mec wood used for sale

Year: 2018 - technically efficient, ready to work - after full service - motor: 2.2 kW - automatic hydro-pneumatic feed - pneumatic profile clamping - quick cutter change system - cooling-lubrication installation

table diameter: 160 mm table load: - table height: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic sewing machine Headop feeder Electronic programming Monitor with original programs Lovato 4 + 4 signature openings Thread tension control Thread cut off Device Delivery Minimum Book Size : 75mm x 150mm Maximum Book Size : 320mm x 420mm Mechanical Speed : 9000 Cycles per hour (150 per minute)

The scope of delivery includes: 01x Truss strut, new Manufacturer: Mecalux Material colour: sendzimir galvanised Overall length: approx. 1,218 mm Center-center hole: approx. 1,164 mm f. Frame profile width: 100 mm Ø drill hole: approx. 10 mm U-profile dimensions: 70 x 30 mm Material thickness: approx. 1.5 mm Weight: 1.78 kg | Pcs. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Headop Automatic Feeder With 4 x 4 Openings Opticontrol for pile control Siemens electronic control Job memory Automatic sheet change Lap opener Mechanical opening Colour touch screen Maximum sheet size 510 x 320 mm - 150 x 75 mm 10 x stitches Speed : 180 cycles per minute Two similar machines available at the same place !

Refer to code 1136 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Manufacturer: Mechnika , Year: 2009, Control: Mekanika/Omrom, Work piece width min-max mm: 60-220, Min.-max. workpiece length in mm: 450-2500, Min.-max. workpiece height in mm: 10-40, FREE TEXT: Transporbandlänge ca.4500 mm Übegabestation in Doppelendprofiler, Year :2009

Manufacturer: Mechainak, Type: Handauflegestation, Year: 2005, Control: automatisch, Work piece width min-max mm: 30-200, Min.-max. workpiece length in mm: 100-2600, Min.-max. workpiece height in mm: 10-50, Crosswise feeding: yes, Stacking pattern, single-row: yes, Cycles approx.: ca.8, Feeding speed max m/min: 10-20, Feeding by cross conveyor: yes, Year :2005

Mecalux roller conveyorRoller conveyor 1950-540-450 RA1927 Make: Mecalux Roller width (RB): 450 mm, Steel rolls Nominal/outer width (NB): 540 mm length: 1950 mm Rolls diameter: 50 mm Roller distance 75 mm Overall height frame: 130 mm 2x ITOH-Deki 16936/010 24V Roller drive Conveyor speed: freely adjustable with frequency converter between 0.543 and 0.95 m/s Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2017 Electric data: 24V ITOH-Deki condition: very good (used) Conveying length in mm: 1950 Nominal / outside width in mm: 540 Roll width in mm: 450 Roll division in mm: 75 Driven: YES scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone or e- ...

Inv. Num. : 8284 Type: CS 105 Producer: MECOF Created: 2003, GO 2023 Parameters: Work table length: 6020 mm Work table width: 1060 mm Milling spindle speed: 5-2000 1/min Maximum table load (uniform): 8000 kg X-axis travel: 8300/9300/10300 mm Y-axis travel: 760 mm Travel Z axis: 1200/1700 mm Machine weight: 36000 kg Equipment: Straight extension milling head Universal milling head AC1 Additional table (2 pieces) Additional bracket (2 pieces) GO 2023: Extension head Compensating cylinder leak Transfer 2018: Modification of the steering and drive motor

The scope of delivery includes: 25x balance plate, new suitable for manufacturer: Mecalux Material colour: sendzimir galvanised f. Frame profile: P 101 Material thickness: 1.00 mm Overall width: 155 mm Total depth: 110 mm Hole diameter: 15 mm Number of drill holes: 02 pieces Weight | Pcs.: 0,130 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Hardly used blind eyelet hole and setting machine

Control Heidenhain ... TNC 426 Table dimensions ... 6020x1060mm Axis X ... 8300mm Axis Y ... 760mm Axis Z ... 1200mm SK 50 Spindle speed ... 5-2000 rpm. Max.table load... 8000kg Machine weight ... 36000kg The machine is in good condition, possible to sample under power.

Size: Equipments: with pressing unit Upright stack delivery

table diameter: 500 mm table load capacity: 420 kg table height: 185 mm centre height: 315 mm center hole: MK 5 mm indexing: 15 ° weight: 275 kg dimensions of the machine ca.: 600 x 850 x 200 m Rotary table in excellent condition for for horizontal and vertical use. - Serial No.: P56030 - for vertical or horizontal use - Indexing every 15° or continiously variable by clamping - mech. Hand wheel with scale - Center bore taper MT 5 - Hand Lever with 3x indexing discs The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A dismantled Mecamaq hydraulic press is available. Pressing force: 100t, max. pressure: 290bar, main piston diameter: 200mm/120mm, auxiliary cylinder diameter: 40mm/25mm. Main cylinder working stroke: 500mm, max. installation height: 800mm, working height: 800mm, effective dimensions X/Y: 700mm/500mm, table dimensions X/Y: 800mm/500mm, working speed: 6mm/s, return speed: 150mm/s. Max. tool dimensions X/Y: 800mm/600mm, max. tool weight: 1000kg. Machine dimensions X/Y/Z: approx. 1000mm/1350mm/2750mm, weight: approx. 4000kg. Documentation available. On-site inspection is possible.

A high-temperature rolling machine for glass fiber reinforced compounds is available. 1) Large roller Comerio Ercole, year of construction: 1970, working width: 1500mm, roller diameter: 600mm, roller gap: electrically adjustable, lubrication: circulating oil lubrication. 2) Small roller Meccaniche Moderne, year of construction: 1966, working width: 800mm, roller diameter: 400mm, lubrication: circulating oil lubrication. 3) Horizontal mixer, volume: 2.5m³. 4) Big bag frame with crane. 5) 2x gravimetric dosing scales with control. 6) Conveyor belts and spiral balancing conveyor. 7) Condux HM 45/60 LA hammer mill (lined) with a 1000 mm vibrating screen. 8) 2x Lauda heaters. Including cement mixer, bucket elevator, silo, bagging scales, glass feed rack and a control cabinet for overall plant control. Documentation available. On-site inspection is possible.

VERTICAL COOKER WITH PNEUMATIC OPENING, IN WATER OR BRINE, MECALSA TYPE: MC CDA-2 Technical description: Material: Stainless steel Aisi-304 Heating: Steam/hot water in internal coil Opening: Pneumatic Power supply: 220 V – 50 Hz Capacity: 2 baskets Internal diameter: Ø 1227 mm Outer diameter: Ø 1284 mm Height: 1300 mm

DEFROSTER-MIXER FOR VEGETABLES WITH ROTARY DRUM, MECALSA, TYPE: MC ESC TRL Technical description: Heating: Direct steam Voltage: 380/440V Frequency: 50/60 Hz

LINEAR JAR FILLER FOR SEAFOOD, LEGUME AND OTHERS, MECALSA TYPE: MC- MDP Technical description: Material: Stainless steel Aisi 304 Power supply: 380/400 V - 50/60Hz Formats: Round or other forms

roll diameter: 600 mm roll length: 1800 mm rolls drilled: Flaschenhals Nip adjustment: hydraulisch 0 total power requirement: 132 kW Condition: used, completely overhauled, with warranty Specification: Rolling mill 600 x 1800 mm - used monobloc model - motor under the rolls - roller diameter: 600 mm - roll length: 1800 mm - Roller core with central chamber for water cooling - Fixed friction between the rolls - hydr. gap adjustment: new - hydraulic unit: new - Tiltable steel guide plates - Rollers on bronze bearing bushes with oil circulation lubrication via pump - Rollers with new ball bearing slewing rings, make Maier, for connection to the water circuit to the water circuit - AC main motor: 132 kW - 400 V - 50 Hz - two Safety brake for EMERGENCY STOP - Roller tank made of stainless steel to hold the mixture - Bi-directional safety bars - V ...

Filling material: powder/granulates, bag types: valve bag, filling weight range: 25kg-50kg, max. bagging capacity: 300 bags/h. The machine was used for packing sand. An on-site inspection is possible.

Efficient filling line for beer and non-alcoholic beverages Manufacturer: Krones Model: Krones Block – Mecafill – Starmatic Capacity: up to 30,000 bottles per hour This used Krones machine is ideally suited for breweries and beverage producers looking for a reliable and high-performance filling line for beer and soft drinks. Filler – Mecafill • Products: Beer, soft drinks (e.g. soda, water, soft drinks) • Closures: Crown cap (KK) & screw cap (SV) • Running Direction: Left to Right (clockwise) Labeling Machine – Starmatic • 2 labeling units for: o Front label o Chest label o Back label Availability: Available from February 2026 Technical highlights: • Robust construction "Made in Germany" • Ideal for medium to large productions • Proven Krones quality – reliable and easy to maintain

GAMMA MECCANICA VIBRATING SCREEN, previously fitted on a 1.600 kg/h extrusion line, n.2 ways out: for good and clogged material, machine reconditioned, screen size 2.400 x 450 mm ca, 2,0 kw drive, machine offered reconditioned, availability: 3 weeks from confirmation, capacity: 1.600 kg/h, conditions: refurbished, type: plain vibrating screen

GAMMA MECCANICA WATER RING PELLETIZER, Model TDA 6, stainlesse steel housing and all parts in contact with water, star blade holder for 4 knives, throughput rate 2,0 Tons/h depending on materials and feeding rate, constructed in 2013, complete with stainless steel drying centrifugeù, screen basket in stainless steel, control panel, photos taken before reconditioning, the machine is offered totally reconditioned with warranty, capacity: 2.000 kg/h

MECCANOPLASTICA GRANULATOR, type BLC1000, 1.000 mm wide rotor, 75 kw.drive, hydraulic pack for opening the machine, including loading conveyor belt, metal detector, CEIA, extraction blower, constructed in 2001, offered reconditioned, installed power - used power in work: about 60-65% : 75 kw, availability: 4 weeks from confirmation, working width: 1000 mm., options available: CEIIA metal detector + loading conveyor belt + extraction blower, conditions: will be reconditioned, type: BLC1000

x-travel: 1500 mm y-travel: 800 mm z-travel: 600 mm total power requirement: kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: 2,66 x 1,60 x 3,10 m CNC-controlled Coordinate Measuring Machine for fully automatic measuring of workpieces. Incl. Measuring Software MDM Metrosoft Level 2 for measuring of: - Points, surfaces, circles, cylinders, cones, distances and angles. - SPC software for statistic evaluation of the measurements Machine not operational! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 5500 mm y-travel: 3000 mm z-travel: 1500 mm table-size: 3000x5000 mm table load: 15 t/m2 taper ISO: ISO50 spindle turning speed range: 10-3000 U/min engine output: 17,5 kW Control: FidiaM20 Spindle power: 22 tool magazin:: 24 Rotating speeds: 600-24000 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GAMMAMECCANICA TANDEM SYSTEM 125 mm. 950 kg/h double screening, Throughput rate up to 600-950 kg/h ca, depending on material and feeding rate only 0,30-0,40 Kwh/kg., Line suitable for the recycling for heavily printed, high humidity and contaminated materials., High performance degassing chamber for removal of up to 10 times more gas and humidity in the melted material compared to other systems (so you save on the cost of an agglomerator), The line includes :, Loading conveyor belt, tunnel metal detector, automatic compactor, N.2 Dosing unit for masterbatches and more, 1st extruder with 125 mm. screw Ø 28 L/D, 1st degassing point, FIMIC RAS 500 fully aumatic screenchanger, control cabinet, 2nd extruder with 140 mm. screw Ø 18 L/D, 2nd degassing point, BD-PLAST non-stop screen-changer, TDA6 GM water ring pelletizer, heat exchanging unit, vibrating screen, blower, Water treatment unit ,  ...

Krones can filler blocked with Ferrum can seamer Krones Mecafill with 30 mechanical filling valves Year of manufacturing: 1991 Ferrum can seamer F 308 R (with 6 seaming heads adapted / modified by Imetta / Italy that the can plates are also turning with the machine). Capacity: approx. 14.000 cph by 500 ml standard cans approx. 18.000 cph by 330 ml standard cans can type: standard cans / can type: 211 / 202 with Siemens S 5 with CO2 injection system before seaming The machine was in production until October, 15th 2025 in a brewery in "South Tirol" / Italy. It was professionally dismantled by a German comany and it's now on our stock

Souffleuse MECCANOPLASTICA MP1 - D En bon état de fonctionnement Année 2000 2 postes Force de fermeture : 35 KN Volume max du contenant. : 1,5 litres Diamètre vis. : 60 mm

Core diam.: 230 mm // Material Type: Cardboard, pvc, pp , pe and hdpe cores

Manufacturer: MECAL Model: MC304 Year of Manufacture: 2013 Type: ATLAS Type of Machine : 4-axis machining center Find more here - / Contact us at -

General SKU231U213 MakeSchenck LocationBarneveld CEcheck TypeMechaTron Main Features MaterialStainless steel Length570 mm Width115 mm Specified Features - Vibro feeder Vibro feedercheck Feeder width115 mm Feeder length570 mm Feeder height55 mm Closedcheck With hoppercheck (380 Ltr.) InletDN150, DN200 OutletDN150 With vibro motorcheck (JVM type: JD 40) Without controlscheck MaterialStainless steel Information No.V061565B01 Year of construction2007 Floorspace0.8x0.7 m Total height1.6 m Weight170 kgVibro feedersSchenckConveying systems > Vibro feedersBrand > Schenck What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU271X308 LocationBarneveld CEcheck MakeMecabag System Main Features MaterialStainless steel Motor0.74 KW Number of1 heads Specified Features - Powder filler Powder fillercheck Bag fillercheck Number of dosing heads:1 MaterialStainless steel With jacketcheck General TypeT/01 40975597 Mach.No.RX023/14 Year of construction2014 Floor space2,0 x 1,60 m Total height3,80 m Weight2500 kg Extra SpecificationsHopper dimensions 1500x1300x400 mm, input dia. 200 mm&:nbsp:Powder fillersMéca Bag SystemPackaging machines > Powder fillersBrand > Méca Bag System What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Engine Brand: DEUTZ, Condition: CORE, Nominal Power @ Nominal Rpm: 88 Kw, Bore: 101 mm, Stroke: 126 mm, Engine Capacity: 4040 cc, Qty Cylinders: 4 Qty, Nominal Rpm @ Nominal Power: 2400 Rpm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 4 , Flywheel SAE: Unknown , Engine Condition: Core , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: No Starter Present , Rated Power: 74.9 Kw, Rated Speed: 2100 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/deutz-tcd2012l04-2v-mech-c ore/574, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: TCD2012L04 2V MECH.; Transport weight [kg]: 380

Engine Brand: DEUTZ, Condition: USED, Nominal Power @ Nominal Rpm: 88 Kw, Bore: 101 mm, Stroke: 126 mm, Engine Capacity: 4040 cc, Qty Cylinders: 4 Qty, Nominal Rpm @ Nominal Power: 2400 Rpm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 4 , Flywheel SAE: Unknown , Engine Condition: Core , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/deutz-tcd2012l04-2v-mech-u sed/737, , = More information =, , Type: Engine, Type number: TCD2012L04 2V MECH.; Transport weight [kg]: 482

Manufacturer:Mechatronic Model: mWL 150 square Year of Manufacture: 2019 Weight: 1000 kg Electrical specifications: - Supply: 230 VAC, 50–60 Hz - Supply lead: 3 × 4 mm² L1/L2 (N) / PE - Control voltage: 24 VDC - Full load current: 32 A max - Fuse type: C32A High Inrush Find more here - / Contact us at -

A Mechatronika reflow soldering oven with automatic conveyor with stainless steel mesh is available. Conveyor width: 260mm, max. PCB component height: 25mm, heating length: 900mm, max. temperature: 280°C, conveyor speed: 180mm/min. Machine dimensions X/Y/Z: approx. 1650mm/600mm/400mm, weight: approx. 80kg. Documentation available. On-site inspection is possible. Image is an example.

Gamma Meccanica 105 mm 40 L/D, for LDPE HDPE PP ABS PC PS, Nominal throughput rate 300-400 kg/h depending on feeding rate and material, Average energy consumption : 0,23-0,28 kWh/kg including buffer-silo feeding auger crammed feeder extruder with 105 mm screw 40 LD, n.1 vacuum degassing pump 110 kw a.c.drive with inverter non-stop hydraulic screenchanger (can be fitted with a [fully automatic screenchanger](.germanplast/listings/7610249-used-fimic-ras-325-automa tic-screenchanger)) water ring pelletizer drying centrifuge electrical cabinet user’s manuals and drawings constructed in 2000 offered RECONDITIONED, Total length 11.000 mt., Possible addition of upstream and downstream equipment., options available: fully automatic used screenchanger, capacity: 300-400 kg/h with only 0,23-0,28 kWh per kg produced, conditions: reconditioned, type: buffer silo+crammed feeder, Location: IT- 11020 ...

Sewing machine (21) Stacker Delivery (Meccanotecnica Plus (1995))

x-travel: 4300 mm y-travel: 1000 mm z-travel: 1700 mm Control: TNC430 : : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Meccanica model Italian 92-liter Banbury and Meccanica model Italian 80-liter Banbury.

Inv. Num. : 8951 Type: TDC 622 EDGE MASTER Producer: MECAL Created: 2023 Parameters: Maximum sawing speed: 2400 1/min Cutting length: max. 6000 mm Engine power: 13.5 kW Machine weight: 3200 kg

Souffleuse MECCANOPLASTICA type MP1 - D En très bon état de fonctionnement Année : 2001 1 tete double et 2 postes Controleur de paraison 64 point MOOG Force de fermeture : 35 KN - 3500 kg Volume max du contenant. : 1,5 litres Diamètre vis : 60 mm 4 ventilateurs de refroidissement Puissance maximale de chauffe : 20 KW

roll diameter: 650 mm roll length: 2100 mm rolls drilled: Peripher gebohrt Nip adjustment: hyraulisch total power requirement: 160 kW Condition: used, completely overhauled, with warranty Specification: Meccaniche Moderne rolling mill 650 x 2100 mm - used Model Monoblock – motor under the rolls - Roll diameter: 650 mm - Roll length: 2100 mm - Peripherally drilled rolls for water cooling - Hydraulic gap adjustment: new - Hydraulic unit: new - Tiltable guide plates - Rolls mounted on bronze bearing bushes with corresponding lubrication system - NEW hydraulic unit with DropSa distributors for lubrication of the bronze bushings - Rolls with new ball joints, manufactured by Johnson-Fluiten, for connection to the water circuit - New AC motor: power 160 kW - 400V - 50 Hz - 2x NEW safety brakes for drive motor for EMERGENCY STOP - Stainless stee ...

General SKU371T1118 LocationBarneveld MakeEdwards Pressure Vacuum possiblecheck Main Features MaterialMild steel Volume400000 Ltr. Motor3.7 KW Specified Features - Vacuum pump Pumpcheck Number of pumps:2 Capacity400m³/h With motor2,2kW, 220-240/380-415 With motor1,5kW, 220-240/380-415 Inlet100 mm Outlet25 mm MaterialMild steel With jacketcheck General TypeA38513935 Mach.No.297 Year of constructionunknown Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgear(as is) Floorspace009x0,55 m Total height1,15 m Weight350 kg Extra Specificationsmachine is a 2-stage vacuum pump.Consisting of:Edwards Mechanical booster model EH 500AEdwards High Vacuum Pump model E2M 80Vacuum pumpsEdwardsPumps > Vacuum pumpsBrand > Edwards What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for ship ...

This 4-axis MECAL MC 305 vertical machining centre was manufactured in 2004. It features a powerful 5.5 kW electric spindle, air-cooled, with a maximum speed of 18,000 RPM and an ISO30 tool holder. The tool magazine is centrally located, protected, and supports various tools. It has a standard workpiece length up to 4000 mm and an extended range up to 8000 mm. Contact us for more information about this machine.

Inv. Num. : 9032 Type: Mec3000 Producer: Simec Created: 2019 Parameters: Switch-on hours: 9365 h Input length of the material: 6000–7000 mm. Parting diameter: 12–100 mm. Output length: 50–2000 mm.

Offer 26046 Technical data: - 2 mot. Driven rollers - Manual. Lining of the upper roller - Shaft diameter 30 mm - Shaft rotation 6 rpm - Roller diameter 88 - 108 mm - Bending capacity approx. - Flat steel 50 x 8 mm - Square 20 mm - Round tube 42 mm - Drive 380 V / 0.55 kW - with: - Right / left – run - Tube roller set approx. 16 mm - Weight approx. 150 kg - Space requirement approx. W 650 x H 1300 x D 950 mm