128,261 used machines on RESALE, but how to find them? Machine Search
Single column - eccentric press WEINGARTEN type ERV 40Masch. No. 537 / 65 Year of construction 1965Compressive force 40 ton. Projection 230 mmTable size 570 x 470 mmPlunger area 250 x 200 mmClamping pin hole 40 mmInstallation height max. approx. 520 mmStroke adjustment 8 - 88 mmPlunger adjustment range 63 mmStroke rate 70 strokes per minuteDrive power 3 kWNetz connection 380 volts, 50 Hz- Table height adjustment- Overload protection by crushing plate- Clutch-brake combination by WEINGARTEN friction threaded coupling-
Single column - eccentric press WEINGARTEN type ER 63Masch. No. 52A / 63 Year of construction 1963Pressure capacity 63 ton. Projection 280 mmTable surface 630 x 530 mmAdjustable plunger stroke 8-100 mmPlunger adjustment 63 mmStroke rate 65 strokes / min. Engine power 4 kWNetz connection 380 Volt, 50 Hz- Clutch-brake combination by WEINGARTEN friction threaded clutch- Electrical stroke release via foot switch- Wheel counters- Overload protection by crushing plate- Front crankshafts Support bearingSpace requirement L x W x H 1500
Single column - eccentric press PELS - RICHTER type PEKR 125Masch. No. 20684 Year of construction 1967Compressive force 125 ton. Projection 430 mmTable size 1100 x 750 mmPlunger area 890 x 650 mmTable opening 400 mmStroke adjustment 6 to 115 mmRam adjustment 100 mmInstallation height largest stroke top max. 450 mmClamping pin bore 50 mmStroke rate 60 strokes/min. Table height above floor 900 mmMotor power 7.5 kWNerg connection 380 volts, 50 Hz- overload protection by crushing plate in the plunger- compressed air
Mechanical pull-down NC Machine vise FRIBOSA Type Size BPrision machine vice, grinding vice, clampJaw width 100 mmJaw height 34 mmWingspan 0 to 130 mmGuideway height 40 mmGuideway length 270 mm- Mechanical machine vice- Clamping area via trapezoidal spindle- Stable base body ground on all sides- Can be clamped horizontally, vertically or laterallyDimensions L x W x H 310 x 100 x 77 mmWeight: 10 kgGood condition; used
Mechanical Dorst TPA 45, Pressing Force max. 450 Kn, Withdrawal force max. 250 Kn, Supporting force in pressing position max. 130 Kn, Die return force max. 60 Kn, Upper punch stroke 120 mm, Upper punch adjusting travel 70 mm, Number of strokes 6-22 1/min, Filling height max. 120 mm, Pressing travel max. 60 mm, Withdrawal travel max. 60 mm, Top pressing travel max 6 mm, Upper punch pneumatic preload max. 30 mm, Compressed air supply , Air consumption , Intake air aprox. 70 l/min, Total connected load aprox. 14,0 Kw, Press dimensions:, Width aprox. 1550 mm, Depth aprox. 1650 mm, Height aprox. 2200 mm, Weight of the press aprox. 3900 Kg, Oil filling quantity :, Press housing 45 l (gear oil), Workplace-related sound 79 dB (A)
Pressing Force max.: 1000 Kn, Withdrawal force max.: 800 Kn, Supporting force in pressing position max.: 600 Kn, Die return force max.: 40 Kn, Upper punch stroke: 220 mm, Upper punch adjusting travel: 200 mm, Number of strokes: 5-18 1/min, Filling height max.: 180 mm, Pressing travel max.: 85 mm, Withdrawal travel max.: 95 mm, Top pressing travel max: 18 mm, Upper punch pneumatic preload max.: 80 mm, Compressed air supply , Air consumption, Intake air aprox.: 140 1/min, Total connected load aprox.: 23,0 Kw, Width aprox.: 1950 mm, Depth aprox.: 1550 mm, Height aprox.: 3900 mm, Weight of the press aprox.: 9.900 Kg, Press housing: 180 l (gear oil), Workplace-related sound: 78 dB (A)
Pressing Force max: 1400 Kn, Withdrawal force max: 1100 Kn, Die return force max: 70 Kn, Upper punch stroke: 220 mm, Upper punch adjusting travel: 220 mm, Number of strokes: 5-18 1/min, Filling height max: 180 mm, Pressing travel max: 90 mm, Withdrawal travel max: 90 mm, Top pressing travel max: 18 mm, Total connected load aprox: 25,0 Kw, Width aprox: 1950 mm, Depth aprox: 1750 mm, ISO 9001: 2008 CERTIFIED COMPANY, Height aprox: 4380 mm, Press housing: 240 l (gear oil), Workplace-related sound: 78 dB A
Pressing Force max.: 2000 Kn, Withdrawal force max.: 1500 Kn, Supporting force in pressing position max.: 1200 Kn, Die return force max.: 50 Kn, Upper punch stroke: 220 mm, Upper punch adjusting travel: 200 mm, Number of strokes: 5-18 1/min, Filling height max.: 180 mm, Pressing travel max.: 90 mm, Withdrawal travel max.: 90 mm, Top pressing travel max: 18 mm, Upper punch pneumatic preload max.: 60 mm, Compressed air supply , Air consumption, Intake air aprox.: 140 1/min, Total connected load aprox.: 26,0 Kw, Width aprox.: 2350 mm, Depth aprox.: 3500 mm, Height aprox.: 5900 mm, Weight of the press aprox.: 19.900 Kg, Press housing: 260 l (gear oil), Workplace-related sound: 78 dB (A)
used
Selling an inventory of a mechanical engineering company. various lathes, milling machines, rolling machines, saws, etc. Pictures on request. The machines are only sold as a package! Not individually
Pressing Force max.: 2000 Kn, Withdrawal force max.: 1500 Kn, Supporting force in pressing position max.: 1200 Kn, Die return force max.: 50 Kn, Upper punch stroke: 220 mm, Upper punch adjusting travel: 200 mm, Number of strokes: 5-18 1/min, Filling height max.: 180 mm, Pressing travel max.: 90 mm, Withdrawal travel max.: 90 mm, Top pressing travel max: 18 mm, Upper punch pneumatic preload max.: 60 mm, Compressed air supply , Air consumption, Intake air aprox.: 140 1/min, Total connected load aprox.: 26,0 Kw, Width aprox.: 2350 mm, Depth aprox.: 3500 mm, Height aprox.: 5900 mm, Weight of the press aprox.: 19.900 Kg, Press housing: 260 l (gear oil), Workplace-related sound: 78 dB (A)
The Dorst DK 250 is a robust used powder compaction press engineered by DORST, offering a substantial pressing force of up to 2500 kN. It supports operations with a maximum withdrawal force of 150 kN and a supporting force in the pressing position reaching 120 kN. Designed for precision, this model includes a 220 mm upper punch stroke with an adjustable travel of 120 mm. The press accommodates a pressing travel and withdrawal travel, each up to 50 mm, making it versatile for various pressing tasks. Operational performance ranges from 6 to 25 strokes per minute, and it provides a filling height of up to 100 mm. The Dorst DK 250 is efficient, consuming approximately 500 liters of air per minute and demanding a connected load of around 60.0 kW. Its dimensions, at 2500 mm in width, 1900 mm in depth, and 4800 mm in height, alongside a weight of approximately 18,500 kg, underscore its solid co ...
CONTROLS PLC SIEMENS S7 PRESS DESIGN drive system: knuckle-joint frame design: H-frame, monoblock openings in uprights: yes number of suspensions: 2 feedstock transport direction: left to right PRESS FORCES total force (nominal): 315 to nominal work capacity: 38 kNm PRESS TABLE table surface (left-right): 2000 mm table surface (front-back): 1200 mm thickness of bolster plate: 200 mm SLIDE slide force: 315 to table surface (left-right): 1995 mm table surface (front-back): 1100 mm stroke: 160 mm stroke rate (max.): 80 /min SLIDE (MECHAN. PRESS) slide adjustment: 140 mm stroke rate (min.): 20 /min stroke rate (max.): 80 /min main drive power: 90 kW TOO ...
The Dorst TPA 50/4 is a reliable, used mechanical powder compaction press designed for precision and efficiency. Offering a robust maximum pressing force of 500 kN and a maximum withdrawal force of 400 kN, it supports a variety of powder compaction tasks. With a filling height up to 180 mm and a pressing stroke of up to 90 mm, this machine is adaptable to diverse requirements. Equipped with an upper punch stroke of 120 mm and an adjustable travel of 220 mm, the Dorst TPA 50/4 provides flexibility for different applications. It operates at a speed of 7 to 32 strokes per minute, ensuring efficient production. The press requires a compressed air supply, consuming approximately 200 liters per minute, with a total connected load of around 18 kW. Constructed with durability in mind, the press measures approximately 2000 mm in width, 1700 mm in depth, and 3250 mm in height, and weighs around 5, ...
The Dorst TPA 50/2 is a used mechanical powder compaction press engineered for precision and efficiency, making it suitable for demanding industry applications. With a maximum pressing force of 500 kN and a maximum withdrawal force of 400 kN, this machine is robust and reliable. This model press allows you a maximum filling height of 180 mm and a pressing travel of up to 90 mm. Designed for versatility, it features an upper punch stroke of 120 mm and an adjustable travel of 220 mm, operating at speeds ranging from 7 to 32 strokes per minute. It requires a compressed air supply with an intake of approximately 200 liters per minute and has a total connected load of around 18 kW. The construction is sturdy and occupies a footprint with dimensions of approximately 2000 mm in width, 1700 mm in depth, and 3250 mm in height, weighing approximately 5,500 kg. The press operates at a workplace-rel ...
The Dorst TPA 5 is a refurbished mechanical powder compaction press, designed for precision and efficiency in industrial applications. It offers powerful performance with a maximum pressing force of 50 kN and a withdrawal force of up to 40 kN. This makes it suitable for a variety of powder compaction tasks, with a filling height of 50 mm and pressing travel capability of 25 mm. This machine provides flexibility with an upper punch stroke of 85 mm and an adjustable travel span of 70 mm, operating at 6 to 30 strokes per minute. It consumes around 50 liters of compressed air per minute and has a total electrical load of approximately 4.00 kW. With durable construction, the Dorst TPA 5 maintains a quiet operation at a sound level of 70 dB(A). The presss compact dimensions, approximately 1200 mm in both width and depth and a height of 2150 mm, with a weight of about 1,200 kg, make it a manage ...
sheet width: 1050 mm plate thickness: 2,0 mm distance between columns: 1050 mm down holder: 1 Stück fence: Tisch 80 - 480 mm fence: Breiten 0 - 600 mm table-size: 1300 x 600 mm work height max.: 760 mm total power requirement: manuell kW weight of the machine ca.: 413 kg. range L-W-H: 2,0 x 1,04 x 1,6 m - Including adjustable stop on the work table for miter cuts - The knife can be lifted easily thanks to the counterweight on the back - Large work table for safe placement of the sheet metal plates - Sheets can be pushed through, i.e. longer sheets can be cut - Handwheel on the front to adjust the back gauge - Comes with a robust cast iron base as standard - Long service life thanks to knives made of quality steel - Standard with hold-down device including quick-release clamp - Robust machine construction for high stability Furnishing: - manual lever shears - stable execution - hold-down ...
gebr. Post-bending press Fabr. Graebener, Type GRNM, YOC 2005 max. bending force 16 t. Tool length 1,600 mm Adjustment of the underswing, hydraulic 2 cylinders Dimensions 5080 x 3290 x 2540 mm Kj Uovvlllerhyxkenb Weight 65 t.
Kircheis 2100 x 3 mm Max worklength: 2100 mm Max tickness: 3 mm Length: 3250 mm Depth: 800 mm Hight : 2000 mm Weight: 2,5 ton
Capacity: 1600 tons Slide stroke: 300 mm Slide stroke length at maximum force: 0,16 mm Distance adjustment between tableand slider: 10 mm Slide stroke number in 1 min: 75 Length of a rod: 920 mm The closed height: 660 mm Table overall dimensions: 940x1200 mm Table height above floor level: 450 mm Slide overall dimensions: 860x910 mm The size of lateral windows: -Height: 560 E5931468 mm -Width: 600 mm Main motor: 110 kW Press overall dimensions: -Length: 5060 mm -Width: 3940 mm -Height above floor level: 5125 mm Press weight: 120 tons
The Dorst TPA 15/3 is a used mechanical powder compaction press designed for precision and efficiency in industrial applications. It provides a maximum pressing force of 150 kN and a withdrawal force of 100 kN, supporting a variety of compaction tasks. With an upper punch stroke of 100 mm and a range of 70 mm for adjusting the travel, this machine offers flexibility for different requirements. Operating at speeds of 7 to 32 strokes per minute, it ensures a reliable production throughput. This press allows for a maximum filling height of 70 mm and pressing travel up to 35 mm, suitable for a range of powder compaction needs. The machine is fitted with a compressed air system that has an intake of around 70 liters per minute and a total connected load of approximately 6 kW. It is compact yet robust, with dimensions of about 1400 mm in width, 1300 mm in depth, and 2650 mm in height, weighing ...
The Dorst TPA 6 is a used mechanical powder compaction press suitable for various industrial applications due to its robust performance and flexibility. It boasts a maximum pressing force of 60 kN and a withdrawal force of 30 kN, addressing a wide range of compaction needs. The machine supports a maximum filling height of 70 mm and a pressing travel of 30 mm, with an upper punch stroke of 95 mm and an adjustable travel of 50 mm. This ensures precise control over the compaction process. Operating at speeds between 7 to 32 strokes per minute, the Dorst TPA 6 consumes approximately 70 liters of compressed air per minute and has a total connected load of about 3.5 kW. It measures 2220 mm in width, 1060 mm in depth, and 2250 mm in height, weighing around 1,200 kg. With a gear oil capacity of 12 liters and a workplace-related sound level of 75 dB(A), it is designed to endure continuous use whi ...
The Dorst TPA 4 is a used mechanical powder compaction press well-regarded for its sturdy performance in various industrial settings. It features a maximum pressing force of 40 kN and a withdrawal force of 30 kN, making it versatile for different compaction tasks. With a maximum filling height of 70 mm and a pressing travel of 30 mm, this machine efficiently handles varied operational demands. The upper punch has a stroke of 95 mm with an adjustable travel of 50 mm, enabling precise control during processes. The press operates within a speed range of 7 to 32 strokes per minute, consuming around 70 liters of compressed air per minute and requiring a total connected load of approximately 3.5 kW. It is designed with dimensions of 2220 mm in width, 1060 mm in depth, and 2250 mm in height, while weighing about 1,200 kg. The gear oil capacity is 12 liters, ensuring durability and the ability t ...
CONTROLS PC controller BECKHOFF PRESS DESIGN drive system: knuckle-joint SLIDE total force (nominal): 160 to stroke: 60 mm stroke rate (max.): 70 /min COUNTER RAM nominal force: 40 to stroke: 14 mm V-RING nominal force: 50 to stroke: 10 mm TOOL DIMENSIONS lower table (left-right): 480 mm lower table (front-back): 520 mm upper table (left-right): 480 mm upper table (front-back): 520 mm shut height max.: 314 mm ram adjustment: 80 mm distance between columns (H-frame): 500 mm passline opening (free passage in side columns): 220 mm STRIP-FEEDER feeder type: roll feeder sheet width max.: 210 mm sheet thickness max.: 6 mm feeding step max.: 999 ...
CONTROLS PC controller BECKHOFF PRESS DESIGN drive system: servomechanic quick die change system: yes feedstock transport direction: left to right SLIDE total force (nominal): 250 to stroke: 70 mm stroke rate (max.): 140 /min COUNTER RAM nominal force: 80 to stroke: 25 mm V-RING nominal force: 125 to stroke: 25 mm TOOL DIMENSIONS lower table (left-right): 600 mm lower table (front-back): 600 mm upper table (left-right): 600 mm upper table (front-back): 600 mm shut height max.: 386 mm ram adjustment: 125 mm COIL CHAIR coil weight max.: 5 to DECOILER design: single reel sheet width max.: 500 mm coil weight max.: 5 to LEVELLER UNIT &nb ...
CONTROLS PC controller BECKHOFF Offer for services of complete Overhaul of a Customer-Supplied Fineblanking Press FEINTOOL GKP 160Scope of Overhaul• Complete disassembly into individual components• Inspection of all parts, including crack testing of critical components• Overhaul of the drive system, new motors• Reworking and precise alignment of all guideways• Complete overhaul of the hydraulic cylinders• Overhaul of the clamping tables• Installation of a new hydraulic unit• Renewal of the pneumatic system• Renewal of the electrical systemModernisation / Retrofit• Combined table • Servo feed systems• Central lubrication system • RAZIOL band lubrication• New brake/clutch unit• BECKHOFF PC-based control system with touch panel• PILZ safety control system• Implementation of CE ...
CONTROLS electronic controls SIEMENS S7 300 PRESS DESIGN drive system: eccentric / crank openings in uprights: yes number of suspensions: 2 table cushion: no quick die change system: yes PRESS FORCES total force (nominal): 250 to PRESS TABLE table surface (left-right): 2000 mm table surface (front-back): 1100 mm height above floor level: 1105 mm opening in bed (left-right): 1700 mm opening in bed (front-back): 305 mm SLIDE table surface (left-right): 2080 mm table surface (front-back): 1000 mm stroke rate (max.): 120 /min SLIDE (MECHAN. PRESS) slide adjustment: 120 mm stroke adjustment: yes stroke min.: 20 mm stroke max.: 180 mm TOOL ASSEMBLY DIMENSIONS & ...
SLIDE total force (nominal): 250 to stroke: 61 mm stroke rate (max.): 60 /min stroke rate (min.): 15 /min COUNTER RAM nominal force: 75 to V-RING nominal force: 75 to TOOL DIMENSIONS lower table (left-right): 540 mm lower table (front-back): 540 mm upper table (left-right): 540 mm upper table (front-back): 540 mm STRIP-FEEDER sheet width max.: 250 mm sheet thickness max.: 10 mm sheet length min: 1500 mm DIMENSIONS / WEIGHTS space requirements -left/right-: 3150 mm space requirements -front/back-: 2120 mm total height: 3000 mm total weight approx.: 14000 kg Located in Barcelona - Spain Installation space of the tools Front passage between the columns: Movable: 560 mm Fixed: 560 mm Side p ...
- Producer MECONAF BV - Gesamtbreite 1.530 mm - Arbeitshöhe 900 mm + - 20 mm - Working width 1300 mm - Length 2500 mm - Roller diameter 80 mm - Roller pitch 150 mm - Motor power 0,75 kW - Voltage / HZ 400 / 50 - Colour 7035 - Location, in stock - Voltage / HZ 400 / 50 - Voltage fluctuation max. +/- 5 %
ABB IRB 6640-205/2.75 Robot Mechanics Only Number of axes: 6 Max. load capacity: 205 kg max. working range: approx. 2750 mm Year of construction 2012 Scope of delivery: robot mechanics 2 weeks commissioning warranty. No further warranty. In addition, spare parts are always available from stock. Freely loaded / ex works. Used goods – normal signs of wear present, yet fully functional. More details and pictures on request.
CONTROLS PC controller BECKHOFF PRESS DESIGN number of slide actions: 13 SLIDE slide force: 3 to stroke: 60 mm stroke rate (max.): 210 /min SLIDE (MECHAN. PRESS) slide adjustment: 6 mm variable speed: yes stroke rate (min.): 70 /min stroke rate (max.): 210 /min main drive power: 4 kW DIMENSIONS / WEIGHTS space requirements -left/right-: 2300 mm space requirements -front/back-: 1000 mm total height: 1900 mm total weight approx.: 4000 kg
Type: 230 Maximale buighoek: 180° Max worklength: 2040 mm Max tickness: 1,5 mm Distance between clampblock -- ram: 100 mm Eletric motor (power): 0,75 kW Weight: 1000 kg
This SEYI SN1-110 was manufactured in 2002. It is a mechanical C-frame crank press with a 110 tons capacity and a stroke of 110 mm. The machine offers an adjustable speed range of 35â65 SPM, a maximum die height of 350 mm, and a main motor of approximately 11 kW (15 HP). Contact us for more information about this machine.
This PRESSIX Pressix 25 CNR 4 was manufactured in 2012. Ideal for high-precision stamping, blanking, and continuous strip processing, it includes a manual decoiler, servo roller feeder G+K WVS/L 150, and a motorized recoiler. Consider the opportunity to buy this PRESSIX Pressix 25 CNR 4 mechanical stamping press. Contact us for more information.
This RAVNE PRESSES Manzoni 315 stamping machine was manufactured in 1992. It features a robust eccentric H-frame, monoblock design with a press force of 3150 kN and a drive power of 60 kW. It has a fixed stroke of 200 mm and slide dimensions of 2550 x 1250 mm. If you are looking to get high-quality stamping capabilities, consider the RAVNE PRESSES Manzoni 315 machine we have for sale. Contact us for more information.
This stamping machine was manufactured in 1992. It features a robust Eccentric H-frame, monoblock design with a press force of 1600 kN and a fixed stroke of 160 mm. The machine includes a magnetic conveyor for scraps, a quick die cart system, and a millutensil oiling system. Ideal for high-quality stamping capabilities, consider the RAVNE PRESSES Manzoni 160 machine we have for sale. Contact us for more information about this machine.
CONTROLS PLC SCHNEIDER PRESS DESIGN drive system: eccentric / crank number of slide actions: 11 feedstock transport direction: left to right PRESS FORCES total force (nominal): 66 to SLIDE slide force: 6 to stroke: 114 mm SLIDE (MECHAN. PRESS) variable speed: yes stroke rate (min.): 40 /min stroke rate (max.): 130 /min main drive power: 7.5 kW STRIP-FEEDER feeder type: roll feeder TRANSFER SYSTEM distance between tools, stroke X fixed: 82 mm DIMENSIONS / WEIGHTS space requirements -left/right-: 2875 mm space requirements -front/back-: 1500 mm total height: 2900 mm total weight approx.: 7500 kg ATTACHMENTS (PRESSES) safety guard / safety door: yes 2-hand engage ...
The Dorst TPA 70S is a used powder compaction press, known for its precise and reliable performance. It delivers a maximum pressing force of 700 kN with a withdrawal force of 400 kN, making it suitable for diverse compaction needs. The machine features a pressing travel of up to 30 mm, with a maximum filling height of 70 mm and operates at speeds between 14 to 40 strokes per minute. This ensures efficient throughput, ideal for high-demand production environments. With an upper punch stroke of 120 mm and adjustable travel of 200 mm, the Dorst TPA 70S offers flexibility in application. It requires a compressed air supply with an intake of approximately 200 liters per minute, and operates on a total connected load of about 20 kW. To enhance functionality, the machine is constructed robustly, maintaining a workplace-related sound level of 78 dB(A), and features a press housing capacity of 19 ...
The Dorst TPA 20/3 is a reliable used powder compaction press known for its robust construction and precise operations. It offers a maximum pressing force of 200 kN and a withdrawal force of up to 100 kN. With a maximum filling height of 140 mm and pressing travel extending to 70 mm, it accommodates a range of powder compaction tasks efficiently. The press is capable of operating at speeds ranging from 5 to 22 strokes per minute, supporting a variety of production needs. It features an upper punch stroke of 200 mm, with an adjustable travel of 160 mm for flexibility across different applications. The machines air supply intake is approximately 160 liters per minute, and it has a connected load of about 15 kW. Constructed with dimensions of around 2000 mm in width, 1700 mm in depth, and 3250 mm in height, the Dorst TPA 20/3 weighs approximately 4,900 kg. It maintains a workplace sound lev ...
Capacity: 1600 tons Slide stroke: 300 mm Slide stroke length at maximum force: 0,16 mm Distance adjustment between table and slider: 10 mm Slide stroke number in 1 min: 75 Length of a rod: 920 mm The closed height: 660 mm Table overall dimensions: 940x1200 mm Table height above floor level: 450 mm Slide overall dimensions: 860x910 mm The size of lateral windows: -Height: 560 mm -Width: 600 mm Main motor: 110 kW Press overall dimensions: -Length: 5060 mm -Width: 3940 mm -Height above floor level: 5125 mm Press weight: 120 tons
Mechanical stamping press manufactured in 2002. This PRESSIX 160 CNR 6 features a capacity of 160 tons and an adjustable stroke ranging from 20 to 200 mm. It operates at a speed of 20 to 70 strokes per minute and includes a motorized slide adjustment of 100 mm. The table dimensions are 1100 x 700 mm, providing ample workspace. If you are looking to get high-quality stamping capabilities, consider the PRESSIX 160 CNR 6 machine we have for sale. Contact us for further details.
22 L tank, with lance. Never used Overall dimensions: 330 x 330 x 1000 mm Weight: 8 kg Auction-ID: A7-44803-238
machine ready for transport and to be assessed on viewing day Auction-ID: A1-44905-65
machine ready for transport and to be assessed on viewing day. Machine has recently been repaired, see photos Auction-ID: A1-44905-64
Crimping pliers, crimping pliers, cable lug pliers, mechanical crimping pliers, pressing jaws, pressing tool for cable end sleeves, wire end sleeves, cable lugs, hand crimping pliers, sleeve pliers, clamp sleeve pliers -Manufacturer: WMW, hand crimping pliers type PH 2.5C -Crimping: of cable lugs and cable connectors -Pressing force: 25.0 N -Pressing stroke: 15 mm -Transport case: incl. accessories, see photo -Quantity: 1x crimping pliers available -Price: per piece -Dimensions of pliers: 600/180/H25 mm -Total weight: 3.2 kg
Crimping pliers, crimping pliers, cable lug pliers, mechanical crimping pliers, pressing jaws, pressing tool for cable end sleeves, wire end sleeves, cable lugs, hand crimping pliers, sleeve pliers, clamp sleeve pliers -Manufacturer: Klauke, hand crimping pliers type K05 -Crimping: of cable lugs and cable connectors -Standard version: 6 - 50 mm -Dimensions: 390/140/H50 mm -Weight: 1.1 kg
Consisting of: 3x Siemens” winders with Boschert” safety chucks, Montalvo” tension controller type SimPlex, 1- air knife, Brush-roller and enclosure, Gardner Denver” ventilator type SAP 300, Siemens” simatec panel, 1x 2-door switching cabinet, with platform and stair, floor space aproxemately 6000x3300mm. Auction-ID: A1-43459-55
The Dorst TPA 350 is a robust used powder compaction press, offering a maximum pressing force of 3500 kN. It is designed to handle demanding applications with efficiency, providing a maximum withdrawal force of 2500 kN and supporting force in pressing position up to 2000 kN. The die return force reaches a maximum of 80 kN. It features an upper punch stroke of 220 mm, with an adjusting travel of 200 mm, ensuring precision in operations. This press operates at a rate of 5-18 strokes per minute, catering to various production speeds. It accommodates a maximum filling height of 180 mm and allows a pressing travel and withdrawal travel both up to 90 mm. The top pressing travel is capped at 18 mm, with an upper punch pneumatic preload maximum of 60 mm, demonstrating versatility in its functioning. It operates with a compressed air supply consuming approximately 140 l/min, backed by a total con ...
maximum number of results exceeded
please refine your search
195 € 
