melting used for sale

Capacity up to 250 kg/h Melting container capacity 35 kg stainless steel with casting device with vibration table Connection 8.2 kVA Electrical heating resistance 4.5 kW with cooling compressor, coolant R134a Cooling capacity 7.5 kW with touchscreen operation with 1 year warranty, operating errors excluded

Technical data (subject to change): Machine: Constant workpiece output from the chain path: 38 mm (incl. edge at edge thicknesses 0.3 - 3 mm) min. throughput width: 65 mm with a maximum workpiece thickness of 25 mm min. workpiece length in feed direction: 150 mm Basic height (upper edge chain track): 960 mm Workpiece: min. workpiece length: 150 mm min. workpiece width: 65 mm min. workpiece thickness: 8 mm workpiece thickness: 40 mm (with copy function) workpiece thickness: 60 mm (without copy function) Smallest workpiece: 150 mm x 150 mm, or 65 mm x 300 mm Lateral protruding coating material: 0 mm Edge material: paper, plastic and veneer min. height: 14 mm height: 65 mm Roll material: min. thickness 0.3 mm thickness 3.0 mm Veneer edges limited possible up to 1.0 mm cross-section 130 mm² min edge length 160 mm upper edge protrusion: 5 mm Equipment: - Drive fo ...

Zinc melting furnace RAUCH ZSO 450 BMasch. -No: 70112/836597 Year of construction 1997Technical specifications:Max. Temperature: 450 degreeHeating output: 96 kWWeight approx: 1300 kgWith- 1 control cabinet- ZFB conveyor belt including drop chuteusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Chocolate tank, 2013, Stainless chocolate melting tank, 500L, agitation with scrape surface, adjustable temp controls, mounted on stainless skid, 3Ph

PUR - Adhesive unit with integrated pre-melting tank for a permanent zero joint Symmetrical device, therefore can be used on both left- and right-hand machines Glue roller diameter 25 mm Greatly reduced maintenance and cleaning effort due to PTFE Coating of all assemblies (except glue roller) suitable for flexible production capacities Order in synchronization As a rule, it can be adapted to all common machine manufacturers: - on BRANDT machines - Olympic - Series by SCM - BIESSE AKRON - Series Application height up to 60 mm Low application quantities (

foil width: 1400 mm max. speed: 250 m/min Diameter of the holes: 0,3-2,8 temperature: 400 °C heating capacity: 37 kW Control: Touchscreen Perforation machine (Star_2) with unwinder and rewinder (MTX_03 touchscreen) Machine is new, used less than 100 hours. HOT MICROPERFORATORS = With the hot needle technique, the hole is created by the melting of the material caused by heated needles. The pin cylinders are mounted on a perforation roller. They are heated to a temperature of 400°C by special lamps. This technology creates homogeneous holes and was developed in the 1980s. An industry standard wiring closet system with Wifi modem (purchased separately and configured), for wireless connection to any existing inline production system. User-friendly and multilingual control panel with additional buttons/knobs for manual operation. Intelligent Web Guidance System : For precise control over p ...

CNC machining center including laser edge type BIMA / Gx50 / E / 160 / 630 Specifications: IMA gantry machine in real GANTRY design Processing area: • Length in X direction with all aggregates (mm): 6300 • Width in Y-direction with all aggregates (mm): 1600 • Height in Z-direction with all aggregates (mm): 225 maximum clamping height including clamping device - the maximum workpiece thickness depends on equipment/application • Length in X direction with vertically positioned main spindle and tool diameter 20 mm: 6300 mm • Width in Y-direction with vertically positioned main spindle and tool diameter 20 mm: 2000 mm • Width in Y-direction with edging (mm): 1600 • Length in X-direction Single user processing without gluing (mm): 2 x 3050 • Length in X-direction free space center (mm): 200 • Length in X-direction Single user processing with gluing (mm): 2 x 2 ...

Equipment used for coating of food or pharmaceutical products. Non-tilting stainless steel turbine 2 liquid spraying ramps / 2 powder spraying ramps Complete installation with : - 2 x interchangeable spraying / coating arms including each: 1 liquid spraying ramp with double heating jacket + 1 powder spraying ramp. - Accurate unit dosing powder (screw system) - Galvanised steel frame / mobility rail for the 2 spray arms (easy switching) - Lateral unloading trolley - Ventilation / air treatment unit - 8 weights / scales on the feet - Electrical cabinet - 500 litre melting tank skid Max. load 3000 kg One-sided loading, Central unloading with reverse rotation Length 8 m x diam. 2.2 m + Documentation and drawings available

Strap cutting machine was built in 2019. The purpose of the machine is to cut seat belts and other materials such as PVC tape, nylon and velcro to a specific length. The raw material is taken from a roll and then precisely measured and cut using a cutting knife. The machine was built with the highest quality components from reputable brands. An installed controller allows you to set the correct temperature of the cutting knife, which by melting the edges of the cut material prevents it from delaminating and fraying during cutting. The tape cutting machine has never been used and is brand new. Technical specifications of the strap cutting machine - PC software: KEYENCE - temperature controller: OMRON - servomotors: MITSUBISHI ELECTRIC (3 pcs.) - rotary table: SMC INDUSTRIAL AUTOMATION (3 pcs.) - table rotation angle: 190° - electric heater: LIMATHERM SENSOR - inductive pr ...

Code: 0812 Brand: OMEZ Model: ZAGFILO 900 Thread splicer for veneer Working port mm 900 Advancement speed from mt 5 to 25 min Automatic thread-cutter Automatic ejector for ended pieces Temperature regulator for the thread melting Wheels on base Overall dimensions mm 1300 x 600 x 1430 h Weight kg 300

Flowwrap machine for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, small products. Infeed table with automatic transport through pushers into the machine. Film supply from the top. Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device. - Technical specifications: max. film width: 250mm | 2 rotating knives | 220V, 2.4kW | no compressed air required | max. speed of the machine in neutral: 230 cycles/min | max. bag (not product) dimensions (mm): L(90-220)xW(30-110)xH(0-55): machine dimensions (mm): L3770xW670xH1450 | weight (net/gross): 700/750kg. The machine has to operate with minimum of 30 cycles per minute to avoid premature melting of the OPP film. Please note that our new pric ...

Flowwrapping machine, especially to pack multipacks of normal or irregular shaped, dry products (also round or cylindric shapes). Including collection unit to collect the incoming products to multi pack units. Infeed table with automatic conveyor to bring the product to the packaging machine. Including special device to hold single products together for multi packs. Additional device in the sealing area running simultaniously with the product to keep single parts together. Precise and reliable function by using servo motors. Film feed from top. Automatic wrapping and sealing below the product. - Technical Specifications: 220V, 3,66kW | no compressed air required | max. speed of the machine in neutral: 200 cycles/min | max. product sizes: (mm) L(100-400)xW(10-40 or 40-80 or 80-150)xH(10-30 or 30-60) | maschine dimensions ca. (mm): L5000xW965xH1750 | weight (net/gross): 1000/1150kg. The ma ...

Flowwrap machine - new design - for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, large products. Infeed table with automatic transport through pushers into the machine. Special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. Film supply from the top. Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device. - Technical specifications: max. film width: 480mm | 1 rotating knife | 220V, 2.8kW | no compressed air required | max. speed of the machine in neutral: 150 cycles/min | max. bag (not product) dimensions (mm): L(100-450)xW(50-210)xH(0-80) | machine dimensions (mm): L3990xW900xH1468 | weight (net/gro ...

Flowwrap machine - new design - for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, large products. Film feed from the top. Infeed table with automatic transport through pushers into the machine. Special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device. - Technical specifications: max. film width: 600mm | 1 pendular knife | 220V, 3.6kW | no compressed air required | max. speed of the machine in neutral: 40 cycles/min | max. bag (not product) dimensions (mm): L(120-450)xW(50-200)xH(10-110) | machine dimensions (mm): L4380xW970xH1500 | weight (net/gros ...

Flowwrap machine - new design - for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, medium/larger products. Film feed from the top. Infeed table with automatic transport through pushers into the machine. Special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device. - Technical specifications: max. film width: 450mm | 1 pendular knife | 220V, 3.2kW | no compressed air required | max. speed of the machine in neutral: 80 cycles/min | max. bag (not product): dimensions (mm): L(120-450)xW(50-160)xH(10-80) | machine dimensions (mm): L4380xW870xH1500 | weight ( ...

Flowwrap machine for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, medium/larger products. Film feed from the top. Infeed table with automatic transport through pushers into the machine. Special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device. - Technical specifications: max. film width: 350mm | 1 pendular knife | 220V, 2.4kW | no compressed air required | max. speed of the machine in neutral: 120 cycles/min | max. bag (not product) dimensions (mm): L(110-330)xW(30-130)xH(10-60) | machine dimensions (mm): L3670xW820xH1410 | weight (net/gross): 800 ...

Flowwrap machine for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, small products. Infeed table with automatic transport through pushers into the machine. Film supply from the bottom for product with low stability, with humidity or some stickiness (to be tested/confirmed). Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device. - Technical specifications: max. film width: 250mm | 2 rotating knives | 220V, 2.4kW | no compressed air required | max. speed of the machine in neutral: 230 cycles/min | max. bag (not product) dimensions (mm): L((65-190)OR(120-280))xW(30-110)xH(0-40) | machine dimensions (mm): L3920xW670xH1320 | weight (net/gross): 700/750kg. The machine has to operate with min ...

Flowwrap machine for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, medium/larger products. Infeed table with automatic transport through pushers into the machine. Special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. Film supply from the top. Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device. - Technical specifications: max. film width: 400mm | 1 rotating knife | 220V, 2.8kW | no compressed air required | max. speed of the machine in neutral: 150 cycles/min | max. bag (not product) dimensions (mm): L(150-400)xW(50-180)xH(0-65) | machine dimensions (mm): L4020xW800xH1450 | weight (net/gross): 90 ...

Flowwrap machine for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, medium/larger products. Infeed table with automatic transport through pushers into the machine. Special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. Film supply from the top. Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device. - Technical specifications: max. film width: 350mm | 2 rotating knives | 220V, 2.6kW | no compressed air required | max. speed of the machine in neutral: 180 cycles/min | max. bag (not product) dimensions (mm): L((65-190)OR(120-280))xW(50-160)xH(0-40) | machine dimensions (mm): L4020xW770xH1450 | weight (n ...

Flowwrap machine for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, small products. Infeed table with automatic transport through pushers into the machine. Film supply from the top. Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device. - Technical specifications: max. film width: 180mm | 3 rotating knives | 220V, 2.4kW | no compressed air required | max. speed of the machine in neutral: 330 cycles/min | max. bag (not product) dimensions (mm): L(50-115)xW(30-80)xH(0-35) | machine dimensions (mm): L3770xW670xH1450 | weight (net/gross): 700/750kg. The machine has to operate with minimun of 30 cycles per minute to avoid premature melting of the OPP film. Please note that our new pric ...

Flowwrap machine for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, small products. Infeed table with automatic transport through pushers into the machine. Film supply from the top. Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device. - Technical Specifications: max. film width: 180mm | 4 rotating knives | 220V, 2.4kW | no compressed air required | max. speed of the machine in neutral: 330 cycles/min | max. bag (not product) dimensions (mm): L(45-90)xW(30-80)xH(0-35) | machine dimensions (mm): L3770xW670xH1450 | weight (net/gross): 700/750kg. The machine has to operate with minimum of 30 cycles per minute to avoid premature melting of the OPP film. Please note that our new price ...

Glue melter, glue machine, hot glue machine, industrial hot glue gun, hot melt glue gun -Connection: 220 volts -Power: 500 watts -Melting capacity of up to: 4.2 kg per hour -Machine: electrically heated -for cartridges -Funding: via compressed air -Weight: 1.8 kg

Hardening furnace, muffle furnace, nitriding furnace, microwave muffle furnace, incineration furnace, microwave high-speed incinerator, laboratory furnace -Melting and melt digestions z. B. for elemental analysis -Drying, annealing and heat treatments -Max. Heat: 1200 ? C -Microwave -Menu control Interfaces -Dimensions interior: 250/110 / H80 mm -Transport dimensions: 600/460 / H490 mm -Weight: 50 kg

Fixed stop side on the left. Brief description of the equipment: - Fixed stop side left - Workpiece transport device - Upper pressure - Control Power Control PC22 - Release agent spraying unit - Joining milling unit, 2 x 3 kW - Gluing part A20 Basic for rolls up to 3 mm and strip goods up to 20 mm, with melting unit with granulate container and quick-clamping system - Cross-cut unit, 2 x 0.8 kW, with pneum. Dissimulation - Lubricant spray agggregat - Pre-milled aggreagt 1.5 kW, pneum. adjustable - Mould milling unit FK13, 2 x 0.4 kW - Universal milling unit 4 kW, controlled, with infinitely variable axis - Multi-plastering device MN21 autom. - Finishing unit FA11, with finishing device, detergent application and buffing unit, pneum. adjustable -Noise protection - Free space for additional processing units Further equipment information: - Machine stand throughout f ...

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container - Manufacturer: HOMAG - Scope of delivery: see pictures -electrically heated -Number: 1x glue basin available - With the premelting device, you always have enough hot melt adhesive available -Dimensions: 480/220 / H200 mm -Weight: 30 kg / piece

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -Manufacturer: Homag -Heating basin with roll length: 120 mm -Execution: electrically heated -Number: 1x glue basin available -Price: per piece -Dimensions: 700/620/H300 mm -Weight: 44 kg/piece

Angular gear for heating basins for edge banders, edge banding machines, melting unit with granulate container -Manufacturer: Homag -Dimensions: 440/185/H240 mm -Weight: 30 kg

Angular gear for heating basins for edge banders, edge banding machines, melting unit with granulate container -Manufacturer: Homag -Nummer: 3 pieces available -different designs -Price: per piece -Dimensions: 300/170/H190 mm -Weight: 16.8 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 4-060-15-0600 -electrically heated -Dimensions: 460/160/H340 mm -Weight: 19.5 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 4-060-15-0660 -electrically heated -Dimensions: 410/140/H220 mm -Weight: 8.2 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: HOMAG -Type: 0-380-03-0497 -Type: 2-006-51-2870 -electrically heated -Dimensions: 400/70/H225 mm -Weight: 10.6 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 4-060-15-0600 -electrically heated -Dimensions: 470/175/H385 mm -Weight: 20.3 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 15-259 -electrically heated -Dimensions: 580/220/H570 mm -Weight: 18.7 kg

MURAT - NR 241 - cutting, milling and screwing of reinforcement steel MURAT - KD 658/20 - 4 head welding machine MURAT - CN 770/20 - corner clean machine Capacity Min. 100 windows / 8 hours, Max. 120 windows / 8 hours All these machines make automatic production line for PVC systems. The price includes these three machines above and transporter of the frames between welding and corner cleaning. MURAT - NR 241 - Details: All sawing, routing, drilling, reinforcement steel screwing, marking and end milling operations on PVC profiles are gathered in one machine controlled by computer. Stacking of 10 profiles (max. 6,5 m length). Manual barcode labeling system integrated with single-lines. Servo controlled automatic swing of the saw to all angles between 30° and 150° with 0.1° accuracy. Drain slot routing, drilling and routing at variable angles. Automatic scr ...

Kustner-Sterilchoc FP cooking & sterilzation process installation, UHT in continuous mode, enabling to reach an advanced bacteriological stability and security of you finished product. Output: 250 - up to 2.000 kg/h (depending on configuration). Continuous, efficient and flexible production process which can be regulated during production. Advanced economical caloric process balance. Fully stainless steel executed construction. Minimum floor imprint. CIP cleanable. Waukesha lobe pumps, model 034 and 030, year 1999. Control panel with Siemens S5 PLC control for easy control and operation. Including pre-mix vat with 2 stainless steel augers and outfeed lobe pump (Waukesha, model 034, motor 4 kW). Working principle: after the pre-mix is added to the pre-mix vat and melting salt is added, the continuous processing takes place in 3 successive stages; 1st step: heating up to 85/90°C by satura ...

Fully Automated 4 Clamps Perfect Binder With PUR Gluing Unit from SM Klebetechnick GX2311, AGE 2009, Serial No. 08103754, Book Size: Max. 320x320mm, Min. 145x105mm, Cover Size: Max. 320x660mm, Min. 135x225mm, Book Thickness: 0,3 to 65mm, Cover Weight Range: 81,4 - 302,4 g/sqm, Book Weight Range: 60 - 135 g/sqm, Cover Pile Height: Max. 150mm, Milling Depth Adjustment From 0 To 4mm, Speed: 1350 Cycles/Hour, 4 Creasing Positive/Negative, 2 Creasing, Palmar For Automatic Books Adjustment, Color Touchscreen Panel, Book Thickness Input Caliper SI-470A, Cover Feeder Suction, Supersonic Double Feed Detect Sensor, Glue Tank Unit, Lateral Side Glue, Horizon SI-470A Delivery Conveyor, Smoke Extractor , Power Required: 400V Rotary Current 16A, 6,5 KW For Adhesive Binder and 400V Rotary Current 16A, 6,0 KW For Melting Unit, Standard Accessories

Processing both PVC dry blend / PVC pellets ‑ Special design extruders for a perfect PVC melting and uniform plasticization ‑ Specific rotating dies for an even material flow and thickness distribution​ ‑ Automatic calibration cages and collapsing boards ‑ Fully automatic winding stations ‑ Water cooling circuit on specifics and key points of the lines ‑ Easy machine operation by LCD touch screens ‑ High level of automation and process optimization solutions.

cartoning machine Tecmapack FM2501 power supply 400V/3F / 6kW gluing with hotmelt glue machine output: 800 pcs/h (applies to both formats) supported format: carton 20 pcs fi75mm 390x300x110mm 390x300x85mm and 10 pcs fi75mm 390x150x110mm 3902x150x85mm designed for packaging plastic packaging with a diameter of 75 mm after modification and others control system - Telemecanique - Modicom TSX melting device - Nordson ProBlue4 low operating costs, easy format change, simple format parts the machine was used in combination with a grid inserter for the 20-pc carton version

Holtrop Jansma-AFS clean air extraction with compressed air cleaning, auger discharge, rotary lock, chip fan, return air with summer/winter gate valve and fire protection device Type: OSFS 185 Year of construction: 2005 (2015 new turnstile and new control system) Clean air extraction Suction supports: ø700 mm + ø700 mm Length: 3,500 mm Width: 2,300 mm Height: 6,200 mm (onderbak 2,700 mm + bovenbak 2,700 mm + 800 mm fans) Capacity: 21,000 m3 /hour Chip fans: 2 15 kW, 380V, 56 Amp, 10,500 m3/uur, 3,000 tpm, 3,850 Pa, Type: RL E 550130 Filter surface: 185 m2 Filter tubes: 150 stuks Length of filter tubes: 2,200 mm Diameter of filter tubes: 180 mm Cleaning: Compressed air cleaning Flame protection: Sprinkler installation with fire brigade connection Screw: HJ STH-380 12 tpm Turnlock: HJ ZRS-300, 31 tpm Hopper dimensions: 250350 mm Transport fan: Connection diamet ...

Hot needle micro perforation machine, make LaserPin (IT), year 2020, - Usable width for micro-perforation = 1400 mm, - Maximum speed = 250 meters/minute, - Diameter of holes = 0.3mm to 2.8mm, - Maximum temperature = 400°C, - Heating power = 37 KW, - Touchscreen control panel, The machine was bought in mid-2020 and only used for less than 100 hours, HOT MICROPERFORATORS = With the hot needle technique, the hole is created by the melting of the material caused by heated needles., The pin cylinders are mounted on a perforation roller. They are heated to a temperature of 400°C by special lamps., This technology creates homogeneous holes and was developed in the 80s., An industrial standard control cabinet system with WiFi modem (purchased separately and, configured) for wireless connection to any existing inline production system., User-friendly and multilingual control panel with addition ...

Description: LASER TECHNOLOGY SYNTERIZATION SYSTEM for METALLIC DUSTS .  , The machine is capable of producing parts made by melting fine metal powders in a few hours in a single processing step, using a laser beam, with any geometric complexity, with final solidity such that they can be used immediately, without using other tools. The process is based on three-dimensional geometry prepared in the form of CAD data that allows the machinery to directly build the parts with the metal powders.  , Composed of: 1 EOS EOSINT M280 sintering machine 1 radiator , 1 air circulation filter system , 1 exhaust gas filter system 1 washing bubbler 1 manual forklift 1 electric forklift 1 transport module 1 sieve module 1 loading mdule 1 fastening system  , Machine features: 2 400 W lasers printing area 250 x 250 x 350 mm scanning speed surface to be printed 7 m/ ...

Description: • Hotmelt Glue Applicator • Serial number 112804 • Tank capacity 4 liters • Melting capacity 5 kg/h • Service temperature from 20 °C up to 200 °C • Transport dimensions 1200 x 800 x 800 mm Approx. Onsite Dimension. (l x w x h): 620 x 330 x 620 mm, weight approx.: 50 kg

Single sided postforming edge processing machine Brand: WEHRMANN   Type: Combima DPF New with 12 months warranty Example with typical equipment; almost each equipment is possible.  Please discuss your requirements with us  Technical data: Machine control: BECKHOFF route control with 15? Touch-Screen for pre-selection of units and for saving programs.  The workpiece transport via precision roller chain R75 with height adjustable top pressure.  Feed speed: max. V=6-30 m/min.  frequency controlled drive,  Top pressure: Motorical height adjustment via axis adjustment in program Right hand site equipped with 1 unit, width adjustment via NC axis: 1 Pre-milling unit With 1 motor with vertical shaft,  400 V, 12,5 KW, 100 Hz, 6000 rpm. Motor shaft Hydro D40 Swivable 90 - 180 degrees, move in/out for use Left han ...