135,042 used machines on RESALE, but how to find them? Machine Search
Large Format 3000 x 1500mm With Automation Siemens 840
5 axis CNC – portal profile machining center for all materials - aluminum - steel - stainless steel - plastics - non-ferrous metals. Drilling + tapping, flow drilling, milling + thread milling, as well as sawing at free angles – for example, steel profile saws up to 6 mm wall thickness Largest saw blade diameter 500 mm Largest machining length 7,000 mm Largest workpiece cross-section 650 x H 300 mm Working range in five-axis operation 6,400 mm x 480 x H 300 mm Spindle drive power 17 kW at 100% ED Milling spindle speeds up to 24,000 rpm Moving tool magazine for 12 tools Tool holder HSK 63 Rapid speeds up to 100 m/min / acceleration 2.5 G Space requirement (including control cabinet and control panel) approx. 9 m x 2.5 m x H 2.6 m Weight approx. 5,000 kg. equipment: - OSAI® CNC control - YASKAWA® feed drives and feed controllers - HITECO® milling spindle wit ...
Hydraulic swivel bending machine - ordering machine (delivery time approx. 10-14 weeks), incl. hydraulic dynamic crowning, touch screen, Pressure regulation of the upper cheek, backgauge (1000mm), goat feet with automatic tool clamping, electr./hydr. Adjustment of the bending cheek -Illustrations similar-
Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic CNC – controlled double-sided pre-bending – conical bending device, three hydraulically driven rollers (one hydraulic motor per roll), hydraulic linear sub-roll adjustment – hard chrome-plated piston rods – hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC – control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics – central lubrication system Maximum bending length 2,000 mm Roll diameter 170 mm Smallest weft diameter = 1.1 x the roll diameter The rollers run in bronze plain bearings. Nominal pre-bending performance over the entire bending length at 5 x D = 5 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 7 mm sheet steel/ST40 Drive power ...
Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation - automatic CNC – controlled double-sided pre-bending - Conical bending device - three hydraulically driven rollers (one hydraulic motor per roller) - hydraulic linear under-roll adjustment - hard chrome-plated piston rods - hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics - Central lubrication system
Fiber Laser Machines With working ranges from 3050 mm x 1545mm to 6050mm x 2550mm and TRUMPF TruFiber laser power from 3000W to 12000W For more details please visit Cutform Machines via this link www.cutform.co.uk
Very high-quality CNC – controlled precision sheet metal round bending machine with automatic bending sequence calculation – automatic CNC – controlled double-sided pre-bending – conical bending device, three hydraulically driven rollers (one hydraulic motor per roll), hydraulic linear sub-roll adjustment – hard chrome-plated piston rods – hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC – control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics – central lubrication system Maximum bending length 2,000 mm Roll diameter 170 mm Smallest weft diameter = 1.1 x the roll diameter The rollers run in bronze plain bearings. Nominal pre-bending performance over the entire bending length at 5 x D = 5 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 7 mm sheet steel/ST40 Drive ...
GER RS-12/50 surface grinding machine. Grinding area: 1200x550mm. Distance table-centre of spindle: 625mm. Table speed: 2 to 25m/min. Maximum table travel: 1250mm. Maximum work weight: 1200Kgs. Maximum cross travel: 500mm. Grinding wheel size: 400x80x127mm. Manual diamond grinder. Vertical orientable headstock. Vertical automatic feed. Power of grinding spindle: 12,5cv. Weight: 4500Kgs.
Pressbrake Bending Machines With Bending Lengths from 2050 mm to 4100 and Bending Force from 600KN to 3200KN For more details please visit CutForm Machines via this link www.cutform.co.uk
Wilco WILCOMAT R HSA 02/R 20 VISION fully automatic system for test vials which combines two test methods in the following steps: 1. Headspace Analysis (HSA) to determine the oxygen content in the test specimen (1 test station), 2. VISION for the detection of manufacturing and cosmetic defects (3 cameras), main machine components: 1. Interface with the HMI control panel, 2. In-line feed conveyor, 3. Bypass system, 4. HSA test rotor with the HSA 1 single-head HSA test station, 5. ‘HSA Reject’ and ‘HSA Not Inspected’ trays, 6. Acceleration screw conveyor from HSA to VISION, 7. VISION test rotor with three VISION test stations: Cap 1, Flip-Off, Cap 2, 8. ‘VISION Grey/Uninspected’ tray with star wheels, 9. In-line outfeed conveyor followed by a tray loader, 10. Three (3) electrical control cabinets, 11. One (1) vacuum pump. The following trays are provided for: Tray-HAS Defective ...
Universal Blister machine with platen sealing for pharmaceutical production incl. various format parts and LYNX-5-fill control. The machine processes ALU/PVC blisters and is suitable for tablets, dragées und capsules. The forming an packing machine operates in single stroke (ET), i.e. all stations for the main functions forming, sealing and punching operate in the same cycle, while the film runs through the machine intermittently. Output: 15-50 cycles/min. at 12 mm forming depth | 15-40 cycles/min. at 28 mm forming depth.
TECHNICAL SPECIFICATIONS Manufacturer: BACKERS Description: Star screening and mixing machine Version: wheeled / tracked Undercarriage: Semi-trailer and crawler undercarriage Type: 3-mtbl(c) Year of manufacture: 2018 Operating hours: approx. 4,000 h Screen deck: Star screening machine with separation cut at approx. 80mm Screening area: 4 sqm Throughput (sieving + mixing): 200 t/h Flow rate (screen): 250 cbm/h Binder bunker: 7 cbm Engine: Volvo Motor TAD 572 VE, 160 kW Drive type: Diesel-hydraulic Weight: 30,000 kg Transport dimensions: 13,660 2,550 4,000 (LWH in mm) SPECIFIC COMMENT - Fully functional and ready to drive - Automatic control with numerous settings - Belt scale - Dedusting system - Various spare and wear parts - Areas of application: Excavation/overburden processing, soil stabilization, Production of liquid soil, mixing HGT material
Tensile testing machine Manufacturer: Karl Frank GmbH Type: 81559 Year of construction: 1980 Duck test: height: 1000mm, width: 400mm, depth ungraenzt Force ranges: 2000N, 1000N, 500N, 200N, 100N, 50N Original price at that time: 49.855,00 DM ATTENTION: The device has not been tested for functionality. All information without guarantee
Rated power at 50%ED: 35kVA Short circuit current: 19kA Electrode force: 300daN / single stroke Projection: 395mm --- Welding control: WS 708 (7 times, 8 program) --- Incl. additional options: - Foot switch - Pressure-free lowering of the upper fitting - Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
used
GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical850 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 Uni milling head with controlled B axis HSK-A 63Universal milling head with controlled B axis HSK-A 63 Continuously positioning universal milling head (B axis) with integrated motor spindle for 5 axes positioning and simultaneous machining NC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H11 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning ...
PALLETIZER KRONES ALONG WITH THE CONVEYORS AS SHOWN IN THE DRAWING ATTACHED Palletizer KRONES PRESS UNI, production year 2007. • Palletizer for collective packages, capacity: approx. 50 pallets / h for specific palletizing formats, • Top loading, packs served in 2 tracks, • Pallet magazine, • A feeder for cardboard pads with a magazine for cardboard pads, • Control cabinet based on Siemens S7 control, • A platform for the operator in accordance with the dimensions presented in the layout, • Operator Panel, • Divider, • Packs turner Packs and pallet conveyors in accordance with the presented layout 1. Empty pallets infeed conveyors 2. Packs conveyors
specifications: - Pressure capacity 100 KN / 10 t - Compressive force adjustable 0 - 100 kN - Stroke length 0 - 150 mm - Clear width approx. 200 mm - Lifting speed 0 - 0.6 m/min - Tool height up to approx. 100 mm - Bending performance - with prism MW 100 flat to approx. 100 x 12 mm - Tube bending up to approx. 1 inch - Directional power Wy at straightening block distance of 1m 100 cm³ - Drive 400 V / 1.1 kW - Space requirement approx. W 1100 x H 1000 x D 650 mm - Weight approx. 400 kg
Auction-ID: A1-50608-106
Max Size 520 x 850 mm Min size 100 x 120 mm 4 Buckles Noise hoods High speed feeder head Digital counter with program 1 Electronic knife Hook on shingle belt delivery Implant machine Very good conditions
grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-600 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ± 6 ° longitudinal feed of the table: 1750 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 80 mm total power requirement: 6,5 kW weight of the machine ca.: 2,9 t Version as built by Kellenberger until 2012. Partly overhauled with a warranty period of 12 months after delivery in Germany and neighboring states. Overhauled and geometrical overhauled according to Kellenberger measuring protocol. optional internal grinding attachment up on request - digital display in x-a ...
The machine is in good technical condition and can be tested by prior arrangement. Specifications: 160 mm turning diameter, 285 mm turning length, 40 mm spindle bore, 6000 rpm, 8-position tool turret, hydraulic tailstock, Siemens 840C control system. Includes a laptop with RS-232 connectivity for transferring programs (e.g., from CAM software) to the lathe, as well as the tools currently on the turret, a hydraulic chuck, an extraction system, etc. Unfortunately, the PLC data was lost during a prolonged period of inactivity; however, the Siemens system itself remains intact, so anyone familiar with the system can simply reload the backup and get the machine running again.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 6 total power requirement: 7,5 kW weight of the machine ca.: 4,340 t dimensions of the machine ca.: 3830 x 1160 x 1180mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 8mm total power requirement: 15 kW weight of the machine ca.: 9,7 t dimensions of the machine ca.: 5310 x 1660 x 1590 mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
screw size: 133 mm injection shot weight in Polysterol: 5940 g/PS closing pressure: 8000 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
screw size: 115 mm injection shot weight in Polysterol: 3915 g/PS closing pressure: 6600 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: siehe TD total power requirement: 18,5 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 4260 x 1660 x 1590mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max 50 kg With automatic barrier and conveyor belt Auction-ID: A3-46133-9313
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: siehe TD 0: 20mm (s) Ampullen/h 0: mm 0: mm total power requirement: 22 kW weight of the machine ca.: 9,2 t dimensions of the machine ca.: 4260 x 1660 x 1590 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: kW weight of the machine ca.: 0,2 t dimensions of the machine ca.: 800 x 700 x 1200mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bread mixer with 2 x mixing tubs machine needs to be checked, probably a (sensor) piece. Auction-ID: A3-46133-17440
On cart, including gas cylinder trolley Auction-ID: A1-50393-204
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 8mm total power requirement: 15 kW weight of the machine ca.: 14,1 t dimensions of the machine ca.: 6310 x 1660 x 1590mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 13mm total power requirement: 22 kW weight of the machine ca.: 21,3 t dimensions of the machine ca.: 6560 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: 1,5 kW weight of the machine ca.: 0,385 t dimensions of the machine ca.: 930 x 730, x 1400mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: siehe TD total power requirement: 11 kW weight of the machine ca.: 4,570 t dimensions of the machine ca.: 3830 x 1160 x 1180mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: siehe TD total power requirement: 15 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 4260 x 1160 x 1590mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 30mm (S) total power requirement: 37 kW weight of the machine ca.: 15,3 t dimensions of the machine ca.: 4510 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 16 total power requirement: 37 kW weight of the machine ca.: 23,81 t dimensions of the machine ca.: 6560 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 1000 x 700 x 1380mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
500 € 
