128,849 used machines on RESALE, but how to find them? Machine Search
LINEAR JAR FILLER FOR SEAFOOD, LEGUME AND OTHERS, MECALSA TYPE: MC- MDP Technical description: Material: Stainless steel Aisi 304 Power supply: 380/400 V - 50/60Hz Formats: Round or other forms
APV Screw Compressor 3 Screw compressors Control Panel, Fridge watch 2100 system DX system Last run on 404a Last used to run a Spiral Freezer 33 Kw each, Total = 99Kw Max Model: HS2116 Built 1994 Complete with Searle Condensor (4 fan) Model: MDR 110-12 Serial: 961246 Physical dims: 5.1m x 1.16m x 0.7m (h)
A Händle twin-shaft screen filter mixer with hydraulically adjustable screen, which was overhauled in 2020, is available. Gearbox: ZHP 5.32/1168848, oil type: CLP PAO 320, gearbox weight: approx. 1000kg, mixing trough width: 1000mm, trough and cylinder length: 1150mm+850mm, mixer shaft speed: 12U-30rpm, theoretical wet material throughput capacity: approx. 39t-99t, theoretical compact material volume throughput: 22m³-56m³/h. The gearbox, mixer shafts and screening device were overhauled in 2020. Including mixer screws and screens. Documentation available. On-site inspection is possible.
A Mitsuboshi Diamond Industrial CNC glass cutting machine is available. Glass thickness range straight: 0.4mm-1.1mm, glass thickness range curve: 0.8mm-2.2mm, cutting range X/Y: 500mm/500mm, cutting speed: 500mm/s, cutting accuracy straight: +/-40µm, cutting accuracy curves (depending on radius): +/-100µm. Machine dimensions X/Y/Z: approx. 1100mm/1900mm/1600mm, weight: approx. 1000kg. Documentation available. On-site inspection is possible.
Riedex MD280 Clean Air Extraction Brand: Riedex Type: MD280 Year of construction: Series No: Length (mm) 2,300 mm Width (m m) 1700 - 1000 mm Height (m m) 3,300 mm Suction support diameter Ø 300mm Capacity: 6,000 m³/h Pressure (Pa) 1,750 Pa Connected value: 6.0 kW, 400 V Nominal Straw: 16 A Filter surface: 46.0 m² Filter material: H2, Nadelvilz 500 gram, BIA-tested (,0.1 mg/m3) Dust container: 500 Ltr - 4 ton Noise: 68 dB (A) Cleaning: automatic vibrating motor cleaning
High performance ultrasonic banderoling machine, arch size 700 X 750 mm, 30 mm band wideness. The US-2000 AST-MDM enables high perfomance. With the dynamic high-speed band feeding and the withdrawal by a brushless motor, the machine processes up to 30 bandings/min. Thanks to the packet height detection, the product memory and the band cen- tering, the banding happens very gentle and on the exact position. Postal packages can thus be banded very tight and without dama- ging the edges. The AST aggregate operates wear-free. Checked and serviced.
High performance ultrasonic banderoling machine, arch size 700 X 750 mm, 30 mm band wideness. The US-2000 AST-MDM enables high perfomance. With the dynamic high-speed band feeding and the withdrawal by a brushless motor, the machine processes up to 30 bandings/min. Thanks to the packet height detection, the product memory and the band cen- tering, the banding happens very gentle and on the exact position. Postal packages can thus be banded very tight and without dama- ging the edges. The AST aggregate operates wear-free. Checked and serviced.
Automatic wheel balancer, coolant filter, ruler and grinding and grinding wheel | automatical wheel balacer, coolant filter, blade and blade support grinding wheel, Ø grinding wheel dimensions (od x id x width): Ø610 x Ø304.8 x 355 mm, Ø min / max to grinding: 2/150 mm, Regulating wheel width: 355 mm, Regulating wheel speed nº: infinite, Min / max regulating wheel speed (r.p.m.): 20/460 r.p.m., Dressing (auto / manual): Automatic - CNC, Lubrication (auto / manual): Automatic, Control type ((cnc / manual): CNC, Cnc brand: FANUC, Cnc model: Oi Mate - TD, Infeed (auto / manual): Automatic / Automatic, Regulating wheel dimensions (od x id x width): Ø350 x Ø203.2 x355 mm, Grinding wheel width: 355 mm, Maximum infeed grinding length: 355 mm, Coolant system motor power: 0.70 Kw., Motor power grinding wheelhead: 37 Kw., Total power: 45 Kw., Voltage: 220/380 Kw., Long: 1.165 mm, Width: 3.3 ...
spindle diameter: 205 mm x-travel: 10000 mm y-travel: 2500 mm w-axis: 500 mm spindle travel: 1250 mm Control: Heidenhain type: TNC 355 spindle taper ISO: 50 transmission ratio: 2 feed - independent: 0-3000 mm spindle motor: 37 kW total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: 14,1x3,2x5,6 m optionally with plate field The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to you ...
Ø grinding wheel dimensions (od x id x width): Ø610 x Ø304.8 x 254 mm, Ø min / max to grinding: 1.5 / 125 mm, Regulating wheel width: 254 mm, Regulating wheel speed nº: infinite, Diamond dressing speed: 225 min1, Infeed (auto / manual): 254 mm, Regulating wheel dimensions (od x id x width): Ø355 x Ø203.2 x 254 mm, Grinding wheel width: 254 mm, Maximum infeed grinding length: 254 mm, Motor power grinding wheelhead: 30 kW, Power hydraulic motor: 0,37 kW, Long: 5.175 mm, Width: 2.950 mm, Weight: 8.375 kg
Hydraulic self-centering steady rest, luenette, Lynette SMW AUTOBLOKHydraulic steady rest with hydrostatic bearingSuitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 NSpanning range: 8 to 70 mmOperating pressure: approx. 60 barBezel foot: 245 x 240 mmDesign: fixed- 3 pieces roller bearing 35 mm- Roller width 18 mm- hydraulically self-centeringDimensions L x W x H: 350 x 250 x 550 mmWeight: 65 kgGood condition; used
Key data: 3 mm, 3000 mm, 130 m/min
One used Ravni starigtening and cutting machine for 3.0 to 8.0mm wire. Cutting length: 3.000mm Machine is equipped with double pay off for 3 t spools and dust abstructor Year: 2014
x-travel: 1500 mm y-travel: 800 mm z-travel: 600 mm total power requirement: kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: 2,66 x 1,60 x 3,10 m CNC-controlled Coordinate Measuring Machine for fully automatic measuring of workpieces. Incl. Measuring Software MDM Metrosoft Level 2 for measuring of: - Points, surfaces, circles, cylinders, cones, distances and angles. - SPC software for statistic evaluation of the measurements Machine not operational! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 170 x 170 mm capacity 60 degrees: round: 180 mm turning speed range:: 40 / 80 m/min dimensions of saw-band: 3650 x 27 x 0,9 mm engine output: 1,5 / 1,8 kW Control: weight: 670 kg Equipment: - robust electro-hydraulic semi-automatic band saw (INDUSTRY) - with miter cuts from 45° right to 60° left Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions front right, rotatable - optional manual or automatic lowering of the saw bow stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including dig ...
cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm capacity 45 degrees: flat: 220 x 200 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 140 x 100 mm capacity 60 degrees: square: 100 x 100 mm capacity 60 degrees: round: 150 mm vice: 285 mm turning speed range:: 36/72 m/min dimensions of saw-band: 2950 x 27 x 0,9 mm Control: total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 460 kg dimensions of the machine ca.: 1150 x 1970 mm Equipment: - robust electro-hydraulic semi-automatic band saw (INDUSTRY) - with miter cuts from 45° right to 60° left Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions front right, rotatable - optional manual or automatic lowering of the saw bow stepless adjustment of the saw bow lowering - ...
cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 170 mm height of material-table: 600 mm Pitch min/max: 50.000 mm vice: 335 mm Öffnung band speed: 15 - 100 m/min automatic feeds: 600 mm dimensions of saw-band: 3650 x 27 x 0,9 mm total power requirement: 2,2 kW weight: 1.105 kg Control: range L-W-H: 3,3 x 2,83 x 2,23 m electro-hydraulic band saw fully automatic, with additional : semi-automatic semi-automatic-dynamic manual .. operation Description: - robust electro-hydraulic band saw fully automatic (INDUSTRY) MEP - WINDOWS numerical control unit User interface with 7” touch screen display mechanical buttons for the sawing machine’s operating functions guarantees reliable opera ...
cutting range: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: square: 250 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 180 mm automatic feeds: 9999,9 mm feed: minimum 2 mm cutting diameter: minimum 5 mm band speed: 15 - 100 m/min vice: 340 mm Öffnung dimensions of saw-band: 3650 x 27 x 0,9 mm Control: total power requirement: 2,2 kW weight: 1240 kg range L-W-H: 1800 x 1900 x 1750 mm Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS CE” based MEP 50 – control and 7” touch screen display simple and quick setting of all machine parameters with additional soft keys + backlit disp ...
cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 200 mm capacity 90 degrees: square: 230 x 230 mm capacity 45 degrees: round: 190 mm capacity 45 degrees: flat: 180 x 180 mm capacity 45 degrees: square: 180 x 180 mm capacity 60 degrees: flat: 110 x 110 mm capacity 60 degrees: square: 110 x 110 mm capacity 60 degrees: round: 120 mm vice: 285 mm turning speed range:: 36 / 72 m/min saw band length: 2.950 x 27 x 0,9 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 370 kg. dimensions of the machine ca.: 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) - one-sided miter cut up to 60° - automatic saw bow lowering with continuously adjustable feed limit switch at the end of the cut - manual cutting function selectable - 2x saw band speeds - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - co ...
cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: flat: 220 x 200 mm capacity 45 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 140 x 100 mm capacity 60 degrees: square: 100 x 100 mm capacity 60 degrees: round: 110 mm vice: 285 mm turning speed range:: 36/72 m/min saw band length: 2.950 x 27 x 0,9 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 440 kg. dimensions of the machine ca.: 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table for miter cuts from 45° right to 60° left - automatic saw bow lowering with continuously adjustable feed limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - movi ...
A Morlock single-color pad printing machine is available. Ink system: cup system, oval print image diameter range: 100mm-250mm, min. cliché print image dimensions X/Y: 100mm/210mm, max. cliché print image dimensions X/Y: 250mm/280mm, ink cup diameter: approx. 80mm, pressing force range: 1100N-1500N, max. cycle rate: 1400-1800 cycles/h, machine dimensions X/Y/Z: approx. 1050mm/500mm/650mm, weight: approx. 250kg, control: Siemens. Documentation available. An on-site inspection is possible.
JUARISTI MDR 205 - CNC Plate Boring Mill Year of construction : 1992 Electrical & Electronics Overhaul : 2024 Spindle : 205 mm ( Ø ) ISO 50 X : 8,000 mm Y : 3,000 mm W : 1,250 mm ( spindle ) Z : 500 mm (tower) Z1 : 2,000 mm (table) CNC turntable : 3,000 x 2000 mm – 30 T Spindle speed : 900 rpm Spindle motor : 34 kW Total power : 74 kW Machine weight : 100 T (approx.) Control : FAGOR 8055 Angular Translation Head Base plate : 2,060 mm x 3,210mm (3 pieces) Conveyor
8-fold roller mill BÜHLER MDDL 250 x 1000 mm B1/B2 - C1A/C2, 1 x grain feed (shaft/corrugation), 1x semolina feed, Knife scraper, gearbox converted to belt Original Bühler retrofit Feed drive B1 converted to geared motor Hand switch converted to solenoid valve Inlet and outlet divided Good condition!
A Weiler precision lathe, overhauled by Mammut in 2004, is available. Center height: 125mm, max. swing over bed/cross slide: 260mm/140mm, distance between centers: 500mm, spindle bore: 28mm, clamping range: 1mm-26mm, drilling diameter: 22mm, cutting edge height: 22mm, tailstock quill diameter: 80mm, tailstock quill travel: 80mm, tailstock offset: 450mm. Documentation available. An on-site inspection is possible.
Engine Brand: VOLVO PENTA, Condition: USED, Nominal Rpm @ Nominal Power: 1500 Rpm, Engine Cooling Type: External Exchanger (eg. Keel Cooled) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , Starter Voltage: 24 Volt , Rated Power: 260 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/volvo-penta-tamd122a-used/ 42356, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.100 kg, Type number: TAMD122A
A Moving Die Rheometer Alpha for rheological testing and vulcanization analysis of rubber compounds is available. Test standards: ASTM D5289/ISO6502, max. temperature: 200°C, frequency: 1667Hz, strain: 0.2°/0.5°, test pressure: 8000kPa. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Without software. Documentation available. An on-site inspection is possible.
The new Hans Schreiner infinitely variable turning lathe with leading spindle and feed rod and cross feed. Hardened and cut bed and gear wheels. Main spindle, tapered roller bearings and v-ledges. Camlock mount C4, top slide ratatable by 360°, tailstock adjustment +/- 5 mm for taper turning. Good metal-cutting performance, infinitely variable speed via electronic speed control with digital speed indicator. Incl. three-jaw chuck 160 mm and steady rest. Technical data: Center height 140mm Distance between centers 650 mm max. turning diameter 289 mm Spindle bore 38 mm Spindle cone MK 5 Clamping cone tailstock MK 3 Spindle speeds 50 - 1125 RPM and 100 to 2250 RPM Speeds 2 Main motor power 1,5 kW S6 Voltage 230 Volt Weight 230 kg Standard equipment: 3-jaw chuck 160 mm with changeable jaws for internal turning center point Optional equipment: 2 axis digita ...
Wölfer 90 kw Model: MDRKZF 280M-6/7 (SFB100/130FU) Serial No.: 492560 Type: 3~ AC Motor Year: 2014 Voltage: 0-690/690 V Current: 94/90 A Frequency: 0-50/150 Hz Speed: 0-986/2958 rpm Duty type: S3 – 100 % Power factor (cos φ): 0.85 / 0.91 Protection class: IP 56 Insulation class: F Mounting type: IM B3 (foot-mounted) Ambient temperature: – 25 °C to + 45 °C Brake: SFB100/130FU – 110 V DC Encoder: POG 10 N / 1024 ppr / T1000 Heater: 230 V – 200 W Standard: EN 60034 Weight: 910 kg Brand-new, never-used electric motor. Suitable for standard applications as well as port
Model: wölfer 250bkw MDRKF 315X-4 SFB160FUT Serial No.: 192558 Type: 3-phase AC Motor Year: 2014 Voltage: 0-690 V / 690 Y Power: 250 kW Frequency: 50 / 100 Hz Speed: 0-1492 / 2983 rpm Current: 240 / 233 A Power factor (cos φ): 0.91 / 0.94 Duty type: S3 – 100 % Protection class: IP 56 Insulation class: F Mounting: IM B3 (foot-mounted) Ambient temperature: – 25 °C to + 45 °C Brake: SFB160FU – 110 V DC Encoder: POG 10 N / 1024 ppr / T1000 Heater: 230 V – 200 W Weight: 1650 kg Standard: EN 60034 Brand-new, never-used electric motor. Suitable for standard applications as well as port operations.
Model: wölfer 175 kw MDRKF 315L-4 SFB160FUT Serial No.: 192557 Type: 3-phase AC Motor Year: 2014 Voltage: 690 V / 690 Y Power: 175 kW / 175 kW Frequency: 50 / 100 Hz Current: 170 / 145 A Speed: 1486 / 2973 rpm Power factor (cos φ): 0.92 / 0.95 Duty type: S3 – 100 % Protection class: IP 56 Insulation class: F Mounting: IM B5 (flange-mounted) Ambient temperature: – 25 °C to + 45 °C Blower: 380 V 50 Hz / 440 V 60 Hz Brake: SFB160FU – 110 V DC Encoder: POG 10 N 1024 ppr / T1000 Heater: 230 V – 200 W Standard: EN 60034 Weight: 1380 kg Brand-new, never-used electric motor. Suitable for standard applications as well as port operations.
Precision full gear, lead, pull, shift spindle lathe, bed and gear gears hardened and ground. Main spindle, tapered roller bearings and wedge bars plan/upper slide can be adjusted. Camlock mount C5, upper slide 360 rotatable. Tailstock adjustment +/- 5 mm for taper turning,High clamping capacity, DIN acceptance protocol, operating and spare parts list.Dial rings metricWith 3-axis Sino digital display and removable bedStandard equipment:Sino 3-axis digital displayTool Quick-change holder E
Hans Schreiner Metal LatheSuperut 1500 DigitalTechnical data:Center height 250 mm, center width 1500 mm, max. turning diameter 500 mm, spindle mount Camlock 8, hollow spindle 80 mm, tailstock cone MK5, spindle speed 24 to 1600 rpm, speeds 15, main motor output power 7.5 kW, max. diameter over face slide 300 mm, max. turning diameter i.d. bridge 630 mm, longitudinal feed 0.07 - 4 mm/revolution, transverse feed 0.02 - 1.35 mm/revolution, metr. Thread 0.5 - 28 mm pitch, inch thread 56 - 1 gears/inch, module thread module 0.5 - 3.5, thread diametrically pitch 56 - 8,
Exhibition machine! Standard equipment: SDS2-3L Sino 3-axis digital display. Base frame, halogen lamp, jaw American 160 mm, 4-jaw American 160 mm, face plate 250mm, 2 steady restsTechnical data:Tip height 160 mm, center width 900 mm, max. turning diameter 460 mm, spindle bore 38 mm, spindle cone MK5, spindle speed 65 to 1810 rpm, speeds 18, main motor output power 2 Kw S6 ( 1.5 Kw S1), weight 510 kgSymbol photoPrices subject to change, errors, printing and typesetting errors excepted
Belt loader, coolant filter, wheel changing equipment, grinding and drag rules and grub screws, Grinding wheel dimensions (od x id x width): 610 x 355 x 304,8 mm, Ø min / max to grind: 2/150 mm, Regulating wheel speed nº: infinite, Min/max speed of regulating wheel (r.p.m.): 10/225 r.p.m., Dressing (auto / manual): Automatic - CNC, Lubrication (auto / manual): Automatic, Control type (CNC/manual): CNC, CNC brand: FANUC, CNC model: Oi TD, Dive (auto/manual): Automatic , Dimensions of the regulating wheel (OD x ID x W): Ø350 x Ø203,2 x 355 mm, Infeed (auto / manual): Automatic, Regulating wheel dimensions (od x id x width): Ø350 x Ø203.2 x 177.5 mm, Maximum infeed grinding length: 355 mm, Motor power cooling: 0,70 Kw, Coolant system motor power: 0,70 Kw, Grinding wheel head motor power: 37 Kw, Total power: 45 Kw, Voltage: 220/380Kw, Long: 1.165 mm, Width: 3.398 mm, High: 1.700 mm, W ...
General SKU357X1337 LocationBarneveld MakeBuss Main Features Motor21.5 KW Inlet diameter50 mm L/D15 Specified Features - Mixing extruder Single screw mixing extrudercheck Screw dia.46mm L/D15 With heating zones3 DC-motor0,710-21,5 kW, 380 volt, 50-1520 rpm Screw speed300 rpm InletDia. 50 mm Feeding with hoppercheck Max. temperature250 MaterialStainless steel Information TypeMDK 46B Mach.No.87/652482 Year of construction1987 Mounted on framecheck Floorspace2,70x0,55 m Total height1,90 m Weight1000 kg Extra SpecificationsWith 2-roll cylinder, roll diameter 150mm, roll length 400mm, 0:55 kW, 220/380 volt, 1400 rpm, roll speed 3,6-18 rpmMixing extrudersBussExtruders > Mixing extrudersBrand > Buss What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are wel ...
General SKU390X1006 LocationBarneveld CEcheck MakeBrabender Main Features MaterialStainless steel Motor0.37 KW Inlet diameter150 mm Specified Features - Metering screw MaterialStainless steel Metering screws Metering screwcheck Screw diameter50 mm Screw length450 mm With hoppercheck Capacity± 44,55 Ltr. Hopper sizestrapezium: a: 400 mm, b: 260 mm, h: 300 mm: H: 450 mm Inletø 150 mm Outletø 50 mm With motor0,37 kW, 380 volt, 1380 rpm Screw speed96 rpm Information TypeFW40/0 plus-50 & DDW-MD2-DDSR20-5 No.0903048.2104 0903048.2105 Year of construction2010 With switchgearcheck as is With switchgearcheck as is (E-scheme available) Extra SpecificationsWith: Sitecon, vibro hopper filter Busch, blower, 3 kW, 500 volt, 2x Brabender, dosing screw, type DDW-MD2-DDSR20-5: :motor: :0,18kW: feed rate 0,25 — 1 kg/h:Metering screwsBrabenderDosing units > Metering s ...
General SKU390X1015 LocationBarneveld CEcheck MakeBrabender Main Features MaterialStainless steel Motor0.37 KW Inlet diameter150 mm Specified Features - Metering screw MaterialStainless steel Metering screws Metering screwcheck Screw diameter50 mm Screw length450 mm With hoppercheck Capacity± 44,55 Ltr. Hopper sizestrapezium: a: 400 mm, b: 260 mm, h: 300 mm: H: 450 mm Inletø 150 mm Outletø 50 mm With motor0,37 kW, 380 volt, 1380 rpm Screw speed96 rpm Information TypeFW40/0 plus-50 & DDW-MD2-DDSR20-5 No.1201737.1209 1201737.1223 With switchgearcheck as is (E-scheme available) Extra SpecificationsWith: Sitecon, vibro hopper filter, Busch, blower, 3 kW, 500 volt, 3x Brabender, dosing screw, type DDW-MD2-DDSR20-5: :motor: :0,18kW: feed rate 105-400 g/h and 240-680 g/h: outlet: ø 55 mmMetering screwsBrabenderDosing units > Metering screwsBrand > Brabender W ...
General SKU390X988 LocationBarneveld CEcheck MakeBrabender Main Features MaterialStainless steel Motor0.37 KW Inlet diameter150 mm Specified Features - Metering screw MaterialStainless steel Metering screws Metering screwcheck Screw diameter50 mm Screw length450 mm With hoppercheck Capacity± 44,55 Ltr. Hopper sizestrapezium: a: 400 mm, b: 260 mm, h: 300 mm: H: 450 mm Inletø 150 mm Outletø 50 mm With motor0,37 kW, 380 volt, 1380 rpm Screw speed96 rpm Information TypeFW40/0 plus-50 & DDW-MD2-DDSR20-5 No.1201737.1218 With switchgearcheck as is (E-scheme available) Extra SpecificationsWith: Sitecon, vibro hopper filter, type Jet2-250/DN100, Busch, blower, 3 kW, 500 volt, 2x Brabender, dosing screw, type DDW-MD2-DDSR20-5: motor: :0,18kW: feed rate 240-680 g/h: hoper: 150x110x270 mm — 4,5 l.: inlet: ø 95 mm: outlet: ø 55 mmMetering screwsBrabenderDosing un ...
General SKU308M548 MakeBrabender Technologie TypeDDW-MD5-FW40/3plus-35 No.03035306893 Year of construction2004 Mounted on framecheck Main Features MaterialStainless steel Motor0.55 KW Specified Features - Metering screw MaterialStainless steel Metering screws Metering screwcheck With hopper(valbuis) Hopper sizesdia. 700mm to dia. 190mm, height 1,8m Inletdia. 200mm Outletdia. 150mm With motor0,55kW 230/400 Volt Information LocationBarneveld Floorspace1,4x0,8m Total height2,3m Weight350kg Technical specs Extra informationhopper dia. 700mm to dia. 190mm, height 1,8mMetering screwsBrabenderDosing units > Metering screwsBrand > Brabender What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Plea ...
General SKU308M560 MakeBrabender Technologie TypeDDW-MD5-FW40/3plus-35 No.03035305896 Year of construction2004 Mounted on framecheck Main Features MaterialStainless steel Motor0.55 KW Specified Features - Metering screw Metering screwcheck With hopper(valbuis) Hopper sizesdia. 700mm to dia. 190mm, height 1,8m Inletdia. 200mm Outletdia. 150mm With motor0,55kW Metering screws MaterialStainless steel Information LocationBarneveld Floorspace1,4x0,8m Total height2,3m Weight350kg Technical specs Extra informationhopper dia. 700mm to dia. 190mm, height 1,8mMetering screwsBrabenderDosing units > Metering screwsBrand > Brabender What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us i ...
Lenze Type G50BB111MHBR2C MDEMAXX063-42C0C 3 chamfer 400 volt (50 tot 87 Hz ) 0.25 kW / 0.45 kW ( 87 Hz ) 22.44 RPM to 40.6 RPM Hole 25 mm Shaft 30 mm Drive Unit type: E84DGDVB55142PS L 45cm W 20cm H 20cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)
LENZE MDEMA1M071-42 3 chamfer 400 volts 0.55 KW 7.8 RPM Hole 40 mm L 45cm W 35cm H 20cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)
General SKU357X1336 LocationBarneveld MakeBuss AG Main Features Motor49 KW Inlet diameter79 mm L/D17 Specified Features - Mixing extruder MaterialStainless steel 1.4000 (410S) Single screw mixing extrudercheck Screw dia.69,8 mm L/D17 With heating zonescheck 3x Electric heatingcheck With jacketcheck DC-motor49 kW 460 V 2710 rpm Screw speed300 rpm Inletø 79 mm Feeding with hoppercheck Buss ELS 70 Feeding with metering screwcheck 63 rpm Information TypeMDK70-17D Mach.No.942500 Year of construction1988 Floorspace2 x 0,85 m Total height1,8 m Extra SpecificationsWith 3x temperature control units: Heating medium: thermal oil, electrically heated Max. temp.: 300 °CMixing extrudersNew arrivalsBussExtruders > Mixing extrudersNew arrivalsBrand > Buss What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for ...
Deck oven WP Matador MD101C52 - Manufacturer: Werner & Pfleiderer - Type: Matador MD101C52 - Deck oven with gas burner - 5 shelves each 120cm wide and 160cm deep - 3 Pull-out stoves - With exhaust hood - Combitherm Technical data: - 79 kW - 3N 400 V 50Hz 12A - Year of construction: 10/ 2014
Operating unit, control panel, control panel, operating unit, keyboard, screen, control, handheld terminal, operating element -Manufacturer: Cyclus Battenfeld, operating unit from injection molding machine BA-T2400 / BA 600 CDC / A5002 03 1 04 -Type: MDE-BDE -Number: 3x control unit available -Price: per piece -Dimensions: 290/50/190 mm -Weight: 0.8 kg/pc.
Servo motor, gear motor, electric motor, three-phase motor -Manufacturer: Motor Lenze type MDFKARS080-22 -Manufacturer: Lenze gearbox type GST06-2A VCR 080C22 -Voltage: 390 V -Power: 3.9 kW -Speed: 197.4 rpm -Shaft: Ø 30 x 60 mm -Construction: B14 -Protection class: IP54 -with: Lenze fan type 4656EZ -Dimensions: 620/200/H210 mm -Weight: 35 kg
Servo motor, geared motor, electric motor, three-phase motor -Handover in its current state as shown in the pictures -Cable connection is loose -Manufacturer Motor Lenze Type: MDFKARS080-22 -Manufacturer of gearbox: Lenze, type: GST07-2NVCK2E -Power: 3.9 kW -Speed: 70 rpm -Shaft: Ø 40 mm -Design: B5 -Protection class: IP 55 -Number: 1x motor available -Dimensions: 720/200/H245 mm -Weight: 53 kg
Gear motor, electric motor, three-phase motor -Manufacturer gearbox Lenze type: GST04-1MVBR071-31 -Manufacturer motor Lenze type: MDXMA42M071-31 -Power: 0.25 kW -Speed: 825 rpm -Shaft: Ø 20 mm -Construction: B3 -Protection class: IP 55 -Brake -Number: 3x motors available -Price: per piece -Dimensions: 430/205/H150 mm -Weight: 14.3 kg
maximum number of results exceeded
please refine your search
