mbo folder used for sale

THREE HHS HOT GLUE SYSTEMS to install on any folder gluer - from 1 to 4 glue points- years 2005/2010- Programmation- without guns- Price: 1.000 euro each LOT. NORDSON HOT GLUE SYSTEM MODEL 2035 with one spray gun included – 4 exits- PRICE: 1.000 euro LOT.

Edge banding machine Cehisa SYS 5PS - Only about 60 km edges glued / little used! - Condition tiptop - Sturdy construction all important aggregates available: - Infeed ruler - Joining milling - Preheat plate - Glue application - Apply edges (rolls or strip magazine) - Pneumatic pressure roller driven - Pressure roller on top, spring-loaded - Pressure roller at the bottom, spring-loaded - Caps front & rear - Flush milling top and bottom - Copy corners front and back -Scraper - Schwabbelscheibe Accessories: -Tool - Feed rollers for various edge materials - various spare blades - Settings folder Year of construction 2008 Masch. No. 532 The machine is approx. Available at the beginning of October (probably earlier) and would then have to be picked up on a fixed date. Disassembly and collection by buyers The machine is in top condition, ready for  ...

HORIZONTAL CARTONING MACHINE IMA, MODEL A94 Year of construction: 2002 Fully automatic continuous motion horizontal cartoner for blisters, with balcony structure. Features: - Centrally adjustable product chain - Automatic blister infeed system - Siemens PLC - Argus Laetus coder - GUK FA 21/4 leaflet folder and inserter - Stainless Steel construction - Full interlocked guarding - Manuals, technical documentation and drawings in English and Polish Suitable box sizes: length 55mm to 210mm, width 25mm to 110mm, height 12mm to 85mm. Manufacturer's suggested maximum speed output of 320 cartons per minute (last run at 280 cartons per minute). Machine size: 5100mm L x 1650mm W x 2100mm H Approximate weight: 3500kg

This is a fully refurbished, VERY powerful, multitasking Two (Twin) ARP Shaft Shredder. The machine has gone through complete check and change of all flanges, bearings, reducer and oil inside. The machine full specs are: - New motors of total power 20hp - 15kw (2 x 7,5kw motors) - Alternative hydraulic power motors which fit perfect if the machine needs to work on a truck. - 24 knife pieces X 20mm per piece - Made in Germany - Cutting chamber 500mm X 575mm - Approximate weight 2 tons - New control panel with Siemens PLC, Star - Delta, over-current and over-temperature motor protection, Amper Display. - Automatic reverse upon overload and optionally manual forward and reverse. - Special hood used for small items (ie. paper, hard drives) or big hood for barrels and wood. - Hood opens in front for adjusting belt conveyor This is ...

Used CMC SH30 Overwrapping machine composed of: - newspaper format feeder - newspaper folder - 3 feeder - staker (Robot 305 PMS) - Ceccato worm screw compressor

Cartoner Manufacturer Klockner Model P120 Located in United Kingdom with Guk leaflet folder

STAHL FOLDER 4 PARALLEL PLATES + 1 CROSSED Size 49x ...

Horizon Cross Folder Model AFC-504AKT Machine is in stock and is immediately available

We sell SOFRAPLI folder size 35x70 in perfect working order. Manual insertion of up to 2 pockets. Possibility of folding a large number of formats.

3 MONTHS WARRANTY offer consists of: Horizon AFC-566 FKT 6-buckles cross folder + 1 knife + 2 buckles - parallelfold rollers condition: - crossfold rollers condition: - technology: touch & work - roller adjustment: fully automatic - memory folding types: 17 standard-typs of fold preprogrammed - Savable Jobs: 200 memories for repeat orders - knife: full automatic - sheet size: max. 558x850mm; min. 128x148mm - fold length: 1. Buckle: min. 58mm All other buckles: min. 35mm - paper weight: 40-250g/sqm - pile height: 740mm - Speed: max. 50,000 cycles/h - power: 400V/50Hz - 2,7kW - Dimensions: 3.100x1.090x1.680mm (without conveyor) - Weight: 1.450kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Harro Höfliger Cartonetta horizontal end-load cartoner, with hand fed bucket infeed, including flat sheet leaflet folder, glue closure with Nordson ProBlue 4 hot melt unit, carton size range min. 15 x 15 x 54 mm, max. 92 x 66 x 180 mm, output up to 75 cartons per minute (2000 overhauled by Harro Höfliger)

Cartoner for closing blister in corresponding boxes. Machine incl. GUK-leaflet folder, unit for booklet feeding system etc. Machine is in line with the blister machine, type UPS 1040.

KRÜSI chalet construction machine / log cabin production system type CM 40 Manufacturer: Krüsi Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of construction: 1996 S/N 431 Condition: good, technically checked and cleaned / ready for use Machine description / equipped with: 1. Sawing unit: Hand feed Spindle adjustment with analogue dimension display 2. CM milling unit: Hydropneumatic feed Spindle adjustment with digital dimension display 3. Drilling unit: Hand feed Spindle adjustment with analogue dimension display 4. End milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Specifications Workpiece Cutting height max. 200nn Cutting width max. 250mm Working table height 900mm Sawing unit Saw blade Ø max. / bore ø 400 / 30 mmm Tungsten carbide equipped with chip depth limiter (synchronization)  ...

Sideloading cartoning machine for closing blister in corresponding folding cartons. Machine incl. GUK-leaflet folder, RONTECH booklet-feeder (built in 2015) etc. Cartoner is in line with the blister machine, type CP 400.

Folding machine Schoei Schoei CB74-KLI-HP B1 with; flat pile feeder, 4 buckles, 3 knives, 32 pages folder, with press in good working condition, under power, and available immediately

Prestige Fold52 folder with window fold 52/6 - FSA, NET 52/0/6, DRY PUMP

Mileage : 2000000 sheets 8 pockets+1 knife Format :B2 Classic folder + folder for leaflets. The machine is in excellent condition, still functional, possible demonstration.

Size: 1100 mm Equipments: Speed Max. 400 m/min Inching speed 10 m/min Machine weight 7,6 Tons Dimensions 15 x 1,70 x 1,90 m Electrical connected load 15 kW Automatic Four Six Corner Folder Gluing Machine Air tank capacity 60 L Compressed air 6 bar Carton board max. 800 gsm Blank width 1100 mm Thickness of folded box max. 20 mm Corrugated flute type N, E & F

equipped with pneumatic clamping; 1 ELCO EM 14 control box

Pump Stitching unit (HSB 8000) Folder feeder (x 6) Thickness control Hand feeding station Stitch control Cover feeder

Writing desk, rolling desk, floor trolley, logistics trolley, shelf trolley Transport trolley, platform trolley, workshop trolley FETRA Type 5834 Writing surface height: 1100 / 1190 mm Writing surface: 605 x 585 mm Shelves: 600 x 495 Load capacity per shelf: 50 kg Total load capacity: 100 kg Roller pult made of tubular steel and profile steel screw construction, powder-coated, blue RAL 5007 - Writing surface on wooden board with stop strip, approx. 10 inclined - 2 shelves, variably screwed in (2 folder heights possible)- 4 pieces of swivel-fixed castors (125 mm) with plastic rim and rubber coating on the tread - 2 pieces fixed castors with brakes Space requirements L x W x H: 600 x 600 x 1190 mm Net weight: 25 kg very good, as good as new condition; used

Hanging filing steel cabinet, drawer cabinet, tool cabinet, filing cabinet, hanging file cabinet DELTA-V BASE LINE 840 x 620 x 1320 mm Art. No.: 236579 4 drawers: width 760 mm, depth: 540 mm, height: 280 mm capacity: approx. 640 folders ( A4 ) colour: light grey ( RAL 7035 ) used, tested ! Dimensions: 840 x 630 x 1320 mm

Transverse roller shutter cabinet, folder cabinet, roller shutter cabinet, office cabinet PAGUS 1200 x 420 x 1100 mm usable space: 1000 x 360 x 1030 mm ( width x depth x height ) two shelves 1000 x 360 mm made of metal, height adjustable door hinge left, lockable visible rear panel in body colour colour: light grey used, tested ! Dimensions: 1200 x 450 x 1100 mm

Transverse roller shutter cabinet, folder cabinet, roller shutter cabinet, office cabinet PAGUS 800 x 420 x 750 mm usable space: 610 x 360 x 680 mm ( width x depth x height ) two shelves 610 x 360 mm made of metal, height adjustable door hinge left, lockable visible rear panel in body colour colour: light grey used, tested ! Dimensions: 800 x 450 x 750 mm

2 x VAC-100 A / C – x stations 1 x SPF-200 A stitcher & folder 1 x FC-200 A fore-edge trimmer 1 x PJ-77R Jogger receiving Tray 1 x LC-200 long conveyor Availability : 01/2024

2. Folder for CAS 52 or CAS 38A, 4 automatically bags,

Capsule folder for sparkling wine Capsule applicator with orientation and shrink head for shrinkable capsules. Sparkling wine with orientation 3200 Fl/S, without orientation 3500 Fl/S. PVC 6.000 Fl/S. Capsule type: winecapsule shrinking, champagne cap applicator, winecapsule applicator, champagne cap folding, optical orientation Working direction: left-right Working type: fullautomatic Amount of capping heads: 4 More then 300 machines new and second hand on our seema .de

Horizon AFC 546 AKT Cross Folder Age: 2004 Format: 540 x 760 mm Speed: 230 m/min Automatic adjustment Touch & Work Technology Memory Storage for Folding Programs Flat Pile Feeder 6 buckles Rilling and Perforation 1 knife 1 buckle after knife on left and right side Anti Noise Hood Delivery Conveyor

Blister packaging line, consisting of: Thermoforming blister machine Mediseal CP 400 and folding box cartoning machine Mediseal P 3000, incl. new PLC, operator terminal (HMI) and servocontroller: Thermoforming blister machine CP 400: • Set up for PVC/ALU film (conversion to ALU/ALU possible at extra cost) • Output thermoforming station max. 50-60 cycles/min depending on blister format • Output punching station max. 400 blisters/min depending on blister format • Foil width max. 160 mm • Roll diam. max. 500 mm, core diam. 70-76 mm • 2 roll holders for thermoforming film with film spreader and gluing device for roll change during operation • Pull-off length in thermoforming range 140-220 mm • Drawing depth PVC max. 12 mm • Drawing depth ALU max. 9.5 mm • Feeding: directional tablet feed with spiral conveyor and alternatively brush box (without format parts) ...

Masch. No. 101 987 For medium to large series/runs Suitable for: cardboard, cardboard, etc. Areas of application: ring binders, letter folders, etc. Rivet feeding via pawl-driven, rotating sorting hopper • Riveting tongs • Rivet stroke 55 mm • Standard version for processing hollow rivets 4 mm shaft diameter, lengths up to 19 mm, head diameter 6 - 8 mm or 8 - 10 mm Brake motor Cycle time 0.5 sec. Rivet spacing adjustable from 35 - 440 mm left rivet head can be switched off by means of a sliding clutch

2015 buckle folder AF-406A Flat Pile Feeder 1. Folding Unit: 6 Buckles sheet size: max. 400x650mm; min. 100x50mm fold length: max. 350mm; min. 20mm PST-40 press stacker with delivery SCV-406 delivery conveor In production Available: immediately Located: Germany

Blister packaging line consisting of: Thermoforming blister machine Uhlmann UPS 1030 MTI and folding carton packaging machine Uhlmann C 2205. Major service 2014 by the manufacturer. Thermoforming blister machine UPS 1030 MTI (multi-cycle intermittend): • Set up for ALU/PVC-PVDC-PP aclar operation / Alu/Alu cold forming prepared • Output punch max. 210 cycles/min • Output max. 600 blisters/min • Feed rate max. 144 mm • Blister width max. 255 mm • Drawing depth max. 10 mm • Roller stand • Dedicated feeder (standard feed channel vertical) for tablet / capsules • Sealing roller and preferential roller cooled • Product inspection with CCD colour camera VisioChrom retrofitted in 2014 • Compact station with embossing, perforation, die-cutter • Reject station for partially filled/empty • Transfer conveyor to cartoner • Control Beckhoff IPC with HMI  ...

Electric chain hoist, crane, indoor crane, assembly crane, manual trolley, push trolley, crane trolley, trolley, crane trolley, crane trolley, trolley -Manufacturer: Balkancar, electric chain hoist with trolley -Load capacity: 125 kg -Main stroke 8 m/min -Delivery head: 12 m -Protection class: IP44 -Dimensions: 320/250/H660 mm -Weight: 31 kg

- Software updated: 3.15.8 - Hours: 1280 - Working radius: 850 mm - Payload: 5kg Condition: very good, hardly any wear due to the low loads. Mainly used for measuring sensors in the laboratory. Circumference: - Robot with control panel and control - Folder with user manual - mobile, solid table

3 MONTHS WARRANTY Offer consisting of: - Pocket Folding Machine AF-406A - Flat pile feeder - Standing arch delivery ED-40 Horizon AF-406 A 6-Pocket Folding Machine - Parallel Break Rolling Condition: - Technology: Touch & Work - Memory Fold Types: 13 standard fold types pre-programmed - Job memory: 200 memory slots for repeat jobs - Number of pockets: 1. Folder: 6 pockets -Format: max. 400x650mm; min. 100x50mm - Fold length: max. 350mm; min. 20mm - Paper weight: 40-250g/sqm - Loading capacity: 500mm - Output: max. 30,000 cycles/h - Electricity: 230V/50Hz - 1.5kW - Dimensions: 1,800x890x1,400mm (without display) - Weight: 550kg Horizon ED-40 Standing arch delivery - Use: for folded small formats with counting function for offset printing - Format: min 20mm max 110mm - Compatible with: Horizon KTU-35 Horizon AF-406; AF ...

3 MONTHS WARRANTY Offer consisting of: - Pocket Folding Machine AF-406A - Flat pile feeder - Standing arch delivery ED-40 Horizon AF-406 A 6-Pocket Folding Machine - Parallel Break Rolling Condition: - Technology: Touch & Work - Memory Fold Types: 13 standard fold types pre-programmed - Job memory: 200 memory slots for repeat jobs - Number of pockets: 1. Folder: 6 pockets -Format: max. 400x650mm; min. 100x50mm - Fold length: max. 350mm; min. 20mm - Paper weight: 40-250g/sqm - Loading capacity: 500mm - Output: max. 30,000 cycles/h - Electricity: 230V/50Hz - 1.5kW - Dimensions: 1,800x890x1,400mm (without display) - Weight: 550kg Horizon ED-40 Standing arch delivery - Use: for folded small formats with counting function for offset printing - Format: min 20mm max 110mm - Compatible with: Horizon KTU-35 Horizon AF-406; AF- ...

Amada schiavi hfb 80-25 folder -model hfb 80-25 -folding length: 2.5 m -folding force: 80 tn -cnc 2k -axles: 8 axles -year 2002 -weight: 6000 kg -There is currently a fault in one of the proportional valves of one of the pistons of the y1,y2 axes. The approximate cost of the piece is €3,300 The price includes loading the machine on a truck. Transportation, unloading and start-up of the machine is not included in the price and will be the responsibility of the buyer.

THE AMADA SCHIAVI FLEXA 100/30 FOLDER HAS THE FOLLOWING FEATURES: • YEAR OF MANUFACTURE: 2006 • FOLDER POWER: 10 KW • WEIGHT OF THE FOLDER: 6500 KG. • NUMBER OF AXLES: 8 • TONS (STRENGTH): 100 TN • FOLDING LENGTH: 3 M. • DIMENSIONS: 11463X4633 MM THE FOLLOWING TOOLS ARE INCLUDED IN THE PRICE: PROMECAN TYPE PUNCHES (1193, 30º, R=0.6, H=104) 100 TN/M -2PCSX835MM -1PCX415MM -1 SEGMENTED SET (2 UNITX100MM, 1 UNITX270 MM, 1 UNITX10 MM, 1 UNITX15 MM, 1 UNIT X 20 MM, 1 UNIT ) PROMECAN TYPE MATRIX (MULTI V) 100 TN/M -3 UNITS THE FOLDER IS IN OPERATION, WITH ITS MAINTENANCE UP TO DATE. THE PRICE INCLUDES THE LOADING OF THE MACHINE ON A TRUCK. TRANSPORTATION, UNLOADING AND COMMISSIONING NOT INCLUDED IN THE PRICE AND WILL BE borne by the BUYER.

HORIZON AFC 566-FKT Fully automatic adjustable combination folding machine with shed delivery Fully automatic from feeder to roller spacing Settings accurate to the thousandth of a millimeter Zero waste for repeat orders Touch&work technology – central and easy to use Wireless remote control for fine corrections Folder with 6 pockets 1 folding sword with fully automatic adjustment 1 subsequent folded pocket Touch&Work Technology 17 standard fold types Job Memory: 200 Set up in seconds Double-sheet control Sheet travel monitoring Creasing and perforating device Output: max. 50,000 cycles/h Paper weight: 40-250g/sqm Stack height feeder: 740mm Format: min. 128x148mm max. 558x850mm Compressor T4.40

-Booklet- Making line Horizon Year 1996 -Suction feed collator with 8 stations -Max paper size 318 x 470 -Min. paper size 148 x 210 -Thickness from 40 to 270 gr. -Speed max 3.500 books/ h N. 1 folder- stitcher Horizon SPF-10 II -Two stitching heads -Size max 330×470 mm -Size min. min 210×210 mm -Speed 2600 cycles / hour -Jogger, all manuals and accessories

Continuous motion horizontal cartoning machine suitable for packing blisters in folding boxes. Machine incl. 90° blister feeder, booklet feeder from magazine, GUK-leaflet folder, type FA21/4 SVA/21, code reader LAETUS type Argus 6012, coding device, PLC SIEMENS type Simatic S7-300. Speed: Up to 260 cartons/min.

Power: 30.000 c./h Max. sheet format: 82 x 128 cm (RFH) 82 x 120 cm (FFH, PFH) Min. sheet format: 14 x 18 cm / 20 x 18 cm with double suction wheel Max. folding speed: 230 m/min in parallel folding 200 m/min in the cross fold Pockets: 6 Knives: 2 Counter: 19'665'000 Equipment / Additional information: Feeder PFH-82 Pocket folder BUH-82, 1st station Cross folding machine CAH-82 Delivery TSH-70

B+S/Heino Ilsemann/Bosch/OCS/Pester Labelling & packing line for ampoules and vials comprising: Bausch + Ströbel ESA 1025 high output self-adhesive labelling machine suitable for ampoules/vials, object diameter up to 36 mm, object height up to 140 mm, output up to 370 1ml.-ampoules/vials per minute and up to 290 5ml.-ampoules/vials per minute direct transfer of the ampoules (vials are directly fed to the Bosch CAR T5 cartoner) to Heino Ilsemann BMP-400 blister machine for ampoules in blister without lidding foil, automatic feeding system for placing the ampoules into the blisters, max. drawing depth 35 mm, max. forming width 270 mm, max. usable punching area 250 x 180 mm, punching cycles max. 40 per minute, capacity up to 320 blister per minute Bosch CAR T5 horizontal cartoning machine, intermittent motion, carton size range from 20 x 16 x 60 mm (AxBxH) up to 95 x 70 x 200 mm (AxBxH ...

Equipment: Double-sided adhesive tape dispenser for folder-gluer is controlled by an existing electronic glue application control system. controlled, 24V valve, clamping over 30mm square, pneumatically driven cutting knife device.

6-buckles cross folder + 1 knife + 2 buckles, roller adjustment: fully automatic, full automatic knife, max.paper size: 55x85 cm, min. paper size: 12,8x14,8 cm, weight 1.450kg

MOBERT ROLLER 110 6M,, for pre-cut open top bags in a roll, packed in rolls with paper tape, for 1 - 2 - 3 lanes, different bottom shapes available, 2 lanes roll width 420 mm, 3 lanes roll width 300 mm, min roll width 150 mm, Max roll diameter 110 mm, minimum bag length 250 mm, max bag length 1.500 mm, Construction year 1997, Mother reel driven unwinder, max width 1.700 mm, slit and seal unit 1.700 mm. n.2 knives for 3 lanes, gusseting unit 1.600 mm 3 lanes, 2-lanes star-bottom folder, 2-lanes folder for C fold, n.2 automatic taping units, n.1 tension stabilizer for electric cabinet, excellent working conditions

mobile 2nd folder with 4 pockets, TD-66/4-T Motorized adjustable pockets Soundproofing hood

The booklet production line consists of: Gathering tower DC-10000S with 10 suction stations format A3/A4/A5 Staple and folder DBM -250 with automatic format setting with stitching heads Hohner Trimmer DC – 48TW Compressor

Code: 0195 Brand: FRAMAR Model: MBO-T9 - CE Standard Electronic horizontal chisel mortising machine for slots of different lengths and depths for window, shutter, balcony and door posts - CE Standard Technical data Tool motor power Hp 3 Hydraulic system motor power Hp 0,5 Worktable longitudinal stroke mm 350 Worktable transversal stroke mm 150 Head vertical stroke mm 80 Worktable dimensions mm 1000 x 250 Worktable height mm 850 Programmer and display for reading data and storing the various programs inserted N° 4 hydraulic pressors for clamping the pieces Aluminium guides with compensating stops Overall dimensions mm 1400 x 1200 x 1200 h Weight kg 580

20 Station Horizon Vac 100a+m, Year 2001 Collator VAC-100a Collator VAC-100m ST-40 Stacker receiving tray SPF-20A Stitcher and folder with two stitching heads FC-20A Fore Edge Trimmer Available: at short term