measuring machine used for sale

TABLE mm 2600 x 530 ROLLS min. ÷ max. mm 0.4 ÷ 3 STRIP FABRIC MAX MM 5 max. workpiece height min. ÷ max. mm 12 ÷ 50 min length or width processable plate mm 190/65 Speed m/min 7

Key data: 950 , 1 , 160

Ce execution V. 400/50 Electronic table positioning Automatic carpet centering Grinding width 950 mm Combi unit Table extension rear and front

Auction-ID: A1-48746-95

see photos for more details Auction-ID: A7-50677-128

for more details see photos of the nameplates Auction-ID: A7-50677-956

working width 410 mm chip removal 5 mm SPIRAL PLANER SHAFT XYLENT ELECTRIC SLIDING TABLE LIFT DIGITAL DISPLAY FOR THICK TABLE POSITION Suction nozzle diameter Ø 120 mm Air consumption 1000 m³/h

Key data: 1100 , 1 , 160

TECHNICAL DATA LIBRA 35 - 110 Usable working width 1100 mm min. and max. working height 4 ÷ 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Motor power 400 V 50 Hz 11 (15) kW (HP) 2 carpet feed speeds 4.5/9 m/min Feed motor 0.3/0.55 Combi unit TC with: - with ribbed steel roller ø 120 mm and decimal correction of grain/strip thickness - Hard sanding shoe (density 0.68) with graphite coating and decimal correction of grain/strip thickness - Switching the sanding shoe on and off from the control panel via pneumatic cylinders. Decimal setting position sanding shoe the grain size/strip thickness - AUTOMATIC CARPET CENTERING

MAZAK SUPER TURBO X48 MK II laser was built in 2001 in Japan. The compact laser cutting machine is designed for precise cutting of pre-programmed shapes in sheet metal made of structural steel, stainless steel and aluminium. The machine’s small dimensions and components integrated into the machine frame, such as the chip conveyor and the MAZATROL L32B CNC control, allow it to be used to its full potential both in small factories and in series production. The MAZAK ST-X 48 MKII gas cutting machine can process sheets with a maximum thickness of 15 mm (S235 structural steel), 6 mm (stainless steel) and 3 mm (aluminium). High cutting speed as well as excellent machining quality and accuracy over the entire working area at low operating costs are achieved thanks to the YB-L150A 8M resonator, characterised by high energy efficiency, allowing the laser beam power to be adjusted in the rang ...

see photos for more details Auction-ID: A7-50677-129

GeneralUniversal Milling Machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross520 mmVertical475 mmTechnical DataType of main driveAC Drive power (100% DC)16 kWDrive power (40% DC)21 kWSpeed range20 - 15000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgDirect measuring systemDirect path measuring system Spindle speed 15,000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 21 kW / 16 kW (28 hp / 21.5 hp) Torque 111 Nm / 85 Nm (82 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to +110 ...

Eberhardt MAXIMAT – Spiralknetmaschine für Bäckereien Hersteller: Eberhardt Backtechnik (Deutschland) Typ: Spiralknetmaschine Stromversorgung: 400 V Elektronische Steuerung Edelstahlwanne Gebrauchtgerät, komplett. Ideal für Bäckereien und Konditoreien.

1250 x 1250 with reposition 27 station with 3 index - Very good condition

4000 x 2000mm Laser: 4400w With Byloader

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-OT-6035 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable th ...

GeneralUniversal Milling Machine; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal650 mmCross520 mmVertical475 mmTechnical DataType of main driveAC Drive power (100% DC)25 kWDrive power (40% DC)35 kWSpeed range20 - 20000 rpmSpindle taperSK40 Tool holder DIN ISO 7388-1-A Clamping SystemDIN ISO 7388-3-A, AD Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgDirect measuring systemDirect path measuring system Spindle speed 20,000 rpmMotor spindle speedMASTER® SK 40 Spindle speed 20 - 20,000 min-1 At speed 18.000-20.000 min-1 SK40 – BIG-PLUS® stipulated Output 35 kW / 25 kW (47 hp / 33.5 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63.5 ft lbs) (40 / 100 % duty cycle) NC swivel rotary tableSwivel Rotary Table for simult ...

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS X with Siemens SINUMERIK ONE Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.14500 KgNC swivel rotary tableTable surface Ø650 mmCentre bore 32 mmMaximum load (table centre) 600 KgSlot width 14 mmNumber of Slots 9 Distance between T-Slots 63 mmRotation speed max.4. Axis 40 rpm4. Axes (swivelling range) 360 x 0,001 degree5. Axes (swivelling range) +/- 120 degreeRotation Speed 5. Axis 20 rpmIntegrated motor spindle speedMASTER ...

Dear customers, here we offer you a new high-precision disc grinding machine for sale. This is a Swiss precision machine. Here are some technical data: Grinding wheel: Ø900 mm Table dimensions: 450 x 1,200 mm Table extension: 300 mm Grinding wheel inclination: +/- 30° Motor power: 4.0 kW Speed: 600 min-1 Clockwise and counterclockwise rotation with visual display Voltage: 3 x 400 V, 50 Hz Suction nozzle: Ø150 mm with engine brake with machine lamp with digital angle display Weight: 460 kg Price plus VAT, which will be shown separately on the invoice. If you have any questions, please do not hesitate to contact us.

2 roller banding machine Hunkler LAM 600; good condition; cleaned and tested; Working width 600mm; Linen pool height adjustable; suitable for cold glue. Two rollers gluing machine Hunkeler LAM 600; good condition; cleaned and checked; working widht 600mm; glue reservoir adjustable in hight; used for cold glue.

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-CT-6022 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded cons ...

GeneralHorizontal universal machining center; Control: CELOS X with Siemens SINUMERIK ONE Working area 1Longitudinal650 mmCross700 mmVertical950 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minCabineFull protection cabin Taper cleaning brushesTaper cleaning unit with rotating brushes for spindle taper HSK Stop block + 3-point-supportStop block + 3-point-support Design according to DECKEL MAHO Standard Package Mill / Turn HSK-A 63Package Milling / Turning: Upgrade NC-swivel rotary table to Milling - Turning / direct drive Table plate C-axis d 680 mm / 26.8 in Speed C-axis max. 1.200 min-1 Integrated balancing sensor Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 m Kinematics axis A / C for swivel rotary tableAxis kinematics A/C for swivel rotary table Axis designation swivel axis: ...

GeneralCNC Turning Centre; Control: Control M730UM with CELOS CharacteristicsMax machining diameter356 mmMax. Turning Length705 mmSpindle bore111 mmBar diameter max.80 mmSpeed max.4000 rpmNumber of tool stations12 Rotary tool spindle speed10000 rpmMovements X / Z260/795 mmRapid feed X / Z30/30 m/minDrive power main spindle18,5/15 kWDimensions (L x W x H)3,35 x 2,11 x 2,2 (3,99 x 2,11 x 2,2) mWeight approx.6360 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p (Spindle 1) Standard spindle 18.5/18.5/15 kW, 4,000min-1(Spindle 1) Standard Spindle 18.5/18.5/15 kW, 4,000 min-1 Max. spindle speed: 4,000 min-1 Chuck size: 10 inch., 12 inch. (8 inch. also for the 2-a ...

GeneralCTX beta 1250 4A Two spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - counter spindle slide; Control: CELOS X with Siemens 840D SL Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range0-5000 rpmC-Axis Speed2000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmC-Axis Speed2000 rpmSlide 1Longitudina ...

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-C2 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded construct ...

General- partial hollow clamping device (hydraulic), - C-axis and spindle brake (hydr.) - upper compound slide with turning-/ milling spindle, with hydraulic locking reception HSK-A63, DIN 69893 - Y-axis ±210 mm - B-axis ±120º interpolating, Torque motor - tool magazine 36-fold disc magazine, ergonomic front load - absolute, direct measuring systems in X-, Y-, Z1-axis - cooling pump 6 bar;20 l/min, - USB-interface, Ethernet-interface; Control: CELOS X with Siemens 840D SL Operate Working areaSwing diameter over guide ways700 mmTurning diameter700 mmDistance between spindles3360 mmClamping chuck diameter max.630 mmBar diameter max.125 mmMain drive 1Drive power (100% DC)40 kWDrive power (40% DC)52 kWSpeed range- 2500 rpmTorque (100% DC)1700 NmMax. torque (40% DC)2200 NmC-Axis Speed2500 rpmTorque of C-Axis (holding torque)1700 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 698 ...

Type: Industrial Winder Fritsch CRH120/400 Cone Winder with inlet and outlet belt made of silicone fabric new winding tapes Band width: 400mm Version in stainless steel Machine is mobile Connection: 400V, 1kW, 16A CEE plug Condition: completely repaired and in good condition

For sale we offer a strapping machine Model TV02 of the manufacturer Schneider&Ozga. Condition very good, like new, never used. The fully automatic strapping machine TV 02 convinces with maintenance-free direct drives and Simplest operation. Strapping performance of 30 packages easy and 15 packets in parallel per minute Strapping width from 5 to 12 mm Different frame sizes Conveyor belts with four belts Strap closure off-center SPECIFICATIONS Achievement Up to 30 individual strappings/minute Up to 15 double strappings/minute Size of the packaged goods Width: max. 600 mm min. 160 mm Height: max. (without press) 650 mm (with press) 550 mm min. 10 mm Package weight 25 kg Strapping material Polypropylene tape (PP tape) Width:5 -12 mm Thickness: min.0.35 - 0.70 mm Type of closure Thermo welding closure Reel Core diameter: 200/228 mm Outer diameter: approx.  ...

This 3-axis Murata MW100 Horizontal Twin-Spindle CNC Turning Center was manufactured in 2012. It features a maximum spindle speed of 4,500 rpm and a tool capacity of 2 × 8 positions. With a compact design and included chip conveyor, this machine is ideal for efficient turning applications. If you are looking to get high-quality turning capabilities, consider the Murata MW100 machine we have for sale. Contact us for further details.

Cutting machine for rolls Wabäma complet in chrome steel Horizontal cutting machine Max cutting compound: Width: 135 mm Height: 50 mm with infeed and discharge conveyor New: Teflonized knife, conveyor belt Pressure belt and conveyor belt Mass: Length: 1900 mm Inlet height: 1000 mm Depth: 700 mm Connection: 380 V Condition: very good, Repaired

Centerless grinding machine manufactured in 2003. This KOYO 4515C features two available units, both equipped with FANUC LR Mate 200iD/7L loading robots and FANUC SR-6iA unloading robots. The first unit has 86,000 operating hours, while the second has 92,000 operating hours. If you are looking to get high-quality grinding capabilities, consider the KOYO 4515C machine we have for sale. Contact us for further details.

This 5-axis +GF+ AGIECHARMILLES CUT 400 Sp was manufactured in 2014. It features an impressive X/Y/Z axes travel of 800 mm x 550 mm x 510 mm and U/V axes travel for tapering of 800 mm x 550 mm. The machine can handle workpieces up to 1300 mm x 1000 mm and 3000 kg in weight. If you are looking to get high-quality wire EDM capabilities, consider the +GF+ AGIECHARMILLES CUT 400 Sp machine we have for sale. Contact us for further details.

This 5-axis +GF+ AGIECHARMILLES CUT 400 Sp was manufactured in 2017. It features a Wire Guide Set for Ø 0.250 mm and a Taper Tapering Kit for 45° taper cuts. If you are looking to get high-quality wire EDM capabilities, consider the +GF+ AGIECHARMILLES CUT 400 Sp machine we have for sale. Contact us for further details.

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-CT-6022 6kW / VF1530-6000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 6.0kW - Energy requirements: 30.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 25.0mm, maximum thickness 30.0mm - Stainless steel: Recommended thickness 16.0mm, maximum thickness 20.0mm - Aluminum: Recommended thickness 12.0mm, maximum thickness 14.0mm Structure parts The machine is very stable thanks to its welded construction based on massive leg ...

For sale we offer a strapping machine model TW01 of the manufacturer Schneider&Ozga. Condition very good, like new, never used. Strapping performance of 30 packages easy and 15 packets in parallel per minute Strapping width from 5 to 12 mm Different frame sizes Transport Rollers Specifications: Achievement Up to 30 individual strappings/minute Up to 15 double strappings/minute Size of the packaged goods Width: max. 600 mm max. (with side straps) 460 mm min. 160 mm Height: max. (without press) 500 mm max. (with press) 400 mm min. 30 mm Package weight 25 kg Strapping material Polypropylene tape (PP tape) Width:5 -12 mm Thickness: min.0.35 - 0.70 mm Type of closure Thermo welding closure Reel Core diameter: 200/228 mm Outer diameter: approx. 450 mm Width: 165-210 mm Electrics 230 V, 1 phase, 50 Hz Power consumption 1,1 kW at 230V Pneumatics Operating  ...

This 4-axis HUBER River 600 CNC was manufactured in 2017. It features a traverse of 600 x 400 mm in the X and Y directions, and a Z-axis travel of 300 mm. The machine accommodates electrode diameters ranging from 0.3 to 3.0 mm. If you are looking to get high-quality small hole drilling capabilities, consider the HUBER River 600 CNC die-sinking EDM machine we have for sale. Contact us for further details.

Stapling machine nail Multinak S

First commissioned: 2006 Control: Fidia C20 incl. handwheel X-axis: approx. 7,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,751 mm A-axis: + 125° / - 95° C-axis: ± 275° Clamping table Clamping surface: approx. 6,000 x 2,000 x 400 mm Head Spindle power: 20 kW Spindle speed: max. 20,000 min-1 Tool holder: HSK 63A Tool tensioning: hydraulic Drives Linear axes Feed speed X-, Y-, Z-axis: 65 m/min Axle acceleration X-, Y-, Z-axis: 5 m/s2 Connection data Connected load: approx. 150 KW Dimensions, weights Space required Machine with protective cabin Dimensions: approx. 12,200 x 6,300 x 5,800 mm Total weight: approx. 105,000 kg Auxiliary - 20-fold tool changer - Engine room surveillance (camera) Options at extra cost: - Renishaw RMP60 probe - Fidia HMS System Condition of the machine Fully functional, very good condition

Table length 1480 MM Table width 600 MM Table height adjustment stroke 600 MM Engine 2 hp – 1.5 KW Band length Max Min 3950 MM-3800 MM Bandwidth 100 MM Belt speed 24 m/sec Weight CA 250 KG Space requirement 180 X 100 X h 170 cm CE version

The machine is available in stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-C2 4kW IPG / VF1530-4000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 4.0kW - Source brand: IPG - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 22.0mm, maximum thickness 25.0mm - Stainless steel: Recommended thickness 10.0mm, maximum thickness 12.0mm - Aluminum: Recommended thickness 8.0mm, maximum thickness 10.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by ...

Specifications: Tube outer diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W Feed module AVM 0.1 - 2.3 rpm incl. feeding unit and auxiliary unit used, in good condition.

DIEDESHEIM vertical lathe Vertifront 120-12 CNC. Electrics and geometry overhauled in 2007 for approx. 290.000,00 €! Former machine of the company Hoesch Rothe Erde Lippstadt, permanently maintained and maintained. Equipped with two turret supports (5-fold), protective hoods against emulsion vapors, housing see pictures, CE compliant. Details: Type 120-12 CNC Machine number L738 Year of construction 1983 Refurbished 2007 Space requirement approx. 20 sqm Weight approx. 20 to Power consumption approx. 110 kW Headstock Main spindle bearingsØ axial 500 mm radial 240 mm Cross Slide Unit Vertical slide stroke 800 mm (Z-axis) Paddling slide stroke 1,000 mm (X-axis) Basic hydraulics complete, system RING 2x2 axis CNC path control SIEMENS Sinumerik 3 TT Optional accessory 6-fold face plate clamping ideal for thin-walled workpieces ...

Optical measurement machine manufactured in 2016. This DMG MORI VIO Basic features a measuring range of 500 mm in the Z-axis and a diameter measuring range of 420 mm. It has a maximum tool weight capacity of 160 kg. If you are looking to get high-quality optical measurement capabilities, consider the DMG MORI VIO Basic machine we have for sale. Contact us for further details.

As good as new hand groove device / creasing device, working width 355mm

Multipli with pheumatic bow feeder , compresser, double sheet control , 2 pockets

Used dough weigher RHEON, type: KN-125 with belt scale and rotary table -Refurbished- - for single or double-filled products, such as coloured cookies, sweets or other pasta - all possible forms (see photo) - 100 recipes can be stored - in stainless steel and food sterile - with belt scale from OSC - optional double filling unit - Condition: very good, as new, completely overhauled - 6 months warranty Specifications: - Weight range: 10 - 90 g - Product length: no limit - Output: 1,200 - 6,000 pcs./h (depending on product) - Weight performance: max. 180 kg/h - Machine dimensions: 1,516 x 874 x 1,360 mm Visits and test runs are possible by arrangement.

From September 2022 immediately available newly overhauled Multigrind HT retrofit machine prepared for resharpening hobs / worm gear cutters / pushers and cutting rotor Control: Siemens 840 D X - axis 650 mm Y - axis 400 mm Z - axis 280 mm A - axis (dividing apparatus) 360 ° SK50 C - axis (rotary table) 270 ° X3 - axle with tailstock Grinding spindle: HSK50 Dressing unit Tool changer: 10-fold magazine plate Coolant system: Turbo Separator Suction: LTA Extinguishing system Other accessories: Available ex works Software: Customer-specific delivery Financing / hire purchase possible.

Boyens Jelly compact glaze sprayer Serial: 1500112073 2012, Digital temp adjustment, manual adjustable spraying pressure, short warm up time, twin spray guns, 3.5Kw, mobile, 1Ph

Boyens Jelly compact glaze sprayer Digital temp adjustment, manual adjustable spraying pressure, short warm up time, twin spray guns, 3.5Kw, mobile, 1Ph

This 3-axis DYE RHE -3000 Bed Type Milling Machine was manufactured in 2009. It features a substantial table surface of 1000 × 3000 mm, with longitudinal travel of 3000 mm and transverse travel of 1500 mm. The machine is equipped with a grinding wheel diameter of 450 × 80 mm and a spindle speed of 1450 rpm. If you are looking to get high-quality milling capabilities, consider the DYE RHE -3000 machine we have for sale. Contact us for further details.

Fiber Laser Machines With working ranges from 3050 mm x 1545mm to 6050mm x 2550mm and TRUMPF TruFiber laser power from 3000W to 12000W For more details please visit Cutform Machines via this link www.cutform.co.uk

Pressbrake Bending Machines With Bending Lengths from 2050 mm to 4100 and Bending Force from 600KN to 3200KN For more details please visit CutForm Machines via this link www.cutform.co.uk