melt pump used for sale

Cat. No. 13-0048 in a very good condition Testing water by 22°C back pressure at 1 bar Pressure: 3,2 bar capacity: 7.800 litres/h Motor: 7,5 kW Connection: inlet/outlet: DN 65 according to DIN 32676 - can be changed on request for an additional charge Measurements: length: 140 cm width: 44 cm height: 95 cm weight: 300 kg All prices are valid Ex-works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale

Type: FP722KF No.: 42441029 with perm for mechanical seal Engine: Flender ATB Loher in F n = 2840 RPM Power: 1.5 kW Dimensions: LWH = 500x200x230mm Weight: approx. 40 kg

Type: FPE722C No.: 0424470326 Engine: ATB in Exx Power: kW 3,3 Year of construction: 2004 n = 2830 RPM Dimensions: LWH = 600 x 300 x 330 mm Weight: approx. 60 kg Frontal connection DN 50, up DN 36 Milk tube

Warman ®, AH, ® pump 4/3, AH type: 4/3, AH storage: C standard number: WP35758 Hydrostatischer test pressure: 14 cash speed: 2751 the pump is as good as new. It was carried out only one test flow with the pump. from the cyclone supply up to regrinding, Flotation and departures is the Warman ®, AH, ® pump the best choice.

Used eccentric screw pump Bornemann E2H 1024 Built: 1993 Power: 4 kW Voltage: 400/690 V Flow rate: 10 m3/h Speed: 370 rpm Viscosity: 10000CST Conveyor pressure: 2 bar Suction flange: DN80, top Pressure flange: DN65, axial Manual: yes Machine number: 329495

; ready for operation

Cat.-No. 13-0291 in a very good condition Testing water by 22°C back pressure at 1 bar Pressure: 6,0 bar capacity: 6600 litres/h motor: 220 V, 380 A, 3,0 kW Connection: inlet/outlet: DN 80 according to DIN 32676 - can be changed on request for an additional charge surcharge: infinitely via frequency converter Measurements and weight: length: 1200 mm width: 400 mm height: 1050 mm weight: appr. 250 kg All prices are valid Ex-works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale

Make: Allweiler Type: SZBP 100.1 E 11 P01 No.: 7602467 Q = 5-25 l / min = 300-1500 l / h n = 40-140 min-1 Year of construction: 1995 Condition very good Spare parts: 1 stator speed-controlled drive North Type: SK255F AL-R1500-100 L / 4E Dimensions: LWH = 1400x300x650mm Weight: approx. 120 kg

Make: Netzsch Type: NES 30A No.: 40500562 / 01 Machinenr.: 255281 Year of construction: 1994 very good condition Gear: Stöber Type: C002N-0041-D90 L4 No.: 1088609 n = 330 min-1 Engine make: DIEZ Power: 1, 5kW Dimensions: LWH = 1300x250x270mm Weight: approx. 80 kg 2. Pump: identical, but with an off switch and adapter onto screw approx. 50 l Total height: 900 with funnel

Hilge pressure boost pump Mint from spare parts inventory for example, for CIP systems Motor NMG 160 MB242FF300D1 380-415 V 50 Hz 15 KW Q = 22, 5 m m³ / h H = 110 m n = 2900 / min

Manufacturer: BUSCH Type: RC 0025 E501 Capacity: 25 m3/h Vacuum pump BUSCH type RC 0025 E501 Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Type: LOWARA used water pump Machine number: 02192 Pump: C0350/09/A Q: 6-24 m m³/h H: 12.7-5.9 m P2: 0.9 kW Hmin: 5.9 m Engine: 3 SM71BG / 309-50 Hz

Type: LOWARA used water pump Machine number: 02193 Pump: C0350/09/A Q: 6-24 m m³/h H: 12.7-5.9 m P2: 0.9 kW Hmin: 5.9 m Engine: 3 SM71BG / 309-50 Hz

Type: diving motor unit Flygt submersible pump Pump: 3085891 Data: 259 mm / M15-09-2AL Y/A: 2,4 kW r/min: 2840 V: 4.7 / 8.1 kg: 55

Plant: Second-hand Grundfos pressure increase station Type: CR30-20 Model: 50000 PL9017 -: 2900 min Performance: 30 m, m³/h Height: 20.5 m Maximum pressure: 16 bar Temperature: Max 110 C.

Type: LKM 3027 Just: 2213857 ZwischengetriebeNr.: 318978 Disco built gearbox Lenze Type: 11711.06.16 No.: 6/7000/2365 N1 = 1500 min-1 N2 = 65-375 min-1 Engine: Loher power: 2,5 kW on mobile carts Condition good Dimensions: LWH = 1300 x 350 x 750 mm Weight: approx. 100 kg

Attachment: eccentric screw pump used Manufacturer: Netsch Type: NE 30 A Commissions No.: 305699 Machine number: 115945 Year of construction: 1980 Capacity: 2, 1 m³/h at 6 bar Speed: 355 1/min

Year of construction: 1992

Attachment: eccentric screw pump used Manufacturer: Allweiler Type: SNP 25.1 Version: H1P01 Machine number: 7655566/2 Year of construction: 1982 Capacity: 10L / min Speed: 230 RPM

Used eccentric screw pump SMI - Ruhr pumps Series: SMI Size: 150 Year of construction: 2003 Capacity: 150 m m³/h maximum

5.8 m3/h 0.25 kW

Becker vacuum pump / absolutely mint condition Run-time = 1 hour for test purposes Year 2013 Motor output 1,5-1,8 KW New price 2,400 euros

MATEC ZRP 320 Inox Pharma gear pump with sep. Fans for exact delivery quantities MATEC gear pumps are very precisely made of high-quality material. The pumps have been specially designed for the promotion of gel-like media of the pharmaceutical and food supplement industry in the viscosity area 2500-4000 MPas developed. The slanted gears guarantee a quiet, pulsation-free and precise transport. With the help of frequency converters, the flow rate can be adjusted exactly to the current demand and the motor can be controlled from normal 50 Hz frequency down to 1 Hz or up to over 80 Hz. The almost leak-free operation allows an exact dosing conveying without empty pump operation. This preserves the quality of the medium. Pump heatable with 2 el. Heating cartridges up to 100°C, temperature sensor, temperature control unit new Spare Parts/Service MATEC CH-4952 Eriswil/EN-79618  ...

Piston pump with drive 0.25 kW / 1.325 RPM, stroke length: 1 - 15 mm, stroke frequency: up to 110 rpm.

Piston pump with 0,25 kW / 1.325 UPM drive, stroke length: 1 - 15 mm, stroke frequemcy: up to 110/min.

System: pressure booster pump needed Manufacturer: Allweiler Type: LV 50/4 / diameter. 170 Model: U2. 6 d-W1 Year of construction: 1999 Flow rate: 40 m, m³/h H: 154 m n: 2900 1/min P: 26 kW

Technical data: -2.77 l/s, 14.7 m -Rated speed: 1440 1/min -Inlet: DN 50 -Print: DN 40 -Motor: 11 kW -2-pole New price: 16,500

System: Used piston - diaphragm pump Manufacturer: Abel Type: HMD-G-20-0125 Year of construction: 2001 Series: HM Machine number: 5100074 Material: GG Capacity: 18 m m³/h Delivery pressure: 15 bar Speed: 131 U/min Temp: MAX 100 ° C Operating voltage: 380 V Frequency range: 50 Hz Motor: 11 kW Protection class: IP55 Flanges: DN 80 Dimensions: 1.70m L x 1.30m W x 1.60m H Miscellaneous: forced ventilation 230/400V, 0.11 kW

Attachment: submersible pump Manufacturer: Flygt Prod.-No.: 3085.891 IP: 68 KW: 2.4 Rpm: 2840 Hz.: 50

System: dosing pump Manufacturer: Jesco Prod.-No.: 37142 Type: CC 10/40 Year: 05/2003 IP: 55 KW: 0.05 Rpm: 1440 Hz.: 50

Materials: Housing: 1.4581 Wheels: 1.4408 wave: 1.4571 Sealing: single-acting mechanical seal, carbon/silicon carbide/Viton Model A6: Pump on base plate mounted elastic coupled with 1.35 kW IEC standard motor, three-phase Pressure: 2 bar Revolutions: approx. 1,450 U/min Output: 1,200 l / h Mains frequency: 50 Hz Engine power: 230/400 V Protection class: IP 55 protection class: E ex eII T3 Design: B3 Pump partially unused in excellent condition!

New dosing pump from Prominent

Attachment: eccentric screw pump used Manufacturer: Allweiler Series: AED 1E 4250 Year of construction: 2000 Working temp.: approx. 20 ° C Viscosity at tA: approx. 500 mpa.s Density at tA: approx. 1.0 kg / m³ Pressure in the pressure connection: 2-6 bar Speed: 62-310 1/min Flow rate: 30-180 m, m³/h Engine capacity: 45.0 kW

Submersible pump, in steel vessel, Q= 10 m?/hr., H= 36-41 m, 1860-1980 rpm, 15,0-20,0 kW, with Seva electro motor, 30,0 kW

Dosing unit with 6 prominent pumps (used)

VNr. A57408/00 -Centrifugal pump 4 m3/h, 400 V, 5.5 kW

Mobile pumping station w / air driven pump and 2 "camlock couplings and flushing. Build in PE plastic.

New pump from Ebara: Ebara, pump 3SHS 50-160/5,5Kw The EBARA centrifugal pumps series 3SHS are high-quality stainless steel pumps with stub shaft and standard motor for commercial and industrial applications.

New Ebara pump for sale: Ebara, pump 3LS 80-160/15

Komplete pump on steel frame. Volute casing pump KBO Vogel LSNI 80-50-160

Vacuum pump (fluorine-resistant) Manufacturer: Pfeifer 219 l / min

2 pieces Rheinhütte - pumps

Submersible pump

Immersion pump, TG 50 20/40 840, 4KW, max19m, max70m³/h, Knoll, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used part! The part was purchased from a spare parts warehouse of a company, is in very good condition and fully functional. - 4,0 KW - Hmax 19m - Qmax 1160 L / min or 70m³/h, - 400 V - 50 Hz - 2900 rpm - Immersion pump, cooling lubricant pump - Immersion depth 108 cm - approx. 100kg Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device does not work within 1 month after purchase you can return the goods and we will refund the purchase price.

ready to ship

Recon and Used in Stock

Centrifugal pump Manufacturer: W. Schmidt K.G. Bretten. Type: Delta A 218/1 Usage area: wine pump Engine: Power: 1.5 HP Revolutions: 2840 RPM In very good condition!

Centrifugal pump Manufacturer: Hilge Type: Hygia SII / 60A Usage area: wine pump Engine: Power: 12,5 HP Voltage: 380 V Revolutions: 2.890 U/min In very good condition!

Eccentric screw pump Manufacturer: Seepex Series: BN Size: 17 Pressure level: 12 Operating pressure: 10 bar Operating temperature: - 10 / + 30 Flow rate: 10 m ³/h Revolutions: 260 U/min Year of constr.: 1990 in very good condition!