mec wood used for sale

Chipping Capacity 100mm ; Blade Speed 2530rpm; Engine Type OHV 4-stroke; Starting System E-start; Displacement 420cc ; MAX Engine Speed 3600rpm; Fuel Type Unleaded Gasoline; Fuel volume 6.5L; Oil Volume 1.1L; DUCAR engine; 6780 Auction-ID: A1-45773-185

- Total installed power 2.50 KW. - Portable, with wheels. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-720

Set of 4 new wooden shelves height 87.5 cm width 26 cm length 49.5 cm Auction-ID: A1-45282-163

Chipping Capacity 89mm ; Blade Speed 2400rpm; Engine Type OHV 4-stroke; Starting System recoil; Displacement 420cc ; MAX Engine Speed 3600rpm; Fuel Type Unleaded Gasoline; DUCAR engine; 6778 Auction-ID: A1-45773-181

Code: 0363 Brand: DM Model: T/1000 Wood lathe with single-phase copying device for shaping and turning any wooden workpiece Technical specifications: Single-phase motor 220 V – Power 1000 W Center distance 1000 mm Max turning diameter 340 mm n° 4 adjustable speeds (850 - 1250 - 1750 - 2510 rpm) Belt-driven speed change Spindle connection 1" 8 TPI 4-jaw self-centering chuck Base Overall dimensions mm 1500 x 600 x 1200 h Weight kg 52

Excellent condition - Fully operational - Loading / Transport possible! motor 15 kW, shaft width 600 mm, shaft depth 800 mm, rotor

Hydraulic rotary grapple for wood, universal coupler, 800 mm opening for excavators from 700 to 2700 kg, never used Overall dimensions: 400 x 400 x 500 mm Weight: 45 kg Auction-ID: A7-45832-40

Set of 10 pallets of 25 gratings, i.e. 250 units Compatible for 105 cm and 110 cm deep racks Auction-ID: A1-45489-65

Set of 4 pallets of wooden gratings, i.e. 69 units Compatible for racks with a depth of 110 cm Produced like new Auction-ID: A1-45489-71

SCM brand woodworking CNC machining center, Record 142 TV model, built in 2002 Manufacturer data Manufacturer: SCM Group Model: Record 142 TV Year of construction: 2002 Serial Number: A01/01352 Power supply: 400 V – Three-phase – 50 Hz Approximate weight: 5.800 kg Description CNC machine for the processing of wood panels and elements and derived materials. 3 Axes The machine is equipped with a mobile gantry, a shrouded machining head, as well as a vacuum table with suction cup clamping system for holding the workpieces during machining. Presence of a built-in tool magazine (number and type of tools not verified). The machine is supplied with a separate electrical cabinet, an integrated control console, as well as a conveyor/output table visible on site. A connection for suction is present. Visible equipment CNC vacuum table with suction cups Mobile gantry crane Faired machining hea ...

Pallet of 25 Wooden Gratings for 110cm Deep Pallet Rack (Miscellaneous) Auction-ID: A1-45489-21

Set of 10 pallets of 25 gratings, i.e. 250 units Compatible for 105 cm and 110 cm deep racks Auction-ID: A1-45489-66

Set of 10 pallets of 25 gratings, i.e. 250 units Compatible for 105 cm and 110 cm deep racks Auction-ID: A1-45489-63

Mezzanines of 127m2 Approx. 20.19X6.33 Load capacity of 350Kg/M2 Height under iron: 300cm 4 cells and 10 poles Wood Floor - Grade & Body & Stairway Auction-ID: A1-45489-36

Subcategory: Wood chipper Brand: Bel-Agro Type / model: BX42 Serial Number: 250426021 Year of manufacture / production date: 2025 Own weight: 205 kg Origin: Made in P.R.C. (China) CE marking: ✅ present Auction-ID: A3-43516-11213

Set of 10 pallets of 25 gratings, i.e. 250 units Compatible for 105 cm and 110 cm deep racks Auction-ID: A1-45489-67

Mezzanines of 369m2 Approx. 14.33X25.77 = 369m2 Load capacity of 350Kg/M2 Height under the iron: 360cm 12 cells and 20 posts - 6.20m and 4.50m between posts Wood Floor - Body Grade and Stairway Auction-ID: A1-45489-35

Set of 10 pallets of 25 gratings, i.e. 250 units Compatible for 105 cm and 110 cm deep racks Auction-ID: A1-45489-69

Approx. 14, 75X2.6 = 38m2 Height under iron: 300cm 3 cells and 8 poles Wood floor Auction-ID: A1-45489-37

25 Various Size Wood Grating for Pallet Rack Auction-ID: A1-45489-23

Set of 10 pallets of 25 gratings, i.e. 250 units Compatible for 105 cm and 110 cm deep racks Auction-ID: A1-45489-64

Hydraulic rotary grapple for wood, universal coupler, 800 mm opening for excavators from 700 to 2700 kg Overall dimensions: 400 x 400 x 500 mm Weight: 45 kg Auction-ID: A7-45832-138

Approx. 27.62X6.17 = 170m2 Height under iron: 300cm 5 cells and 12 poles Wood floor Auction-ID: A1-45489-38

Set of 10 pallets of 25 gratings, i.e. 250 units Compatible for 105 cm and 110 cm deep racks Auction-ID: A1-45489-68

Set of 10 pallets of 25 gratings, i.e. 250 units Compatible for 105 cm and 110 cm deep racks Auction-ID: A1-45489-70

Barberan machine manufactured in 2007. This Barberan PUR-33-L is a continuous wrapping line designed for applying PVC foil, CPL, paper, and veneer on various materials using hot-melt technology. It features a robust one-piece electro-welded steel frame, motorized rubber-coated feed wheels, and a slot die extrusion system for precise glue application. If you are looking to get high-quality wrapping capabilities, consider the Barberan PUR-33-L machine we have for sale. Contact us for further details.

This 3-axis WEINIG / DIMTER Unirex 2000 SPB was manufactured in 2007. It features a total power of 45 kW and operates at a nominal current of 110 A. The machine is part of a comprehensive wood production line, including a drilling and milling center, tenon cutting machine, and longitudinal profiling machine. If you are looking to get high-quality wood processing capabilities, consider the WEINIG / DIMTER Unirex 2000 SPB machine we have for sale. Contact us for further details.

Wood production line manufactured in 2023. This ISM ATM-01 is a custom-made automatic production line designed for the fully automated manufacturing of wooden garden screens from individual planks. It features automatic discharge and stacking of finished screens, tilting stacks for efficient processing, and is adjustable for five different screen types. If you are looking to get high-quality wood processing capabilities, consider the ISM ATM-01 machine we have for sale. Contact us for further details.

CNC - processing center Brand: COMEC Type: MD TOP The ideal CNC solution to process narrow and complicated work pieces EASY with COMEC processing length up to 2.000 mm Head configuration individually customizable for: - saw with 360° - axis - milling unit for horizontal and vertical processing - drilling head with separate jumping spindles vertical and horizontal - multiple spindle drilling heads separate jumping even horizontal - horizontal milling unit with 360° C - axis Special developed clamping table, moves automatically program controlled in X direction Furthermore, optionally available: - Automatic raw work piece feed with finished work piece return to the operator TPA control unit: CNC control with graphical user interface Parametric software with 3D modeling Necessary processing macros customized to you pre-installed

Year of construction 2009 like new condition, has worked only sporadically 1 year, Looks machine like new inside The machine is CNC controlled, for the mechanical structuring of thin-film solar cells. The processing heads move over that with a layer of molybdenum metal or other sputtered Glass, with a format 125 x 65 cm, and create an insulating track by material removal. The CNC control controls the movement of the X-, Y-, Z-, A-, and U-axis. all documents, Control Panel, and control are available Original price: 847.000,00 € The complete unit to build a 75MW of production are available. (1 x laser, 2 x mechanical structuring and setting device for needles) Geamt-new value 2.1 mill euro net

Nadelstrukturierer Votan G08 Jenoptik mechanical Ritzer 2012 the Votan again for 160.000,00 euros on the new glass substrates and latest requirements was converted and was no longer in use. Complete unit incl 2 x belt transport table, suction, control Built in 2005 Shipping: 400,00 € (weight ca. 4500 kg)

Frequency-controlled heating laboratory press with force measuring device -Pressure 20 KN / 2 tons -Pressing area 220 220 mm -Maximum pressing force at 220 220 mm: 41 N / cm² -Hot press with moveable lower pressing plate, electric drive with gear reduction, force measurement is carried out by means of strain gauge sensor -Heat output approx. 1 KW -Plate temperature 120 ° C -Dwell time / duration of laminating: 1-10 s -Pneumatic connection 6bar required -Power supply 400 V, 16 A -Sliding table with integrated positioning pins, lower pressing plate, pneumatic drive -Pressing panels with switchable integrated vacuum channel -Electrical control system integrated with PLC control display in the front panel of the machine -Side channel pump to generate the vacuum

(side-front moving table) Nominal force: 1000 ton Slide stroke: 400 mm Continuous slide strokes per 1 min: 20 Single slide strokes per 1 min: 16 Shut height: 1060 mm Slide adjustment: 320 mm Table dimensions: 3150x1800 mm Slide dim., front-back: 1700 mm Window H 1500 x W 1900 mm Hydro pneumatic cushion in table clamping force at P = 0.42 MPa (P = 4.2 kg / cm2), kN 2000 ejection force P = 0.45 MPa (P = 4.5 kg / cm2), kN 200 Main-drive electric motor power: 132 kW DIMENSIONS: 5150x4700x11400 H floor7830 mm WEIGHT:193 ton

; in order

SAeGEWERKS MECHANIZATION MAYRHOFER IN TOP STATE Gate roller with pull-off with hydraulic lifting and vertical lyrical rollers with chain pull puller left and right with hydraulic unit and frequency roller gear 10 m long roll width 1.60 m table width 1.70 m roller drive electric SAFETY AT THE MACHINE PURCHASE NO good

The nominal gain kN 4000 Slide stroke, mm 400 Frequency Slider strokes min-1, 25 The frequency of single strokes, min-1 19 Slider travel to its lowest position, where the press develops the rated force, mm 8 The distance between table and slider in its lower position at the upper adjustment position, mm 470 Size of adjustment of distance between table and slider, mm 160 The size of the table, mm 1000x1000 The size of the slide from front to back, mm 800 Width of windows in racks mm 600 Main electric motor power, kW 37.0 Air flow, m3 / stroke 0,017 Press overall dimensions, mm left to right 3470 front to back 3140 Height above floor level, mm 5940 Weight without hydro pillow kg 32600

Table 1750 x 920 mm, fixed stroke 101 mm, see pictures and description,; All right

Capacity , ton: 800 Stroke, mm: 320 Strokes/min: 20 Shut height, mm: 900 Bed to ram adjustment stroke, mm: 320 Bed dimensions, mm: 2500x1600 Main drive motor power, kW: 75 Overall dimensions, mm: 4220x3500x8356 Weight, ton: 96,6

Axles: 6 Control: IRC5 type: M2004 Load: 180 kg Distance: 2550 mm Year of construction: 2011 Condition: Used, removed functional from the production

Maximum force ton-force 400 Slider stroke length mm 250 Slider stroke length to lower position mm 12 Slider strokes per minute 25 Number of single turn-on 19 Maximum distance between table and slider (in lower position of slider) mm 510 Adjustment mm 160 The sizes of a under-forginig plate mm 1000 Table overall dimensions: mm ·from front to rear 1000 ·from left to right 1000 The sizes of an aperture in a table mm 630 Slider overall dimensions mm 800 x 800 window dimensions in cheeks mm 600 Total power of electric motors kW 43,3 Press overall dimensions mm ·length 3470 ·width 3140 ·height 5940 Press weight without hydropneumatic pillow kg 31 400

MECHANICAL PAPER SCALE WITH HANDPROBE PUNCH M. No.: 618371 Equipment / Additional information: Mechanical Paper Scale Schiltknecht Switzerland F. No: 8351

WEINIG Return Mechanization RF 902 / 15RV WEINIG return conveyor system / workpiece return WEINIG similar to NEUMANN RF24 for the return of scantlings and strips to planing and moulding machines or individual wood sanding machines (one-man operation) Specifications: Workpiece dimensions length 300 – 3500 mm Workpiece dimensions width 30 – 230 mm Workpiece dimensions thickness min. 20 mm Conveyor path cross buffer approx. 1,100 mm Driven infeed and outfeed roller conveyor pneumatically timed Working height 800 – 960 mm Drives: Roller conveyor infeed: 0.18 kW, 30 m/min, constant Cross feed motor 0.37 kW, 40 m/min, constant Roller conveyor outlet: 0.18 kW, 60 m/min, constant Cross transport dimensions: Length 2,250 mm Width 1,570 mm WEINIG intermediate conveyor belt, type LTB 250-3500, S/N 81005, year 1997 Length 3500 mm Width 250  ...

Supply system for sliding ring seals / pressure tank 12L Manufacturer: Fluiten Material: Stainless steel (1.4301) Built: 2000 Volume: 12 L Pressure (max): 16 bar Temperature (max): 99 °C Height: 430 mm (without gauge) Diameter: 219 mm incl. thermometer, gauge and sight glass Condition: new and unused Connections: see drawing Item can be inspected at any time in 76694 Forest by arrangement.

CNC controller: MITSUBISHI MSX-853 IV Axes X-axis travel mm: 560 Y-axis travel mm: 560 Z-axis travel mm: 660 Distance spindle nose - table surface mm: 80-640 Feed rates m/min: 0-60 Worktable Number of pallets: 2 Table dimensions mm: 400 x 400 Maximum workpiece size (D x H) mm: 630x900 Max. workpiece weight kg: 400 APC time s: 9 División estandar Grados: 360 - 0.001º Spindle Spindle speed rpm: 12.000 Spindle drive power kW: 15/11 Spindle torque Nm: 110 Bearing Inner Diameter mm.: 80 Tipo: SJ-2B4351TK Tool system Tool magazine slots: 40 Max. Tool Diameter: 70 With free neighboring places mm: 170 Max. Tool Length mm: 450 Max tool weight kg: 8 Tool Shanks : MAS-BT40 Equipment Chip conveyor Workarea light 4th axis Cooling Tank capacity: 170L High-pressure bar: 15 Machine running times Under power: 64.734 Rated power kVA: ...

ARISA S-2-400-260-FD mechanical press was built in 2000 in Spain by Arisa S.A. (now Nidec Press & Automation Co. (NP&A)). The machine on offer is an excellent choice for series production of components used in the broadly defined automotive or machinery industry. It enables precise punching and stamping of metal parts. All these machining processes are performed with a high press force of up to 400 tonnes, which, combined with a highly dynamic slider, guarantees the best machining results. The ARISA S-2-400-260-FD features a robust, stress-relieved gantry design with an open side wall. This design maintains high rigidity, stable parameters and repeatability during even the most intensive operations with high press force. It is distinguished by the use of two connecting rods, a flywheel drive and an eccentric pinion gear. This solution ensures even torque transmission and smooth and pr ...

Auction-ID: A1-44905-76

PressOne P1S-8 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-8 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 80 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 120 mm / s Pressing speed: max 10 mm / s Extension: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - Progra ...

Qty. 1 Second-hand press for production of Aluminium pots and discs Mfc.: SITI Built: 2005 Renewed in by experts Duration: 3-4 months Force: 4000 Ton Production of Aluminium discs & induction & normal pots Pots height: 120 / 140 mm The press will be overhauled and revamped and sold as specified below: New Piston Grinding of cylinder New Flange Table modification New pumps New gaskets etc . New electric and electronical parts New program

PressOne P1S-5 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-5 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 50 kN Repeatability of the force adjustment: . . . . . . . . . . . . . . . . . Maximum opening speed: 50mm/s Approach speed: 50 mm / s Pressing speed: max 10 mm / s Extension: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing f ...

PressOne P1S-10 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-10 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 100 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 120 mm / s Pressing speed: max 10 mm / s Extension: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - P ...