with length stop with 1 roller conveyor, 530 x 140 cm with 1 roller conveyor, 400 x 140 cm Roll width: each: 115 cm
Max. saw blade diameter: 350 mm Pneumatic material tensioners Table can be rotated left and right Manual feed
General Manufacturer: MEP Type: Cobra 352 NC 5.0 Year of Make: 2017 Control: Volution TS50 Cutting speed: 1,700 / 3,400 rpm Saw blade diameter: 350 mm Cutting performance Round tube: 120 mm Square tube: 105 / 100 mm Rectangular tube: 180×70 / 135×60 mm Solid material round: 50 mm Solid material square: 80 / 55 mm Solid material rectangular: 160×35 mm Dimensions and weight Dimensions: 1,750 mm x 2,360 mm x 1,700 mm Weight: approx. 600 kg Condition Condition: Used Functional: Tested and fully functional
SEGATRICE AUTOMATICA a Doppia Colonna SHARK 350 NC HS 5.0 + Evacuatore Motorizzato a Paletta Segatrice a nastro automatica, a doppio montante, per eseguire tagli a 0° su acciai da costruzione, inox e legati, pieni e profilati, con dimensioni comprese in 350x350 mm. Di serie completa di: Evacuatore di trucioli motorizzato dragante, applicabile a destra o a sinistra della macchina. Regolazione della pressione delle morse. Alimentatore con rulli verticali per il contenimento delle barre. Macchina a controllo numerico CNC MEP 50-Windows CE” Based, progettato da MEP per l’automazione delle macchine di propria produzione. Ciclo di taglio taglio pulito” - L’alimentatore arretra la barra per evitare delle rigature sulla superficie tagliata quando il nastro torna in alto. Sistema di controllo a bus di campo con doppio microprocessore con collegamento seriale. Interfaccia uten ...
Offer 25318 Specifications: - Manual band sawing machine - Saw blade dimensions 2375 x 20 x 0.9 mm - 2 cutting speeds N 33 / 66 rpm - Max. clamping possibility 205 mm - Mitre adjustable li + re 30 ° - Cutting range - 90° round 160 mm - Square 160 mm - flat 200 x 100 mm - 45° li + re round 140 mm - flat 140 x 60 mm - Drive 400 V / 1.5 / 1.8 kW - Coolant device - Discharge roller conveyor with stop 3000 mm - Feed roller conveyor 1500 mm - Weight approx. 350 kg - Space requirement approx. W 1100 x H 1700 x D 1550 mm
Max. saw blade diameter: 400 mm Pneumatic material tensioners
Specifications: - Saw blade dimensions 250 x 2 x 40 mm - Saw blade spindle speed 52 rpm - Cutting range at 90° around 80 mm - flat 95 x 60 mm - Mitre adjustable up to 45 ° - Material vise - Drive 400 V / 0.5 kW - Space requirement approx. W 650 x H 1500 x D 750 mm - Weight approx. 100 kg
MEP AVT400 Capping machine Serial: 271221 2021, Stainless capper, Robust and easy to use capping machine suitable for applying ROPP, screw caps onto bottles with screw thread necks. Max bottle diameter 195mm, max bottle height 355mm, Up to 400 - 600 bottles per hour, mobile, 1Ph
MEP Shark 260 Price 1650 Adjustable gravity lowering Round tube cutting capacity mm. 210mm. at 90° Cutting capacity with square cross-section mm. 200mm. at 90° Cutting capacity other cuts 270x200 mm. Head motor power kw.1.8 Engine revolutions 2 speeds RPM 36 - 72 Strip development diameter 2750 x 25.4 s. 09mm. User Manuals CE Declaration of Conformity Machine weight kg. 350
Machine Details Stock-No. 1105-03834 Type of machine Cold Circular Saw Make MEP Type TIGER 350 Year of manufacture 1996 Type of control conventional Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight base free truck Technical details saw blade diameter 350 mm Cutting diameter 250 mm stroke 170 mm Capacity 90 degrees: flat 235 X 70 mm capacity 45 degrees: flat 85 X 70 mm Cutting Speed 26/ 52 m/min total power requirement 3 kW weight of the machine approx. 700 KG Additional information VERY NICE
Sawing capacity: 280 mm round / 330 mm square Sawing capacity 45º: 250 mm round / 250 mm square Sawing speed: 40/80 mtr.min. Band saw blade: 3,320 x 27 x 0.9 mm Saw angle: 0 - 60º Equipped with: - Cooling system Country of origin: Italy Motor power: 1.8 kW Machine weight: 700 kg Machine LxWxH: 190 x 120 x 135 cm
MEP Multimatic SA8, year of construction 1995 Straightening and cutting system for reinforcing steel, fully automatic, complete functional system, immediately available Plant still in operation and can be demonstrated.
COBRA 352 SX evo, semi-automatic electropneumatic sawing machine to cut aluminium and light alloys using blade with electrowelded hardmetal plates (HM). The machine cuts from 45° right to 45° left and the head tilts from 0° to 45° left so as to make inclined cuts. Sawing machine with controlled single axis microprocessor with the latest generation of controllers for semi-automatic sawing machines designed by MEP. OPERATION: Starting the cycle by means of the relative push-button the following steps are carried out: – the vice closes and the motor starts – the head goes down to execute cut – motor stops – head returns to top position and vice opens. BEST PRICES IN EUROPE FOR MEP MACHINES! ASK FOR A QUOTE
SHARK 512 SXI evo, semi-automatic electro-hydraulic sawing machine with 4640x34x1,1 mm band, to cut pipes, profiles and beams up to 510×320 mm at 0°. Extremely versatile machine, for cuts between 60° left and 60° right. CUTTING CYCLE: after having positioned the bar, starting the cycle the following operations are performed: vice closing – motor start – head descent for cutting – motor stop – head return – vice opening. CYLCE DOWN UP: Operating in semiautomatic cycle , the new function DOWN makes the head and blade motor stop once the cut is finished with the vice closed, by pressing the UP button the head raises back to its starting point and the vice opens. ASK FOR EVERY MODEL OF MEP MACHINES, WE HAVE THE BEST PRICES IN EUROPE
SHARK 281, manual band sawing machine to cut from 0° to 60° left. A FEW FEATURES: Electric panel (wiring totally identifiable, stand-by, loose-key safety switch, main switch, pole change switch, emergency stop, motor magneto-thermal overload, minimum tension coil, protection against missing phase, low tension safety device (LTSD 24 V).- IP55 control handle. BEST PRICES FOR ALL MEP MACHINES IN EUROPE! ASK FOR A QUOTE
SHARK 281 CCS (Cut Control System) manual bandsawing machine to cut from 0° up to 60° left. Other than the manual cut mode, the sawing machine can make single cuts without operator, using the head weight control- led by a hydraulic brake: after the cut the band stops. The frame at this point is manually lifted to the position needed in order to reposition the bar to cut . In the version with pneumatic vice (MA) the vice is opened/clo- sed by a manually-controlled valve (optional with pedal control). BEST PRICE IN EUROPE
Technical data: -Saw blade size 300 x 3.4 x 32 mm -Blade rotation speed RPM -Section - at 90 ° round 90 mm or square 80 mm -Pneumatic chucks -Material supplies automatic position control -Easy lifting up to approx. 1000 mm -Multiple hub -Swing-arm control panel with CNC control MEP -MOT. Dust aspiration + mobile chip extraction -Drive 400 V / 1,1 kW - space requirement approx. B 2750 x H 1800 X 2000 mm -Weight approx. 600 kg
Working height: 1035mm, usable width: 6000mm, max. usable length: 6000mm, max. wire diameter: 12mm, max. tensile strength: 650N/mm², bending capacity (number of bars): Ø12mm: 40 bars, Ø10mm: 60 bars, Ø8mm: 90 bars, Ø6mm: 150 bars, Ø5mm: 200 bars, geometry/bending data: smallest leg between two angles: 50mm (with bending finger Ø17mm), standard bending finger: no.60, Ø40mm, number of programmable bending angles: 20, memory positions: 100, speeds: first speed: 45°: max. 5.8s, 90°: max. 8.7s, 180°: max. 13.7s, second speed: 45°: max. 2.9s (complete cycle forward/backward), 90°: max. 4.4s (complete cycle forward/backward), 180°: max. 6.8s (complete cycle forward/backward), mechanics/hydraulics: 4 double-acting hydraulic cylinders, hydraulic unit with pumps, solenoid valves, pressure regulators, safety valves, delivery without oil, operation/control: control panel with keyboard ...
Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, metal saw -Manufacturer: MEP, cold circular saw metal circular saw type TRL 300 pivoting on both sides -Engine: Type C 112 M -Power: 2.2 / 3.0 kW -Speed: 720 / 1450 rpm -Saw blade: Ø 315 mm -Cutting area at 90 degrees flat: 110 x 70 mm -Cutting range at 45 degrees: 100 mm -Accessories: incl.2 saw blades, see photos -Dimensions: 1230/630/H1800 mm -Weight: 273 kg
Radial fan, chip extraction fan, fan, extraction, dust extraction system, chip blower, extraction system -Manufacturer: MEP, extraction system with transport frame -Type: unfortunately without type designation -Motor: Cantoni 0.75 kW / 2840 rpm -Base: on wheels -Dimensions: 950/480/H1860 mm -Weight: 40 kg
dimensions of saw-band: 3150 x 25,4 x 0,9 mm : 20/40 m/min capacity 90 degrees: round: 260 mm capacity 90 degrees: square: 250 mm capacity 90 degrees: flat: 320 x 200 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: square: 210 mm capacity 45 degrees: flat: 240 x 200 mm Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dimensions of saw-band: 3650x27x0,9 mm speed: 15/100 m/min capacity 90 degrees: round: 280 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330x260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: square: 250 mm capacity 45 degrees: flat: 270x200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170x170 mm total power requirement: 2,2 kW weight: 1240 kg vice: 340 mm dimensions: 2020x2040x1740 mm Control: Electro-hydraulic fully automatic band saw with additional, semi-automatic Function, for cuts from 0 ° to 60 ° left. Compact machine with the new Windows CE based MEP-50 controller and 7 touch-screen display for managing all machine parameters. Easy operation and control of all cutting parameters in real time. Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings, Singl ...
dimensions of saw-band: 3150x27x0,9 mm : 40/80 m/min capacity 90 degrees: round: 260 mm capacity 90 degrees: square: 250 mm capacity 90 degrees: flat: 320x200 mm : 230 mm : 210 mm : 210x240 mm : 180 mm : 160 mm : 110x250 mm capacity 60 degrees: round: 150 mm capacity 60 degrees: square: 140 mm capacity 60 degrees: flat: 140x160 mm work height max.: 870 mm Overall size: 2100x2050x1950 mm Control: NC weight of the machine ca.: 770 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 450 mm saw band length: 6600 x 41 x 1,3 mm table height: 800 mm : 450 mm : 450 mm : 450 x 270 mm workpiece weight: 15 - 95 m/min : 7,5 kW work height max.: 3000 kg connected load: 3750 x 1400 x 2100 mm Control: NEW PRICE ~ 40.700 EURO very good condition Semi-automatic bandsaw, two-column guided Equipment: - hydraulic vice - infinitely variable cutting speed - chip conveyor - line laser - driven chip brush - coolant device - operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dimensions of saw-band: 2950x27x0,9 mm : 15-100 m/min : 285 mm capacity 90 degrees: square: 220 mm capacity 90 degrees: round: 250 mm capacity 90 degrees: flat: 280x220 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 80 mm capacity 60 degrees: flat: 140x100 mm capacity 45 degrees: round: 230/200 mm capacity 45 degrees: square: 200/170 mm capacity 45 degrees: flat: 220x200/200x140 mm total power requirement: 2,2 kW Weight: 990 kg Overall size: 2500x2230x2050 mm Accessories / equipment: - Discharge roller conveyor with pneumatic stop, 350 mm wide, digital, length 7.000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 250 mm saw band length: 2950 mm cutting width: 280 mm dimensions of saw-band: 2950 x 27 x 0,9 mm capacity 90 degrees: flat: 280 x 200 mm capacity 90 degrees: square: 230 mm capacity 45 degrees: round: 190 mm capacity 45 degrees: flat: 180 x 180 mm capacity 45 degrees: square: 180 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: flat: 110 x 110 mm capacity 60 degrees: square: 110 mm total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 0,4 t Powerful miter band saw for cuts from 0 ° to 60 ° left -CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Description: -Manual cutting cycle -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made ...
saw blade diameter: 350 mm dimensions of saw-blade: 350 x 32 x 2,5 mm cutting diameter: 115 mm stroke: 100 mm capacity 90 degrees: square: 95 mm capacity 90 degrees: flat: 180 x 95 mm capacity 45 degrees: round: rechts & links 110 mm capacity 45 degrees: square: rechts & links 95 mm capacity 45 degrees: flat: rechts & links 125 x 95 mm capacity 60 degrees: round: 90 mm capacity 60 degrees: square: 80 mm capacity 60 degrees: flat: 90 x 95 mm cutting speed: 15 / 30 / 45 / 90 m/min total power requirement: 2,6 kW weight of the machine ca.: 375 kg dimensions of the machine ca.: 1000 x 950 x 1800 mm Features: - With miter adjustment 60° left / 45° right - Coolant device - 2 speeds - Machine base - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dimensions of saw-blade: 350x32x4 mm vice: 180 mm : 1700/3400 U/min capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180x70 mm capacity 45 degrees: round: 120/110 mm capacity 45 degrees: square: 100/95 mm capacity 45 degrees: flat: 135x60 mm output: 2,2 kw weight: 225 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 350 mm capacity 90 degrees: square: 350 mm dimensions of saw-band: 4640x34,1,1 mm : 355 mm sawband speed: 15-115 m/min weight of the machine ca.: 2800 kg dimensions of the machine ca.: 3050x2190x2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
180 € 
