We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,308 used machines on RESALE, but how to find them? Machine Search
used
Agitator tank, agitator tank, agitator tank, agitator tank, silo system, transport silo, tank, fertilizer storage silo, melting tank, melting tank -Material: stainless steel -Bracket: for agitator -Content of the tank: 1.3 m3 -Inside diameter tank: 1230 mm -Interior height tank: 1120 mm -double-walled container: can be cooled or heated -Equipment: spout below, on feet, with agitator holder (without agitator) -Transport dimensions: 1280/1300 / H2100 mm -Weight: 430 kg
used
Heating hose, glue melter, glue machine, hot glue machine, industrial hot glue gun -Type: 2314 -Connection: 220 V 210 W -Heating capacity: -Total length: 1500 mm -Price: per piece -Number: 2x available -Weight: 2.2 kg
used
MURAT - NR 241 - cutting, milling and screwing of reinforcement steel MURAT - KD 658/20 - 4 head welding machine MURAT - CN 770/20 - corner clean machine Capacity Min. 100 windows / 8 hours, Max. 120 windows / 8 hours All these machines make automatic production line for PVC systems. The price includes these three machines above and transporter of the frames between welding and corner cleaning. MURAT - NR 241 - Details: All sawing, routing, drilling, reinforcement steel screwing, marking and end milling operations on PVC profiles are gathered in one machine controlled by computer. Stacking of 10 profiles (max. 6,5 m length). Manual barcode labeling system integrated with single-lines. Servo controlled automatic swing of the saw to all angles between 30° and 150° with 0.1° accuracy. Drain slot routing, drilling and routing at variable angles. Automatic scr ...
used
Aluminum Casthouse for sale:, Tilting rotary drum oven MASTERmax-: 3TB9, Capacity: 9 to 19 tons., Burner power: 3 MW, Electrical connection load: 88 kW, Typical power consumption: 400 - 450 kWh/t. for mixed scrap, Throughput: up to 70 t. Scrap/day/3 shifts, Complete with 2.0t linear charging machine. load, automatic natural gas/oxygen burner, weighing system and SIEMENS SIMATIC S7 PLC control., 2 pieces – spout distribution channel from the rotary drum oven to the holding ovens, Striko Westofen holding oven HR-T 10,000 500, Capacity: 10 tons, Burner: 3 gas/air burners with a total of 1.3 MW Melting capacity: 500 kg/h, Electrical connection load: 23 KW, Complete casting furnace for alloying and casting with ramp for charging ingots and alloying elements, automatic bath temperature control, flushing blocks with nitrogen/argon flow control, hydraulic manual tilt and SIEMENS SIMATIC S7 PLC ...
used
Stephan Universal Machine for the production of processed cheese, convenience products, vegan spreads and confectionery. Previously used in the processed / melted and cream cheese production (vegan as well). Machine bowl with top slide and a bottom valve, lid and side covers are all made of stainless steel. Machine frame in painted steel. The bowl is equiped with a double jacket for heating/cooling on the jacket including all valves, 4x direct steam injection nozzles for direct injection of (culinair) steam inside the product, temperature sensor inside the product, 3x twin cutting blades, max working pressure in the bowl -1 / 0,3 bar (protected with overpressure valve), max temperature in the bowl 95 °C, bowl volume: 300 liter, 1x infeed hydraulic slide gate on the top for main product including big up and down movable hopper (hydraulic), 1x outfeed valve at the bottom for the outfeed o ...
used
Kustner-Sterilchoc FP cooking & sterilzation process installation, UHT in continuous mode, enabling to reach an advanced bacteriological stability and security of you finished product. Output: 250 - up to 2.000 kg/h (depending on configuration). Continuous, efficient and flexible production process which can be regulated during production. Advanced economical caloric process balance. Fully stainless steel executed construction. Minimum floor imprint. CIP cleanable. Waukesha lobe pumps, model 034 and 030, year 1999. Control panel with Siemens S5 PLC control for easy control and operation. Including pre-mix vat with 2 stainless steel augers and outfeed lobe pump (Waukesha, model 034, motor 4 kW). Working principle: after the pre-mix is added to the pre-mix vat and melting salt is added, the continuous processing takes place in 3 successive stages; 1st step: heating up to 85/90°C by satura ...
used
Fully Automated 4 Clamps Perfect Binder With PUR Gluing Unit from SM Klebetechnick GX2311, AGE 2009, Serial No. 08103754, Book Size: Max. 320x320mm, Min. 145x105mm, Cover Size: Max. 320x660mm, Min. 135x225mm, Book Thickness: 0,3 to 65mm, Cover Weight Range: 81,4 - 302,4 g/sqm, Book Weight Range: 60 - 135 g/sqm, Cover Pile Height: Max. 150mm, Milling Depth Adjustment From 0 To 4mm, Speed: 1350 Cycles/Hour, 4 Creasing Positive/Negative, 2 Creasing, Palmar For Automatic Books Adjustment, Color Touchscreen Panel, Book Thickness Input Caliper SI-470A, Cover Feeder Suction, Supersonic Double Feed Detect Sensor, Glue Tank Unit, Lateral Side Glue, Horizon SI-470A Delivery Conveyor, Smoke Extractor , Power Required: 400V Rotary Current 16A, 6,5 KW For Adhesive Binder and 400V Rotary Current 16A, 6,0 KW For Melting Unit, Standard Accessories
used
Processing both PVC dry blend / PVC pellets ‑ Special design extruders for a perfect PVC melting and uniform plasticization ‑ Specific rotating dies for an even material flow and thickness distribution ‑ Automatic calibration cages and collapsing boards ‑ Fully automatic winding stations ‑ Water cooling circuit on specifics and key points of the lines ‑ Easy machine operation by LCD touch screens ‑ High level of automation and process optimization solutions.
used
cartoning machine Tecmapack FM2501 power supply 400V/3F / 6kW gluing with hotmelt glue machine output: 800 pcs/h (applies to both formats) supported format: carton 20 pcs fi75mm 390x300x110mm 390x300x85mm and 10 pcs fi75mm 390x150x110mm 3902x150x85mm designed for packaging plastic packaging with a diameter of 75 mm after modification and others control system - Telemecanique - Modicom TSX melting device - Nordson ProBlue4 low operating costs, easy format change, simple format parts the machine was used in combination with a grid inserter for the 20-pc carton version
used
Inv. Num. : 5843 Type: MBS 6000 Producer: FUCO-HEG Created: 2019 Parameters: Control system: Siemens Gas flow: 7-15 l/min Carburetor Head: Steel Crane Systems ST1004 Headstroke: 4 m/min Weight: 800 kg Length: 1000 mm Consumables: nitrogen and argon Purpose: Degassing and purification of aluminium melts with nitrogen or argon with a maximum pressure of 5 bar
used
Büchi B 540 Melting Point Determination Visual melting and boiling point device Parallel determination of 3 samples 9 Temperature Programs
used
Holtrop Jansma-AFS clean air extraction with compressed air cleaning, auger discharge, rotary lock, chip fan, return air with summer/winter gate valve and fire protection device Type: OSFS 185 Year of construction: 2005 (2015 new turnstile and new control system) Clean air extraction Suction supports: ø700 mm + ø700 mm Length: 3,500 mm Width: 2,300 mm Height: 6,200 mm (onderbak 2,700 mm + bovenbak 2,700 mm + 800 mm fans) Capacity: 21,000 m3 /hour Chip fans: 2 15 kW, 380V, 56 Amp, 10,500 m3/uur, 3,000 tpm, 3,850 Pa, Type: RL E 550130 Filter surface: 185 m2 Filter tubes: 150 stuks Length of filter tubes: 2,200 mm Diameter of filter tubes: 180 mm Cleaning: Compressed air cleaning Flame protection: Sprinkler installation with fire brigade connection Screw: HJ STH-380 12 tpm Turnlock: HJ ZRS-300, 31 tpm Hopper dimensions: 250350 mm Transport fan: Connection diamet ...
used
Hot needle micro perforation machine, make LaserPin (IT), year 2020, - Usable width for micro-perforation = 1400 mm, - Maximum speed = 250 meters/minute, - Diameter of holes = 0.3mm to 2.8mm, - Maximum temperature = 400°C, - Heating power = 37 KW, - Touchscreen control panel, The machine was bought in mid-2020 and only used for less than 100 hours, HOT MICROPERFORATORS = With the hot needle technique, the hole is created by the melting of the material caused by heated needles., The pin cylinders are mounted on a perforation roller. They are heated to a temperature of 400°C by special lamps., This technology creates homogeneous holes and was developed in the 80s., An industrial standard control cabinet system with WiFi modem (purchased separately and, configured) for wireless connection to any existing inline production system., User-friendly and multilingual control panel with addition ...
used
Description: • Hotmelt Glue Applicator • Serial number 112804 • Tank capacity 4 liters • Melting capacity 5 kg/h • Service temperature from 20 °C up to 200 °C • Transport dimensions 1200 x 800 x 800 mm Approx. Onsite Dimension. (l x w x h): 620 x 330 x 620 mm, weight approx.: 50 kg
new
Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-2000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work fr ...
new
Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-3000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 3000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work fr ...
new
Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-1000-N QiLin The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 1000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multipl ...
used
Zig - Zag Veneer Splicing Machine Kuper Type: FW-Pimus (special model) Year of construction 2008 Nominal current 4 A Voltage: 230 V Specifications: Stand projection: 920 mm Working height: 950 mm Veneer thickness: approx. 0.4 to 2.0 mm (also thick veneer) Feed in 3 stages: approx. 10 to 23 m/min 3 K heating system. The new temperature control ensures optimal melting results of the adhesive thread and thus ensures a perfect connection. Discus discs with tolerance compensation mechanism Electrically controlled thread tear-off roller new heating system with standstill control Frequency converter controlled drive Space requirement: approx. 1,400 x 560 x 1,470 mm Incl. accessories
used
Code: 0256 Brand: STEFANI Model: ACTIVA 1-73 - CE Standard Automatic edge bander with grinding unit for edges in wood, veneer, pvc, abs, furniture and various - CE Standard Technical data: Edge thickness min/max 0,6-25 mm Coil material thickness min/max 0,3-3 mm Min/max panel height mm 10-60 Min panel width mm 70 Automatic pressure bar lifting Feed speed variator 8-30 mt/min Controlled guide before grinding Group of 2 grinders for panel grinding - N° 2 motors - Suction mouth diameter 120 mm Glue tank pre-melting unit Gluing unit: N° 1 pneumatic pressure roller diameter 180 - N° 3 pneumatic pressure rollers diameter 100 Soundproof protection cabin Tilting end cutting unit - Diameter of blades mm 140 - Rpm 12000 Trimming unit: Tool diameter mm 80 - Motors Kw 0,75 - Rpm 12000 Bevelling unit : Tool diameter mm 80 - Motors Kw 0,75 - Rpm 12000 Rounding unit with 4 mo ...
used
SCM edge banding machine model OLIMPIC K600 T-ERL composition: – STARTOUCH electronic control, with touch-screen video – useful panel thickness from 8 to 60 mm – roll edge thickness from 0.4 to 3 mm – solid edge thickness up to 8 mm – variable feed speed up to 16 m/min – upper presser with wheels – overall dimensions approx. 5.3 x 1.1 x h=1.6 m – machine according to CE standards, year 2013 Operating units: – RT-E grinding unit with 2 motors – VC/6 gluing unit with glue pot and upper pre-melter – K/SEL double tilting trims – RI/100 tilting trimmers – ROUND 2M rounding unit with 2 motors – RAS/K pvc/abs edge scraper unit – RCL glue scraper unit
used
EPS Crushing & Melting Machine For Sale Brand: Best Machine Industry Model No.: BF-HM Power: 2.57 kW (3.5 hp) Feed Mouth: 380x300 mm For more details or to make an enquiry, please contact us.
used
Description: serial number: 9773  , max.capacity: 900 kg heating power: ,22 kW operating voltage: 400 V chamber volume: 820 dm³ max. temperature: 1000º C max. pressure: 200 mbar furnace volume: 900 kg, melting bath temperature max.: 1,000 °C, net power: 400 V, weight approx.: 2,700 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 1,000 x 600 mm
used
Description: High-perfomance Edegbanding machine with PU-gluing and return conveying system. Worked only for approx. 1 year in single-shift workshop: infeed area with long infeed fence, 5-roller infeed unit and squared infeed table (500 x 500 mm) with controlled fence. Spraying unit for separating agent top/bottom. per-milling unit 2 x 4,5 kW ,incl. horizontal positioning controlled gluing unit with PUR-pre-melter BALTI Dual Pur. 2 times automatic glue-quantity dosing. 6-roll pressure zine, per-heating table pre-milling unit for premilling of edge projection on the top side snipping unit 2 x 600 W with automatic lateral scanning and pneumatic inclination 0 and 25° rough trimming unit 2 x 1,85 kW with HSK-25 retainer corner rounding unit KFA x30 - 0,5 kW mit HSK retainer multi profile scraping unit flat scraping unit buffing unit return conveying system Feddback 100 for ma ...
used
Foil wrapping machine (forming-feeding-packing) which can be used for packing products like yeast, butter, lard, margarine, tvorog or cottage cheese into paper-based aluminium foil or pergamyn. Sequence of the machine: foil feed from a reel of foil, imprint position (option, date coder excluded), foil cutting, wrap formation and insertion in the turnplate cavity, product feed by butter / solid yeast (not melted) or any other product, wrap folding, portion pressing and heatsealing, lifting out and ejecting the portions, transferring the portions on the exit conveyor belt, outfeed conveyor belt (outfeed conveyor itself excluded). The format on the machine is 42 gram, 41,5 x 31,5 x 31,5 mm, bottom folding. The product is feed from a double jacketed stainless steel hopper with pushing down screw inside (motor 2,2 kW - n2: 25 rpm). The machine is equiped with a photocell on the paper infeed, ...
used
Foil wrapping machine (forming-feeding-packing) which can be used for packing products like yeast, butter, lard, margarine, tvorog or cottage cheese into paper-based aluminium foil or pergamyn. Sequence of the machine: foil feed from a reel of foil, imprint position (option, date coder excluded), foil cutting, wrap formation and insertion in the turnplate cavity, product feed by butter / solid yeast (not melted) or any other product, wrap folding, portion pressing and heatsealing, lifting out and ejecting the portions, transferring the portions on the exit conveyor belt, outfeed conveyor belt. The format on the machine is 42 gram, 41,5 x 31,5 x 31,5 mm, bottom folding. The product is feed from a double jacketed stainless steel hopper with pushing down screw inside (motor 2,2 kW - n2: 25 rpm). The machine is equiped with a photocell on the paper infeed, to control the exact position of th ...
used
Foil wrapping machine (forming-feeding-packing) which can be used for packing products like yeast, butter, lard, margarine, tvorog or cottage cheese into paper-based aluminium foil or pergamyn. Sequence of the machine: foil feed from a reel of foil, imprint position (option, date coder excluded), foil cutting, wrap formation and insertion in the turnplate cavity, product feed by butter / solid yeast (not melted) or any other product, wrap folding, portion pressing and heatsealing, lifting out and ejecting the portions, transferring the portions on the exit conveyor belt, outfeed conveyor belt (outfeed conveyor itself excluded). The format on the machine is 42 gram, 41,5 x 31,5 x 31,5 mm, bottom folding. The product is feed from a double jacketed stainless steel hopper with pushing down screw inside (motor 2,2 kW - n2: 25 rpm). The machine is equiped with a photocell on the paper infeed, ...
used
Granulate supply Make: ADOLPH Type: G-Trans 25 for continuous granulate supply on edge banding machines technical details: System for a machine line with 4 pre-melters (standard) Pos.1.1 1 basic unit for bag-emptying G-Trans® 25 Portal for Big-Bags with hanging emptying: Solid steel frame in 40 mm square-tube profile, torsion-stiff welded construction, main pillars with base plate for dowel-anchorage. Solid steel welded construction in square-tube profile, with fork-lift lugs, 4 hooks and tapered guide pins for easy touchdown on the portal. Sufficient stability for 1.500 kg weight. Supporting area with bars and stacking corners. Material container in powder-coated steel, with cone for free-flowing bulk materials. Filler plug diam. 300 mm. Filler opening 350 x 350 mm with sliding cover. 5/8 plugs for granules transport NW 25 Stack frame ...
used
Single sided postforming edge processing machine Brand: WEHRMANN Type: Combima DPF New with 12 months warranty Example with typical equipment; almost each equipment is possible. Please discuss your requirements with us Technical data: Machine control: BECKHOFF route control with 15? Touch-Screen for pre-selection of units and for saving programs. The workpiece transport via precision roller chain R75 with height adjustable top pressure. Feed speed: max. V=6-30 m/min. frequency controlled drive, Top pressure: Motorical height adjustment via axis adjustment in program Right hand site equipped with 1 unit, width adjustment via NC axis: 1 Pre-milling unit With 1 motor with vertical shaft, 400 V, 12,5 KW, 100 Hz, 6000 rpm. Motor shaft Hydro D40 Swivable 90 - 180 degrees, move in/out for use Left han ...
used
single-sided direct postforming machine Brand: Wehrmann Type: Combima /K/I/R80/1260/V Year: 2018 Varied using for doors, worktops, furniture parts, curved caravan fronts, etc. Technical data: A single-sided throughfeed postforming machine for the postforming and postfolding process, for processing curved workpieces in caravan construction. For workpieces to be profiled made of wood/wood materials with laminate (CPL,HPL) as surface material. The laminate protruding for the postforming process is located in the machine on the underside of the workpiece and is formed from the bottom to the top. Technical data Machine Constant workpiece projection from the chain conveyor: from approx. 35 mm Throughput width min.: 130 mm ( only for straight parts ) Workpiece length in feed direction min.: 1,000 mm Basic height: 940 mm (upper edge of chain conveyor) The workp ...