in the year 2001. It is a 6-axis robot system with 2 stations operated with each tilt and turn module having a load capacity of 500kg. It comes with control panel, light barrier and Fronius Magic Wave 2600 for TIG welding. See layout plan attached.
used
Workpiece weight: 0 kg Number controlled axis: 0 Workpiece diameter minimum: 0 mm Revolving radius maximum: 0 mm (1) Single / (2) Double gripper: 2 MACH-id 5355 MAKE ESAB TYPE GANTRAC 14000 YOP 2013 DIMENSIONS Length 16.000 mm Width 2.000 mm Height 2.000 mm
used
This ABB IRB 4600 M2004 Robot was manufactured in the year 2021 in Sweden. It is equipped with a IRC5 M2004 and has 6 axis. The machine has a Reach of 2.55 meters and a payload of 40 kg.
used
This KUKA KR60 HA - KRC2ed05 Robot was manufactured in the year 2011 in Germany. It is equipped with a KUKA control unit. The machine has a reach of 2033 mm.
used
This Yaskawa Motoman YR-MPL0160-B04 Robot was manufactured in the year 2010 in Japan. The machine has a payload of 160 kg.
used
This ABB IRB 460-110/2.4 Robot was built 2020 in Sweden. It operates with 4-axis, 110kg of payload and 2400mm of reach. At its current location there are 4 units available. The robots are not in production anymore and ready for immediate availability. Single unit and pack purchase options are possible.
used
This MITSUBISHI PR-5AH Robot was manufactured in the year 2004 in Germany. The machine has 3 axis. Includes full documentation of the associated software and a software CD, gripper arm, control unit, remote control.
used
Robot milling cell Manufacturer: AMI consisting of the following components Industrial robot Kuka type KR180 R2500 extra Year of construction 2019 Operating hours: 100 Control: KRC4 Milling robot system 12 kW for KRC4 ES779 milling spindle Recooling system Socket for robots 2 x Kuka positioner KP 2 HV2600 HW with base plates 6-fold tool tray Enclosure for 2 separate work rooms
used
This ABB IRB1600 Robot was manufactured in the year 2016 in Sweden. The machine has a hand capacity of 10 kg.
used
This Kuka LBR iiwa 7 Robot was made in 2022 in Germany. It has a nominal payload of 7 kg, a maximum reach of 800 mm, and 7 axes. The front flange has both pneumatic and electrical connections (MF Pneumatic). See original offer with all technical positions as PDF (German) attached.
used
This YASKAWA MA2010 Welding Station Robot was manufactured in the year 2019 in Japan. It is equipped with a Lorch S8 RoboMig XT control unit and with a DX200 Master controller. The machine dispose of a Torch cleaner (BRG2000D) and 2 positioners (DK-2500-R1000) with Servo tracks (FB500).
used
This IGM Welding Robot System was manufactured in the year 2006 in Germany. It is a complete system with robot (KUKA), 2x manipulator, welding machine and extraction system. The first system is available in July 2024 and the second is still in operation until August 2024.
used
Used machine in good condition. Available for immediate delivery.
new
PROJECT PALLETIZING SYSTEM FOR BUCKETS KUKA palletizing robot with 3-fold gripper for bucket and bucket receiving tape - 1 KUKA robot - KR 210 with KRC2 - 2 bucket positioning belts with centering - 2 pallet fixing frames - 1 fencing of the robot cell incl. safety light curtain
used
This ABB IRB140 - IRC5 Robot was manufactured in Sweden in 2008.
used
This Kuka Kr16 Robot was manufactured in the year 2006. It is equipped with a Kuka KRC Software control unit.
used
This Epson G6-653S Robot was made in the year 2017 in Japan. It has a max payload of 6 kg.
used
This ABB IRB 4600 Robot was built in 2002. The robot has a reach of 205 cm and a capacity of 60 kg. Is new, never used.
used
This YASKAWA 6VX88 Robot machine was manufactured in the year 2020 in Japan. It is equipped with 6 axis and has a safety control (YRC100).
used
This Fruitcore HORST 1400 Robot was manufactured in the year 2021 in Germany. It has 6 axis. The machine has a maximum load capacity of 10 kg.
used
Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.
used
Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.
used
Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.
used
Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.
used
Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.
used
This KUKA KR700 PA was manufactured in 2021. Originating from Germany with a load capacity of 700 kg and a reach of 3320 mm, it weighs 33850 kg and is powered by the compact KR C4 controller. It is in a excellent condition as it was not put into operation. This KUKA KR700 PA machine we have for sale represents a valuable addition to any production line. For further information, please contact us.
used
This EPSON G10 854P Robot was manufactured in the year 2021 in Japan. The machine has a Maximum payload of 10 kg.
new
Robot Nachi EZ03V4-02-4525 Wingslicer new and in original packaging year 2019 Ceiling EtherCAT End of 2018- beginning of 2019 Repeatability +/-0.014mm Max. load capacity: 3 kg Max. working range: approx. 450 mm in Z 250mm Scope of delivery : Robot,Controller,Cable,Teachpanel,Documentation 2 weeks start-up guarantee.No further warranty In addition, spare parts are always available from stock. Robot is fully functional and can be viewed Auction amount is ex works Free loading Auction amount is net. Export price. You will receive a proper invoice with VAT. If you have any further questions, please contact us by e-mail or phone
used
Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.
used
Description X axis: 1500 mm Y axis: 500 mm Z axis: 1000 mm Motors: Brushless Clamp tilting: 90 ° Approximate size of the press (tons): Up to 200 Tons Max load: 5 Kg Euromap: 67
used
Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.
used
Description X axis: 2085mm Y axis: 1225mm Z axis: 690mm motors: brushless gripper rotation: no caliper overturning: yes Sprue clamp : no empty : 1 gripper control: no max capacity: 10 kg Euromap 12
used
Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.
used
Description Cartesian Robot With Double Vertical Axis X Axis Travel: 2500 mm Y axis stroke Product side: 850 mm Y axis travel on sprue side: 850 mm Z axis stroke Product side: 1500 mm Z Axis travel on Matarozza side: 1500 mm Gripper overturning: 90 ° Motors: AC servo motor Euromap 12
used
Description X axis: 500 mm Y axis: 1800 mm Z axis: 1100 mm motors: brushless gripper overturning: 0 ° -90 ° indicative size of the press (ton): 150/300 max load: 5 kg euromap: 12