melt furnace used for sale

A microprocessor-controlled dental ceramic firing furnace is available. Firing temperature: 1200°C, firing chamber diameter: 85mm, firing chamber height: 67mm, machine dimensions X/Y/Z: approx. 280mm/430mm/410mm, weight: approx. 25kg. Documentation available. An on-site inspection is possible.

The system consists of two bell furnaces, maximum temperature: 1100°C, annealing chamber: 2x 1000mm, electrical connection: delta, current rating: 433A, connected load: 300kW, equipment: power control, temperature control, process monitoring, safety controller, emergency stop system, motorized drive for bell movement, air conditioning unit, electrical control cabinet, and control system. Inspection on site is possible.

A complete electrically heated Hindenlang bale-out furnace system for melting and holding aluminium is offered. Design: stationary, heating shell material: vermiculite, Heating capacity: 45kW, melting capacity: approx. 90kg/h, operating temperature: 720°C, max. temperature: 850°C, furnace chamber temperature limit: 950°C, crucible holder: BU-200/BN-200, crucible support height: 65mm, weight: approx. 1100kg without crucible. Equipment: furnace housing with insulation and meander heating elements, lateral emergency drain, temperature monitoring, switchgear rated up to 80A/55kW, crucible breakage detection system, freeze protection, timer, connecting cables, BU-200 crucible and crucible support. Documentation available. An on-site inspection is possible.

0: 1200 °C internal diameter: 210 mm internal length of the oven: 1000 mm total power requirement: 25,2 kW weight of the machine ca.: 0,55 t dimensions of the machine ca.: BTH 1,3 x 1,6 x 1,8 m Hochtemperatur ROHROFFEN - Labor Split - Tube Furnace Kelltool Furnace GAS H2 und N2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An electric Nabertherm shuttle kiln for firing ceramics, stoneware and soft-paste porcelain is offered. Connected load: 69kW, maximum temperature: 1340°C, volume: approx. 1000l, internal dimensions X/Y/Z: 800mm/1600mm/800mm, control system: Nabertherm C19 program controller. Equipped with automatic exhaust-air flap control, motorized ceiling flap and removable lifting eyes. Overall dimensions X/Y/Z: approx. 1300mm/2200mm/1840mm, weight: approx. 3000kg. Documentation available. An on-site inspection is possible.

temperature max.: . ° internal length of the oven: . mm internal width of the oven: . mm internal height of the oven: . mm total power requirement: kW weight of the machine ca.: t Annealing furnace with extraction system Make: Helmut Peiler 2 pieces available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

temperature max.: . ° internal length of the oven: . mm internal width of the oven: . mm internal height of the oven: . mm total power requirement: kW weight of the machine ca.: t Annealing furnace with extraction system Make: Helmut Peiler 2 pieces available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

degree: 250 °c width: . mm height: mm depth: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m No.8505548 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Usable furnace width: 600mm, usable furnace height: 310mm, clear passage height: 350mm, furnace zone length: 3500mm, number of heating zones: 3, radiant tube control: On/Off, radiant tube monitoring: via UV cell, max. temperature: 1050°C, operating temperature: approx. 800-1000°C, material processed: transformer and slit-strip cores, net/gross throughput: 750/860kg/h, max. grate load: 250kg, permissible grate weight: 50kg, cycle time per grate: approx. 20min, heating, equalizing, holding: approx. 850°C, approx. 120min, cooling: from approx. 850°C to below approx. 200°C in approx. 180min, number of grates: inlet lock: 1, annealing furnace: 6, furnace neck: 1, cooling section: 9, outlet lock: 0, grate return transport (buffer): 18, grate width: 600mm, grate length: 600mm, grate height: 60mm, overall grate height: 210mm, frame height: 150mm, weight per grate: approx. 50kg, annealing fu ...

A Bosch OBD 10/53L 12 and a Bosch OBD 15/54L 17 are available, strip width: 250mm, usable height: 260mm, number of furnace doors: 3, doors: inlet, intermediate and outlet door, strip speed: 1.8m/min, cycle time: 25min, cycle distance: 700mm, operating temperature of decarburizing zone: 760°C, operating temperature of bluing zone: 550°C, heating capacity of decarburizing zone: 84kW, heating capacity of bluing zone: 18kW, evaporator heating capacity: 3kW, evaporator water consumption: approx. 0.5l distilled water/h, energy consumption: approx. 45kWh/100kg net weight, total decarburizing time: 150min, cycle time: 25min, cycles in the decarburizing zone: 6, decarburizing zone temperature: 760°C, holding time: 30min, propane/air ratio for protective gas generation: 1:18, protective gas quantity: approx. 35Nm³/h, propane quantity: 2Nm³/h, air quantity: 36Nm³/h, combustion tower temperatu ...

degree: 500 working heigth: - mm length: 600 mm width: 600 mm depth: 600 mm total power requirement: 21 A / 14,5 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1 x 1 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

total power requirement: 38 kW degree: 500 Grad weight of the machine ca.: 2,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

temperature max.: 1150 ° muffle size (length): Ø 150 muffle size (width): Ø 150 muffle size (depth): 300 mm total power requirement: 3 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 0,8 x 0,5 x 0,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MARENO EVO10X ist ein Härteofen/Trockenofen für Präzision, hohe Genauigkeit und Zuverlässigkeit. Nutzraum: B350 x H600 x T600 mm. Technische Daten: Max. Temperatur 270 °C; installierte Leistung 16 kW; Anschluss 50 Hz 3x 400 V; Außenmaße L1000 x B800 x H1800 mm. Ermöglicht kontrollierte Wärmezyklen zur Erzielung enger Toleranzen; Einsatzbereiche: Automotive, Luftfahrt, Medizintechnik, Uhrenindustrie, Werkzeugmaschinenbau. Technische Daten ohne Gewähr

DE NABERTHERM N 4000/60HAS ist ein Umluftofen für Wärmebehandlungen mit hoher Präzision, Genauigkeit und Zuverlässigkeit. Nutzraum 1300×1000×2000 mm (4000 l), Ladegewicht max. 3000 kg. 400–600 °C (max. 600 °C); Ventilator 9000 m3/h; Heizleistung 60 kW; install. Leistung 70 kW; Anschluss 3×400 V 50 Hz; Außenmaße 3700×2700×3100 mm. Zubehör: Wasserabschreckbad 2500 l, Zustandsleuchte. Eignet sich für enge Toleranzen; Branchen: Automotive, Luftfahrt, Medizintechnik, Werkzeugbau, Uhrenindustrie. Technische Daten ohne Gewähr

SAFED NIT 17 ist ein Härteofen hoher Präzision, ausgelegt für hohe Genauigkeit und Zuverlässigkeit bei Wärmebehandlungen. Maximale Temperatur 1000 °C. Heizleistung 7 kW; Gesamtinstallierte Leistung 28 kW; Anschluss 50 Hz, 3x 380 V. Maschinengewicht ca. 600 kg; Abmessungen L×B×H 5800×1200×1800 mm. Ermöglicht enge Toleranzen; typische Einsatzbereiche: Automobil, Luft- und Raumfahrt, Medizintechnik, Werkzeugbau, Uhrenindustrie. Technische Daten ohne Gewähr

SOLO 221-15/25 ist ein Anlassofen, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitskapazität: Volumen 4,5 l; maximale Temperatur 650 °C, geeignet für Wärmebehandlungen kleiner bis mittlerer Werkstücke. Technische Daten: installierte Leistung 4 kW; Anschluss 50 Hz, 3x 400 Volt. Ermöglicht enge thermische Toleranzen und ist geeignet für Automotive, Uhrenindustrie, Werkzeugmaschinen, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

SAFED 6SGR50/70 ist ein Härteofen, ausgelegt für präzise, hochgenaue und zuverlässige Härteprozesse. Maximale Temperatur: 650 °C. Anschluss: 50 Hz, 3x 400 Volt; Anschlussleistung: 3.5 kW. Entwickelt für konstante und reproduzierbare Wärmebehandlungen; geeignet für Automotive, Luftfahrt, Werkzeugbau, Medizintechnik und Uhrmacherei. Technische Daten ohne Gewähr

Two dental furnaces are offered, one Zirkonzahn sintering furnace and one Nabertherm preheating furnace. 1) Zirkonzahn Keramikofen 1500 sintering furnace, Year of manufacture: 2006, with control unit, firing chamber volume: approx. 0.6l, maximum temperature: 1500°C, power: 1500W, furnace weight: approx. 75kg, furnace dimensions X/Y/Z: approx. 390mm/690mm/490mm. 2) Nabertherm preheating furnace in need of repair with P 320 controller, program memory: 9 programs, program steps: 16, chamber volume: 9l, maximum temperature: 1100°C, when the Nabertherm furnace is switched on, an ERROR message with an error code appears, the exact cause of the fault is unknown. An on-site inspection is possible.

Key data: 300 °C, 1000 mm, 800 mm

Technical data Manufacturer: Steel Type: 8220 Type: Industrial Furnace / Chamber Furnace Condition: Used Other technical data according to the nameplate Facilities Robust and durable construction Electric heating Temperature control for precise processes Good heat distribution in the working area Suitable for professional use Areas of application Heat treatment of metal parts Annealing and tempering Drying processes Preheating of workpieces Laboratory and testing applications Research and development Interior chamber dimensions: B1000 H1000 T800

x-travel: 800 mm y-travel: 900 mm z-travel: 620 mm b-axis: +/- 120 ° c-axis: 360 ° 0 Control: HEIDENHAIN iTNC 640 spindle taper: HSK 63 spindle turning speed - stepless: 15000 U/min tools in tool magazin: 64 total power requirement: 10/17 kW weight of the machine ca.: 21.5 t dimensions of the machine ca.: 3 x 4.5 x 3.6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 300 °C

Manufacturer: Reinhardt Model: Titan 6700 Year: 2023 Condition: Used Stock number: 9482 Maximum temperature: 50-300 C Working Area: 6.7 m³

NABERTHERM N 41 Hardening Furnace Manufacturer NABERTHERM Model N 41 Year 1990 Condition untested Location 72589 Westerheim DE Lot 74

SOLO 8004 ist ein Härteofen mit hoher Präzision, hoher Genauigkeit und Zuverlässigkeit. Arbeitskapazität: Durchmesser bis 130 mm. Haupttechnische Daten: maximale Temperatur 1150 °C, Heizleistung 3,5 kW, Anschluss 50 Hz 3x 380 V; Außenmaße L800 × B600 × H600 mm. Erreicht enge Toleranzen; geeignet für Automotive, Luftfahrt, Uhrenbau, Werkzeugmaschinen und Medizintechnik. Technische Daten ohne Gewähr

Offer 26187 Technical data: - Nominal temperature / continuous temperature infinitely variable up to 900 ° - Temperature control via NABERTHERM Controller C 40 - Heating from both sides, back wall, door and floor - Motorized lifting door - T. max.ca. 120 min - Drive 400 V / 59 kW - Interior dimensions approx. W 1000 x H 550 x D 1900 mm - Usable volume approx. 950 L - Space requirement approx. W 2100 x H 2800 x D 2800 mm - Weight approx. 2900 kg

temperature max.: 450 ° internal length of the oven: 1500 mm internal width of the oven: 1500 mm internal height of the oven: 2000 mm total power requirement: 65 kW weight of the machine ca.: 12.800 kg dimensions of the machine ca.: 2,4 x 2,4 x 2,72 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

VECSTAR MF4 High Temperature Oven Manufacturer: VECSTAR Model: MF4 Type: High Temperature Chamber Electric Furnace / Laboratory Furnace Maximum temperature: 1,400 °C Maximum continuous temperature: 1,350 °C Chamber volume: 16 liters Chamber dimensions: 200 x 200 x 400 mm Maximum power: 10 kW Power supply: 240 V single-phase Frequency: 50/60 Hz Temperature sensor: Thermocouple type R Throttle: Solid State Relay Thermal protection Silicon carbide heating elements High-performance thermal insulation Indicative external dimensions: 820 x 700 x 730 mm Indicative weight: 120 kg Applications: heat treatments, calcination, baking, annealing and material testing Auction-ID: A1-51172-105

Used TEL Alpha-8SE-E Semiconductor Vertical Gas Diffusion Furnace Used for wafer technology Manufactured: 11.2500 Sr. No. M000000Y5670 Pumps/Motor: 2 x Toshiba 3 phase induction motor. 480 Volts, 60 Hz. Device must be transported in an upright position (pay attention to construction height) Auction-ID: A1-50936-269

Nominal temperature: 300 °C (572 °F) max Volume: 53 litres (internal dimensions: approx. W 400 × H 400 × D 340 mm) Nominal power / voltage: 1.20 kW | 230 V (1~, 50/60 Hz, approx. 5.3 A) Degree of protection: IP 20 Temperature protection: DIN 12880 (class 2.0) Auction-ID: A1-51285-262

Power 1200 W, dimensions oven interior 160x160x120 mm, nominal temperature 1050 °C, without roller board Auction-ID: A7-51473-51

Sintering furnace used in dental prosthesis laboratories Good working condition and cosmetics Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force. Lots may be added to the list later. An exhibition beforehand is set up, please inspect. The equipment is made available on pallet or pallet box or cardboard with all the appropriate protections, the price of the packing is integrated into the sale price. For shipping, you can have your transport pass or go through the carrier JMA express, or ask us for a shipping quote by Fedex. See General Terms and Conditions of Sale Auction-ID: A1- ...

Year of construction approx. 1960, maximum temperature 1175 °C, without roller board Auction-ID: A7-51473-109

Key data: 850 °C

Manufacturer: ZEZ Model No.: RDOM 1.5.20.10/8.5 Year: 2006 Condition: Used Stock number: 9649 Maximum temperature: 850 C Weight: 23110 kg

HERAEUS – KR 260 – Hardening Furnace Electric hardening furnace from the manufacturer HERAEUS HANAU, type KR 260, for heat treatment and heating of samples and materials in the laboratory area. Technical data according to the nameplate: Type: KR 260 Nominal temperature: 1,150 °C Nominal voltage: 380 V Mains frequency: 50 Hz Nominal current: 20 A Used condition, untested. Scope and condition according to illustrations. Auction-ID: A1-51933-39

MIHM-VOGT - TABEO-2-M-ZIRKON-120 REF. 7201000004 - (2023) Good working condition and cosmetics Compact and cost-effective high-temperature sintering furnace specifically designed for the precise firing of zirconia oxide (ZrO₂) in dental laboratories Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force. Lots may be added to the list later. An exhibition beforehand is set up, please inspect. The equipment is made available on pallet or pallet box or cardboard with all the appropriate protections, the price of the packing is integrated into the sale price. For shipping, you can ha ...