measuring machine used for sale

Description: Partly with dial gauges , Approx. Onsite Dimension. (l x w x h): 300 x 300 x 300 mm, weight approx.: 20 kg

Description: Measuring range 5 to 17 mm and 10 to 35 mm Approx. Onsite Dimension. (l x w x h): 200 x 80 x 100 mm, weight approx.: ein kg

Description: Beatometer 2 pieces , Digital and analog dial gauges RIDGID SeeSnake micro inspection camera endoscope camera Laparoscopic telescope Approx. Onsite Dimension. (l x w x h): 300 x 300 x 400 mm, weight approx.: 30 kg

Description: Consisting of a digital caliper, a micrometer, two dial gauges, a digital dial gauge and an analog caliper Different manufacturers Approx. Onsite Dimension. (l x w x h): 500 x 450 x 60 mm, weight approx.: 7 kg

Description: Serial number: F04020640153 E(micrometer) 5 + 8L/1000 In case Important note: the robot arm is only delivered with the accessories and equipment as shown in the pictures Approx. Onsite Dimension. (l x w x h): 780 x 550 x 400 mm, weight approx.: 20 kg

: 6 Messuhren : nur : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Granite measuring plate type weight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 900 x 600 x 750 mm

Description: Grinding wheels, dial gauges, 1 compass Approx. Onsite Dimension. (l x w x h): 800 x 300 x 150 mm, weight approx.: 7 kg

Description: 3 pieces with accessories, partially incomplete Approx. Onsite Dimension. (l x w x h): 320 x 200 x 150 mm, weight approx.: 7 kg

Description: Measuring range: up to approx. 600 mm Approx. Onsite Dimension. (l x w x h): 400 x 200 x 850 mm, weight approx.: 30 kg

Transmitter for laser measuring system MARPOSS MIDA LASER ML75P 34T0443550 New ! Dimensions ( transmitter ): 140 x 50 x 70 mm

Inv. Num. : 7519 Type: IM-6225 Producer: KEYENCE Created: 2017 Parameters: Axis X: 100 mm Max. weight of the part: 2 kg Weight: 50 kg Measurement of measurements within 10 seconds

Description: It is a 3D coordinate measuring system from the XM series from Keyence consisting of: o Measuring head XM –T1000 (two measuring probes) o XM-1500 measuring system o Adhesive plate for XM series o AC power cable o Mouse and keyboard Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 60 kg

Description: Composed of 1 square, 1 Mhar gauge, 1 Micromaster micrometer, 1 LTF protractor Approx. Onsite Dimension. (l x w x h): 200 x 200 x 400 mm, weight approx.: 15 kg

Description: Lot consisting of 1 ATHORN magnetic base with SWISS TAST dial indicator 1 DDQ 50 pre-setting probe, for Z-axis calibration, 50 mm travel Approx. Onsite Dimension. (l x w x h): 300 x 300 x 250 mm, weight approx.: 5 kg

Set of test weights 1g - 5kg tolerance class M1 in wooden box with carrying handles Top-maintained condition

Description: consisting of swith plug gauges, taps and snap gauges Approx. Onsite Dimension. (l x w x h): 1,000 x 500 x 1,900 mm, weight approx.: 200 kg

Description: consisting of one stock of micrometers, dial gauges and internal measuring devices Approx. Onsite Dimension. (l x w x h): 1,000 x 500 x 1,900 mm, weight approx.: 200 kg

Description: consisting of: outside micrometers internal measuring equipment Approx. Onsite Dimension. (l x w x h): 1,000 x 800 x 100 mm, weight approx.: 30 kg

Description: Granite plate: 3.355 x 765 x 80 mm Approx. Onsite Dimension. (l x w x h): 3.440 x 920 x 970 mm, weight approx.: 4.000 kg

Key data: 3000 mm, 1560 mm, 575 mm

Used measuring plate from Stiefelmeier, only to self-collectors

Description: Serial number: 100080801 Calibration date: 16.05.2023 Recalibration date: 16.05.2024 Measuring range: up to 600 mm Approx. Onsite Dimension. (l x w x h): 500 x 400 x 1,000 mm, weight approx.: 70 kg

Description: serial number: 4C212049 Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,100 mm, weight approx.: 50 kg

Description: Measuring ranges length 300 mm, diameter 0.2 to 50 mm Includes computer, screen, keyboard and mouse Program unknown Approx. Onsite Dimension. (l x w x h): 700 x 700 x 950 mm, weight approx.: 120 kg

Description: Length approx. 1500 mm, accuracy level: Goods 00, equipped with metal handles on the left and right, packed in a wooden box Approx. Onsite Dimension. (l x w x h): 1,820 x 430 x 500 mm, weight approx.: 100 kg

Description: 2 narrow surfaces, 2818/1, length approx. 1000 mm Approx. Onsite Dimension. (l x w x h): 1,200 x 150 x 60 mm, weight approx.: 30 kg

Description: measuring range: X = 2,700 mm / Y = 1,250 mm / Z = 85 mm (other dimensions on request) resolution: 0.01 mm accuracy (tolerance): <, +/- 0.1 mm connected load: min. 2 sockets 230 Volt AC field of application incoming goods: quality inspection of delivered parts quality assurance: sample measurement directly on the production line production: for regular checking of machine settings before the start of production of a series process control (safety in production) reduction in set-up time through automatic feedback to the operator of the drilling spindles to be adjusted in the X, Y and Z directions. quality check before delivery - assembly & training by HECHT AG, possible by exclusive arrangement. - factory overhaul 2023 - 12 months warranty with max. 2-shift operation (not valid for spare and wear parts) Approx. Onsite Dimension. (l x w x h): 3,364 x 2 ...

Description: partly digital, different makes, measuring range 300 and 500 mm Approx. Onsite Dimension. (l x w x h): 500 x 200 x 200 mm, weight approx.: 3 kg

Description: predominantly MAHR/MITUTOYO, approx. 25 pieces, various measuring rods, further details on the measuring lengths: see photos of the nameplates Approx. Onsite Dimension. (l x w x h): 400 x 300 x 100 mm, weight approx.: 6 kg

Description: equipped with measuring rod and foam case Approx. Onsite Dimension. (l x w x h): 400 x 300 x 100 mm, weight approx.: 2 kg

Description: each equipped with a measuring rod Approx. Onsite Dimension. (l x w x h): 400 x 300 x 100 mm, weight approx.: 1 kg

Description: Equipped with various accessories and power supply, further details: see photos of nameplates Approx. Onsite Dimension. (l x w x h): 600 x 400 x 100 mm, weight approx.: 5 kg

Description: Equipped with test rod, made by Jehnoptik, various accessories, in a foam case Approx. Onsite Dimension. (l x w x h): 500 x 400 x 100 mm, weight approx.: 8 kg

Description: with range of accessories, further details: see photos of the nameplates Approx. Onsite Dimension. (l x w x h): 400 x 400 x 200 mm, weight approx.: 5 kg

Description: Equipped with test rod, made by Jehnoptik, various accessories, in a foam case Approx. Onsite Dimension. (l x w x h): 500 x 400 x 100 mm, weight approx.: 8 kg

Description: Equipped with various accessories, further details: see photos of the nameplates, packed in a foam case Approx. Onsite Dimension. (l x w x h): 500 x 400 x 100 mm, weight approx.: 2 kg

unknow A9020411 (12-14)-

Operator Panel

unknow GE.570205.0002.00, part of the set-

Main Rack

BARCO HULPFUNCTIE 16 DIG OUTP

BARCO FLOPamp;KBRD INTF MNC95

KRÜSI chalet construction machine / log cabin production system type CM 40 Manufacturer: Krüsi Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of construction: 1996 S/N 431 Condition: good, technically checked and cleaned / ready for use Machine description / equipped with: 1. Sawing unit: Hand feed Spindle adjustment with analogue dimension display 2. CM milling unit: Hydropneumatic feed Spindle adjustment with digital dimension display 3. Drilling unit: Hand feed Spindle adjustment with analogue dimension display 4. End milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Specifications Workpiece Cutting height max. 200nn Cutting width max. 250mm Working table height 900mm Sawing unit Saw blade Ø max. / bore ø 400 / 30 mmm Tungsten carbide equipped with chip depth limiter (synchronization)  ...

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...

Carrier bag machine / SOS block bottom bag machine with flat inside handle unit Bag width: 14-32cm Tube length: 35-70cm Bottom width: 6-20cm Reel width: 107cm max Hot Melt unit for handles Web guide system for handles Foto cell unit for preprinted paper Aprox 7 former plates Option: 4 colour tail end printer (ref. S294)

Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.

A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...

FORCIPOL - the quality grinding machine / polishing machine for metalography that is cheap on the market - from the simple grinding machine for manual preparation to the semi-automatic machine - The FORCIPOL series is modular and can be assembled as required FORCIPOL 102: Basic grinding machine / polishing machine with a grinding wheel 250 mm and basic control FORCIPOL 202: as before, but 2 grinding wheels 250 mm For rationalization and reproducible cuts (can be combined with FORCIPOL 102 or 202): FORCIMAT 52: Sample wineer head with simple control FORCIMAT 102: Sample winer head with programmable control For the supply of lubricants and suspensions (only IN the case of FORCIMAT 52 / 102) DOSIMAT 12 - Lubricant Dosing Device DOSIMAT 52 - Lubricant and suspension dispenser (adjust integrated internal control on the device) DOSIMAT 102 - Lubricant and suspension dispenser  ...

Copying fraes machine Kuhlmann Type GM 1-2 Machine in very good condition. Optional: very extensive access at an additional cost Zubehoer s/he/sheers, milling spindles, sub-machines for circular copying, written fonts, fraesstichel with quick-change device, copy spin, Radient template for radii in 0.5mm rising, clamping devices, Stencils and much more! Special price Tool cabinets milling spindle spindle grasses engraving fonts brass copper table