measuring plate used for sale

Ultrasonic gauge Krohne. Manufacturer: Krohne Type: Reflex radar BM100 A Year of construction: 2004 Voltage: 100/240 V Frequency: 50/60 Hz Maximum pressure: 16 bar Protection class: IP67 These ultrasonic knives were recently removed from a container and are therefore for sale. You are in good condition and fully functional!

The DH exxactly. QS is used where a tape measure is too inaccurate and a caliper is too short. Ideal for measuring wooden panels, Aluminium, steel, plastic and glass as well as pipes, profiles and rods. • Version as a tabletop unit or on a mobile base • For dimensional control in the machine room, in incoming goods or quality assurance • Smooth-running guidance for precise and fast measurement • Safe measurement of long workpieces by one person • Measuring range of choice up to 7,000mm (longer version possible on request) • Easy-to-read large digital display "Lowest-Power-LCD" • Power supply depending on the display unit battery or mains connection 100-240 VAC; 50/60 Hz • Dimension display on 1/10 mm

The DH exxactly. TRP is used where a tape measure is too inaccurate and a caliper is too short. Ideal for measuring wooden panels, Aluminium, steel, plastic and glass as well as pipes, profiles and rods. Version as a tabletop unit or on a mobile base For dimensional control in the machine room, in incoming goods or quality assurance For daily inspection of your own machine lines Smooth-running guidance for precise and fast measurement Safe measurement of long workpieces by one person Measuring range of choice 1,000 to 7,000mm (longer version possible on request) Easy-to-read large digital display "Lowest-Power-LCD" Power supply depending on the display unit battery or Mains connection 100-240 VAC; 50/60 Hz Dimension display at 1/10 mm Accessories: With interchangeable centering tips suitable for measuring hole distances Interface with data connection to a PC for logging  ...

Vacuum - Measuring device CVC 2 Manufacturer: Vacuubrand Type : CVC 2 II Cat No. 24411004 Status: proven & functional Zubehoer : User manual Optinal: Power cable Measuring connection cable Delivery time: reserved from stock

Leitz Wetzlar measuring microscope with cross slide and micrometer screws Extensive setting possibilities. Cross table, dislocation 0.01mm shift of the optics via micrometer screw possible. Dhxmkdfga Size approx. 40x Degree scale in optics via micrometer screw rotatable to the reference line Special price

HEXAGON OPTIV CLASSIC 321 GL tp optic measuring machine was built in 2009 in Switzerland. This technologically advanced machine is the best solution for highly accurate measurement and inspection of e.g. electronic parts, micro-hole dies, fibre optics and inkjet nozzles. Thanks to the use of an 8-segment LED ring light with RGB colour sensitivity adjustment, the HEXAGON vision measuring machine detects and captures the edges of coloured parts much more easily compared to standard greyscale or lighting modifications. The offered machine also features, among other things, a 3 axes microprocessor CNC with vector path control, a CCD camera with 6.5x zoom and PC-DMIS Vision metrology software with the innovative MultiCapture function, which finds all 2D characteristics in the field of view simultaneously, increasing the inspection speed by up to 50%. The total weight of the machine is 170 kg. ...

METRIS-NIKON MCA II 5124 measuring machine built in 2011 is a versatile device that can be used for measuring both small-sized objects as well as complex, large-sized parts. In addition, thanks to the computerisation of measurement procedures and its compact design, the machine can be used directly in the production environment or even inside the measured objects. The measurement process starts with an angular displacement of the arms to ‘pass’ through reference points. The operator then brings the machine’s measuring tip to the surface of the measured workpiece and validates the coordinates using a button located on the head. The coordinates are then transformed by the calculation procedures to the cartesian system (X,Y,Z), where they are used as the basis for determining the dimensions by approximation of the measured features and geometric figures, i.e. circles, cylinders and ...

HEXAGON ROMER ABSOLUTE ARM RA-7525-3 coordinate measuring arm was built in 2014 in France by Hexagon Metrology. The device is used for the precise 3D measurement of complex parts, which are usually inspected on complex metrology devices. The process, thanks to the use of absolute encoders, is performed immediately. Simply switch on the arm and start measuring. What’s more, the universal mount allows the change of measuring probes at any time, without the need to recalibrate. The Zero G counterbalance minimises torque in the base of the device, increasing freedom in mounting options, i.e. lightweight tripods, magnetic and vacuum bases. This solution, combined with immediate acoustic and haptic feedback to the operator, allows the machine to be used in even the most demanding industrial environments. When the HEXAGON portable measuring arm is not in use, it can be locked safely in the ...

Volume measuring device incl. weight recording for master data entry, Bosche – used - : Price from location: 8.500.-€ (net)! Manufacturer: Bosche Wägetechnik Type: zippcube Should be size M S/No.: Z201900158 Year of construction: should be 2019 Max. 50kg 16-20 V/DC Weight scale: 110kg With HMI 12 display Combined volume and weight detection in a single pass Ideal for master data acquisition with space measurement Original price: approx. 20.000.-€ (net) zippcube M | Volume and weight detection up to 50 kg. Robust design, precise load cells and intuitive software for efficient logistics. Condition: good Available: immediately Location: Biberach

ZEISS MC 850 X-AXIS STROKE: 850 MM Y-AXIS STROKE: 1200 MM Z-AXIS STROKE: 600 MM WEIGHT APPROSS. 3800 KG DIMENSIONS (W X H X D): 1.6 X 1.56 X 2.95 MM

The SIP Sirius 7 is a high-precision fixed-bridge Coordinate Measuring Machine (CMM) designed for dimensional inspection and quality control in manufacturing environments. Sirius 7 is known for its robust construction and hydrostatic bearing system, ensuring smooth and accurate measurements. Key Specifications • Measuring Range: 1,000 mm × 1,000 mm × 800 mm (X × Y × Z) • Accuracy: ±4 µm (micrometers) • Repeatability: ±2 µm • Guide System: Hydrostatic bearings • Temperature Compensation: Yes • Control Type: Manual (standard), with options for digital or CNC control systems • Probe System: Typically equipped with Renishaw or similar touch-trigger probes • Software Compatibility: Compatible with various metrology software platforms, including PC-DMIS and others

RACING X/Y/Z AXES 900/900/700 MM MEASURING PRECISION 2.2 + L/300 ?M WORKPIECE WEIGHT (MAX.) 1,200 KG CONTROL SYSTEM VAST MEASURING HEAD POINT/POINT CONTROL MODE CONTINUOUS SCAN MACHINE DIMENSIONS WIDTH 1,640 MM LENGTH 1,740 MM HEIGHT 2,700 MM WEIGHT (APPROX.) 2,000 KG

Steel tube arches in different degrees from 10 -45 in different lengths and wall thicknesses Price depending on length and wall

<b>Features:</b> Used roller conveyor Very stable design Feet to order separately Drive type: Gravity without motor Condition: fully functional with traces of usage Ideal for fast material transport Professionally dismantled and packaged <b>Technical data:<b> </b> Dimensions of the roller conveyor</b> Total length: 54,000mm Total width approx.: 740 mm Roll width: 650mm <b>Details of the role</b> Roll diameter 50 mm Axis distance: approx. 75 mm Material: steel, galvanized <b>Information on the framework</b> Frame: Aluminum Rolls: galvanized Frame: As good as new Frame height: 120mm Frame Width: 40mm <b>Roller conveyor</b> The roller conveyor is ideal in the picking zone for interlocking machines or workstations and optimising the internal process. During transport, the ...

Height pliers, parallel pliers, height transfer gauge, height transfer measuring device -Manufacturer: Hommel Werke, height transfer theory -Type: 4626 DBP -Dimensions: 165/140/H430 mm -Weight: 7.6 kg

Force measuring device, force measuring device, calibration, force measuring technology, load cell, tensile force bearing -Manufacturer: ASA-RT -Product: Force measuring bearing type ATB-RP030/600 -Dimensions: 80/65/H20 mm -Weight: 0.6 kg

Pressure measuring device, flow measuring device, measuring and control technology, flow meter -Manufacturer: Brigon, accessories pressure measuring devices -Measuring liquid: green HDM -Measuring range: up to 30 mbar -Dimensions: 95/50/H385 mm -Weight: 0.6 kg

Measuring amplifier, for flow meter, vibration measurement, display device, vibration measurement, monitor display -Manufacturer: HBM, industrial measuring amplifier -Type: PME MP60 -Number: 2 measuring amplifiers available -Price: per piece -Dimensions: 160/60/H145 mm -Weight: 0.9 kg

Measuring and control ring for control of three-point internal micrometers Diameter 50mm Diameter 100mm Diameter 150mm Diameter 200mm More available

Measuring device, measuring device, measuring machine, -Manufacturer: Fagor, position measuring system -Type: R NCT 13-005 3071 11A -Measuring scale: up to 2030 mm -Glass scale: 2070 mm -Dimensions: 3390/355 / H230 mm -Weight: 123 kg

For sale we offer a measuring and weighing system for packages from Bedal. It is a perfect system for all package acceptance or shipping. It can be used for example.B: In shipping at industry, wholesale or e-commerce, fulfillment service providers (e..B. forwarding agents, logistics), or at parcel reception points (e.B. courier services). Package dimensions: Min. BxWxH 10x10x4 cm Max. BxWxH 43x41x48 cm undressed max: LxWxH 75x41x48 cm Tolerance: LxWxH 1.0 x0.5 x 0.5cm Weight: 0.25kg: 0.05Kg (50g) / 25-32kg : 0.075kg (75g) Parcel Kiosk is an economical solution for weighing and dimensioning packages. It is certified by the international organization OIML. Automating packet measurement improves efficiency and saves resources. Thanks to the Parcel Kiosk system, you can be sure that accurate weight and dimensions are read and that your company is protected from errors an ...

Flow meter, vibration measurement, display device vibration measurement, monitor display -Manufacturer: Lorenz, measuring amplifier -Type: GM40 -Price: per piece -Number: 5 piece -Dimensions: 75/20/H110 mm -Weight: 0.1 kg/piece

Measuring device for speed or frequency, tachometer, cutting speed measuring device, hand tachometer, revolution measuring device -Manufacturer: Jaquets Indicator 100REVs 10 m -Accessories: see photo -Case: original case -Dimension box: 120/85/H30 mm -Weight: 0.3 kg

Pressure measuring device, flow measuring device, measuring and control technology, measuring device -imc: universal measuring device µ-MUSYCS -Voltage: 110 - 230 V AC/DC -Dimensions: 330/345/H145 mm -Weight: 6.4 kg

Code 8499 Omschrijving Projektor Fabrikaat Hilger Type TT 288.311 Serienummer 55211 Vergrotingen 10x, 15x, 25x, 50x en 100x

Code 6398 Umschreibung CNC Bahngesteuerte Drei-Koordinaten Messmaschine Fabrikat DEA Typ IOTA 1102 Maschine Nummer 514 Baujahr 1989 Steuerung DEA CU / 01 Tischabmessung L x H x B 1800 x 1000 x 700 mm Längs X = 915 mm Quer Y = 610 mm Vertikal Z = 610 mm Nutzbare Messvolumen 0.34 m3 Gewicht 2050 kg Bemerkungen Maschine hat KEINE Messkopf ( wie Renishaw ) Maschine ist ohne Computer

x-travel: unbek. mm y-travel: unbek. mm z-travel: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

optical angel measuring unit. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Available EMCII to SD machines - P76 - -> sold - P92 - P115 --> sold

Incremental length measuring device + certificate, LS106, ML740mm, Heidenhain, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Incremental encapsulated length measuring device with large-profile scale housing, LS106, measuring length 740mm, Incl. quality test certificate Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return th ...

General: Granite slab 1,400 x 750 x 170 mm

Wenzel roughness and contour measuring station for crankshafts Measuring plate made of hard rock Length: 3670 mm Width: 850 mm Flatness tolerance according to DIN 876/1 Target value 48 μm Actual value 32 μm Ident No.: 14280 JFA Dispensing Blocks Item location: 42859 Remscheid More measuring plates in other sizes - new and used - can be found in our shop! International shipping costs on request!

Length measuring system L-40NC suitable for Kaltenbach circular saw KKS 450 (please request KKS 450 separately) Directly from the customer used from CH-Oberrohrdorf available.

Complete gas measuring station, gas warning meter, Polytron IR Ex, Dräger, used Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! The part was purchased from a spare parts warehouse of a company, is in very good condition and fully functional. The complete gas measuring device is installed in a Rittal distribution cabinet and consists of: - Rittal distribution cabinet 60 x 30 x 80cm high - Air intake pump, IKS Group, 7006 VD 2,3/E/AC - Gas detector Dräger, Polytron IR Ex, - Brooks variable area flow meter 1355/... - Isolating amplifier Pepperl u Fuchs KFA6-SR2-Ex1.W - Circuit breaker and other accessories The air intake pump sucks in the air from the outdoor area and brings it to the Polytron gas detector Ensuring the function In order to ensure functionality, the buyer must inspect or put the goods into op ...

Coordinate Measuring Machine Brown&Sharpe Model: Microval 454 PFX YOM: 1996 Measuring range X-axis: 457 mm Measuring range Y-axis: 508 mm Measuring range Z-axis: 406 mm Max table loading: 225 kg Machine dimensions (LHW): 895x885x1575 mm

DEA GLOBAL S 07.05.05 coordinate measuring machine was manufactured in Italy in 2004. The machine performs fast and highly accurate measurements of workpieces with complex shapes using the contact or non-contact method, represented as a set of coordinate points. The excellent quality and precision of the process is guaranteed thanks to the mounted in the DEA GLOBAL S 07 05 05 CMM machine an indexable RENISHAW PH10MQ measuring head with a RENISHAW SP25M scanning probe, performing measurements in the X,Y,Z axes with feeds of 700 mm (X axis), 500 mm (Y axis) and 500 mm (Z axis). The DEA GLOBAL Status 07.05.05 measuring machine is also equipped with the highly advanced metrology software PC-DMIS 2019 R1, performing detailed geometric measurements. Technical specifications of the DEA GLOBAL S 07.05.05 measuring machine - maximum permissible error of length measurement MPEe: ± 2.3 + 3L/10 ...

Roughness measuring device from the Hommelwerke. The following parts are part of the delivery: - T1000E measuring station - The Hommel Tester LV15 with installed skidding probe T1E, ArtNr 240000 - Power supply for charging the batteries: Type FW 1289 - Control cable for the LV15 to the T1000E - Hommel Printer P 1010 with started paper roll and start print head. -Suitcase

Bizerba CWL Eco flex continuous scale with Sick VMS520 volumetric measuring system Bizerba CWL Eco flex Continuous Scale Dynamic weight detection with volume determination The CWL Eco flex can be integrated almost effortlessly into existing parcel shipping, sorting systems and feeding lines. Bizerba WM-CWL flex Continuous Scale Model: CWL Eco in Motion DE-09-MI006-PTB018 Max 60 kg Min 0.4 kg 230 V Sick VMS520 volume measurement system Features • Non-contact, active measuring method • Measuring the length, width and height of cuboid objects • Measure the length, width and height of objects with almost any shape • Works with a wide variety of surface structures and on different flat conveyor systems • Flexible system configurations • Calculation of the small-envelope cuboid (box volume) • Calculation of the real volume Device components Sick ...

Workpieces are fed in bulk, checked, bad parts are sorted out and good parts are placed in containers as bulk goods. Workpiece: Bolt, Ø 6 - 12 mm Workpiece length: 33 - 56 mm Cycle time: 1.8 s Camera inspection (dimensions and surface defects) - high-resolution matrix camera (21 Mp), dimensions - Line scan camera (4K), surface inspection Parts bunker SKAKO, 71 l volume HSMA07903 up to 125 kg in stock Original price: € 230.000,-

1.Length measuring device with a measuring range of up to 12 meters 2.High Accuracy Linear Guide 3.PC data connection for a documented measurement

Measuring device for speed or frequency -Type: 0516 4750 -Dimensions: 420/320/H90 mm -Weight: 3 kg