136,938 used machines on RESALE, but how to find them? Machine Search
length: 1050 mm height: 1450 mm weight of the machine ca.: 175 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 800 mm height: 650 mm total power requirement: 3,7 kW weight of the machine ca.: 75 kg dimensions of the machine ca.: 800 x 330 x 650 mm Technical Specifications Continuously adjustable range [A] 35â270 Duty cycle (DC) at Imax. (10 min) [%] 30 (40) Welding current at 100% duty cycle [A] 160 Mains connection [V] 3/PE 400 Continuous power at 100% duty cycle [kVA] 5.5 Protection class IP 21 Included accessories: - Hose set - Pressure regulator - Ground cable - Basket coil adapter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 900 mm weight of the machine ca.: 95 kg dimensions of the machine ca.: 900 x 450 x 850 mm Technical Specifications Continuously adjustable range [A] 35â250 Duty cycle (DC) at Imax. (10 min) [%] 40 Welding current at 100% duty cycle [A] 170 Mains connection [V] 3/PE 400 Continuous power at 100% duty cycle [kVA] 5.5 Protection class IP 21 Included: - Hose set - Pressure regulator - Ground cable - Spool adapter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Batch of miscellaneous equipment, consisting of 30 plastic crates with contents Overall dimensions: 1200 x 800 x 500 mm Weight: 30 kg Auction-ID: A7-50066-405
Metal tool box complete with all equipment as in the photo Overall dimensions: 450 x 400 x 200 mm Weight: 10 kg Auction-ID: A7-50066-364
Batch of miscellaneous equipment, consisting of 30 plastic crates with contents Overall dimensions: 1200 x 800 x 500 mm Weight: 30 kg Auction-ID: A7-50066-410
Metal tool box complete with all equipment as in the photo Overall dimensions: 450 x 400 x 200 mm Weight: 10 kg Auction-ID: A7-50066-369
Metal tool box complete with all equipment as in the photo Overall dimensions: 450 x 400 x 200 mm Weight: 10 kg Auction-ID: A7-50066-363
rockwell hardness: . brinell hardness: . weight: kg dimensions: mm Hardness tester Rockwell measurement with underframe table all technical data without guarantee The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
MERKLE M 284 K Welding machine Manufacturer MERKLE Model M 284 K Condition untested Location 35614 Aßlar DE Lot 64
Consisting of two pieces, measuring range: from 75 to 100 mm.
Incl. welding fittings and welding material.
• Incl. hose package • for all further welding data see photographed type plate!
Measuring range: 40 to 50 mm, incl. extension and setting ring.
EWM MIRA 301 MIG KGE Welding machine Manufacturer EWM Model MIRA 301 MIG KGE Condition untested Location 35614 Aßlar DE Lot 53
Consisting of 7 parts, with two micrometers, measuring range: from 20 to 40 mm, incl. setting rings
Attention: for all welding technical data see photographed nameplate! Attention: without the gas cylinder seen in the photos
SOYER BMS-901 Stud welding machine Manufacturer SOYER Model BMS-901 Condition untested Location 35614 Aßlar DE Lot 11
Professional table, adjustable, lamps, beautician lenses, trolleys and furniture with drawers, workstation, manicure, wax warmer and related ones, handpieces, accessories, aesthetic equipment and various products Auction-ID: A1-49895-135
1. Left device: Cloos GLC 556 (MIG/MAG welding machine) Type / Model: Cloos GLC 556-C (robust industrial device series with separate wire feeder case) Process: MIG/MAG welding power source for professional industrial and workshop use Welding current: Strong power in the upper ampere range (designed for heavy welding work up to approx. 550 A) Mains connection: 3-phase three-phase current (400 V) Construction: Two-part system consisting of a compact power source (on trolley) and an external wire feeder connected by an intermediate hose package Special feature: Often equipped with integrated liquid cooling for the welding torch 2. Right device: Linde MIG 200 (MIG/MAG welding machine) Type / Model: Linde MIG 200 (compact workshop and assembly device) Process: MIG/MAG welding machine (mixed gas / CO2 or suitable for flexible use) Welding current ...
- Complete installation for the preparation and recovery of sand for foundry. - It consists of: - Various feeding and return conveyor belts. - Polygonal sieve. - FELEMAMG SF-RCP permanent magnet magnetic separator. - Bucket elevator, capacity approximately 200,000 kg/hour. - 3 silos for return sand storage, diameter 4000 mm, approximate capacity of each silo 65 m³. - 4 silos for additives with a diameter of 2000 mm, approximate output 8 m³/hour. - Lung hopper. - 3 material reception silos (coal, bentonite and new sand), diameter 3000 mm, capacity approximately 42 m³ each. - DISA SAM 16-180S mixing mill: year of manufacture 2005, serial number 16.180.18.019, load capacity 5,000 kg, cycle 180 sec. - Fine aspiration. - The sand cooler that appears in a photograph IS NOT included. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnect ...
NORBLAST SD9B ist eine Sandstrahlmaschine hoher Präzision, entwickelt für große Genauigkeit und Zuverlässigkeit. Arbeitsraum: Breite 900 mm, Höhe 610 mm, Tiefe 620 mm; Druck 2-8 bar. Technische Daten: Anschluss 230 V, Leistung 0,37 kW; Maschinenabmessungen L1370 x B670 x H1520 mm. Erzielt enge Toleranzen; geeignet für Automotive, Luft- und Raumfahrt, Werkzeugbau und Medizintechnik. Technische Daten ohne Gewähr
Additional technical specifications: • Diameter of storage surface: 50 mm • Incl. digital display • Incl. table booklet for hardness tests • with workbench
Various measuring equipment set consisting of: calipers, hair rippers, micrometers, compasses etc. , see photos for more details Auction-ID: A7-50677-585
Lot of 3 Crown amplifiers and EAW processor without flight case Auction-ID: A1-48746-338
General data: Machine: Vertical powder painting plant Manufacturer: Trevisan Cometal Serial no.: 128/07 Condition: used Power & capacity: Electric: 328 kW Thermal: 1,760,000 kcal/h Conveyor speed: 1.5 m/min Total chain load: 10,000 kg Profile specs: Max dim. (H×W×D): 7000×150×200 mm Max profile weight: 25 kg Equipment included: Pre-treatment tunnel Drying oven Powder coating booths IR oven Curing oven Cleaning & transport systems Complete Trevisan Cometal vertical powder coating plant for aluminium profiles. High-capacity system with full process line from pre-treatment to curing, designed for profiles up to 7 m height. Auction-ID: A7-50603-10
Various depth gauges, angle markers, gauge blocks, gauge blocks etc.; see photos for more details Auction-ID: A7-50677-643
The lot includes various types of luminaires all without lamp as shown in the images Auction-ID: A1-48746-91
• Dimensions of the painting window 1400 width x 1200 mm height • External dimensions 2050 width x 2400 height x 1620 mm length • Filter cleaning system Automatic romer Jet • The type of sheet used: Black steel painted with insulating paint • Max. paint cost 500g/min • Light power 0 watts Electrical/pneumatic data • Type of electrical installation 380-420V 50-60Hz (3P N + PE) • Electrical connection 2.2kW • Pneumatic connection (cabin) quick connector / PUPE10x8 • Air consumption (cleaning) ~300Nl/min • Required air quality – oil below 0.1 mg/Nm3 • Required air quality – water vapor below 1.3g/nm3 Controls • Computer control – 4-inch touch panel • Real-time clock with date • 3 operating modes • Automatic – Filter Clogging Sensor, Automatic – Timer, Manual • Automatic filter cleaning • Settings for distance between fi ...
MOTAN LUXOR A 400-N / ADE 400 Dry Air Generator – 400 m³/h Used industrial Motan dry-air generator / desiccant dryer, suitable for central plastic granulate drying systems. Technical specifications: - Manufacturer: Motan GmbH, Germany - Model: LUXOR A 400-N - Original type: ADE 400 - Original year: 1998 - Factory No.: 4011 - Later Motan identification: 2016 - Serial No.: 768S0016137A1621499Z - Dry-air capacity: 400 m³/h - Supply voltage: 400 V / 50 Hz / 3PE - Control voltage: 24 V DC - Original connected load: 13.9 kW - Heating power: 9 kW - Rated current: 27 A - Fuse: 35 A - Compressed-air supply: 5–7 bar - Weight: approx. 550 kg - Dimensions: approx. 1,200 × 1,100 × 2,450 mm - Siemens 4 kW blower motor - Desiccant/molecular-sieve drying system - ETA-process technology - Integrated regeneration system - CE marked Auction-ID: A7-50717-4
Technical data Manufacturer: GENKINGER Type: FEK 3/17 Year of Make: 1999 Design: manual lift/forklift truck with forks Configuration Manual version with lifting mast, height-adjustable fork and hand crank operation. Auction-ID: A1-50608-69
Donaldson Ultrafilter Oil-Water Separator Oil/water separation system for treating air-compressor condensate before discharge, with polymer housing, condensate connections, drain outlet and external collection containers. Manufacturer: Donaldson Ultrafilter Configuration: Floor-standing polymer housing with blue upper cover, condensate hose connections, drain outlet and collection containers Application: Separation of compressor oil from condensate Maintenance: Uses exchange adsorber elements and requires regular water inspection Condition: Used Approximate dimensions: 800 × 650 × 1,050 mm Approximate weight: 45 kg All descriptions are indicative only. Auction-ID: A1-50546-77
Technical details Type: Precision measuring equipment lot Configuration: - External micrometers - Large outside micrometers - Precision setting standards - Gauge bars - Dial indicators - Machine alignment tools - Circular setting gauges - Precision inspection accessories - Original fitted wooden storage cases Application: - Dimensional inspection - Machine setup and alignment - Toolroom measurements - Quality control - Industrial metrology Construction: - Precision-ground measuring instruments - Hardened steel measuring surfaces - Wooden fitted storage cases Estimated quantity: - Approx. 25–40 fitted wooden cases Condition: Used Observed condition: - Original storage cases included - Instruments appear well protected - No significant corrosion visible - Complete measuring sets appear present - Dust accumulation from long-term storage - Calibration status ...
SIDEL SAMETO Technifill pallets tipper for preforms type EBHS 2050 LD BM 1400 designed for pallets containing preforms feeding the preforms hopper PET blowing machines Suitable for Sidel SBO Universal machines and also other makes New never used Equipment stored and available immediately Top price Ask for a quote here
Various assembly and testing benches, disused equipment and machines, moulds Auction-ID: A7-50851-34
see photos for more details Auction-ID: A7-50868-24
Consisting of calipers, depth calipers, dial gauge and angles in various designs and sizes, weight 20 kg Auction-ID: A1-50626-6
Technical description Machine Type: Crawler Excavator Manufacturer: LIEBHERR Model No.: R954BV LITRONIC Year of Make: 2001 Serial Number: 630-8394 Control: LITRONIC Engine power: 210 kW Operating hours: 9,050 h Boom and configuration Long-front version: available Additional boom: Type LO4651B Boom serial number: 3001335 Boom configuration: Long and short arm boom Attachments: without attachments Auction-ID: A1-50372-8026
TOSH – LOGICA Micro TOSH LOGICA Micro industrial equipment, intended for professional use in a production, control or automation environment depending on its configuration. The machine has a compact design that makes it easy to integrate into different industrial environments. It can be used for automated or control operations requiring precision equipment and a dedicated interface. Features: Manufacturer: TOSH Model: LOGICA Micro Type: Industrial Equipment Design: Compact Use: Professional Environment: production, control or automation depending on configuration Elements and accessories: depending on configuration and elements visible in the photographs Equipment sold as is, with the elements, accessories, wiring and equipment visible in the photographs. The precise operating condition, performance and technical characteristics have not been verified. Auction-ID: ...
Offer 26283 Technical data: - Water-cooled TIG – DC system can be moved, - Welding current infinitely adjustable with digital display - min. 5 A to max. 420 A - Mains connection 400 V - With: - SYNERGIC control system with programmable welding tasks - 2-stroke – 4-stroke setting - HF ignition and liftarc - Gas flow regulation, etc. - Hose package 8m light version - Ground cable - Pressure reducer - Space requirement approx. W 700 x H 1200 x D 1200 mm - Weight approx. 200 kg
Professional mower equipped with 8 discs and designed for frontal mounting on tractors. Its working width of 3 metres allows a high work performance while maintaining a good adaptation to the terrain thanks to its suspension system. The machine is equipped with a PTO drive, a cardan shaft, hydraulic connections, perimeter guards as well as a lighting and signalling device. This mower is in excellent general condition for used agricultural equipment. The chassis, control arms, springs, guards and various equipment have a very nice overall appearance. Robust and professional machine, directly adapted to haymaking work. Key Elements SaMASZ PerfectCUT KDF 300 Year 2018 Working width: 3.00 m 8 discs Front mount Spring suspension PTO drive PTO Speed: 1,000 RPM Weight: 940 kg Gimbal present Hydraulic connections Lighting and signage Perimeter protections Excellent overall ...
3x Philips MVP 506 With 2 transformer cabinets With furnishings Solar Eclipse Auction-ID: A3-46138-19494
Inflatable Playground Equipment with slide. Equipped with the 2 required blowers (1x high pressure) Including Dutch approval certificate. Note: playground equipment empties slowly, so it must be pumped up using the included blower. Auction-ID: A1-47449-4
Lifting capacity 40,000T Incl. remote control and battery charger (FILON CLASSIC). For more details, see photos. Auction-ID: A7-50677-868
maximum number of results exceeded
please refine your search
75 € 
