136,826 used machines on RESALE, but how to find them? Machine Search
Please try with a different search term.
Lift system, Megamat, 170kg / shelf, approx. 6m high, – used - : Ex-site price: 14.500.- € (net), plus dismantling etc. Manufacturer: Megamat Type: Megalift 14448/25/6010 Year of Make: 2000 Max. load capacity per shelf: 170kg Max. total load capacity 18,000kg Dimensions per shelf: approx. 2.45m x approx. 0.80m Number of shelves: approx. 40 pieces Device dimensions: Height: approx. 6.01cm Width: 2.76m Depth: approx. 2.70m 3/N/PE 230/400V 10A, Fuse 16A Condition: good Available: immediately Location: BG-8800 Sliven
We offer LTG-TowerMax L 70.0-304-2448-816-7510 storage systems modernized by us with a completely new StoreControl L control system. currently 2 identical machines are available Exterior Dimensions: Height 7510 mm Overall width 2700 mm Overall depth 2820 mm Total payload machine up to 2 x 35,000 kg 55 carriers for up to 304 kg payload each in clear usable dimensions: W = 2448 mm T = 816 mm Usable height up to 60 to 750 mm Start of the operating opening at 950 mm above OKFF, then 915 mm high Engine power Vertical drive 5.2 kW / 400 Volt Horizontal drive 0.75 kW / 400 Volt Rocker motor 0.4 kW / 400 V Colour scheme grey/blue, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries
We offer an LTG-TowerMax L 70.0-150-2448-1071-5885 storage lift modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Height 5885 mm Overall width 2840 mm Installation depth 3500 mm Total payload machine up to 2 x 35,000 kg 60 carriers for up to 150 kg payload each in clear usable dimensions: W = 2448 mm T = 1071 mm Usable height up to 50 to 750 mm Start of the operating opening in 840 mm above OKFF, then 990 mm high Engine power Vertical drive 5.2 kW / 400 Volt Horizontal drive 0.75 kW / 400 Volt Rocker motor 0.4 kW / 400 V Colour scheme grey/grey, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries
We offer a LTG-TowerMax L 18.0-170-2448-816-7510 storage lift with a completely new StoreControl L control system, which we have modernized. Exterior Dimensions: Height 7510 mm Overall width 2760 mm Overall depth 2650 mm Total payload machine up to 2 x 9,000 kg 40 carriers for up to 170 kg payload each in clear usable dimensions: W = 2448 mm T = 816 mm Usable height up to 60 to 750 mm Start of the operating opening in 900 mm above OKFF, then 800 mm high, lift door manually operated, Engine power Vertical drive 3.0 kW / 400 Volt Horizontal drive 0.37 kW / 400 Volt Colour scheme grey/grey, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries
We offer an LTG-TowerMax L 18.0-250-1220-816-6010 storage lift with a completely new StoreControl L control system. Exterior Dimensions: Height 7510 mm Overall width 2760 mm Overall depth 2650 mm Total payload machine up to 2 x 9,000 kg 40 carriers for up to 170 kg payload each in clear usable dimensions: W = 2448 mm T = 816 mm Usable height up to 60 to 750 mm Start of the operating opening in 900 mm above OKFF, then 800 mm high, lift door manually operated, Engine power Vertical drive 3.0 kW / 400 Volt Horizontal drive 0.37 kW / 400 Volt Colour scheme grey/grey, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries
We offer LTG-TowerMax L 40.0-340-2448-816-8760 storage systems modernized by us with a completely new StoreControl L control system. currently 2 identical machines available Exterior Dimensions: Overall height 8760 mm Overall width 2778 mm Installation depth 2800 mm Total payload machine up to 2 x 20,000 kg 48 carriers for up to 340 kg payload each in clear usable dimensions: W = 2448 mm T = 816 mm Usable height up to 60 to 750 mm Start of the operating opening in 900 mm above OKFF, then 800 mm high, lift door manually operated, Engine power Vertical drive 3.0 kW / 400 Volt Horizontal drive 0.37 kW / 400 Volt Colour scheme grey/orange, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries
Screw diameter: 120 mm Injectable volume / Shot volume: 5598 cm3 Injection pressure : 1137 bar Column passage / Bettween tie bar: 1060 x 1060 mm Mould thickness mini-maxi / Mould tickness mini-max: 350 - 1100 mm Opening stroke: 1150 mm Euromap 12 4 Hydraulic Cores / 4 Corepulling
Screw diameter: 93 mm Injectable volume / Shot volume: 3138 cm3 Injection pressure : 1912 bar Column passage / Bettween tie bar: 950 x 850 mm Mold Thickness /Tickness tie bar: 300-1000 mm Opening stroke: 930 mm Ejection stroke: 350 mm 2 cores / 2 corepulling 2 blow guns / 2 air valves Robot interface
MEGAPLOT XTR PRO 1200 CNC foam cutting machine was built in 2020 in Poland by Megaplot J.Wójcicki M.Jagła SJ. The machine enables precise cutting of any shape in a wide range of rigid foams, soft foams and rockwool. Cutting is performed fully automatically by means of an endless wire, which accelerates to a speed of 280 km/h. Project files, including shapes and their layout, can be prepared in any graphics program (CorelDraw, AutoCAD etc.). This is because the advanced FastWire software supports all major file formats. The MEGAPLOT XTR PRO upholstery foam cutting machine is also equipped with a controller which enables simulation of the cutting process and setting of the machining parameters with their change during the cutting. All this makes the offered machine an excellent choice for businesses producing, among others, insulation elements, packaging and upholstered furniture. Tec ...
Lift system, Megamat FSE 7.1, approx. 6.91m high, min. 331kg / Shelf, Shelf: approx. 3.06m x 81cm – used - : Price ex location: 18.500.-€ (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Megamat Type: FSE 7.1 3060/816-6910 Device number: 500002536 Year of Make: 2008 Permissible total load capacity: 70,000kg Load capacity per tray: at least 331kg (possibly also 414kg or 536kg, depending on which type of tray is installed, unfortunately cannot be clarified in advance). Number of shelves: approx. 50 pieces Shelf size: 3060 x 816mm Device dimensions: Width: approx. must be submitted later (width should be approx. 3,450mm) Depth: approx. must be submitted later (depth should be approx. 3,200mm) Height: approx. 6.91m 3/N/PE 230/400V, nominal operating current 17.8A, fuse supply line: 25A Condition: good Available: from approx. End o ...
Ref. 443 Light table Mega steel Type 399-3 Fabr. - Order No.: 93-674 Year of construction 1993 Table size: 70 x 100 cm Table top diagonally adjustable Height infinitely adjustable motorized from 85 to 115 cm Light source: 2 fluorescent tubes
We sell 35 x Megware MiriQuid compute node In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and components in refurbished conditions from all these manu ...
General SKU284Y446 MakeMega Sp. J. TypeFrozen Lump Breaker No.12/343 Year of construction2012 Main Features Motor1.1 KW Width920 mm Specified Features - Lump breaker Breakercheck Roll breakercheck Teeth height20 mm Roll sizesø 230 x 467 mm With hopper± 1200 l. Inlet1220 x 920 mm Outlet560 x 830 Motor1,1 kW 230-400 V 1430 rpm With variable speed drivecheck MaterialStainless steel 1.4305 (303) General LocationBarneveld Floorspace1,52 x 0,94 m Total height2,8 m Weight430 kgPowdered foodsGeneric medicinesRubberLump breakersAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesPaper & otherDetergent & surf.CosmeticsOrganicsAnimal feedOther feedMinerals & inorganicConsumer wasteMega Sp. J.Industries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > RubberBreakers > Lump breakersIndustries > Chemical > Agroc ...
Description Proven stable steel construction with format-appropriate drawers highly resilient ball bearing guides each 9 drawers approx. 8 cm height with useful dimensions approx. 1200 x 1650 mm
sheet width: 1000 mm plate thickness: 3,3 mm distance between columns: 1050 mm diameter of upper rolls: 90 mm total power requirement: 1,1 KW weight of the machine ca.: 0,445 t dimensions of the machine ca.: 1,5 x 0,9 x 1,25 mm Sheet metal bending machine with special dimensions: - Capacity 700 x 4 mm - Conical bending - Swing-out top roller - Emergency release safety device - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We offer a paternoster LTG-TowerMax P 13.5-450-30-410-7935 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 7,935 mm Overall width 3,501 mm Installation depth 1,820 mm 30 carriers with a payload of 450 kg each in clear usable dimensions: H = 410 mm W = 2,850 mm T = 628 mm Chain jump 457 mm 60 galvanized intermediate floors for 150 kg each Total payload up to 13,500 kg Side table in 1000 mm above OKFF with NiRo worktop, 400 mm deep Colour scheme grey Motor power drive 1 x 5.5 kW / 400 Volt subject to errors and technical changes, surfaces cleaned, signs of wear and minor deformations possible, Delivery & assembly currently mainly in D, A and other neighboring countries
We offer a paternoster LTG-TowerMax P 13.5-450-30-410-7935 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 7,935 mm Overall width 3,501 mm Installation depth 1,820 mm 30 carriers with a payload of 450 kg each in clear usable dimensions: H = 410 mm W = 2,850 mm T = 628 mm Chain jump 457 mm 60 galvanized intermediate floors for 150 kg each Total payload up to 13,500 kg Side table in 1000 mm above OKFF with NiRo worktop, 400 mm deep Colour scheme grey Motor power drive 1 x 5.5 kW / 400 Volt subject to errors and technical changes, surfaces cleaned, signs of wear and minor deformations possible, Delivery & assembly currently mainly in D, A and other neighboring countries
plate thickness: 1,25 mm throat: 130 mm roll diameter: mm total power requirement: 0,75 kW weight of the machine ca.: 180 kg dimensions of the machine ca.: 1,1 x 0,6 x 1,2 m Flanging machine is equipped with: - Emergency switch - Footswitch - 8 pcs. Roll sets The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 35 mm : 35 mm bar material dia. max.: 70 x 2 mm rectangle: 60 x 60 x 3 mm flat steel: 60 x 10 mm Axis diameter: 50 mm work speed: 4,3 m/min total power requirement: 1,5 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,9 x 0,95 x 1,4 m Profile bending machine with: - Foot pedal right/left rotation - Hardened special steel shafts - 1 set of standard rollers - 2 rollers are driven The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We offer a paternoster LTG-TowerMax P 12.6-300-42-215-6080 with a completely new StoreControl P control system. currently 2 identical machines available, Exterior Dimensions: Height 6,080 mm Overall width 3,350 mm Installation depth 1,500 mm 42 carriers with a payload of 300 kg each in clear usable dimensions: H = 215 mm W = 2,650 mm T = 520 mm Chain jump 254 mm Total payload up to 12,600 kg 1000 mm side table above OKFF with NiRo worktop, 300 mm deep Colour scheme beige/beige Motor power drive 1 x 5.4 kW / 400 Volt subject to errors and technical changes, photo of an identical machine, surfaces cleaned, signs of wear and minor deformations possible, Delivery & assembly currently mainly in D, A and other neighboring countries
pressure: 35 t chamfer lenght: 2000 mm weight of the machine ca.: 3 t total power requirement: kW distance between columns: mm dimensions of the machine ca.: m pressure 35to max. bending length 2000mm arrester behind drive capacity 4,5 kW weight 3000kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We offer a paternoster LTG-TowerMax P 15.7-628-25-360-6010 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 6,010 mm Overall width 3,501 mm Installation depth 1,820 mm 25 carriers with a payload of 300 kg each in clear usable dimensions: H = 360 mm W = 2,850 mm T = 628 mm Chain jump 406 mm 25 galvanized intermediate floors for 140 kg each Total payload up to 15,700 kg Side table in 1000 mm above OKFF with plastic worktop, 300 mm deep Colour scheme grey/grey Motor power drive 1 x 5.5 kW / 400 Volt subject to errors and technical changes, surfaces cleaned, signs of wear and minor deformations possible, Delivery & assembly currently mainly in D, A and other neighboring countries
sheet width: 1000 mm plate thickness: 3,3 mm distance between columns: 1050 mm diameter of upper rolls: 90 mm total power requirement: 1,1 KW weight of the machine ca.: 0,39 t dimensions of the machine ca.: 1,4 x 0,9 x 1,2 mm Sheet metal bending machine with special dimensions: - Capacity 700 x 4 mm - Conical bending - Swing-out top roller - Emergency release safety device - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1000 mm plate thickness: 3,0 mm distance between columns: 1050 mm diameter of upper rolls: 90 mm total power requirement: 1,1 KW weight of the machine ca.: 0,47 t dimensions of the machine ca.: 1,7 x 0,8 x 1,35 mm Sheet metal bending machine with custom dimensions: - Capacity 1050 x 3.0 mm - Digital display - Hardened rollers - Conical bending - Swiveling top roller - Brake motor - Safety device: Emergency stop cord - Documentation in English - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
B&A REF: 8838 TON: 820 SCREW DIAMETER: 93MM SHOT WEIGHT: 2555 STROKE VOLUME: 2777CM3 INJECTION PRESSURE: 1478AR PLATEN SIZES: 1730 X 1560MM DBTB: 1250 X 1060MM MIN MOULD HEIGHT: 350MM MAX MOULD HEIGHT: 1100MM MOULD OPENING STROKE: 1150MM MAX DAYLIGHT: 2250MM EJECTOR STROKE: 350MM CONTROLS: SEF 2000 CORE PULLING: 3 AIR VALVES: 2 MOTOR: 93 HEATING CAPACITY: 41KW ROBOT INTERFACE: EUROMAP SCREW DRIVE: HYDRAULIC
Complete D90 Whey Demineralization Line, GEA Nanofiltration + MEGA Electrodialysis Reversal (EDR), Installed • Complete • Available Immediately, A complete industrial whey concentration and demineralization line available, for immediate purchase., The line was commissioned in 2013. It operated for approximately three, years and remains installed and connected on site in Lithuania., Designed for the production of high-value dairy ingredients, including D90, demineralized whey concentrate for infant nutrition and specialty dairy, applications., Scope of Supply, GEA Nanofiltration System (NF), Industrial nanofiltration plant for concentration and partial demineralization, of sweet whey., Main Parameters, • Feed capacity: approximately 17,000 l/h sweet whey, • Extended capacity: up to approximately 24,000 l/h, • Concentration from 5.8% total solids to 20% total solids, • Approx. ...
2 Michelin MegaXBib 1050/50 R32 tyres – good condition Brand: Michelin Model: MegaXBib Size: 1050/50 R32 Load/Speed Index: 178A8 Type: Agricultural Tires / Flotation Condition: good overall condition Healthy carcass Crampons in good condition Normal wear and tear from use Sold without rims Auction-ID: A3-46111-33563
Hydro-unit control cabinet with contents: - Megacontrol display - 2x Danfoss VLT micro drive - 2x Siemens Sirius Auction-ID: A1-50846-200
Electric cart, light truck Mega Electric. With tipping bucket. Dimensions of the body : 1.25 m by 2.40 m. Like new ! Elevation of side bears are included. Registered with motorcycle number plate, so should not be to the automotive inspection. Maximum speed : 40 km / hour. payload weight : 600 kg 10 KW Date of 1st registration : 2018. Insurance only € 125 per year. Auction-ID: A3-46140-11359
Vehicle: Renault Mégane II Coupé-Cabriolet (CC) Registration date: 31.03.2006 Engine: 1.6 L gasoline Displacement: 1,598 cm³ Power: 82 kW / approx. 112 hp Transmission: 6-speed manual transmission Color: Grey/Silver Body: 2-door coupe-cabriolet Folding glass roof / panoramic roof Air conditioning Electric windows Fabric upholstery black/grey Leather sports steering wheel Interior soiled due to age and use Body with signs of wear and tear Steel rims mounted Radio/car radio removed or not available Engine not operational / partially disassembled Cylinder head disassembled, engine block with exposed cylinders visible Various dismantled engine and vehicle parts are located in the trunk Engine compartment in need of repair accordingly Hood in the pictures not completely closed Condition: in need of repair / hobbyist vehicle or parts carrier Driv ...
RICHARD WOLF - MEGA PULSE TOWER 30+ REF. 2286006 - (device does not turn on) Surgical Laser Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force. Lots may be added to the list later. An exhibition beforehand is set up, please inspect. The equipment is made available on pallet or pallet box or cardboard with all the appropriate protections, the price of the packing is integrated into the sale price. For shipping, you can have your transport pass or go through the carrier JMA express, or ask us for a shipping quote by Fedex. See General Terms and Conditions of Sale Auction-ID: A1-5 ...
Remanufactured engine Rear camera Wabasto heating on diesel Auction-ID: A3-46140-9391
Electric windows + mirrors, automatic lighting, cruise control, climate control with zone control, multimedia system with Bluetooth and TomTom navigation, start stop system, parking sensors front + rear, skylight, tow bar with 7-pin plug Auction-ID: A1-47424-1765
serial number: 129390; description: Functional; Reversible plough; Mechanically adjusted; hydraulic reverse; used for medium and hard terrain; 190 - 260 HP; frame height of 800 mm. Auction-ID: A3-46114-16209
serial number: 129395; description: Functional; Reversible plough; Mechanically adjusted; hydraulic reverse; used for medium and hard terrain; 190 - 260 HP; frame height of 800 mm. Auction-ID: A3-46114-16210
used
Siemens X-ray tubes Type Megalix Cat 125 / 35 / 80 - 121 GW Siemens article number 05764606 Type Megalix Cat 125 / 15 / 40 / 80 - 121 GW Siemens article number 05764522
This ERCOLINA Megabender TOP 030 die bending machine was manufactured in 2011. It features a maximum pipe diameter of 2 (60.3 mm) and a pipe slide length of 3,000 mm. With 30 programs and the capability to work with various materials, consider the opportunity to buy this ERCOLINA Megabender TOP 030 die bending machine. Contact us for further details.
X-ray tube for multi star Type: MEGALIX 125/40/82CM-120W
maximum number of results exceeded
please refine your search
100 € 
