md used for sale

Repair service Reparatur Service Part: Axle amplifier type MDS-B-V2-0303 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

power capacity: 14,5 Nm volt: 0 V ampere: 24,1 A total power requirement: kW weight of the machine ca.: 19 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Repair service Reparatur Service Part: Axle amplifier type MDS-B-V2-0505 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

power capacity: 28 Nm volt: 0 V ampere: A total power requirement: kW weight of the machine ca.: 49 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Repair service Reparatur Service Part: Axle amplifier type MDS-B-V2-1005 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Frama MDC 1300 roller glue applicator Working width 1300mm Working height 70mm Feed speed 16.5m/min 0.3kw feed motor CE Certified Year of production 1999 Weight 332kg

Repair service Reparatur Service Part: Axle amplifier type MDS-B-V2-1010 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Manufacturer: Indramat Permanent Magnetmotor , Type: MDD112B-N-040-N2L-130GA0, Motor with gear: n 4000 Umin, Gear: Km 0,42 Nm/4, Maschinennummer: MDN 17,5, From machine: IDN 41,5,

Repair service Reparatur Service Part: Axle amplifier type MDS-B-V2-2010 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Manufacturer: SEW Mowiedrive Compact MDX60A0110-503-4-00, Type: MDX60A0110-503-4-00, Sale without warranty: 16,8 KVA, No right of return: 0-180 Hz, Installation height: 24 Ampere,

Repair service Reparatur Service Part: Axle amplifier type MDS-B-V2-2020 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Manufacturer: SEW Umrichter , Type: MDS60A0220-503-4-00, Serial number: 0118772, Serial number: 8265097, Sale without warranty: 380-500 Volt, No right of return: 46 Ampere, Installation height: 0-180 Hz, Available: 31,9 KVA,

Repair service Reparatur Service Part: Axle amplifier type MDS-B-V2-3510 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Manufacturer: SEW Umrichter, Type: MDX60A0220-503-4-00, Serial number: 8227144, Serial number: 0153577, Sale without warranty: KVA 31,9, No right of return: 46 Ampere, Installation height: 0-180 Hz,

Repair service Reparatur Service Part: Axle amplifier type MDS-B-V2-3520 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Manufacturer: SEW Umrichter , Type: MDS 60A0220-503-4-00, Serial number: 01.1553425701.0001.04, Systemconfiguration: 08227020,

Repair service Reparatur Service Part: Axle amplifier type MDS-B-V2-3535 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Manufacturer: Weeke Z-Achsmotor, Type: Mdd071B-N-060-N2S-095PL1, Volt: 24, Motor torque Nm: 4.40/6.60, IdN A: 15.00/22.60, n-min: 6000, Weight approx. kg: 9,

Repair service Reparatur Service Part: Axle amplifier type MDS-B-V2-4535 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Manufacturer: Indramat Weeke Permanent Achsmotor, Type: MDD071B-N-060-N2S-095PL1, Year: MDD071-17391, Flange motor design: U/min 6000, Foot motor design: KM 0,29, Diameter mm: Gewicht 9,1 Kilo, Bore mm: 6,6 Nm, Year :MDD071-17391

Repair service Reparatur Service Part: Axle amplifier type MDS-B-V2-4520 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Manufacturer: Weeke Z-Achsmotor, Type: MDD07B-N-060-n2S-095PL1, Volt: 24, Motor torque Nm: 4.40/6.60, IdN A: 15.00/22.60, N1-rpm: 6000, Weight approx. kg: 9,

Repair service Reparatur Service Part: Axle amplifier type MDS-B-V2-4545 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Manufacturer: Indramat Permanent Z Achsmotor, Type: MDD071B-N-060-N2S-095PL1, Model: MDD071-17391, FREE TEXT: U/min 6000, Free text 1: 0,29 Nm/A,

Repair service Reparatur Service Part: Axle amplifier type MDS-B-V24-2020 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Manufacturer: Weeke CNC C-Achsmotot Indramat Permanent Magnet Motor<CRLF>, Type: MDD071B-N-040-N2S-095GAO, Motor with gear: yes, Gear: yes, From machine: Weeke, Motor with gear: yes, Gear: yes,

Die-cut crucible Gietz MDST, machine number 11848, year of manufacture 1989, in good condition, immediately available We have two more Gietz models. Please request a quote. If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Manufacturer: Indramat Motor Y-Achs Antrieb Weeke/Homag<CRLF>, Type: MDD071B-N-040-N2S-095GA0/7P010-MF1-10-040-000, Maschinennummer: MDD071-17390, Motor torque Nm: 4.40/6.60, IdN A: 11.00/16.60, pm: 4000/6000,

Deck Oven W&P Matador MD101C Year: 2019 Little-used deck oven Werner & Pfleiderer Model Matador MD 101C from 2019 is for sale in stock. - Deck oven with gas burner - Manufacturer: Werner & Pfleiderer Lebensmitteltechnik - Type: Matador MD101C52 - Fuel type : Oil gas / current is with gas burner - 79 kW - 5 shelves each 120cm wide and 160cm deep - 1 pull-out stove - With exhaust hood - Combitherm - 3N 400 V 50Hz 12A - Year of construction: 2019

Manufacturer: Indramat Permanent Magnet Motor, Type: MDD071B-N-060N2S-095PL1, Year: MDD071-17392, Flange motor design: U/min 6000, Foot motor design: KM 0,29, Diameter mm: Gewicht 9,1 Kilo, Year :MDD071-17392

Manufacturer: SEW Movidrive , Type: MDF 60A0030-5A3-4-00, Seriennummer: 82666X, Produktionsnummer: 826080X, Frequenzumrichter: yes, Gebraucht: yes,

Ultrasonic Banderolier ATS US 2000 AST-MDM; cleaned and tested; Frame size 900x750mm; Belt width 30mm; suitable for paper (also suitable for TruePaper paper) or foil; Meter reading 795,000 thousand; Compressed air required. Ultrasonic banding machine ATS US 2000 AST-MDM; cleaned and checked;  frame size 900x750mm; band width 30mm; used for paper (also for TruePaper material) or foil; counter 795,000; pressurized air needed.

6-digit inline filler in EX version equipped with mass flow meters (Endress + Hauser) and extensive accessories. Capacity: max. 60 fills/min. Filling volume: 20 ml to 1000 ml per filling station. System incl.: separate control cabinet, cleaning system, pressure expansion tank, screwdriver etc.

Manufacturer: Signode, Type: MDGW 700, Control: Fusspedal, Belt width mm: 8, Bandabroller : yes, Bandspannung einstellbar : yes, Feeding belt control: ka, Funktionswiederholung : yes, Ausstattung Fahrrollen : yes, Rollendurchmesser mm : 600, Box dimensions max. L x W x H mm: 600 x 800,

ATEX calibrator disintegrator mill manufactured by BACHILLER in stainless steel, model MDCB 300. Equipment for the disintegration of agglomerated products, unification of particles for bulk solids and granulation of wet products. Productions from 50 to 5,000 Kg/h. Material Stainless steel Technical features Model MDCB 300 Year of manufacture 2011 ENGINE 1 TECHTOP 5,5 kW 50 Hz 975 rpm Equipment configuration ATEX Condition As is Made by BACHILLER

Calibrating disintegrator mill manufactured by BACHILLER in stainless steel, model MDCB 300. Equipment for the disintegration of agglomerated products, unification of particles for bulk solids and granulation of wet products. Productions from 50 to 5,000 Kg/h. Material Stainless steel Technical features Model MDCB 300 Year of manufacture 2004 ENGINE 1 FIMM 4PE80 B 0,75 kW 50 Hz 1990 rpm Condition As is Made by BACHILLER

Manufacturer: Inadramat , Year: 1999, Type: MDD 112B-N-040-N2L-130GAO, Motor mit Getriebe: Motor mit Tacho und Zahnrad, aus Maschine: Weeke BP 195 T, MdN Nm: 17,9-29,9, IdN A: 68, n-min: 4000, Motor mit Getriebe: Motor mit Tacho und Zahnrad, Price per unit Euro: 2000, Wight approx. kg: 36, FREE TEXT: Neupreis ca. 4400, Year :1999

Roller mill BÜHLER MDDP 1000 x 250 2 x longitudinal corrugations/threads Geared motor, SPB 355-4, Gearbox with timing belt Knife scrapers Good condition

We are offering for sale 2 Units of Rauch MDO650 with Dosing Pipe System and Mass Preheating Station ( mass feeding via robot is not included) : Unit 1 Manufacturer: Rauch Model: MDO650 E Melting Capacity: 650 kg/h Holding Capacity: 2,020 kg Year of Manufacture: 2015 Includes: Mass preheating station MVE 750 E - Year of Manufacture: 2015 Unit 2 Manufacturer: Rauch Model: MDO650 E Melting Capacity: 650 kg/h Holding Capacity: 2,020 kg Year of Manufacture: 2015 Includes: - Mass preheating station - Year of Manufacture: 2015 Find more here - / Contact us at -

Manufacturer: Rauch Model: MDO1000 E with dosing pipe system and ingot preheating station Year of Manfucture: 2018 Ingot preheating station - Year of manufacture: 2014 Specifications: - Melting capacity: 1,000 kg/h - Holding capacity: 2,950 kg Find more here - / Contact us at -

Description Gravimetric doser Power supply voltage: 220 V Total installed power: 1 Kw Mixer motor power: 0.18 Kw Number of hoppers installed: 2 production: 80 Kg/h hopper capacity: 2 x 18L Mixing chamber capacity: 7L

Description Gravimetric doser Power supply voltage: 220 V Total installed power: 1 Kw Mixer motor power: 0.18 Kw Number of hoppers installed: 4 (3 SHUTTER STATIONS AND 1 SCREW STATION) Production: 80 Kg/h Hopper capacity: 4 x 18L Mixing chamber capacity: 7L Screw flow rate: 24 Kg/h (16 x 16 screw)

Description gravimetric dispenser production: 30 Kg/h hopper capacity: 2 x 5 lt model with load cell on the mixer

Description volumetric dispenser production: 0,5-7,2 Kg/h with 16x16 auger, 38:1 reduction gear master hopper capacity 12 dm3 central hopper capacity: 17 dm3 mixer capacity : 3 dm3

Description Gravimetric doser Power supply voltage: 220 V Total installed power: 220 W Mixer motor power: 0.18 Kw Number of installed hoppers: 2 production: 30 Kg / h hopper capacity: 2 x 18L Mixing chamber capacity: 7L

Description Gravimetric doser Power supply voltage: 220 V Total installed power: 220 W Mixer motor power: 0.18 Kw Number of installed hoppers: 2 production: 30 Kg / h hopper capacity: 2 x 18L Mixing chamber capacity: 7L

Description Gravimetric doser Power supply voltage: 220 V Total installed power: 220 W Mixer motor power: 0.18 Kw Number of installed hoppers: 2 production: 30 Kg / h hopper capacity: 2 x 18L Mixing chamber capacity: 7L

Description volumetric mixer dispenser production: 0,5-7,2 Kg / h hopper capacity: 20 l power supply: 400 V absorbed power: 0.23 Kw Piovan loader / aspirator mod. S31 power supply: 220V Power consumption: 1Kw

Description PANASONIC - SERVO MOTOR AC Model: MDMA202A1G

Description MURR ELEKTRONIK - POWER SUPPLY Model: MDK 36 196-500V/24VDC/230VAC/120VAC