membrane used for sale

Fiorini storage tank 1000 liters VKB 2.0 - 1000L 4" Storage tank 1000 litres, type VKB 2.0 - 1000L 4" • Cold water tank It is made of painted carbon steel sheet and insulated by closed-cell elastomer foam. This thermal insulation offers optimal resistance to condensation. • Charge valve As a result, the hydraulic circuit can be filled both during peak demand and during normal operation. •Safety valve The valve is set to 6 bar. By means of a channelled drain, it protects the module from overpressure. • Automatic air separator It is located on the upper part of the module and vents the air present in the module. • Drainage valve This drains the water from the deepest point of the reservoir to allow it to be emptied. •Case The base is made of thick lacquered sheet steel. The external panels are made of galvanized and painted sheet steel and are highly weather-resist ...

Fiorini storage tank 1000 liters VKB 2.0 - 1000L 4" Storage tank 1000 litres, type VKB 2.0 - 1000L 4" • Cold water tank It is made of painted carbon steel sheet and insulated by closed-cell elastomer foam. This thermal insulation offers optimal resistance to condensation. • Charge valve As a result, the hydraulic circuit can be filled both during peak demand and during normal operation. •Safety valve The valve is set to 6 bar. By means of a channelled drain, it protects the module from overpressure. • Automatic air separator It is located on the upper part of the module and vents the air present in the module. • Drainage valve This drains the water from the deepest point of the reservoir to allow it to be emptied. •Case The base is made of thick lacquered sheet steel. The external panels are made of galvanized and painted sheet steel and are highly weather-resist ...

K+G Wetter SM 65 STL bowl cutter, 65 liters bowl chopper, bowl and bowl-cover stainless steel, noise reduction cover, knife shaft brake electrically operated, main switch as well as electric control cabinet integrated, membrane keypad, variable knife Speed, 2 bowl speeds (9/18 UpM), mixing speeds forwards and reverse, temperature switch off function, knife head with 6 knives. The machine is immediately available and can be tested like in Koblenz, Germany.

I will sell the membrane press Friz optimat MFP with a boot device.

K+G Wetter Cutmix 70 STL bowl cutter, 70 liters bowl chopper, all stainless steel, membrane keyboard, variable knife speed up to 5.000 rounds per minute, mixing speeds forwards and reverse, knife shaft brake electrically operated ,knife head with 6 knives, bowl with highest filling level, noise reduction cover. You are very welcome to test the machine in Koblenz, Germany.

Tetra Pak ultrafiltration system, consisting of: various tubular ceramic membrane filters, 2 Alfa Laval centrifugal pumps, type: LKH 40/235 FSS 15.0 kW, 3 Samson globe valve with actuator and positioner, Endress + Hauser flow meter, total dimensions: 4000 mm x 1400 mm x 2400 mm.

Laska KU 65 cutter, bowl capacity 65 liters, microprocessor control, membrane keyboard, stepless speed control, 4 freely programmable fixed speeds, mixing gear forward and backward continuously, 6 knife head, electric knife shaft brake, noise protection cover. The cutter can be tested in 56070 Koblenz.

Ø 1/2",membrane pump,plastic,ASTI PFD2 216,max 1450 l/h

K+G Wetter SM 65 T2M-R, 65 liters bowl cutter, bowl and bowl-cover stainless steel, noise reduction cover, knife shaft brake, main switch as well as electric control cabinet integrated, membrane keyboard, 2 knife speeds 1.500 – 3.000 rounds per minute, mixing speeds forwards and reverse, knife head with 6 knives. You are very welcome to test the machine in Koblenz, Germany.

K+G Wetter SM 90 STL bowl cutter, 90 liters bowl chopper, bowl and bowl-cover stainless steel, noise reduction cover, knife shaft brake electrically operated, main switch as well as electric control cabinet integrated, membrane keypad, variable knife speed up to 5,000 rpm., 2 bowl speeds (9/18 UpM), mixing speeds forwards and reverse (40-500 UpM), temperature switch off function, knife head with 6 knives, power 32 kW. You are very welcome to test the machine in our facility in Koblenz, Germany.

Kilia vacuum bowl cutter, 200 liters bowl cutter, bowl and bowl-cover stainless steel, hydraulic noise reduction cover, knife shaft brake electrically operated, membrane keyboard, variable knife speed, knife head, hydraulic loading device, hydraulic unloader

K + G wetter SM 120 STL, 120 litres cutter, membrane keyboard, variable knife speed, 2 bowl speeds, mixing speed forward and backward, S + S knife head with 6 blades, unloading device, hydraulic loading device. You are very welcome to test the machine in our facility in Koblenz, Germany.

Kilia vacuum bowl cutter, year of manufacture 2010, 200 liters bowl cutter, bowl and bowl-cover stainless steel, hydraulic noise reduction cover, knife shaft brake electrically operated, membrane keyboard, variable knife speed, variable bowl speeds, mixing speed, hydraulic loading device for 200 liter bins, hydraulic unloader, You are very welcome to inspect the machine at our facility in Koblenz, Germany.

SECOND-HAND MEMBRANE PUMP REF#: C6349 Second-hand diaphragm pump

Dopel membrane pump 1 inch with suspended solid pre-separator Pneumatically operated, mounted on transport trolleys on a mobile-by-mobile vehicle. Technical data: Gear ratio: 1:1 Maximum capacity: approx. 197.6 l/min Discharge quantity per cycle: approx. 0.88 l Air connection: 1/2" Nominal suction side: 1" Nominal diameter print page: 1" Maximum operating pressure: 8.3 bar Max solid diameter: 3.3mm Weight: approx.10 kg Lukra pumps, basement pumps Special price

turning diameter: 250 mm turning length: 100 mm control: SIEMENS 840 D total power requirement: 35 kW weight of the machine ca.: 7500 kg dimensions of the machine ca.: m E M A G (Germany) Vertical CNC Controlled Hard Turning and Grinding machine with tool turret and workpiece handling System Model VSC 250 DS Year 2004 # M7 28.69324 _______________________________________________________ Turning Ø, max. 250 mm Turning length internal / external 100 mm Workpiece length min./max. 29 – 100 mm 6-positon tool turret Ø / swing-Ø 480/790 mm Workpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mm Feed rate / Quick feed X/Z 45/30 m/min. Feed force X/Z 5,5/11 kN Spindle speed 4.300 / 6.000 rpm Spindle drive 28 kW Total electrical load, ...

No. 5007: 1 gebr. Posten div. Spare Parts - Power Supply Board / Optics / Pneumatics Fabr. ZOLLER, type probably suitable for V 400 / V 402, accessories: - Power supply board 00521 / 05E6011 / 85-1433-03 - Control panel / membrane keyboard 00932 / 05E6007 - 2 x 2 bellows - Pneumatic ET - Camera module 02717 / 05E6116.1 - Optics 07436 / 05E6118.2 Other: Shipping weight approx. 8 kg

Brand: KVT Type: Maxipress 1700 Capacity: fill quantities 0-1350 kg / emptied: 0-4200 / fermented: 0- 6800 Juice tubs contents (cc): 820 Power: approx.7.5 kW Mains voltage: 230 / 400V 3 / N / PE 50Hz Control voltage: 24V AC / 24V DC • Pneumatic horizontal grape press (1700 liters) • Drum: horizontal, drilled all around with a centrally arranged drum membrane • Stainless steel • Press basket with 360° slitting • Press basket opening can be moved manually • Fully automatic controls • Central filling • Integrated compressor Good operational condition and ready to use.

Technical specifications: Workpiece width min-max in mm: 10 - 1300, Workpiece length in min.mm: 100 Workpiece height min.-max. in mm: 3 - 120, Operating side: right, UV coating roller: yes, Adjustable direct drive for application roller: yes, Application roller speed m / min .: 5 - 30, Direct drive metering roller: yes, Chrome-plated metering roller mm: yes, Attachment roller: yes , Reverse drive: yes, Motors quantity: 5 pcs Motor capacity, Kwt: 50.75 Pump system: membrane

Sheeting machine Seewer RONDO SSO 62? Product? Manufacturer: Seewer Rondo? Model: SSO 62? Year of manufacture: 1998? Material: Stainless steel cladding? Condition: used, tested, baker's condition? Digital display with membrane keypad? Manual & automatic functioning? Flour shakers? Sideband folds up? Mobile with brake? Dimensions of the straps: 139 x 63 cm (LxW)See picture for details

The Pall CFS system is designed as a single unit and can be installed directly in front of the filling line without the need for a buffer system. It is a completely independent process unit consisting of the following components: filter vessel Piping and connections Membrane cleaning system (CIP) integrity check Switchboard The hygienic design, the simple integrity test and the full automation ensure the microbiological safety of the system and usually allow the operation of the filling staff. Cluster filtering groups filter elements into clusters. Each cluster has its own outlet valve. During filtration, all clusters are open. Cleaning, sterilization and integrity testing are performed per cluster. Advantages of the CFS principle; Longer life Integrity testing on site Integrity diagnostics per cluster Special rinsing High specific flow rate Short flush times Constant flow in all candles ...

Ultrafiltration Membrane filter device for the clarification of all kinds of fruit juices. manufacturer: Mabex Engineering GmbH type: UF412 dynamic cross-flow filtering. Mabex tubular membranes in bundles A-19. filtering capacity 12,000 l / h electric power 26 kW water supply capacity 80m3 / h compressed air 6 bar The device is complete and functional. Technical Documentation Software We send photos at the customer's request.

Cutter Laska model KU 65 AC, bowl capacity 65 liters, microprocessor control, probe plate with membrane keypad and plain text display, infinitely adjustable knife shaft 35-4,900 rpm, two bowl speeds, mixing gear backwards infinitely variable, electric knife shaft brake, 6-knife head, 3-knife head optionally available for an extra charge, engine power 23 kW, operating voltage 3 x 400 VAC / 50 Hz

Cutter K+G Wetter CutMix 200 STL with load for 200 liter standard car and ejector, 200 liter cutter, surface, bowl lid with storage wall and bowl stainless steel, noise protection cover, knife shaft brake, main switch, membrane keyboard, infinitely adjustable knife shaft speed (40-4,400 rpm), infinitely adjustable bowl speeds (5-18 rpm), infinitely adjustable mixing gear backwards (40-500 rpm), digital display knife shaft temperature bowl, K+G weather CM 200 STL

Cutter K+G Wetter CutMix 120 STL with load for 120 liter standard car and ejector, 120 liter cutter, surface, bowl lid with storage wall and bowl stainless steel, noise protection lid, knife shaft brake, main switch, membrane keyboard, infinitely adjustable knife shaft speed (40-4,400 rpm), infinitely variable bowl speeds (5-18 rpm), infinitely adjustable mixing gear backwards (40-500 rpm), digital display knife shaft temperature bowl, rated power 42.5 kW, K+G weather CM 120 STL

The Pall CFS system is designed as a single unit and can be installed directly in front of the filling line without the need for a buffer system. It is a completely independent process unit consisting of the following components: filter vessel Piping and connections Membrane cleaning system (CIP) integrity check Switchboard The hygienic design, the simple integrity test and the full automation ensure the microbiological safety of the system and usually allow the operation of the filling staff. Cluster filtering groups filter elements into clusters. Each cluster has its own outlet valve. During filtration, all clusters are open. Cleaning, sterilization and integrity testing are performed per cluster. Advantages of the CFS principle; Longer life Integrity testing on site Integrity diagnostics per cluster Special rinsing High specific flow rate Short flush times Constant flow in all candles ...

– after technical inspection – very good condition – German production – year of production 1996 – segmented shoe - the perfect solution for varnish / veneer TECHNICAL PARAMETERS: grinding width 1100 mm grinding height 1-150 mm Combo unit with task-controlled membrane grinding shoe aggregate motor power 11 kW blowing on the tape pneumatic oscillation two types of belt speeds of 4.5 and 18 m/s Aggregate with felt shaft engine power 0.75 kW shaft oscillation Unit with cleaning brush engine power 0.75 kW smoothly adjustable feed feed speed range 4-18 m/min feed motor power 1.5 kW electric height adjustment vacuum table fan motor power 3 kW connector diameters 4 x 120 mm, 1 x 150 mm transport dimensions (L/W/H) 200 x 245 x 210 cm weight 2500 kg 1. The Alpha Combi unit is a grinding unit with a contact shaft with a dia ...

Double diaphragm pump with air drive DEPA type DH40-FA-ZRT Air operated diaphragm pump, double pump Series no.: B1802498 Year of construction 09.05.2018 Temperature: max. 130C Size: 40 Grain size: max. 16 mm Suction height: approx. 2 m Suction height filled with prudukt: approx. 9 m Operating pressure: max. 7 bar Air connection: 3/8 Suction connection: 1 1/2 Pressure connection: 1 1/2 - self-priming - Aluminium housing - Diaphragm plate made of stainless steel - Membrane made of nopped E4® PTFE composite balls made of PTFE ball seats made of stainless steel Space requirement: L x W x H: 370 x 270 x 450 mm Net weight: 15 kg very good condition; used

Spiral Kneader Diosna SP 120 AF Spiral kneader Diosna SPV 120 AF extendable - Spiral kneader extendable - for max. 120 kg dough or .max 75 kg flour - 2 speeds -Membrane keyboard - with 1 extendable stainless steel boiler - Spiral made of stainless steel - with pliers locking - Boiler is with friction wheel drive - Head hydraulically raising and lowering - Vat capacity 180 litres

Double diaphragm pump with compressed air drive DEPA type DH50-FA-ZRT Air operated diaphragm pump, double pump Series no.: B1600416 Year of construction 26.01.2016 Temperature: max. 130C Size: 50 Grain size: max. 18 mm Suction height: approx. 2 m Suction height filled with pressure: approx. 9 m Operating pressure: max. 7 bar Air connection: 3/4 Suction connection: 2 Pressure connection: 2 - self-priming - Aluminium housing - Diaphragm plate made of stainless steel - Membrane made of nopped E4® PTFE composite balls made of PTFE ball seats made of stainless steel Space requirement: L x W x H 550 x 350 x 560 mm Net weight: 35 kg very good condition; used

Dough Kneader Spiral Kneader Diosna SP 120 F -Type: SP 120 F -with membrane keypad -for max. 75kg flour or for max. 120kg dough -with 2 automatic timers -Stainless steel spiral and boiler -Boiler diameter 75cm -Boiler capacity approx. 180 litres -Machine mobile on castors with a swivel castor - 2 locks -with plastic flour dust cover -400 Volt Frequency 50 Hz -Weight of the machine approx. 550 kg -Condition "good"

Usefull width: 1400 mm. Staining roller out of soft sponge rubber Membrane pump

Drive motor output: 750 W / 400 V; Drilling performance steel: 25 mm; Speed range: 60 - 3050 U/min; Number of gears: 12 steps stepless; Spindle chuck: MT3; Quill stroke: 95 mm; Reach: 209 mm; table size: 308 mm x 308 mm; Keyless drill chuck: 1 - 16 mm; weight: 107 kg; Industrial motor Quiet running spindle thanks to new spindle design Machine operation with safety electrics in 24 V DC voltage Guaranteed concentricity ≤ 0.02 mm measured in the drilling spindle Right/left rotation Precision spindle bore Control panel with user-friendly, dirt- and water-resistant membrane keypad Speed display Separate emergency stop impact switch Thread cutting function Precisely machined, stable drilling table with diagonally running T-slots with circumferential cooling water channel, laterally tiltable by -45° and rotatable by 360 Drilling depth stop LED machine light integrated in the ...

Extensive apple press, only 5,132 operating hours - Fruit supply - Mashing production 15 to/h - Belt press 14 to/h with post-extraction - Membrane filtration system 7,000 lt/h - 8 x 15,000 lt storage tanks, partly with agitator

turning diameter: 420 mm turning length: 1500 mm swing diameter over bed slide: 250 mm Swingdiameter in the bed bridge: 590 mm centre height: 210 mm Turning length in the bed bridge: 260 mm reus: 16 (45-1800) U/min tail stock: MK 4 quill stroke: 120 mm diameter of quill: 50 mm spindle taper: DIN ISO 702-2 Nr. 6 spindle bore: 52 mm spindle cone: MK 6 feed: längs 17 / 0,05 - 1,7 m/min feed: plan 17 / 0,025 - 0,85 m/min total power requirement: 4,6 kW weight of the machine ca.: 1340 kg dimensions of the machine ca.: 2440 x 915 x 1375 mm Fully equipped leading and tension spindle lathes. TH 4215 with digital position indicator DPA 21 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Handwheels with adjustable fine scale 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Upper slide adjustment rang ...

Machine Mechanics overhauled & repainted 6 months warranty on mechanics Advantages: + Solid construction, perfect condition, very smooth running + immediately available + mobile machine, on height-adjustable feet, with fixed boiler + Stainless steel boiler and spiral + Flour dust cap, with automatic switch-off + with CS-03 membrane keypad with recipe programming + with infrared dough temperature measurement + Boiler left/right run + complete overhaul in our workshop, according to German quality standards + only high-quality original parts are installed + Machine was finally tested by our two master bakers + comes with instruction manual Specifications: - Year of construction: 2002 - Flour capacity: max. 75 kg - Dough capacity: max. 120 kg - Boiler volume: 180 liters - Ø boiler: 750 mm - Boiler height upper edge: 805 mm - Engine power: 8 kW (kneading spiral & b ...

turning diameter: 330 mm turning length: 830 mm swing diameter over bed slide: 196 mm Swingdiameter in the bed bridge: 170 centre height: 165 mm centre distance: 830 mm Turning length in the bed bridge: 430 reus: 16 (70-2000) U/min tail stock: MK 3 quill stroke: 110 mm diameter of quill: 32 mm spindle taper: DIN ISO 702-2 Nr. 4 spindle bore: 38 mm spindle cone: MK 5 feed: längs 32 / 0,052 1,392 m/min feed: plan 3,2 / 0,014 0,38 m/min total power requirement: kW weight of the machine ca.: 0,52 t dimensions of the machine ca.: 1,7 x 0,75 x 1,6 m Fully equipped leading and tension spindle lathes. TH 3309D with digital position indicator DPA 21/3402040 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 4 - Precisely crafted slide - Handwheels with adjustable fine scale 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Main spi ...

MEMBRANE SKINNER, MAJA, MODEL: EVM 2000 Technical description: Serial number: 38280 Power supply: 380 V, 3 Ph, 50 Hz, 2.2 A, 0.75 kW Working widht: 420 mm Dimensions: 700 X 700 X 1000 mm

bore capacity in steel (diameter): 50,0 mm throat: 360 mm bore stroke: 220 mm morse taper: 4 MK table:: 570 x 480 mm threading: M 42 Stahl turning speeds: 50 - 2.200 U/min feed: 0,08 - 0,50 mm/U column diameter: 180 mm total power requirement: 3,0 kW weight: 575 kg range L-W-H: 750 x 950 x 2380 mm The gear column drilling machine GB 50 NC Vario is standard with a infinitely variable speed control, reducing the cutting speed can be optimally adapted to the workpiece. Because of the heavy, massive It is designed primarily for use by professional users or ideally suited in mechanical engineering or workshops. - Equipped with motorized table height adjustment as standard - 6 automatic drilling feeds switchable via electromagnetic clutch - Hand-scraped drilling table made of solid gray cast iron, swiveling from -45° to + 45 ° - Ground base plate with T-slots - for clamping particularly tal ...

WEINIG Rondamat 912, S/N 912-497 – fully automatic tool grinding machine • Automatic re-sharpening of straight planing knives in the cutter head with conventional or hydro-clamping • Automatic resharpening of cutters in the hydroplaning head (in front of the chest) • Automatic dividing head for up to 36 cutting edges • concentricity tolerance of less than 0.005 mm • Integrated coolant device • Table feed infinitely variable (forward / return) • Easy operation via membrane keypad and digital displays Specifications • Grinding mandrel D=50 mm • Planer head diameter min. 80 mm to max. 280 mm • Grinding length max. 260 mm • Table stroke 500 mm • Programmable knife count from 2 – 36 • Programmable grinding cycles per tool 1-9 • Clearance angle infinitely adjustable 15° – 35° • Axis angle max. 15° • Grinding spindle speed n=4,600 r ...

Control Panel, Machine Control Panel MD, MASCHINENFABRIK DIEBURG PRONTO 5040 Window for screen: 240 x 170 mm Membrane keyboard: RAFI 923.000.037 9.99200.434/000-000 used, tested ! Dimensions: 485 x 355 x 120 mm

Membrane accumulators, diaphragm accumulators, bladder accumulators, pressure accumulators ORSTA 25/16 TGL 10843 capacity: 25 l zul. Operating pressure 160 bar zul. Operating temp. 80°C without rubber bladder ! used, tested ! Dimensions 545 x 325 x 325 mm

Manufacturer: Bürkle Lackauftragsmaschine mit zusätzlicher Abzeihender Walze, Type: SALR , Year: 1999, Control: Siemens, Program: no, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 6-120, Durchlassbreite min-max mm: 1400, Operating side: rechts, Working height: 890+-, Lackauftragseinheiten: 1, Spachteleinheiten: 1 Reverseinheit, Vorschub Transport m/min min - max: 6-30, kW - Leistung Transport: 1,5, Auftragswalzengeschwindigkeit m/min min-max: 6-30, Gummierte Auftragswalze(n): 20, Dosierwalzenschwindigkeit m/min min-max: 5-12, Durchmesser Auftragswalze mm: 240, Double rubber coating: yes, Dosierwalze verchromt: yes, Reverse und Gegenlauf: yes, Dosierwalzenschwindigkeit m/min min-max: 5-12, Glättewalze verchromt: yes, Widht of roller coater: 1416, Attachment bracket roller: yes, rbakel: yes, Roller lift out: motorische, Ty ...

Manufacturer: Bürkle Lackauftragsmaschine, Type: SLC 1300, Year: 1998, Control: Sütron, Program: Ja, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Durchlassbreite min-max mm: 1400, Operating side: rechts, Working height: 890+-, Lackauftragseinheiten: 1, Vorschub Transport m/min min - max: 6-30, kW - Leistung Transport: ca.1,0, Dosierwalzenschwindigkeit m/min min-max: 5-12, Durchmesser Auftragswalze mm: 238, Dosierwalze verchromt: yes, Dosierwalzenschwindigkeit m/min min-max: 5-12, Attachment bracket roller: yes, rbakel: yes, Roller lift out: yes, Hight adjustment by engine: yes, Pump system: Membrane, Carriage: yes, Carriage: yes, Year :1998

Maintenance Unit, Maintenance Equipment Combination SMC IDG10M2-F02C-X016 AMH150C-F02BC-T, Submicrofilter with pre-filter IDG10-F02, membrane dryer Operating pressure: max. 0.85 MPa ( 8.5 bar ) New ! Dimensions: 210 x 155 x 67 mm

Manufacturer: Bürkle , Type: SLC 1300, Year: 1998, Control: Sütron, Program: yes, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 6-120, Operating side: rechts, Working height: 890 +-, Lackauftragseinheiten: 1, Vorschub Transport m/min min - max: 6-30, kW - Leistung Transport: 1,0, Auftragswalzengeschwindigkeit m/min min-max: 6-30, Gummierte Auftragswalze(n): yes, Dosierwalzenschwindigkeit m/min min-max: 5-12, Dosierwalze verchromt: yes, Reverse und Gegenlauf: yes, Dosierwalzenschwindigkeit m/min min-max: 5-12, Roller lift out: yes, Hight adjustment by engine: yes, Pump system: membrane, Carriage: yes, Conveyor lenght mm: 980, Conveyor: Band, Carriage: yes, Year :1998

Contact pressure gauge, pressure gauge with switching contacts GAUGE BEIERFELD 1/BM20/2 0 - 4 kp/cm² (0 - 4 bar) Switch type: 2/Z102-1 Switching capacity: 220 V AC / DC 30 W (VA) Housing diameter: Ø 160 mm Accuracy class: 2,,2,5 flange diameter: Ø 160 mm with protective membrane ! New ! Dimensions: 220 x 210 x 210 mm

turning diameter: 325 mm turning length: 1000 mm swing diameter over bed slide: 250 mm Swingdiameter in the bed bridge: 440 mm reus: 12 (85-2000) U/min tail stock: MK 3 quill stroke: 100 mm diameter of quill: 40 mm spindle taper: DIN 55027 Nr. 5 spindle bore: 32 mm feed: längs 0,006 - 1,77 m/min feed: quer 0,003 - 0,885 m/min total power requirement: 2,2 kW weight of the machine ca.: 770 kg dimensions of the machine ca.: 2150 x 950 x 1350 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main s ...

Manufacturer: Bürkle , Type: DAL 1, Year: 1989, Control: hand, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 3-120, Operating side: rechts, Working height: 890, Lackauftragseinheiten: 1, Vorschub Transport m/min min - max: 5-30, kW - Leistung Transport: 0,75, Auftragswalzengeschwindigkeit m/min min-max: 6-30, Dosierwalzenschwindigkeit m/min min-max: -5-12, Durchmesser Auftragswalze mm: 238, Reverse und Gegenlauf: yes, Dosierwalzenschwindigkeit m/min min-max: -5-12, Attachment bracket roller: yes, rbakel: yes, Pump system: membrane, FREE TEXT: ohne Schaltschrank, Year :1989

turning diameter: 440 mm turning length: 1500 mm swing diameter over bed slide: 210 mm Swingdiameter in the bed bridge: 620 mm centre height: 210 mm reus: 21 (20 - 2000) U/min tail stock: MK5 quill stroke: 180 mm diameter of quill: 70 mm spindle taper: DIN 55027 Nr. 8 spindle bore: 62 mm feed: längs 0,04 - 12 m/min feed: quer 0,02 - 6 m/min total power requirement: 7,5 kW weight of the machine ca.: 2430 kg dimensions of the machine ca.: 2850 x 980 x 1330 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0 ...