mec wood used for sale

CONTROLS   PC controller BECKHOFF PRESS DESIGN   drive system: knuckle-joint SLIDE   total force (nominal): 160 to   stroke: 60 mm   stroke rate (max.): 70 /min COUNTER RAM   nominal force: 40 to   stroke: 14 mm V-RING   nominal force: 50 to   stroke: 10 mm TOOL DIMENSIONS   lower table (left-right): 480 mm   lower table (front-back): 520 mm   upper table (left-right): 480 mm   upper table (front-back): 520 mm   shut height max.: 314 mm   ram adjustment: 80 mm   distance between columns (H-frame): 500 mm   passline opening (free passage in side columns): 220 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 210 mm   sheet thickness max.: 6 mm   feeding step max.: 999.9 mm   sheet length min: 2000 mm   pilot release system: yes   band lubrication system: yes Complete refurbished fineblanking press: disassembly into individua ...

CONTROLS   PLC SIEMENS SIMATIC OP 47-12 PRESS FORCES   total force (nominal): 200 to PRESS TABLE   table surface (left-right): 2440 mm   table surface (front-back): 1500 mm SLIDE   table surface (left-right): 1500 mm   table surface (front-back): 1100 mm   stroke: 180 mm SLIDE (MECHAN. PRESS)   slide adjustment: 150 mm   stroke rate (min.): 20 /min   stroke rate (max.): 120 /min   main drive power: 45 kW OVERALL SPECIFICATIONS (COIL LINES)   sheet thickness max.: 2.5 mm DECOILER   sheet width max.: 300 mm   sheet width (min): 30 mm   coil weight max.: 3 to   max. diameter of coil: 1500 mm   mandrel expansion range from: 460 mm   mandrel expansion range up to: 530 mm LEVELLER UNIT   sheet width max.: 30 mm   sheet width (min): 300 mm   number of leveller rolls: 9   diameter of leveller rolls: 30 mm   number of intermediate rolls: 11   feed  ...

Mechanical tools for crimping PEX pipes are used for aluminum-plastic pipes, PEX pipes, PB pipes, and pipes to be connected with copper pipes and joints, as well as for clamping stainless steel sleeves, copper sleeves, aluminum sleeves, etc. Auction-ID: A7-49495-32

Mechanical tools for crimping PEX pipes are used for aluminum-plastic pipes, PEX pipes, PB pipes, and pipes to be connected with copper pipes and joints, as well as for clamping stainless steel sleeves, copper sleeves, aluminum sleeves, etc. Auction-ID: A7-49495-132

Mechanical tools for crimping PEX pipes are used for aluminum-plastic pipes, PEX pipes, PB pipes, and pipes to be connected with copper pipes and joints, as well as for clamping stainless steel sleeves, copper sleeves, aluminum sleeves, etc. Auction-ID: A7-49495-232

FLOOR TYPE CNC D-ELECTRON Z32 Longitudinal stroke axis X mm 8300 Cross stroke axis Y mm 1000 Vertical stroke axis Z mm 1900 Table dimensions mm 10.000x1060 T-slots mm 22H7 T-slots distance mm 175 Spindle motor Kw 36 Spindle speed Rpm 10:2000 Spindle taper ISO 50 DIN 69871 Automatic universal milling head: -A Axis indexing 1° -B Axis indexing 3° Tool changer 40 positions Max installed power kW 160 EQUIPPED WITH: -Rotary table diameter 400 mm and counter-support -Chip conveyor RETROFIT 2019 Auction-ID: A1-48745-12

Sliding doors for industrial freezer with frame and sliding mechanism- 2 doors Auction-ID: A7-49776-7

CNC FIDIA CXR Axis Travel: X mm 2500 Y mm 1000 Z mm 1200 rapid feedrate mm/min 15.000 TABLE: Dimensions mm 2700x900 MAx load on the table 8000 kg n. 7 T slots 22 mm RAM square section mm 390x390 spindle motor power 20 Kw SPINDLE automatic birotative milling head 1 / 3 degree Spindle nose ISO 50 Max spindle speed 4500 rpm Max torque Nm 760 EQUIPPED WITH: n.2 chip conveyor Movable and rotating operator panel Cooling unit Auction-ID: A1-48745-14

PRESS DESIGN   drive system: hydraulic SLIDE   total force (nominal): 40 to   stroke: 45 mm   stroke rate (max.): 110 /min TOOL DIMENSIONS   lower table (left-right): 300 mm   lower table (front-back): 280 mm   shut height max.: 90 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 1835 mm   space requirements -front/back-: 1500 mm   total height: 1800 mm   total weight approx.: 2500 kg

SLIDE   total force (nominal): 80 to   stroke rate (max.): 120 /min V-RING   stroke: 90 mm TOOL DIMENSIONS   lower table (left-right): 420 mm   lower table (front-back): 420 mm   upper table (left-right): 420 mm   upper table (front-back): 420 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 2970 mm   space requirements -front/back-: 1665 mm   total height: 242 mm   total weight approx.: 6000 kg

Mecof CS500 High Rotation CNC Head Type: High-speed CNC milling head Manufacturer: Mecof Model: CS500 Year of build: 2012 Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-49922-62

Used MEC ISO DPS 12-12-1C bottling line - 2600 BPHTechnical Specifications & Performance DataThis used bottling line is configured for glass bottle handling in 0.33L and 0.5L formats. The line combines filling, carbonation, sterile filtration, CIP cleaning, labeling, date coding and rotary bottle handling equipment for beverage production and industrial packaging applications.Container type: Glass bottlesCompatible formats: 0.33L and 0.5L bottlesFiller: Eurostar ISO DPS 12/12/C counter-pressure filler, 2,600 bphSTS labeling machine: S2T3/R1 front, back and neck labeling with date stamping, 2,500 bphCanellitech wraparound labeling machine: 3,000 bphCondition: Fully refurished in 2022. Filtration: 5 micron, 1 micron and 0.45-micron sterile filtration stagesCIP system: 2 x 350L tanksAdvanced Automation & Control SystemsThe line includes dedicated date-coding equipment, combining the STS int ...

AI VC MECHANICAL STRIPPING SYSTEM DIMENSION: 48 X 45 X88 MANUFACTURER: AIMS MOTION TECHNOLOGY FOR MORE INQUIRY KINDLY REACH OUT TO: HAKKIM (F25): +60 12-343 6052 FATIMAH ASMAD: +60 13-628 7197 IZLIN ISMAEL (F22/25): 018 258 2737

AI VC MECHANICAL STRIPPING SYSTEM DIMENSION: 48 X 45 X88 MANUFACTURER: AIMS MOTION TECHNOLOGY FOR MORE INQUIRY KINDLY REACH OUT TO: MUSTAQEEM (F22): +60 19 506 7040 FATIMAH ASMAD: +60 13-628 7197 IZLIN ISMAEL (F22/25): 018 258 2737

Year & Manufacturer: 2001 — MECANOBOIS Dimensions (mm): 3000 × 2200 × 1600 Power supply: 400 V Auction-ID: A1-50001-24

Used industrial OF.ME.R. Mechanics TP 24/28 combined reinforcing steel bending machine, manufactured in 2010. Heavy-duty stationary machine intended for bending reinforcing steel/rebar, fitted with a rotating bending table and interchangeable bending pins/tooling. The machine features a control panel with emergency stop, selector switches and push-button controls, as well as a foot-operated control pedal. Various bending pins, stops and tooling/components are included on the machine as pictured. Electrical connection is via an industrial three-phase plug. Operational condition has not been verified; offered in its current condition as pictured. Auction-ID: A7-50083-27

Pneumatic Press incl. tools and foot pedal see pictures Condition: unchecked (6) Auction-ID: A7-50084-120

fully functional dismantled Auction-ID: A7-50024-2

Mechanical tools for crimping PEX pipes are used for aluminum-plastic pipes, PEX pipes, PB pipes, and pipes to be connected with copper pipes and joints, as well as for clamping stainless steel sleeves, copper sleeves, aluminum sleeves, etc. Auction-ID: A7-50065-132

Mechanical tools for crimping PEX pipes are used for aluminum-plastic pipes, PEX pipes, PB pipes, and pipes to be connected with copper pipes and joints, as well as for clamping stainless steel sleeves, copper sleeves, aluminum sleeves, etc. Auction-ID: A7-50066-32

Mechanical tools for crimping PEX pipes are used for aluminum-plastic pipes, PEX pipes, PB pipes, and pipes to be connected with copper pipes and joints, as well as for clamping stainless steel sleeves, copper sleeves, aluminum sleeves, etc. Auction-ID: A7-50066-232

Mechanical tools for crimping PEX pipes are used for aluminum-plastic pipes, PEX pipes, PB pipes, and pipes to be connected with copper pipes and joints, as well as for clamping stainless steel sleeves, copper sleeves, aluminum sleeves, etc. Auction-ID: A7-50066-132

22 L tank, with lance. Never used Overall dimensions: 330 x 330 x 1000 mm Weight: 8 kg Auction-ID: A7-50208-238

Mechanical tools for crimping PEX pipes are used for aluminum-plastic pipes, PEX pipes, PB pipes, and pipes to be connected with copper pipes and joints, as well as for clamping stainless steel sleeves, copper sleeves, aluminum sleeves, etc. Auction-ID: A7-50065-32

Ideal Standard Oleas Series Mechanical Control Panel, Model M2. The panel is equipped with a double flush function and is suitable for use in combination with mechanically operated Ideal Standard ProSys built-in reservoirs. The control panel is mechanically operated by means of push buttons and comes with mounting kit and control rods. The version has a white, glossy finish. \"The item is sold in its current state (As-Is), and as described. The lot description is leading for the content; Any accessories, decoration or other items that are not mentioned in the description are not included in the lot.\" Auction-ID: A1-49250-66

Mechanical tools for crimping PEX pipes are used for aluminum-plastic pipes, PEX pipes, PB pipes, and pipes to be connected with copper pipes and joints, as well as for clamping stainless steel sleeves, copper sleeves, aluminum sleeves, etc. Auction-ID: A7-50065-232

CONTROLS   electronic controls BECKHOFF PRESS DESIGN   drive system: servomechanic   number of slide actions: 1 PRESS FORCES   total force (nominal): 100 to PRESS TABLE   table surface (left-right): 950 mm   table surface (front-back): 660 mm SLIDE   slide force: 100 to   table surface (left-right): 550 mm   table surface (front-back): 460 mm   spigot hole diameter: 50 mm   stroke rate (max.): 130 /min SLIDE (MECHAN. PRESS)   slide adjustment: 80 mm   stroke min.: 20 mm   stroke max.: 160 mm   stroke rate (min.): 70 /min   stroke rate (max.): 130 /min   main drive power: 25 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 370 mm DECOILER   design: single reel   sheet width max.: 400 mm   coil weight max.: 1.25 to   max. diameter of coil: 1250 mm   mandrel expansion range from: 375 mm   mandrel expansion range u ...

- Sica BA. NS.H. 1T 32-200, year 2000 with 6 mtr. belling table - Including A614 conveyor belt - 1 pc. Ring fitting device • Solvent cement belling tools: 25mm, 32mm, 1\", 40mm, 11/4\", 45mm, 70mm, 80mm, 3\", 100mm, 4\". • O-ring mechanical mandrel: 2\", 75mm, 110 mm, 160 mm, 3\", 4\" Auction-ID: A1-50242-62

CONTROLS   electronic controls PRESS DESIGN   number of suspensions: 2   opening in table: yes PRESS FORCES   total force (nominal): 45 to PRESS TABLE   table surface (left-right): 550 mm   table surface (front-back): 450 mm SLIDE   slide force: 45 to   table surface (left-right): 550 mm   table surface (front-back): 360 mm   stroke: 50 mm   stroke rate (max.): 400 /min SLIDE (MECHAN. PRESS)   slide adjustment: 50 mm   stroke min.: 10 mm   stroke max.: 50 mm   stroke rate (min.): 80 /min   stroke rate (max.): 400 /min TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 305 mm Grid 2016 Completely Overhauled

System: conventional pallet racking (palettisation conventionnelle), single row against the wall Load unit: Europallet, max. 1 150 kg per pallet, 2 pallets per level Max. pallet dimensions: 1 200 x 1 000 mm, height variable Load levels: 2 beam levels, at 1 650 mm and 3 300 mm Beams: type 2C-S 1115, 2 225 mm long, max. 2 300 kg uniformly distributed per pair of beams, all levels Uprights: ladder type P80, max. 2 300 kg per module excluding floor level Quantity: approx. 4 bays as shown on the photographs supplied; the exact number of frames and beams is to be counted on site Technical inspection: the inspection label on the frame gives 2023 Remarks: Mecalux load plate and safety instruction plate fitted to the run. Values above are taken from that load plate. Auction-ID: A1-48805-237

Raskin mechanical press manufactured in Angleur (Belgium). Estimated capacity of 35 tons. Heavy cast iron machine equipped with flywheel, grooved table and mechanical clutch. Sold in the condition visible in photos. Ideal for punching, light cutting, stamping or workshop work. Auction-ID: A3-46126-35825

CK Mechanical Livestock Drinking Pump with Plastic Sanitizing Tray – 2000 × 880 × 110 mm Specifications: Pump Brand: CK Type: Mechanical Cattle Drinking Pump / Grazing Pump Suitable for: cattle Pump principle: mechanical Dimensions of plastic disinfection/disinfection tray: approx. 2000 × 880 × 110 mm Features: Large nose/pressure control lever Integrated drinking trough Water/suction connection at the bottom Robust cast metal pump housing Mounting points Plastic disinfection/disinfection tray with raised edges Particularities: The plastic container is suitable for use with disinfectant/disinfection liquid. Used condition with signs of wear and age. Exact capacity and maximum suction height of the pump are unknown. Operation not tested, pump is new product unused Condition and completeness as visible in the photos. Auction-ID: A1-47391-325

Supplied with accompanying manual, capacity 2000kg/h; power 90 kW; rotor 1398 Rpm, material is dried in steel tumble dryer, Equipped with stainless steel feed screw conveyor; Discharge height approx. 2800 mm, product is removed by transport blower, machine has only served in test set-up approx. 800-850 operating hours, forklift/crane available for loading and view website reantec.de for other information. Auction-ID: A1-49862-5

With infeed roller conveyor size approx. 605x60x87 cm and roller stand Note: Rack with material not included Auction-ID: A1-50251-7

Supplied with accompanying manual, capacity 2000kg/h; power 90 kW; rotor 1398 Rpm, material is dried in steel tumble dryer, Equipped with stainless steel feed screw conveyor; Discharge height approx. 2800 mm, product is removed by transport blower, machine has only served in test set-up approx. 800-850 operating hours, forklift/crane available for loading and view website reantec.de for other information. Auction-ID: A1-49862-4

Hydraulic band saw machine with - material feed single 1000mm - saw blade tension motorized - emergency stop device - replacement saw blades cutting diameter 420 mm saw blade length 5744 x 1.3 x 41 mm cutting width 420 mm cutting speed 15 - 110 m/min drive saw blade 7.5 kW machine weight approx. 3.5 t space requirement approx. 2.9 x 2.4 x 2.1 m Auction-ID: A7-50523-705

equipped with backgauge, foot control, angle guide. Auction-ID: A1-50090-125

- Starts and drives - Container hook system MEC: Year of construction: 2022 Distance hook - rollers (retracted): 3.95 meters Distance hook - rollers (extended): 5.15 meters Hydraulically extendable bumper: +85cm - Loading crane Copma 208HP.2: Year of construction: 2022 4570 kg at 4.15 meters 3125 kg at 6.05 meters 2365 kg at 8.0 meters 5th & 6th function Auction-ID: A3-46128-22012

Stackable steel container with mechanical tilting mechanism for emptying into containers by forklift truck. Suitable for bulk materials, metal parts and production waste. Robust steel construction with forklift pockets and stacking holders. Finish in blue paint. Auction-ID: A1-50529-82423

Auction-ID: A1-50275-69

General Description Mechanical stamping press manufactured by ILR , designed for heavy-duty metal forming and stamping operations. The machine has been fully modernized with a PLC control system and is suitable for manual or automatic operation with a sheet feeder. Technical Details Manufacturer: ILR Machine type: Mechanical press Year of manufacture: 1972 Year of refurbishment: 2024 Press force: 250 t Stroke rate (manual): 45 strokes/min Stroke rate (automatic): 20 strokes/min Table size: 1,120 × 740 mm Stroke: 400 mm PLC-controlled digital operating system Operating modes: • Automatic with sheet feeder support • Foot pedal control • Two-hand control Safety light curtains installed Condition Used industrial condition. The machine was refurbished in 2024 and upgraded with a modern PLC control system. Equipped with safety light curtains and multiple operatin ...

Auction-ID: A1-50275-87

Stackable steel container with mechanical tilting mechanism for emptying into containers by forklift truck. Suitable for bulk materials, metal parts and production waste. Robust steel construction with forklift pockets and stacking holders. Sold exclusively as a complete lot. Auction-ID: A1-50529-82422

pressure:800 t distance between columns:2900 mm stroke:350 mm Controls:SIEMENS PRESS DESIGN:. - frame design : H-frame :. - Drive type : mechnical :. - openings in uprights : yes :. - number of cushions:0 - opening in table : yes :. - moving bolster : yes :. PRESS FORCES:. - total force (nominal):800 to PRESS TABLE:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - rectangular breakthrough (width):2000 mm - rectangular breakthrough (front-back):1800 mm - height above floor level:850 mm RAM:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - stroke:350 mm - number of strokes max:55 /min RAM (MECHAN. PRESS):. - ram adjustment:350 mm TOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):1100 mm - distance between columns (H-frame):2900 mm - Free passage between side columns (width):2560 mm ...

turning diameter over bed:240 mm turning length:450 mm total power requirement:0,5 kW weight of the machine ca.:120 kg dimensions of the machine ca.:1500 x 600 x 1200 mm centre height:120 mm spindle bore:21 mm revolutions per minute: 75 - 2980 U/min

pressure:400 t distance between columns:1250 mm stroke:250 fix mm no. of strokes:45 /min distance table/ram, max. stroke up, adjustment up:825 mm table surface area:1000 x 900 mm column travel -side:400 x 700 mm ram surface:1000 x 900 mm ram adjustment:100 mm capacity of ejector in table:40 t ejector stroke:160 mm power capacity:270,0 kW weight:44,0 t Dimensions (WxDxH):2,4 x 3,6 x 7,2 m height over floor:6,4 m

pressure:125 t stroke:25 fix mm no. of strokes:70 - 700 /min distance between columns:1150 mm distance table/ram, max. stroke up, adjustment up:400 mm table surface area:1150 x 1000 mm hole in the table:900 x 220 mm side window:650 mm ram surface:990 x 850 mm ram adjustment:60 mm material width:250 mm material thickness:2,5 mm power requirement:46,5 kW weight:29,5 t roll feed:mechanical, Schuler, WK 8-250

pressure:063 t stroke:70 fix mm no. of strokes:15 - 60 /min distance between columns:1340 mm width between oil collecting pans:1180 mm distance table/ram, max. stroke up, adjustment up:328 mm table surface area:1260 x 700 mm hole in the table:1000 x 100 mm table height over floor:1000 mm column travel -side:470 mm ram surface:1300 x 650 mm ram adjustment:100 mm power requirement:27,5 kW weight:13,7 t Dimensions (WxDxH):3,4 x 2,1 x 3,4 m clutch:pneumatic overload protection in ram:hydraulic ram counterbalance:pneumatic ram adjustment:motoric

pressure:100 t distance between columns:1230 mm stroke:20 - 200 mm no. of strokes:20 - 60 /min distance table/ram, max. stroke up, adjustment up:650 mm table surface area:1050 x 750 mm table height over floor:760 mm side window:540 mm ram surface:1000 x 750 mm ram adjustment:100 mm power requirement:18,0 kW weight:20,5 t Dimensions (WxDxH):2,8 x 1,9 x 4,3 m infinitely variable drive:PIV clutch:pneumatic overload protection in ram:hydraulic ram counterbalance:pneumatic ram adjustment:motoric

pressure:500 t distance between columns:2400 mm stroke:400 fix mm no. of strokes:13 - 23 /min Distance table/ram, max. stroke up, adjustment up:1600 mm table surface area:2300 x 1800 mm column travel -side:1600 mm ram surface:2170 x 1800 mm ram adjustment:300 mm total power requirement:110,0 kW Weight:135,0 t Dimensions (WxDxH):3,35 x 4,85 x 7,0 m clutch:pneumatic overload protection in ram:hydraulic ram adjustment:motoric