melting furnace used for sale

The RE100 tempering oven is a product manufactured in the former GDR and dates back to 1982. It has a rated output of 18 kW and can reach a maximum temperature of 300 degrees Celsius. The furnace type RE100 is particularly robust and suitable for various industrial applications where high temperatures are required. With external dimensions of 1.8 meters in length, 1.3 meters in width and a height of 2.05 meters (internal dimensions 1x1x1.3m), the tempering furnace offers enough space for larger material batches. Although the product has been around for several years, it is in good condition and functional. ---------------------------------------------------------------------- -------------------------------- The tempering furnace RE100 was manufactured in the former GDR in 1982. This furnace type has a rated power of 18 kW and a maximum operating temperature of 300 degrees Celsius. ...

ELMETHERM 27 x 4.4 m furnace for plastic pipes was manufactured in 1997 in France. The furnace is used in the process of heating and shaping single-layer plastic pipes with a maximum wall thickness of 3 mm and a diameter from 8 mm to 35 mm. The workpieces are preheated in the machine’s heating pipes and then vulcanised and shaped at 168°C. At the very end, the plastic pipes are moved to a special cooling tunnel, where they are cooled with air at 42.8°C. Automated heat treatment of large quantities of workpieces is possible due to the use of conveyors in the machine that transport the workpieces between the different stages of the process. All functions, such as switching on heating or cooling, are controlled via the SCHNEIDER MAGELIS HMI touch panel. The gas furnace for moulding PA plastic pipes weighs approximately 35000 kg. Technical data of the ELMETHERM 27 x 4.4 m industri ...

FRANCE ETUVES XXL01 industrial furnace was manufactured in 2013. The furnace used in curing, polymerisation, coating, heating and drying of workpieces has a structure made of high quality steel with a 1000 litre capacity utility chamber. A large opening door allows for quick and easy loading of workpieces without weight limit into the chamber. The air from the top of the furnace is drawn in, heated to 200°C and blown out from the rear of the chamber onto the workpieces via an efficient ventilation system. All of the furnace’s heating elements are ideally positioned in the airflow, guaranteeing fast and efficient heating. In the case of a malfunction, the fan and the heating process are automatically stopped. The machine is equipped with a PID control C3000 with functions such as real-time temperature display, start delay and cycle repeat. The total weight of the furnace is 500 kg.  ...

furnace 1200 Temperature range 10 - 1200C inner chamber dimensions 1x1x2m (possible various size) Auro door PLC Termička obrada metala, cementacija, kaljenje, poboljšanje, žarenje, otpuštanje, normalizacija, ispravljanje ručnom i hidrauličnom presom, plameno kaljenje Jamske peći sa zaštitnom atmosferom Za jamske peći sa zaštitnom atmosferom se koriste elektrootporni grejači i gasni gorionici. Mogu obavljati sledeće termičke obrade: Žarenje kaljenje otpuštanje poboljšanje rekristalizacija normalizacija Upoznavanje sa klasičnim i novim postupcima termičke obrade metalnih materijala kao što su odgrevanje, difuziono žarenje, heterogenizacija, rekristalizaciono žarenje, potpuno žarenje, meko žarenje, izotermalno žarenje, normalizacija, kaljenje sa i bez polimorfnog preobražaja, starenje i otpuštanje, sa posebnim osvrtom na postupke termohemijske obra ...

Electrically heated conveyor furnace

Gas-heated conveyor belt furnace

Kuhnast UV1 furnace, model QSTS_3D_V1_2012006, SN: 2012006. Good technical condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,0 ...

Debinding and sintering chamber furnace, make Nabertherm type: LH 280/13 DBS temp. max.: 1300°C internal dimensions (w x d x h): 750 x 750 x 500 mm external dimensions (w x d x h): 1250 x 1750 x 2100 mm loading weight : max. 150 kg power: 44 kW heating: 5-sides heated control zones: 1 Process control controller: yes weight: 700 kg voltage: 400 V 3/N current consumption: 63 A - With an air heater under the furnace, pre-heated air with a temperature of up to 400°C can be flushed into the furnace chamber during the debinding phase. - Controllable cooling housing with autom. ball valve - Automatic exhaust damper - Automatic exhaust flap - Monitoring of fresh and exhaust gas volume flow, as well as furnace chamber pressure by differential pressure monitor.

oven 10 - 1150 Celsius inner 1x1x2m plc auto door various size possible Härten Vergüten Härten von Kaltarbeitsstahl Härten von Warmarbeitsstahl Induktivhärten Flammhärten Anlassen / Glühen Bainitisieren Entspannen / Anlassen Anlassofen Aushärteö fen Chargentrockner Drucksinteröfen Durchlauföfen Kipp – Tiegelöfen Laboröfen siehe Lack – Einbrennöfen Lack – Trockenöfen Messing – Glühöfen Muffelöfen Magnesium –Schmelzöfen Ölversorgungsanlagen Ölbrenneranlagen Retortenöfen Teil-Vakuum Rollenherd - Durchlauföfen Rohrglühöfen Salzbadöfe n Schmiedeöfen Schachtöfen Stoßöfen Schüttelherd - Härteöfen Schutzgas Topfglühöfen Tiegelschmelzöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce  ...

Kuhnast UV4 furnace, model QSTS_3D-550_2017001, SN: 2017001. In good technical condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,5 ...

Kuhnast UV6 furnace, model QSTS_3D-550_2017003, SN: 2017003. Good condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (pai ...

UV2 furnace, model QSTS_3D-1000_2011001. Good condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in full).

specifications: - Nominal /permanent temperature can be selected up to approx. 1150 ° - digital temperature setting - Timer - Interior size approx. W 250 x H 190 x D 400 mm - Loading by front door - Opening width of the front door B 240 x H 190 mm - Drive 400 V / 7.5 kW - Base H 800 mm - Space requirement approx. W 900 x H 1450 x D 1100 mm - Weight approx. 120 kg

ERSA HOTFLOW - 7 Soldering furnace / tunnel dryer / belt dryer / continuous dryer Type: HOTFLOW – 7 Convection oven as soldering oven / tunnel dryer / belt dryer / continuous dryer for drying sheet materials on top and bottom. 4 heating zones at the top, 4 heating zones at the bottom, for drying on both sides. Rolling bars at a distance of approx. 4.5 cm on 2 transport chains as a support for plates Temperature range from 20° to 300°C Rated power Pn = 72 KW Nominal current In = 106 A Voltage: 3 x 400 / 230V Back-up fuse: 3 x 125 A Frequency 50 Hz Power: 67 KW Year of construction: 2000 Dimensions: Length: 5250 mm Width: 1300 mm Height: 1750 mm (incl. warning light) Height: 1450 mm (without warning light) Dry section: Length of heating zones: 3300 mm Transport width: 500 mm Exhaust pipes and additional fan can be supplied. Circuit diagrams are ...

3 EMOD electric motors are for sale for Degussa chamber furnaces type GKU ... 2 type 132S / 6 unused with the following performance parameters: Power: 2.2 KW Speed: 970 Flange: d = 250mm Protection class: IP 54 1 pc.type 132S / 4 unused with the following performance parameters: Power: 4 KW Speed: 1.430 Flange: d = 250mm Protection class: IP 54 Sold without warranty or guarantee!

type: gas-heated drive-through chamber furnace internal dimensions: (w x h x d): 2200 x 2350 x 3000 mm number of control areas: 2 Max. loading weight: approx. 2,5 t PLC: Siemens S7

Ceramic furnace,Gravers Bjerre type C-R,5,5 kW,max. temp. 1150°C

type: gas-fired rotary hearth furnace with central recuperator and air preheating max. temperature: 1300°C max. furnace output: approx. 700 kg/h clear door opening (w x h): 600 x 400 mm number of burners: 6 number of control areas: 3 heating capacity: 720 kW el. total connected load: approx. 15 kVA PLC: Siemens S7

- Manufacturer: CFS – GEA - Machine number: Cook Star 1000/12/75 – 382 - Year built: 2006 - Type: thermal - Heating capacity: 1200 kW - Total power: 102 kW - Current: 175 A - Supply voltage: 460 – 3 – 60 Hz - Number of turns: 2 x 6 - Treadmill: Omnigrill small department - Max. belt load: 15 Kg / m - Cooking length (Net): 160 m - Retention time (min-max): 6.5 – 195 min - Product speed: (max-min): 24.6 – 0.82 m /min - Entrance height: 1150 mm - Output height: 1150 mm - Weight: 40000 Kg (40 t) THERMAL OIL SPIRAL - Thermal oil spiral capacity: 1200 kW - Max. air temperature: 200 °C - Thermal oil inlet temperature: 300 °C - Volumestream thermal oil: 2 x 42 m3/h - Thermal oil spiral resistance and temperature regulation: 2.24 bar - Thermal oil spiral with max. permissible suppression: 8 bar - Oil volume incl. temperature regulation: 1000 L - Connection ...

Capacity: 3000 kg Production capacity: 1500 kg/h degree: 1200 °c heating capacity: 1700 kcal/KW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. temperature: 1150 Grad size of opening: 260 x 160 mm depth of chamber: 450 mm total power requirement: 8 kW weight of the machine ca.: t Hardening furnace The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. temperature: 420 Grad size of opening: 200 mm depth of chamber: 350 mm total power requirement: 2,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1180 °C

AMP VBF-60/60/100-1.5 horizontal vacuum furnace was manufactured in Poland in 2012. The machine, which has a horizontal construction with a large cylindrical heating chamber, is designed for, among others, annealing, degassing, brazing and hardening of long workpieces with a maximum weight of 600 kg, without the risk of deformation. The AMP vacuum furnace ensures that a constant temperature of 1180°C is maintained throughout the treatment, due to the insulation inside the heating chamber in the form of a graphite mat fixed to the chamber casing by molybdenum rods with graphite composite pads. The capacious heating chamber also contains heating elements, charge holding supports and cooling nozzles through which cooling gas flows during the cooling cycle. All parameters, such as vacuum, temperature course and cooling gas pressure, are programmed in a special controller, installed in a  ...

max. temperature: 750 Grad size of opening: 600x600 mm depth of chamber: 1800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. temperature: 1350 Grad size of opening: 300 mm depth of chamber: 600 mm total power requirement: 25 kW weight of the machine ca.: 1,5 t : : : : : Hardening Furnace Temp. 1350 °C H E R E A U S Electrically heated Hardening Furnace with Double Chambers for preheating and hardening. Model DKM 5 Year 1965 ______________________________________________________________ Temperature range max. chamber 1 1.000 °Celsius Temperature range max. chamber 2 1.350 °Celsius Door opening 300 x 200 mm Chamber size width x height x depth 300 x 200 x 500 mm For chamber 2 300 x 200 x 600 mm Working height above floor 1.050 bzw. 1.625 mm Heating up time 20°-1.350° = hardening chamber 2,75 h Heating up time 20°-1.000° = preheating chamber 2,00 h Exter ...

Glasbeek Finish Gas Poederwand Chamber Oven 250°C Glasbeek Finish Gas Poederwand Chamber Furnace Maximum temperature 250°C Electrical connection 8 kW 51 KW 3x400V YOC 2003 Approximate internal dimensions (W1200mm x D3100mm x H1400mm) with loading trolley L2800 x W1020mm Approximate external dimensions LxWxH approx. 320x240x250 cm

Glasbeek Finish Gas Chamber Furnace Type 003.05 Glasbeek Finish Gas chamber furnace Type 003.05 With loading trolleys Maximum temperature 200 ° C Approximate internal dimensions (W1900mm x D2950mm x H1800mm)

Glasbeek Finish Gas Chamber Furnace Type G.11.01, 250 ° C Glasbeek Finish Gas chamber furnace Type G.11.01 Maximum temperature 250 ° C Approximate internal dimensions (W1400mm x D1900mm x H1985mm) 6m³ Bogie dimensions approx. (1000 mm x 1800 mm x H250 mm) YOC 1992 3 x 380 volts 41 kW

1. HEAT CLEANING OVEN Cycle time : 2 - 4 hours Loading : Trolley, manual loading from the door side INTERNAL USEFUL DIMENSIONS Length : 1.870 mm Width : 1.460 mm Height : 1.500 mm (gross) 1.000 mm (net) Interior volume : 4,1 m³ Insulation : Ceramic wool + Rock wool Insulation thickness : 175 mm Maximum temperature : 1.260˚C Heating type : Direct heated Heating source : Natural Gas, LPG or Diesel Combustion chambers : 2 sets Burner capacity : 2 x 350.000 kcal/h Burner : RIELLO (Italy) Overheating control : Stainless steel water spray nozzles – 2 pc Safety control : Stainless steel water spray nozzles –4 pc Oven safety door : 1 set Electrical panel : PLC controlled, Schneider Electric branded switchgear components Control system : Touch screened panel and software system MATERIAL Oven body : Structural steel and sheet metal, spray pa ...

Water-cooled high-frequency induction continuous furnace for inductive local heating, activation of getters, hardening & starting and much more

AGEING OVEN FOR ALUMINUM EXTRUSIONS The aging furnaces are used in the aluminium profile industry for the elimination of internal stresses of aluminum materials after extrusion and for hardening them. The ovens are custom designed as batch type with high speed ventilation and high efficiency in order to achieve needed hardness demand on the aluminum work pieces. Motion of the batches is done by a ground trolley or a ground conveyor system. The oven door could be an automatic guillotine type or manual hinged door. The whole process is PLC controlled, data logging option is an advantage during the operation. Electricity, liquid or gas fuel is used for heating the ovens. The ageing ovens are CE certificated and conforms to the European Norms.

Electroventilated heating furnace Idrocalor mod MOD: EVE Year of construction 2017

High temperature debinding furnace, make GERO type: HBO 50/13-3 2G heating: electrical useable space: ø400 x 400 mm temperature: max. 1.300°C ventilation: exhaust fan during the cooling phase and activated cooling fan ultimate vacuum: 10 mbar exhaustion time: ca. 5 min nitrogen: inlet pressure min. 3 bar oxygen: inlet pressure min. 3 bar

El. heated chamber furnace, make VEI type: VEI_KO_EB max. temperature: 450°C connected load: 28 kVA air flow: horizontal usable dimensions (w x h x d): 600 x 500 x 2000 mm

Key data: 650 mm, 450 , 600

We always have convection comb stoves on offer. Convection chamber furnace electr. 650°C with manual lift door Demo unit, unused, 12 months warranty, immediately available -Temperature max.: 650 °C -Volume of furnace chamber: 120 liters -Exterior: 885 x 1420 x 1540 mm (W x D x H) -Furnace chamber: 450 x 600 x 450 mm (W x D x H) -Controller C540, 10 programs each 20 segments -Temperature uniformity: ± 5°C according to DIN 17052-1 -Additional equipment: Manual lift door, 1 hand operation -Permissible batch weight: 120 kg with distributed load -Slide-in strips included: for 2 levels -Connected load: approx. 13 KW -Fan capacity : approx. 500 m³/h -Connection: 400V 3/PE 50 Hz, without RCD -Documentation Viewing in our warehouse by appointment.

High temperature furnace, make GERO type: ULO 40/10- 2G heating: electrical useable space: ø400 x 600 mm temperature: max. 1.000°C room conditions: ventilation / exhaustion voltage: 400V connected load: 25 kVA control: MODCON with Modvis 2000

Pizza open Middleby Marshall

Technical data Max. temperature: 500 °C

Key data: 850 mm, 450 , 600

We always have convection comb stoves on offer. Convection chamber furnace electr. 850°C with manual lift door Demo unit, unused, 12 months warranty, immediately available -Temperature max.: 850 °C -Volume of furnace chamber: 120 liters -Exterior: 885 x 1420 x 1540 mm (W x D x H) -Furnace chamber: 450 x 600 x 450 mm (W x D x H) -Controller C540, 10 programs each 20 segments -Temperature uniformity: ± 5°C according to DIN 17052-1 -Additional equipment: -Motor-controlled supply and exhaust air flaps -Manual lift door, 1 hand operation -Permissible batch weight: 120 kg with distributed load -Slide-in strips included: for 2 levels -Connected load: approx. 12-13-14 KW (according to connection voltage) -Fan capacity : approx. 500 m³/h -Connection: 380- 400- 415V 3/PE 50 Hz, without RCD circuit breaker -Documentation Viewing in our warehouse by appointment.

(1) Gas (2) Fuel (3) Electric: 0   Temperature maximum: 0 C° Capacity (kg): 0 kg Technical data Working space: Width: 600 mm Height: 650 mm depth: 800 mm External dimensions: Length: 1200 mm Width: 900 mm Height: 2000 mm

Key data: 300 mm, 1200 , 670

We always have convection comb stoves on offer. Demo unit, unused, 12 months warranty, immediately available -Model with wheels -Temperature max.: 300 °C -Volume furnace chamber: 1050 liters -Exterior: 1470 x 970 x 1920 mm (W x D x H) -Furnace chamber: 1200 x 670 x 1400 mm (W x D x H) -Controller C550, 10 programs each 20 steps Controller has Wi-Fi and app as standard -Horizontal, forced air circulation results in a Temperature uniformity according to DIN 17052-1 of better than +/− 5 °C in the empty usable space (with the exhaust air flap closed) -Permissible batch weight: 250 kg with distributed load -Gratings included: 4 pcs -Max number of gratings 14 pcs -Additional equipment: bushing for thermocouples I-Ø 44 mm -Connected load: max 9.3 KW -Fan capacity : approx. 500 m³/h -Connection: 380-415V 3/N/PE 50 Hz -Net weight : 450 kg - Documentation, CE declaratio ...

(1) Gas (2) Fuel (3) Electric: 0   Temperature maximum: 0 C° Capacity (kg): 0 kg Technical data Max. temperature: 1000 °C Execution: hardening Working space: Width: 100 mm Height: 140 mm depth: 300 mm External dimensions: Length: 1000 mm Width: 850 mm Height: 1400 mm

(1) Gas (2) Fuel (3) Electric: 0   Temperature maximum: 0 C° Capacity (kg): 0 kg Technical data Max. temperature: 1000 °C Execution: hardening Working space: Width: 100 mm Height: 140 mm depth: 300 mm External dimensions: Length: 1000 mm Width: 850 mm Height: 1400 mm

DBK David + Baader GMBH Industrial Furnace Electrically heated convection oven Type ITHU 150° Type ITHU Identification number 871126 Year of construction 2006 Usable space/furnace 8,393 m3 Steam room/furnace 11.5 m3 Weight 3000kg Rated voltage 400/230V 50Hz Power supply 21KVA Heating capacity 18 KW Rated current 30 A Pre-fuse 50 A Protection class IP 43 Highest drying temperature 120° exhaust air volume flow/furnace 95 m3/h

Key data: 260 mm, 1900 , 1430

We always have convection comb stoves on offer. Demo unit, unused, 12 months warranty, immediately available With safety system for solvent-based substances according to DIN 1539 -Inside w x d x h 1000 x 1000 x 1500mm -Outside w x d x h 1900 x 1430 x 2315 mm -Capacity 1500 liters -Tmax 260°C -Controller P570/ 50 programs each 40 segments freely programmable -NtLog for controller recording the data via USB stick -Air circulation 3600 m³/h -Exhaust gas volume min. 390m³/h -Additional equipment: drive-in rails -Connected load 39 KW -Weight 1150 kg -incl. documentation, CE declaration We are happy to offer installation and commissioning. Viewing in our warehouse by appointment.

DBK David + Baader GMBH Industrial Furnace Electrically heated Convection oven Type ITVU 200° TYPE ITVU Identification number 870233 Year of construction 2006 Usable space 2.8 m3 Steam room 3.9 m3 Weight 850 kg Temperature 200° Rated voltage 400/230V 50Hz Power supply 21 kVA Heating capacity 18 kW Rated current 31A Pre-fuse 50 A Protection class IP 43 Exhaust air volume flow 230 m3/h

Control: P 2000 Technical data Max. temperature: 250 °C Execution: drying Working space: Width: 600 mm Height: 400 mm depth: 600 mm Power of the heating: 18 kW Ampere: 25 A Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 250 kg External dimensions: Length: 800 mm Width: 800 mm Height: 1500 mm Various accessories: Ventilating / pulsated air

Key data: 800 mm, 1400 , 2700

in stock, as good as new, with 12 months warranty -max. temperature 800 °C -Application temperature 750 °C -Heating time from 15 °C to 700 °C approx. 3-5 hours -Insert mass complete 2600 kg -Connected load heating 4 x 47.25 kW = 189 kW -2 compact fans -Furnace circulation capacity approx. 3,000 x per hour -Control zones 4 pieces -Program control IMAGO 500 -Touch panel TP 700 Color -Overtemperature controller -Thermocouple regulator 4 x NiCr/Ni type K; Class 1 -Thermocouple overtemperature 2 x NiCr/Ni type K; Class 1 Furnace volume 6.0 m³ Internal dimensions: Width (clear) approx. 1400 mm Depth (clearance) approx. 2700 mm Height (clearance) approx. 1600 mm Height of furnace base approx. 585 mm External dimensions: Width (without switchgear) 2300 mm plus switchgear approx. 500 mm Depth 3300 mm Height (with lifting door) 4200 mm (transport height 3100 mm)  ...

Technical data Max. temperature: 950 °C Working space: Width: 100 mm Height: 100 mm depth: 300 mm Total installed power: 3 kW Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 150 kg External dimensions: Length: 1000 mm Width: 700 mm Height: 1100 mm Various accessories: Protective furnace gas device

Tunnel Type Annealing Furnace Mioba Mfg: Mioba Year of Mfg. 2008 Temperature 450 – 950 C Fuel: Natural Gas 15 Zones with a total of 144 Burners Plate thickness 3-120 mm Plate width 700 – 3.800 mm Plate length 16.500 mm Max Plate with thickness of 40 mm: 3200 x 12.000 mm Max Plate with thickness of 8 mm: 2500 x 10.000 mm Special roll load 2.260 kg/M 7 Conveyor Roll Sections; total 177 centrifugal casted rolls Speed 0,25 – 25 M/Min. Furnace Length 80 Meter; inside width 3900 mm