meat pump used for sale

Claw vacuum pump dry compression Manufacturer: Busch Type: Mink MM 1402 AV Motor: DS 400V suction power: 400 m3/h Final pressure: approx. 200 mbar (abs.) Zubehoer: Operating instructions delivery time: by arrangement; ready for use

; ready for operation

Locking valve vacuum pump DK200 Status: Generalueberholt Gewaehrleistung: 12 months Manufacturer: Leybold Type: DK200 Engine rated power: 5.5KW nominal suction digesters: 200m3/h Final pressure without gasb.: small 5x10e-3 Zubehoer: Operating instructions with spare parts list

Waelz piston pump booster Manufacturer: Busch Type: Panda WV 0500 C/B and Panda WV 1000 C/B available suction swells: 500 - 1000 m3/h Performance: 12 months Status: Generalueberholt Delivery time: by arrangement; ready for use

Status: New Manufacturer: Pfeiffer Type: TMH 064 Mod.-Nr.: PM P02 366 Remark To operateonly with appropriate pre pump and control. delivery time: on request; ready for use

Rotary vane vane vacuum pump- packaging Manufacturer: Busch Type: 251-512 Status: used, tested! Inclusive: Oil filling delivery time: from stock!; ready for use

System: piston diaphragm pump Manufacturer: Abel Type: FDG 322 Machine number: 3506 Year of construction: 1989 Performance: 15 m3 Pressure: 15 bar Engine: BBC, 11 kW, 50 Hz

System: piston diaphragm pump Manufacturer: Abel Type: CM G E272 Manufacturer no.: 10074 Construction year: 2013 Performance: 15 m3/h Pressure: 1.00 MPa Motor: 7,5 kW, 50 Hz

System: used piston diaphragm pump / pump Type: HMD-G-50-500 Flow rate: 40.0 m3/h Pressure: 1,6 MPa

Waelz Piston Pump Booster Vacuum Pump Manufacturer: Busch Typ: Panda WV 4500 B Suction plugs: 4100 m3/h Vacuum: Pre-pump output Gewawting capacity: 12 months Status: as good as new, reserve device; ready for use

Busch two-stage pump level: Data Pump status: Type: BNV 1000 A Vacuum: 0.005 mbar (abs.) data Pre-pump: Type: NC0400B Suction volume: 400m3/h End pressure: 0.05mbar (abs.) Data Booster: Type: WV1000B Suction power: 1000m3/h End pressure: 0.005mbar (abs.) Condition: tested, maintained (good condition) Including: vacuum pre-filter, oil filling Performance: 3 months; ready for use

Leybold pump level Data on pump level: RUTA - Pump system RUTA 1001 (20900895586) (02209= Pre-pump: Leybold Sogevac SV300 Cat: 109 31 booster pump: Leybold Ruvac WAU1001 Kat: 11741 Condition: The pump level is completely cleaned and repainted and tested according to the manufacturer's specifications and is 100% fine, without oil leak Performance: 3 months 22x SV300 +WSU1001H are available! There are 10x SV300 + WAU1001 verguegable! ; ready for use

Waelz Piston Pump Booster Vacuum Pump Manufacturer: Busch Typ: Puma WP 1000 D2 Status: used, tested A complete recovery can be offered as an alternative. Then with 12 months of service to the geraet.; ready for use

LEYBOLD pump level data to the pump status: RUTA - RUTA 1001 (20900895586) Pumpenystem (= 02209 Backing pump: LEYBOLD Sogevac SV300 Cat: 10931 Booster pump: Leybold Ruvac WAU1001 Cat: 11741 Condition: to see in Picture 3-6. The pump stand is completely clean newly painted and serviced in accordance with the manufacturer's specifications and tested and is 100% right, no oil leak Warranty: 3 months There are 2 x SV300 + WSU1001H available! There are 10 x SV300 + WAU1001 verguebar! Price refers to 1 PCs.; ready for operation

Oil- steam jet pump similar to oil diffusion pump Manufacturer: Leybold - Heraeus Type: OB 8000B Condition: used, removed from running plant!

Roller piston vacuum pump Manufacturer: Leybold Type: RA 7000 Status: used Performance: without suction pumps: 7000m3/h lifting agent: mineraloil Delivery time: ex stock

Roots vacuum pump Manufacturer: Leybold Type: RA 7000 Status: used Warranty: without Suction capacity: 7000 m ³/h Beriebsmittel: Mineral oil Delivery time: In stock

Claw vacuum pump Compressing dry Manufacturer: Busch Type: Mink MM 1402 AV Engine: DS 400V Suction power: 400 m ³/h Discharge pressure: approx. 200 mbar (abs.) Accessories: inlet filter; Operating instructions Delivery time: Please enquire; ready for operation

Block vane pump DK200 Status: Rebuilt Warranty: 12 months Manufacturer: Leybold Type: DK200 Rated motor power: 5,5KW Nominal: 200m ³/h Final pressure without GASB.: small 5x10e-3 Accessories: operating instructions spare parts list Delivery: in the short term; ready for operation

Roots pump booster pump Manufacturer: Busch Type: Puma WP 1000 D2 Status: used, tested A complete overhaul can be offered as an alternative. Then with 12 months warranty on the device.; ready for operation

Roots pump booster pump Manufacturer: Busch Type: Panda WV 4500b Suction capacity: 4100 m ³/h Vacuum: Vorpumpenabhaengig Warranty: 12 months Status: New, reserve unit; ready for operation

Rotary vane vacuum pump packing Manufacturer: Busch Type: 251-512 Status: used, tested! Including: oil filling Delivery time: In stock!; ready for operation

Roots blowers Manufacturer: Leybold Type: RUVAC WSU 2001 Cat.-No.: 11741 Suction capacity: approx. 2000 m ³/h Status: Rebuilt Warranty: 12 months (image); ready for operation

Status: As good as new Manufacturer: Pfeiffer Type: TMH 064 Model No.: PM P02 366 Comment To operate only with appropriate backing pump and control. Shipping time: On request; ready for operation

Bush two stage pumps stand: data pump status: type: BNV 1000 A Vacuum: mbar (abs.) 0.005 Data backing pump: Type: NC0400B suction volume: 400 m³/h Discharge pressure: 0, 05mbar (ABS) Data booster: Type: WV1000B Suction power: 1000 m ³/h Discharge pressure: 0, 005mbar (ABS) Condition: tested, serviced (good condition) Includes: vacuum pre-filter, oil filling Warranty: 3 months; ready for operation

Post of 9 stueck submersible pumps and dirty water pumps Manufacturer: Heath Pumps Pumpex (Sweden) Flygt Spt Soendgerath Power ratings from 1.5kw to 6.5kw Pumping capacities up to 120m3/h Foerderhoehe up to 80m Various controls for pumps also with operating hour counter, with float switch or with level monitoring New price of a large pump 4,500.-EUR The pumps were in use for a maximum of 3 years and have been stored ever since. Special price

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Bindler & Schneider Type: ZE 90/10-10-F/SL (Gear pump) Year of manufacturing: unbekannt output capacity: 6000 kg /h pieces: 1 different: guter Zustand I offer this machine in as-is where-is condition ex Warehouse Hess. Lichtenau, unpacked

ABEL water high pressure pump VO - 0215 45 kW, 450 1 / min, 315 bar, Q 180, H 1000, N 62 The pump is dismantled and should be overhauled. A set of all wearing parts in new is available and can be purchased with. Length 160 cm, height 70 cm, depth 70 cm. Weight ca. 500 kg â?¬500 Site 76829 Landau Shipping via forwarding only possible and pick-up preferred, forklifts to load up there.

Sludge feed pump rotary piston pump PL100 Börger Product no.: RE-HU-2019-0701-PK32 System: rotary piston pump sludge feed pump Manufacturer: Börger Type: Pl 100 Speed: 50-700 rpm Flow rate: 2.5 to 38 m3/h Pressure: 12 bar

- very well used and refurbished rotary vane vacuum pump - oil-sealed two-stage fine vacuum pump - Suction speed: approx. 18 m3/h, final pressure: 5x10E-3 mbar

For sale are 20 NEW injection pumps or diesel pumps for 4 cylinder Iveco FPT engine ( 12 volts ) expanded from new engines that were for generators & water pump systems. ( Replaced due to extension to 24 volts ) . Fit for Iveco FPT engine: NEF 45 SM 1 ( 4.5 liters) . Type number & model of pictures. Sale individually or all together Shipping is possible.

For sale are approx. 15 pieces of overhauled or new injection pumps for Deutz 6 cylinders. Please take all data and numbers from pictures. Delivery is possible.

Diodes Pump arrangement / pump chamber for FOBA DP50/FD84 New laser diodes with optimized water cooling, thus longer running times, excellent beam quality, higher laser outputs adjustable 6 months warranty, from the 6th to the 12th month pro rata Article-No. MA-103068 Data sheet with laser characteristic curve Delivery: EXW, collection possible VAT will be shown

Hydraulic pump unit Part Number : Moog - D954Z8001 Arburg - A10VDC 18 DFR1/31R The spare part is in good condition nevertheless, this is a used items, which has slight signs of wear, or may have.

Gear pump Axial Piston Pump NEW/NEW Manufacturer: Rexroth Type: A11VO95DRG / 10R-NSD12K02 Further details and scope of delivery can be found in the Photographs.

Spiral housing Centrifugal pump Manufacturer: Allweiler Type: NT40-160 Diameter: 136mm 30m³/h H: 30m 3500 rpm Electric motor: Manufacturer: Siemens Type: 1LAZ1302AA90-Z 6.3kw NEW, from warehouse resolution for more information see pictures.

Hydraulic pump / hydrostatic pump Manufacturer : Eaton Type : 5422-034 0308026144 CW 0046435916 Further information can be found on the manufacturer's page, or on the type plate, see pictures. Condition: New, may have stock traces, comes from stock. Scope of delivery : see the pictures.

Gear pump Axial Piston Pump Overhauled by the manufacturer + conserved Manufacturer: Rexroth Type: A11VO60EP2G / 10R-NPC12N00H-S Further details and scope of delivery can be found in the Photographs. Grey and red lacquered available. Color may therefore differ from the images. for more information see pictures.

Immersion pump, cooling lubricant pump, Z50-16/2-5,5, 5,5KW, 36m³, 2,1bar, Schmalenberger, mint condition Special price ! If you have a VAT number, we will gladly issue an invoice without VAT As good as new with storage traces! The part was purchased from a spare parts warehouse of a company, was there for some time in stock but never in operation and has minor storage traces. Immersion pump, cooling lubricant pump, Z50-16/2-5,5, 5,5KW, Schmalenberger, as good as new - 400V, 5,5 KW - 2,1bar, 36m³/h - 128 x 35 x 35cm, approx. 100kg - immersion depth 75cm, Function guarantee! For second hand parts, we can not provide a conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

Speed adjustable with frequency converter, Housing and impeller made of cast steel. In mint condition, little used. Manufacturer: GRUNDFOS Type: TPE 100-390/2 A-F-A-BAQE-QX1 Article number: 96110285 Nominal flow rate: 171 m³/h Nominal pressure: 16 bar Nominal transport height: 34 m Mounting length: 550 mm Engine power: 22 kW

Injection pump diesel pump JCB Stanadyne A3 DB4429-6101 Condition: as good as new (test run ex works) Manafacture: Stanadyne Part Number: A3 DB4429-6101 JCB number: 320/0674 On sale are 40 injection pumps from 2012 to 2020. The pumps were subjected to a test run at the factory. When we arrived at our premises, they were staked out, dismantled and stored.

Flow rate: 550 ltr./min Head/pressure: 30 m / 3.0 bar RPM: max 400 1/min KW / Voltage: 3,0 / 400 V Suction side / pressure side: DN 100 milk thread / DN 100 milk thread Type: Stationary on galvanized bearing block, pump head in stainless steel, for highly viscous liquids, built in 2017, L 1,180 mm, W 500 mm, H 720 mm Type: Spiral piston pump 07.014 Manuf.: Herold & Co. GmbH Product number: 2023001

Emulsion pump, coolant pump, without pump housing CET BRNO 2COA2-22 P0 Immersion depth: 220 mm Pump base: Ø 100 mm Pump flange: Ø 130 mm Q: 25 l/ min p: 40 kPa ( 0,4 bar ) motor: 0.16 kW ( 160 W ) 220 - 254 / 380 - 440 V 3AC 50 Hz used, tested ! Dimensions: 375 x 170 x 130 mm

Centrifugal pump, water pump -Manufacturer: gwk, self-priming centrifugal pump type WP 60 -Motor: 0.55 kW 2800 rpm -Pump: Speck Pumps -Max. Flow rate: 45 l/min -Max. Delivery height: 55 m -Quantity: 2 x pump available -Price per piece -Dimensions: 280/140/H150 mm -Weight: 10.8 kg/pc.

Centrifugal pump, water pump, stainless steel pump, food pump, peripheral wheel pump -Manufacturer: SAWA-Schmidhauser, centrifugal pump peripheral wheel pump -Type: F30/50 -Motor: Fig 1.50 kW / 2850 rpm -Dimensions: 480/210/H190 mm -Weight: 30 kg

Side channel pump, feed pump -Self-priming pump -Coupling -Order No.: 32175/90

DEPA Membrane / Diaphragm, 100ltr / minute, Fully refurbished

Variable displacement pump, axial piston pump, replica, new part

Manufacturer : Lewa Model: ecodos 750 P1 Year : 1998 Type : low pressure diaphragm metering / dosing pump   Max capacity : 750 L / H Operating pressure : 5 bars Min / max stroke : 10/0 mm Speed : 113 rpm   Application: sanitary/hygienic for the pharmaceutical, chemical, cosmetics and food industries. Classification: Atex (EEx) Variable speed drive Special acid coating: Stainless steel / PVC-H