measuring machine used for sale

Paint casting machine, paint casting station -Paint casting machine Manufacturer: Bürkle -Max. pouring width: 1290 mm -Adjustable pouring gap: via handwheel with indicator -hydraulically: height adjustable -without: paint pump -Dimensions: 2100/800/H1450 mm -Weight: 386 kg

CNC Thread rolling and gear burnishing machine ESCOFIER P440 CN CNC Siemens New 2004 - like new 2-roll 2 moving heads 4000 daN rolling pressure workpiece diameter: 100mm max. tool diameter: 180-245mm Swiveling: +/-6°, forward speed: 0.1-20mm/s, reverse speed: 0.1-30mm/s motor power: 8.6kW New: 2004 Condition: like new

3000 x 1500mm Sheet 6500mm Tube length 3000w IPG FIBER

Counter support, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 215 to 274 mm, 41 mm high -Drawing with the photos -Number: 2x counter bearings available -Price: per piece -Dimensions: 505/180/H295 mm -Weight: 19 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: 85 by 120 mm 25 mm high -Drawing with the photos -Dimensions: 235/100/H270 mm -Weight: 15.5 kg

SCM fs41 elite Dressing thickness planer Planing width 410mm with 4 TERSA planer knives Two feed speeds 6 and 12m/1 400 V 3KW (4 hp ) S1 100% Dressing table length 2000mm Max chip removal of 5mm Planing shaft D=90mm Work tables made of grey cast iron Table adjustment with numerical display Pass-through height 3-230mm Slanted geared steel feed roller Breaking stop with precise round rod guide 90-45° Suction nozzle 120mm

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 136 by 178 mm 31 mm high -Drawing with the photos -Dimensions: 330/90/H220 mm -Weight: 13 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 96 by 129 mm 22 mm high -Drawing with the photos -Dimensions: 290/80/H190 mm -Weight: 12.5 kg

Pull-off machine for up to 60cm deep ovens Bakery 90x38cm We have several of these pullers in stock. New as well as used. Dimensions: 38cm Wide 90cm Long

Fully refurbished Probat UG22 with chaff cyclone. Main features: Capacity: up to 22kg of green coffee per roast (88kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase, 60Hz (other voltages by request) Gas: natural gas/LPG - modulated burner - separate Siemens motors for every function (drum, exhaust fan, cooling tray arms, cooling fan), enables to roast and cool simultaneously - speed controlled motors on the exhaust fan and drum for maximum control over the roasting process - two digital thermocouples (bean temperature and exhaust temperature) - analog thermometer in the exhaust - new control cabinet with buttons for all the functions doubled by an 10inch touch screen display - Artisan and Cropster connection through RJ45 ethernet cable/socket - new stainless steel cover - new stainless steel cooling tray sheathing - new insulation of the drum - new  ...

Machine vise, sturdy vise, drill vise -Vise: rotatable -Jaw width: 160 x 45 mm -Clamping depth: max. 250 mm -Dimensions: 470/290/H160 mm -Weight: 40 kg

Machine vice, vice, drill press vice -Jaw width: 155 mm -Back height: 80 mm Clamping depth: max. 200 mm -Dimensions: mm -Weight: 35 kg

Grinding machine • For grinding curves and internal radii

1987 Krones Starmatic with many parts

Replacement columns for die-casting machine OL1500, D250x12, Oleopress, refurbished Special price! In addition, we also have a new spar nut and 2 adjusting nuts in separate adverts. If you have a VAT number, we will be happy to issue you with an invoice without VAT. Second hand! The part was bought from a spare parts store of a company, it was overhouled by a specialist company, is in a very good condition and fully functional. Attention: We have not cleaned the column yet, as the fat layer is optimal for storage. Material: Chrome-plated alloy steel Manufacturer Olepress / O.P. DIE Casting Thread 250 x 12mm Thread fixed end 300mm lg Thread adjustable end 1160mm lg Weight approx. 2300 kg Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D ...

Capacity of 800 – 1000 trays per hour. 3 main brushes for cleaning, made of polyamide. 2 brushes for cleaning of perforated trays. All brushes can be adjusted individually to prolong the lifespan. Quick copuling system for the cleaning brushes. (Un-/mounting without tools). Easy fix-System for main cleaning brushes. The whole machine can be cleaned with water. External oil container with sight glass and circulation pump. Mobil scrapings container.

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Voltage: 165 volts -Power: Motor 0.22 kW 17250 rpm at 300 Hz -Socket: Ø 20 mm -Thread: right -Dimensions: 200/70/H85 mm -Weight: 1.9 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 3.7 kW at 2820 rpm at 50 Hz -Voltage: 400 volts -Shaft mounting: Ø 30 mm -Dimensions: 430/230/H145 mm -Weight: 33 kg

Slideways for die-casting machine, 2580 x 125 x 25mm, Idra, Oleopress, new The new slideways from Olepress / OP die casting come from a spare parts stock of an aluminium die casting company. They fit die casting machines like Olepress, Idra and others. See dimensions Slideways, slide rails for aluminium die casting machines, case hardened steel. The bronze bars of the die casting tables slide on these slide rails. 2580 x 125 x 25mm, bores 4 x D20/14 x 2540 x 90 If you have a UID number, we will gladly issue an invoice without VAT. You are welcome to inspect and check the goods at our premises in Austria, 3130 Herzogenburg.

Kersten K 2000, 6.6 kw/9 hp Honda four-stroke gasoline engine, electric and manual start device, stepless hydrostatic drive forward/backward 0-4 km/h, differential, wheels 4.00-8", hydraulic plug-in couplings for device drive. Front sweeper F 1000, working width approx. 1000 mm, manually swivelled left and right.

self adhesive labelling machine, work direction: left-right, safety housing, 4 stations,

Machine vice, vise, drill press vise -Jaw width: 160 mm -Jaw height: 50 mm -Clamping depth: max. 105 mm -Dimensions: 460/163/H123 mm -Weight: 38.3 kg

Machine lamp, machine lamp, work area lamp -Lights: are not used -Dimensions: 270 x 105 x H 65 mm -Connection: 24 V DC 2x6 W -Number: 1x lights available -Price: per piece -Weight: 8 kg/piece

Replacement columns for die-casting machine OL1600, D250x14, Idra, new -50% Special price! As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely as new and in the original packaging. Material: Chrome-plated alloy steel Manufacturer Olepress / O.P. DIE Casting Thread 250 x 14 mm, L 5908 mm, Thread fixed end 290mm lg Thread adjustable end ca. 1160mm lg Weight approx. 2300 kg Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Bending tool, die, upper knife, upper tool, upper beam -Tool: for folding machine -Dimensions: 60 x 15 mm -Length: 1020 mm -Weight: 6 kg

Bending tool, die, lower knife, lower tool, lower jaw -Tool: for swivel bending machine -Widthen: for lower cheek -Dimensions: 59 x 19 mm -Length: 1452 mm -Weight: 10 kg

Replacement columns for aluminium die-casting machine OL2000, D285x10, Oleopress, new -50% Special price! In addition, we also have a spar nut and 2 adjusting nuts in separate adverts. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely new and in ist original packaging. Material: Chrome-plated alloy steel Manufacturer Olepress / O.P. DIE Casting Thread 285 x 10mm, L 6830mm Weight approx. 3400 kg Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Bending tool, die, lower knife, lower tool, lower beam, -Tool: for folding machine -Widening: for lower cheek -Dimensions: 33/76/3040 mm -Bore distance: 280 mm -Hole diameter: 18 mm -Length: 3040 mm -Weight: 33 kg

Rated power at 50%ED: 20kVA Short-circuit current: 15kA Electrode force: 420daN Extension: 130-500mm --- Controls: RS 17 (5-times, 2-program) --- incl. additional options: - Foot switch "powerless set-up" - Tube arm Mk2, straight - Main switch - 3m connection cable with plug --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Table milling machine, table milling machine -Table milling machine: with rigid spindle -Feed: -Speeds: 3000, 4500, 6000, 9000 rpm -Dimensions: 1400/800/H1480 mm -Weight: 600 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 3 kW 1120 rpm -Shaft mounting: Ø 30 mm -Quantity: 1 available -Dimensions: 985/290/H185 mm -Weight: 68 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 3 kW 1720 rpm -Shaft holder: Ø 30 mm -Price: per piece -Number: 1x available -Dimensions: 910/290/H190 mm -Weight: 58 kg

Machine a blocs mobile Contec SP 5 pour la fabrication des blocs, hourdis, blocs U, pavee, bordures, blocs mur etc. Max hauteur de produit 300 mm Min hauteur de produit 100 mm surface travaillant max. 1000 x 500 mm Capacité: jusqu´a 3.500 blocs 400 x 200 x 200 mm / 8-heures poste de production

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 3 kW 1420 rpm -Shaft mounting: Ø 30 mm -Quantity: 1 available -Dimensions: 670/290/H190 mm -Weight: 57 kg

Thread cutter, tapping machine, tapping machine -Integrated reversing gear with fast reverse -Nominal consumption: 230 watts -Max. Cutting capacity: M6 -Connection: 230 volts -Weight: 2.3 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 2.4/3.3 kW 1720/3420 rpm at 50 Hz -Shaft holder: Ø 30 mm -Price: per piece -Number: 1x available -Dimensions: 660/290/H185 mm -Weight: 61 kg

Contec Mini 15 - Concrete mixing plant Mixer M 500/300 liter Capacity 4 - 9 m3 Aggregate hoppers: 2 x 2.5 m3 on a stable metal frame Belts: 2 belts integrated and attached to the aggregate hoppers

CATALOG NUMBER 6059 TECHNICAL DATA - number of horizontal spindles 2 × 20 pieces - number of vertical spindles 1 × 20 pieces - spacing of extreme spindles 610mm - spacing between spindles 32mm - stroke of the feed cylinder 60mm - max. length of the workpiece: 3400 mm - adjustment of horizontal spindles up / down, front / back - right / left adjustment of vertical spindles - possibility of working on each drilling apparatus separately - right drill - left, threaded (screwed) - 3 pneumatic clamps - engine power 4 × 1.85 kW - air demand 6-8 bar - dimensions length / width / height 4600x1180x2200mm - weight about 1500 kg Net price: PLN 18 900 Net price: 4345 euros depending on the price, 4.35 euros (Prices may vary with higher fluctuations)

Inv. Num: 5302 Type: DL 10G Producer: Profika Generated: 2011 Parameters: Control system: FANUC 0iMATE-TD Maximum rotation length: 185 mm Max turning diameter: 170 mm Maximum spindle speed: 3500 rpm Lathe length: 1980 mm Lathe width: 1420 mm Weight: 2750 kg

Long belt grinding machine, roller spacing approx. 3000 mm

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 3 kW 1410 rpm at 50 Hz -Shaft holder: Ø 30 mm -Price: per piece -Number: 1x available -Dimensions: 660/280/H185 mm -Weight: 52 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 2.35/3.3 kW 1420/2850 rpm at 50 Hz -Shaft holder: Ø 30 mm -Dimensions: 665/290/H180 mm -Weight: 61 kg

beading machine, hand beading machine, flanging machine, seam closing machine, manual beading machine -max. sheet capacity: 1.0 mm -Projection: 200 mm -Tool holder: Ø 24 mm -Stop plate: adjustable -Dimensions: 750/700/H1500 mm -Weight: 120 kg

The laser WUXI CHEERON QY-LC1500-2540 FIBER was produced in 2020 by the brand Wuxi Cheeron Qingyuan Laser Technology Co. The machine is new, it was only included for a test run after the purchase. The machine uses an IPG Photonics (Germany) laser source. The 3-axis fiber optic laser cutter has a power of 1500 W and a large working area of ​​4000 x 2500 mm. The modern design of the laser guarantees many processing possibilities, thanks to the fact that it is equipped with two automatic sheet metal loading tables, a cutting chamber, a large LCD screen, and extensive equipment. Laser technical parameters: - two automatic feeding tables: 4000 x 2500 mm - cutting working surface: 4000 x 2500 mm - closed, illuminated cutting chamber, with strong gas extraction - HD cameras for viewing in the cutting chamber and external viewing of loading tables - a closed container with a control  ...

Threading machine, pipe thread cutter, thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter -for pipe size: max. 2 inches -Cutting jaws: 1/2-2 inches -Operating voltage: 380 volts -Weight: 100 kg

Table milling machine, table milling machine -Table milling machine: with rigid spindle -Speeds: rpm -Motor power: kW -Dimensions: 1000/1870/H1040 mm -Weight: 560 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 4.5 kW 4700 rpm at 80 Hz -Voltage: Y 400 volts -Shaft holder: Ø 32 mm -Tool -Dimensions: 645/235/H150 mm -Weight: 55 kg

This pharmaceutical grade bottle washing machine has been designed to meet the needs of the most demanding customers and to comply with international standards in order to provide high level performance along with easy access to components, all in a small footprint. This rotary washing system was developed and designed keeping in mind the high level of cleanliness required in the pharmaceutical industry. High washing and rinsing performance. Small footprint, size and utility consumption. The washing chamber is made entirely of stainless steel and is surrounded by a Plexiglass cover. Presence of an electrical panel for easy control management.

bundle sizes from 30 x 12 x 50mm up to 350 x 200 x 200mm (minimum individual carton size 15 x 12 x 50mm), output up to 50 bundles per minute. Includes infeed and outfeed conveyors.

Combined punching machine, hydraulic Hydraulic Ironworkers 4 kW 900 kg