136,414 used machines on RESALE, but how to find them? Machine Search
Fully functional Eldec hardening plant Year of Make: 2014 Type: MIND 750 CNC Machine Number: KA20130186 Serial Number: SY14001 Operating hours: 32,767 h Accessories: KLH Tank Pumps Heat Exchanger Station TPW100 TPW100-00-ELD Year of construction 2013 Location of the machine: 73430 Aalen The machine can be viewed on site. It is still energized and works perfectly. You can make an appointment for a viewing at any time. We would love to hear from you. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your interest in advance.
x-travel: 550 mm y-travel: 400 mm z-travel: 360 mm b-axis: +/- 110 ° c-axis: 360 ° 0 Control: HEIDENHAIN iTNC 530 spindle taper: HSK63 spindle turning speed - stepless: 20000 U/min tools in tool magazin: 48 weight of the machine ca.: 10 t dimensions of the machine ca.: 3 x 5 x 3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A retort furnace PFS Anlagenbau UG for gas nitriding, nitrocarburizing, and tempering is available. Load weight range: 750kg-6000kg, max. operating temperature: 750°C, treatment chamber dimensions X/Y/Z: 1800mm/900mm/900mm, number of burners: 4, burner type: recuperative, burner output: 4×80kW, loading height: 1200mm, max. evacuation temperature: 350°C, retort material: 1.4841, circulator air volume flow: 10000m³/h, nitriding system manufacturer: Process-Electronic, vacuum pump capacity: 240m³/h, total pressure: below 0.7mbar, max. operating pressure: 1.45bar. Documentation available. An on-site inspection is possible.
Key data: 300 °C
Technical data: Manufacturer: Vötsch Type: NTL 60/60 Year of Make: 1999 Usable space:0.2 m³ Nominal power: 7.2 kW Nominal temperature: 300 °C Steam room: 0.39 m³ Minimum exhaust air volume flow: 0.2 m³ Condition Condition: Used Functional: tested and fully functional
Rated temperature: 1100°C Usable dimensions (WxDxH): 200 x 300 x 150 mm electr. Connection: 230 V, 1.4 kW Heating time: 100 min. Footprint: 752 x 576 x 700 mm Weight: 78 kg
A Rohde chamber kiln is available. Volume: 600l, max. temperature: 1000°C, internal dimensions X/Y/Z: 710mm/870mm/920mm, power: 40kW, insulation layers: 2, heating directions: 4, heating element: grooved refractory brick. Machine dimensions X/Y/Z: approx. 1100mm/1500mm/2300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible.
A Dentsply porcelain firing furnace for dental laboratories is available. Power: approx. 1.2kW, max. temperature: 1200°C, weight: approx. 30kg. An on-site inspection is possible.
Manufacturer : Nabertherm Model: N 875/65HA Year of Manufacture: 2015 Maximum Temperature: 650 degrees C Power Supply: 400 V / 50 Hz Current: 39 / 39 / 39 A Power Rating: 27 kW - Condition: This furnace is in like-new condition. Since arriving at the current facility in 2020, it has never been observed in operation. Employees report that it was used only two or three times at the very beginning. Find more here - .ucymachines/ Contact us at - sales@ucymachines
A DeguDent high-temperature sintering furnace for dental zirconium oxide for sintering pre-sintered zirconium oxide crowns, bridges and frameworks is available. Temperature: 1350°C, machine dimensions X/Y/Z: approx. 500mm/650mm/550mm, weight: approx. 80kg. An on-site inspection is possible.
Description: Vacuum hardening furnace XRETORT 700/25 series Year of Make: 2000 Info: Vacuum furnace system with control unit with pumping station and inert gas system The system stood around for a long time and is not calibrated. Vacuum pump is not included.
A microprocessor-controlled dental ceramic firing furnace is available. Firing temperature: 1200°C, firing chamber diameter: 85mm, firing chamber height: 67mm, machine dimensions X/Y/Z: approx. 280mm/430mm/410mm, weight: approx. 25kg. Documentation available. An on-site inspection is possible.
Manufacturer: Nabertherm Model: RSRC 470/270/13S Year of Manufacture: 2019 Type of Machine : Large-diameter tube furnace Technical Specifications: - Maximum pipe diameter: 470 mm - Heated length: 2700 mm - Number of heating zones: 3 - Furnace chamber dimensions: 670 x 2700 x 670 mm - Maximum temperature: 1300 degrees C - Operating temperature: 1250 degrees C - Rotation control range: 1 to 5 rpm - Electrical power: approximately 120 kW - Nominal voltage: 400 VAC - Connection power: 120 kW/kVA - Outer dimensions (L x W x H): 3150 x 1560 x 1155 mm (without base frame) - Weight: under 3000 kg - Documentation: EC declaration of conformity and operating instructions included Find more here - .ucymachines/ Contact us at - sales@ucymachines
max. temperature: 1280 Grad size of opening: 350 x 250 mm depth of chamber: 500 mm volume: 41 L voltage: 400 V total power requirement: 15,0 kW weight of the machine ca.: 265 kg dimensions of the machine ca.: m - Serial-No.: 305266 - control: NABERTHERM B150 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A complete electrically heated Hindenlang bale-out furnace system for melting and holding aluminium is offered. Design: stationary, heating shell material: vermiculite, Heating capacity: 45kW, melting capacity: approx. 90kg/h, operating temperature: 720°C, max. temperature: 850°C, furnace chamber temperature limit: 950°C, crucible holder: BU-200/BN-200, crucible support height: 65mm, weight: approx. 1100kg without crucible. Equipment: furnace housing with insulation and meander heating elements, lateral emergency drain, temperature monitoring, switchgear rated up to 80A/55kW, crucible breakage detection system, freeze protection, timer, connecting cables, BU-200 crucible and crucible support. Documentation available. An on-site inspection is possible.
0: 1200 °C internal diameter: 210 mm internal length of the oven: 1000 mm total power requirement: 25,2 kW weight of the machine ca.: 0,55 t dimensions of the machine ca.: BTH 1,3 x 1,6 x 1,8 m Hochtemperatur ROHROFFEN - Labor Split - Tube Furnace Kelltool Furnace GAS H2 und N2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. temperature: 1100 Grad voltage: 230 V output: 3 kw range - high tensile: Innen 295x230x125 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
An electric Nabertherm shuttle kiln for firing ceramics, stoneware and soft-paste porcelain is offered. Connected load: 69kW, maximum temperature: 1340°C, volume: approx. 1000l, internal dimensions X/Y/Z: 800mm/1600mm/800mm, control system: Nabertherm C19 program controller. Equipped with automatic exhaust-air flap control, motorized ceiling flap and removable lifting eyes. Overall dimensions X/Y/Z: approx. 1300mm/2200mm/1840mm, weight: approx. 3000kg. Documentation available. An on-site inspection is possible.
Manufacturer: ELIOG Type: KFG-5-1400 Year of Make: 1997 Electrical connected load: 32 kVA Connected load gas: 1450 kW Temperature max. 1400°C Condition of the facility: good, has been modernized in several steps We can offer the facility completely renovated.
temperature max.: . ° internal length of the oven: . mm internal width of the oven: . mm internal height of the oven: . mm total power requirement: kW weight of the machine ca.: t Annealing furnace with extraction system Make: Helmut Peiler 2 pieces available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
temperature max.: . ° internal length of the oven: . mm internal width of the oven: . mm internal height of the oven: . mm total power requirement: kW weight of the machine ca.: t Annealing furnace with extraction system Make: Helmut Peiler 2 pieces available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
degree: 250 °c width: . mm height: mm depth: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m No.8505548 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Electrically heated bogie hearth furnace for a maximum operating temperature of 1,300°C (brick lining designed for up to 1,400°C). Incl. 1 piece of hearth wagon (track-bound) and switchgear (built in 2004). Electrical power: Approx. 170 kW, dimensions usable space (WxDxH): 1,450 mm x 2,600 mm x 1,400 mm.
Heating chamber dimensions: approx. 550 x 440 x 400 mm (400 mm depth) Temperature range: up to approx. 200°C Reference: Wup - Lot 6 Auction-ID: A7-49056-64
A horizontal glass tempering furnace is offered. Max. temperature: 750°C, heating zones: 10, control system: PLC. Equipped with roller conveyor infeed and outfeed with ceramic rollers, high-pressure cooling blower, control cabinets, hydraulic power unit. Inspection possible by appointment.
Machine number: 47537 Operating voltage: 220 V Frequency: 50 Hz Rated current: 14.5 A Connection: 3.2 kW Max. temperature: 1200 °C Internal dimensions: 450 x 300 x 300 mm Reference: STS - Lot 12 Auction-ID: A7-49056-253
Usable furnace width: 600mm, usable furnace height: 310mm, clear passage height: 350mm, furnace zone length: 3500mm, number of heating zones: 3, radiant tube control: On/Off, radiant tube monitoring: via UV cell, max. temperature: 1050°C, operating temperature: approx. 800-1000°C, material processed: transformer and slit-strip cores, net/gross throughput: 750/860kg/h, max. grate load: 250kg, permissible grate weight: 50kg, cycle time per grate: approx. 20min, heating, equalizing, holding: approx. 850°C, approx. 120min, cooling: from approx. 850°C to below approx. 200°C in approx. 180min, number of grates: inlet lock: 1, annealing furnace: 6, furnace neck: 1, cooling section: 9, outlet lock: 0, grate return transport (buffer): 18, grate width: 600mm, grate length: 600mm, grate height: 60mm, overall grate height: 210mm, frame height: 150mm, weight per grate: approx. 50kg, annealing fu ...
Hardening furnace Lg.Nr. 26164 Technical data: - Nominal temperature / continuous temperature infinitely variable up to 1200 ° - Three-sided heating ( bottom + side ) - Temperature control via NABERTHERM Controller C 30 - T. max. 120 min - Drive 400 V / 12 kW - Interior dimensions approx. W 350 x H 250 x D 770 mm - Usable volume 41 L - Space requirement approx. W 950 x H 1370 x D 1600 mm - Weight approx. 400 kg
The system consists of two bell furnaces, maximum temperature: 1100°C, annealing chamber: 2x 1000mm, electrical connection: delta, current rating: 433A, connected load: 300kW, equipment: power control, temperature control, process monitoring, safety controller, emergency stop system, motorized drive for bell movement, air conditioning unit, electrical control cabinet, and control system. Inspection on site is possible.
A Bosch OBD 10/53L 12 and a Bosch OBD 15/54L 17 are available, strip width: 250mm, usable height: 260mm, number of furnace doors: 3, doors: inlet, intermediate and outlet door, strip speed: 1.8m/min, cycle time: 25min, cycle distance: 700mm, operating temperature of decarburizing zone: 760°C, operating temperature of bluing zone: 550°C, heating capacity of decarburizing zone: 84kW, heating capacity of bluing zone: 18kW, evaporator heating capacity: 3kW, evaporator water consumption: approx. 0.5l distilled water/h, energy consumption: approx. 45kWh/100kg net weight, total decarburizing time: 150min, cycle time: 25min, cycles in the decarburizing zone: 6, decarburizing zone temperature: 760°C, holding time: 30min, propane/air ratio for protective gas generation: 1:18, protective gas quantity: approx. 35Nm³/h, propane quantity: 2Nm³/h, air quantity: 36Nm³/h, combustion tower temperatu ...
degree: 500 working heigth: - mm length: 600 mm width: 600 mm depth: 600 mm total power requirement: 21 A / 14,5 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1 x 1 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
total power requirement: 38 kW degree: 500 Grad weight of the machine ca.: 2,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
temperature max.: 1150 ° muffle size (length): Ø 150 muffle size (width): Ø 150 muffle size (depth): 300 mm total power requirement: 3 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 0,8 x 0,5 x 0,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
MARENO EVO10X ist ein Härteofen/Trockenofen für Präzision, hohe Genauigkeit und Zuverlässigkeit. Nutzraum: B350 x H600 x T600 mm. Technische Daten: Max. Temperatur 270 °C; installierte Leistung 16 kW; Anschluss 50 Hz 3x 400 V; Außenmaße L1000 x B800 x H1800 mm. Ermöglicht kontrollierte Wärmezyklen zur Erzielung enger Toleranzen; Einsatzbereiche: Automotive, Luftfahrt, Medizintechnik, Uhrenindustrie, Werkzeugmaschinenbau. Technische Daten ohne Gewähr
DE NABERTHERM N 4000/60HAS ist ein Umluftofen für Wärmebehandlungen mit hoher Präzision, Genauigkeit und Zuverlässigkeit. Nutzraum 1300×1000×2000 mm (4000 l), Ladegewicht max. 3000 kg. 400–600 °C (max. 600 °C); Ventilator 9000 m3/h; Heizleistung 60 kW; install. Leistung 70 kW; Anschluss 3×400 V 50 Hz; Außenmaße 3700×2700×3100 mm. Zubehör: Wasserabschreckbad 2500 l, Zustandsleuchte. Eignet sich für enge Toleranzen; Branchen: Automotive, Luftfahrt, Medizintechnik, Werkzeugbau, Uhrenindustrie. Technische Daten ohne Gewähr
SAFED NIT 17 ist ein Härteofen hoher Präzision, ausgelegt für hohe Genauigkeit und Zuverlässigkeit bei Wärmebehandlungen. Maximale Temperatur 1000 °C. Heizleistung 7 kW; Gesamtinstallierte Leistung 28 kW; Anschluss 50 Hz, 3x 380 V. Maschinengewicht ca. 600 kg; Abmessungen L×B×H 5800×1200×1800 mm. Ermöglicht enge Toleranzen; typische Einsatzbereiche: Automobil, Luft- und Raumfahrt, Medizintechnik, Werkzeugbau, Uhrenindustrie. Technische Daten ohne Gewähr
SOLO 221-15/25 ist ein Anlassofen, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitskapazität: Volumen 4,5 l; maximale Temperatur 650 °C, geeignet für Wärmebehandlungen kleiner bis mittlerer Werkstücke. Technische Daten: installierte Leistung 4 kW; Anschluss 50 Hz, 3x 400 Volt. Ermöglicht enge thermische Toleranzen und ist geeignet für Automotive, Uhrenindustrie, Werkzeugmaschinen, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr
BOREL 4.5 / 650 S ist ein Härteofen, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Maximale Temperatur: 650 °C; Volumen: 4.5 l. Anschluss: 50 Hz, 3x 400 Volt. Erzielt enge Toleranzen und eignet sich für Branchen wie Automotive, Luftfahrt, Werkzeugmaschinen, Medizintechnik und Uhrmacherei Technische Daten ohne Gewähr
SAFED 6SGR50/70 ist ein Härteofen, ausgelegt für präzise, hochgenaue und zuverlässige Härteprozesse. Maximale Temperatur: 650 °C. Anschluss: 50 Hz, 3x 400 Volt; Anschlussleistung: 3.5 kW. Entwickelt für konstante und reproduzierbare Wärmebehandlungen; geeignet für Automotive, Luftfahrt, Werkzeugbau, Medizintechnik und Uhrmacherei. Technische Daten ohne Gewähr
Used TEL Alpha-8SE-E Vertical Gas Diffusion Furnace Manufacturer: TEL Tokyo Electron Model: Alpha-8SE-E Manufactured: 11.2000 Sr. No. M000000Y5670 No books or documentation. Pumps/Motor: 2 x Toshiba 3 phase induction motor. 480 Volts, 60 Hz. Auction-ID: A1-48529-39
Last maintenance in 2024 Auction-ID: A1-49186-127
Key data: 300 °C, 1000 mm, 800 mm
Technical data Manufacturer: Steel Type: 8220 Type: Industrial Furnace / Chamber Furnace Condition: Used Other technical data according to the nameplate Facilities Robust and durable construction Electric heating Temperature control for precise processes Good heat distribution in the working area Suitable for professional use Areas of application Heat treatment of metal parts Annealing and tempering Drying processes Preheating of workpieces Laboratory and testing applications Research and development Interior chamber dimensions: B1000 H1000 T800
Last maintenance in 2024 Auction-ID: A1-49186-125
Two dental furnaces are offered, one Zirkonzahn sintering furnace and one Nabertherm preheating furnace. 1) Zirkonzahn Keramikofen 1500 sintering furnace, Year of manufacture: 2006, with control unit, firing chamber volume: approx. 0.6l, maximum temperature: 1500°C, power: 1500W, furnace weight: approx. 75kg, furnace dimensions X/Y/Z: approx. 390mm/690mm/490mm. 2) Nabertherm preheating furnace in need of repair with P 320 controller, program memory: 9 programs, program steps: 16, chamber volume: 9l, maximum temperature: 1100°C, when the Nabertherm furnace is switched on, an ERROR message with an error code appears, the exact cause of the fault is unknown. An on-site inspection is possible.
x-travel: 800 mm y-travel: 900 mm z-travel: 620 mm b-axis: +/- 120 ° c-axis: 360 ° 0 Control: HEIDENHAIN iTNC 640 spindle taper: HSK 63 spindle turning speed - stepless: 15000 U/min tools in tool magazin: 64 total power requirement: 10/17 kW weight of the machine ca.: 21.5 t dimensions of the machine ca.: 3 x 4.5 x 3.6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 300 °C
Manufacturer: Reinhardt Model: Titan 6700 Year: 2023 Condition: Used Stock number: 9482 Maximum temperature: 50-300 C Working Area: 6.7 m³
Offer 26187 Technical data: - Nominal temperature / continuous temperature infinitely variable up to 900 ° - Temperature control via NABERTHERM Controller C 40 - Heating from both sides, back wall, door and floor - Motorized lifting door - T. max.ca. 120 min - Drive 400 V / 59 kW - Interior dimensions approx. W 1000 x H 550 x D 1900 mm - Usable volume approx. 950 L - Space requirement approx. W 2100 x H 2800 x D 2800 mm - Weight approx. 2900 kg
General Description Industrial electric chamber furnace designed for heat treatment processes including tempering, stress relieving, preheating, drying and general thermal processing of metal components. The furnace is equipped with a front-loading insulated door and roller-supported loading platform for handling heavy workpieces. Technical Details Machine type: Electric chamber furnace Heating: Electric resistance Maximum temperature: 600 °C Internal chamber dimensions: Approx. 1,450 × 1,000 × 600 mm (W × D × H) Approximate chamber volume: 0.87 m³ (870 L) Roller-supported loading platform Heavy-duty insulated door Analog temperature indicator (0–600 °C) Electrical control cabinet Electromechanical control system Condition Fair used condition. The chamber lining appears largely intact, with the roller loading platform, insulated door, temperature indicator and ...
Conveyor system in front of furnace L x W x H 10.8m x 1.1m x 0.86m, with scissor table Auction-ID: A1-49382-3
Conveyor system in front of furnace L x W x H 10.8m x 1.1m x 0.86m, gas output 530kw, without ant Auction-ID: A1-49382-2
Max Weishaupt steam oven with oil burner, in very good maintained condition Length= approx. 190cm Width= approx. 100cm Height= approx. 180cm Auction-ID: A1-49805-6
maximum number of results exceeded
please refine your search
250 € 
