mbo f 520 used for sale

Key data: 1500 kN

Arburg 520H 1500-290 e² / Hybrid machine / Production line with the Wittmann W818 side robot / Operating hours: 21,588 h in automatic mode Year of manufacture: 05.2016 Injection unit: Screw diameter: 30 mm Injection weight: 97 g Spray pressure: 2500 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 150 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 21,588 h in automatic mode Euromap 67 Robot interface Air Valve x 5 Core train control Air Core Pull x 3 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which  ...

Key data: 1600 kN

Arburg 520S 1600-290/100 / Production line with the Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of manufacture: 09.2011 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Spray pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 160 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Very good technical condition Operating hours: 20,181 h in automatic mode Total number of operating hours: 28,473 h Euromap 67 Robot interface Air Valve x 3 Hydraulic, needle-core pull, controlled by a proportional valve x 2 Reinforced Injection Units – Bimetal Proportional valves on sprinkler units - precise spraying Machine with two cylinders / bat ...

Key data: 1600 kN

Arburg 520S 1600-400/170 e² / Production line with the Geiger robot Year of Make: 2012 Injection unit: Screw diameter: 35 mm Injection weight: 141 g Spray pressure: 2500 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 160 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2K injection moulding machine with rotary table and robot Geiger Very good technical condition Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 5 Control with hot runners x 12 Reinforced Injection Units – Bimetal Machine with two cylinders / batteries with compressed nitrogen (extra charge for fast work) The machine has a servo motor built into the injection unit, which is responsible for dosing the pla ...

Hydraulic injection moulding machine manufactured in 2017. This SUMITOMO SHI DEMAG Systec 160/520-600 features a clamping force of 1600 kN and a tie bar distance of 520 mm. The machine includes an injection unit with a screw diameter of 40 mm, 45 mm, and 50 mm, and a maximum shot weight of 313 g. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 160/520-600 machine we have for sale. Contact us for further details.

Key data: 6500 , 95

Demag 650 T type Ergotech 650-520 Année : 1997 Commande : NC4 Force de fermeture: 650 T Diamètre vis : 95 mm Volume injectable : 2835 cm3 Poids de l’injection en PS : 2550 gr Pression d’ injection : 1832 bars Course d’ouverture : 930 mm Distance entre colonnes : 1000 x 900 mm Dimensions des plateaux. : 1450 x 1350 mm Epaisseur min max moule. : 450 - 950 mm   Dimensions presse : 5,50 x 2,40 x 2,20 m Poids machine. : 35 500 kg ( 23500 kg + 12000 kg )

B&A REF: 9291 TON: 160 SCREW DIAMETER: 50MM SHOT WEIGHT: 402 STROKE VOLUME: 442CM3 INJECTION PRESSURE: 1946AR PLATEN SIZES: 770 X770MM DBTB: 520 X 520MM MIN MOULD HEIGHT: 275MM MAX MOULD HEIGHT: 585MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 1085MM EJECTOR STROKE: 160MM CONTROLS: NC5 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 22 SERVO DRIVE HEATING CAPACITY: 14.8KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC

Inv. Num. : 9027 Type: SE 520 - 1000 Producer: TRENS Created: 2017 Parameters: Control system: SIEMENS Sinumerik 840D Max. turning length: 1000 mm Maximum turning diameter: 520 mm Equipment: 3x bezel 15x quick-release bracket

turning diameter: 500 mm turning length: 1000 mm control: Heidenhain total power requirement: kW weight of the machine ca.: 3200 kg t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Komptech Crambo 5200 Facilities Crambo 5200 D direct T4f/StufeV EU Declaration of Conformity Engine Oil Drain C13/C18 Trailer Machine documentation Connect! VT Set Sickle Tooth Universal roller Cassette Bio VT Set of Bio Teeth Organic tooth holder unequipped Strainer basket 180 mm Bio Standard discharge belt Discharge belt 6.5 m Overbelt magnet Trailer Trailer drive-up device E-air compressor for supply trailer Slip-on shoe 50mm incl. safety device Wireless remote control Central lubrication HyDrive 2.0 - C13B T4f/StufeV Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.

Komptech Crambo 5200 # 447202 Facilities Crambo 5200 D direct T4f/StufeV EU Declaration of Conformity Engine Oil Drain C13/C18 Trailer Machine documentation Connect! VT Set Sickle Tooth Universal roller Cassette Bio VT Set of Bio Teeth Organic tooth holder unequipped Strainer basket 180 mm Bio Standard discharge belt Discharge belt 6.5 m Overbelt magnet Trailer Trailer drive-up device E-air compressor for supply trailer Slip-on shoe 50mm incl. safety device Wireless remote control Central lubrication HyDrive 2.0 - C13B T4f/StufeV Condition: Serviced, rollers hardened Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.

Komptech Crambo 5200 # 447211 Facilities Crambo 5200 D direct T4f/StufeV EU Declaration of Conformity Engine Oil Drain C13/C18 Trailer Machine documentation Connect! VT Set Sickle Tooth Universal roller Cassette Bio VT Set of Bio Teeth Organic tooth holder unequipped Strainer basket 180 mm Bio Standard discharge belt Discharge belt 6.5 m Overbelt magnet Trailer Trailer drive-up device E-air compressor for supply trailer Slip-on shoe 50mm incl. safety device Wireless remote control Central lubrication HyDrive 2.0 - C13B T4f/StufeV Condition: Serviced, rollers hardened Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.

Komptech Crambo 5200 # 447248 Facilities Crambo 5200 D directT4f/StufeV EU Declaration of Conformity Engine Oil Drain C13/C18 Trailer Machine documentation Connect! VT Set Sickle Tooth Universal roller Cassette Bio VT Set of Bio Teeth Organic tooth holder unequipped Strainer basket 180 mm Bio Standard discharge belt Discharge belt 6.5 m Overbelt magnet Trailer Trailer drive-up device E-air compressor for supply trailer Slip-on shoe 50mm incl. safety device Wireless remote control Central lubrication HyDrive 2.0 - C13B T4f/StufeV Condition: Serviced, rollers hardened Availability: by arrangement Warranty: The machine is stored in the condition existing at the time of handover. sold. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.

Komptech Crambo 5200 # 447221 Facilities Crambo 5200 D direct T4f/ StufeV EU Declaration of Conformity Engine Oil Drain C13/C18 Trailer Machine documentation Connect! VT Set Sickle Tooth Universal roller Cassette Bio VT Set of Bio Teeth Organic tooth holder unequipped Strainer basket 180 mm Bio Standard discharge belt Discharge belt 6.5 m Overbelt magnet Trailer Trailer drive-up device E-air compressor for supply trailer Slip-on shoe 50mm incl. safety device Wireless remote control Central lubrication HyDrive 2.0 - C13B T4f/StufeV Condition: Serviced, rollers hardened Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.

Radial fan, conveying blower, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, press conveyor, pneumatic conveyor with injector, grain conveyor -Pressure blower: Pneumatic conveyor with filling hopper -Type: Ø 520 mm -Engine power: 4.0 kW / 2920 rpm -Volume flow rate: m³/min -Inlet: Ø 215 mm -Fan wheel: Ø 520 x 45 mm -Fusing funnel: Ø 415 mm -Dimensions: 1790/650/H880 mm -Weight: 119 kg

Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower, exhaust fan -Manufacturer: Nedermann, radial fan pressure blower -Type: 520929 Ø 420 mm -Motor power: 1.5 kW / 2800 rpm -Volume flow rate: m³/min -Inlet connection: Ø 155 mm -Outlet connection: Ø 155 mm -Fan wheel: Ø 420 x 30 mm -Dimensions: 630/4300/H680 mm -Weight: 24 kg

Laminator Bagel Digifav 520 B2 automatic laminating machine - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Laminator Bagel Digifav 520 B2 automatic laminating machine Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Laminator Bagel Digifav 520 B2 automatic laminating machine Price: 16000 EUR Download PDF Laminator Bagel Digifav 520 B2 automatic laminating machine The machine is 100% functional, in perfect condition, ready for production. Very low mileage. It is an advanced, high-performance machine dedicated to digital printing houses. Production Spain. Technical data: Max sheet size: 520 ...

- Optional chuck 1200 mm - 2 Axis RSF Digital read out - Conical turning attachment - Spindle bore 130 mm - Central lubrication

Discover the power of EST TICINO and its impressive ET-BM-CT 520 model. A used ET-BM-CT 520 is a prime example of the sturdiness and reliability of the brand. Boasting substantial swing over the bed (1040mm), cross slide (710mm), and insurmountable swing in the gap (1580mm), its prowess extends beyond the average. With an impressive 40 kW spindle power and 160mm spindle bore, your performance expectations will be commendably met. Its 3-guideway construction and double V Prima guideways add to the robustness of this model. The added features of a steady 600mm and 7800mm rest, a 4-chuck 800mm, and an Oil Country 160 spindle bore significantly enhance its operational capability. Additionally, the ET-BM-CT 520 offers an optional larger chuck up to 1500mm. These sought-after attributes present versatile applications, thus being ideal for heavy-duty metalworking, tool manufacturing and compone ...

used Arburg 520C 2000-675, built in 2000 for sale: Machine cycles = 3.6802.856 Pump hours = 46,142 Operating hours automatic = 37,814 Screw diameter = 60 mm Machine with safety fence and with used auxiliary unit, but without conveyor, without hopper and without handling. The machine is currently still connected, a visit would be possible at short notice.

Hydraulic injection moulding machine manufactured in 2001. This Krauss Maffei 125-520 C1 features a clamping force of 125 T and a screw diameter of 45 mm. It has a shot volume of 275 cm³ and a platen size of 745 x 770 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 125-520 C1 machine we have for sale. Contact us for further details.

Key data: 520 mm, 250 mm, 5 kW

TECHNICAL DATA: Working width: 520 mm Working height: max. 250 mm 04 Knives Electric height adjustment 2-speed feed Installed power: 5.15 kW

SCM surface planer offered. Working width: 520mm, cutter block diameter: 120mm, knife dimensions X/Y/Z: 520mm/35mm/3mm, max. speed: 5000rpm, max. depth of cut: 8mm, total jointer table length: 2750mm, infeed table length: approx. 1550mm, dust extraction port diameter: 120mm, machine dimensions X/Y/Z: approx. 2750mm/1415mm/1200mm, weight: 875kg. Inspection by appointment possible.

KRAUSS MAFFEI 150 T type 150-520 C2 Force de fermeture : 150 T Année : 2003 31000 heures de fonctionnement Diamètre vis : 40 mm + 1 ensemble vis fourreau 50 mm Volume injectable : 217 cm3 / 340 cm3 Pression d’injection : 2377 bars Distance entre colonnes : 500 x 560 mm Dimensions des plateaux : 780 x 840 mm Epaisseur mini moule : 300 mm Course d'ouverture : 600 mm Interface euromap Noyaux hydrauliques Poids : 6 400 kg

table length: 630 mm table width: 630 mm table load: . t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1400 mm turning diameter over slide rest: 1400 mm turning length: 5000 mm workpiece weight: 25 t turning speeds: 0,6-300 U/min : 4-jaw-chuck diameter: 800 mm control: Siemens transmission ratio: 3 total power requirement: 100 kW weight of the machine ca.: 70 t dimensions of the machine ca.: m Renishaw Probe Depth of profile with 80mm tool 355mm @ 1400mm dia. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment ...

turning diameter: . mm turning length: . mm control: . type: . CCUO turning diameter over slide rest: . mm cross movement: . mm spindle passage: . mm turning speeds: . U/min transmission ratio: . quill stroke: . mm rapid traverse: . m/min main drive motor: . kW 3-jaw-chuck diameter: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment.  ...

Manufacturer: Jung Year of Manufacture: 1981 Model: JF 520 (JF520 series) Type of Machine: Flat and profile grinding machine Condition: Fully functional Technical Specifications - Phases: 3 - Frequency: 50 Hz - Rated Current: 30 A - Supply Fuses: 35 A - Control Voltage: 220 V Find more here - .ucymachines/ Contact us at - sales@ucymachines

planing width: 520 mm; planing shaft type: tersa; number of blades: 4; sourface table length: 3000 mm; table adjustment: electrically; read out table height: digital; sourface fence adjustable: yes; motor power: 7 kW; suction connection: 120 mm; machine length: 3005 mm; machine width: 1460 mm; weight: 870 kg; - Dressing tables made of gray cast iron - The dressing table adjustment takes place via a precise parallelogram system, so that the distance between the table tips and - - the knife shaft remains the same in every adjustment position - Large precision aluminium dressing fence, slightly tiltable 90 - 45 ° - The inclination of the stop is easily readable from the operator side - As standard with auxiliary stop for safe planing of even narrow workpieces - Large four-knife shaft, precision-mounted - Quiet running with precision aggregate and heavy cast iron execution -  ...

Qty. 1 Second-hand extrusion press Mfc.: TBA Force: 85 MN Type: Loading Single action short stroke Built: 2026 – Never used! Billet dia.: 520 mm x 900 - 1800 mm L Ready for painting according to buyer’s requirement. Ready for shipment! All missing parts of the complete line can be also quoted, if requested. SCOPE OF SUPPLY 85 MN short stroke single action direct extrusion press Hydraulic type loader Billet-transfer loader Scrap-transfer device Billet lubrication device Extrusion tool Scrap Knocker Die shuffle Die Pusher Hydraulic System Electric System Spare parts

CONTROLS   electronic controls WORKING RANGE SURFACE GRINDING   grinding length: 600 mm   grinding width: 200 mm TABLE (SURFACE GRINDING)   magnetic table: yes MAGNETIC TABLE   length: 600 mm   width: 200 mm   weight: 100 kg SPINDLESTOCK GRINDING SPINDLE   spindle revolutions (max): 4200 /min GRINDING TOOL   type of grinding tool: wheel   diameter (max): 250 mm   borehole: diameter: 51 mm   width: 25 mm ELECTRICAL SPECIFICATIONS   total power consumption: 7.5 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 3000 mm   space requirements -front/back-: 2540 mm   total height: 1850 mm   total weight approx.: 2000 kg

Manufacturer: Kemmerich Model: VD 3000 UF-SH-520-S Type of Machine: Double Decoiling Reel / Uncoiler Year of Manufacture: 1999 Technical Specifications: - Band width: 100 to 520 mm - Band thickness: 0.5 to 2.5 mm - Maximum coil weight: 3,000 kg - Spreading range diameter: 470 to 520 mm - Maximum coil outer diameter: 1,600 mm - Maximum band speed: 25 metres per minute - Reel crown rotation speed: 1 to 15 rpm - Drive power: 2.6 kW - Connection voltage: 480 V AC, 60 Hz - Rated current: 16 A - Control voltage: 24 V DC - Cross shaft height: approximately 1,250 mm - Maximum load capacity per nameplate: 3,000 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

Description Item #8772 – POT FILLING LINE - Line Filling Chocolate Cream/Paste into Pot with Toy Currently producing 18gramme Pots. including: MONDINI Model A/C Tray/Pot Denesting System, LIVETECH Automatic System to insert spoon into pot, Model LSS, with PESCE GROUP MP10 Product Hopper & Elevator Feeder, SARG STM087 Automatic Toy Insertion Machine, to place toy into pot/tray. MONDINI Model VF/SPE Cream/Paste Dosing Unit into the pots MONDINI Model C/T Pot/Tray Lid Thermosealing Unit CICRESPI Model 1602056 Ink Jet Coding Unit LIVETECH Model LSS/LA19947 X-Ray Inspection machine End of Line Belts for packing. line will include the Mould for the Pot/Tray and the Mould for the Spoon

OFFER FOR SALE – GE FRAME 6 (6001B) GAS TURBINE GENERATING UNIT We are pleased to offer the following gas turbine generating unit for sale: Equipment Details Model: GE Frame 6 (6001B) Year of Manufacture: 1997 Commissioned: 1998 Output Rating: 34.49 MW Generator Output: 33.8 MW / 42.25 MVA Frequency: 50 Hz (convertible to 60 Hz) Operating Speed: 5,114 rpm Total Equivalent Operating Hours (EOH): 68,448 hours Fuel Capability: Dual Fuel (Natural Gas / Fuel Oil) Scope of Supply The package includes: Gas Turbine (GE Frame 6, Model 6001B) Diesel Starting System Accessory Gearbox (AGB) Load Gearbox (LGB) Generator Exciter Associated auxiliary systems and controls Maintenance History The unit has undergone scheduled major inspections, including: Combustion Inspections (CI) Hot Gas Path Inspections (HGPI) Major Inspections (MI) Upgrade History Major upgr ...

General SKU293X473 MakePall Europe Limited TypeStax LocationBarneveld Pressure Working pressure3.5 Bar Main Features MaterialStainless steel Pressure3.5 Bar Surface4 m2 Specified Features - Filterpress Filter presscheck Filter surface0,5-4 m² Number of platens1 Number of frames1 Manual operated closingcheck Manual openingcheck MaterialStainless steel 1.4552 General No.62568CC Year of construction2009 Mounted on wheelslab scale chassis Floorspace0,72x0,72 m Total height1,60 m Weight100 kg Extra Specifications- one unused filter SXL PD45408SPPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesDetergent & surf.CosmeticsFood additivesAnimal feedFilterpressesSolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIMinerals & inorganicPallIndustries > Food & Feed > P ...

General SKU366W1554 MakeJulius Montz No.2070346-01 Year of construction2007 LocationBarneveld Main Features MaterialStainless steel Specified Features - Miscellaneous filter Filtercheck MaterialStainless steel 1.4571 (316Ti) General Floor space0,73x0,43 m Total height1,90 m Extra SpecificationsPressure shell side 0,5 bar, volume 212 l.input/ output DN50Oils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMiscellaneous filtersMinerals & inorganicMontzIndustries > Food  ...

General SKU056N226 MakeChemap AG Männedorf TypeFunda Filter No.1912-10-10.75 Year of construction1976 Mounted on legscheck Pressure Working pressure6 Bar Main Features MaterialStainless steel Surface10 m2 Specified Features - Horizontal plate filter Plate filter(1x) Filter surface10 m2 Number of platens22 Platen sizesdia. 800mm Max. temperature80 Degr. c. Centrifugal cake dischargecheck Motor11 KW, 380/660 Volt MaterialStainless steel 1.4571 (316Ti) General LocationBarneveld Floorspace1,6x1,4 M Total height2,9 M Weight1600 KGFine chemicalsOther chemicalBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesDiscountCosmeticsFood additivesAnimal feedSolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalMinerals & inorganicHorizontal plate filtersChemapIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustrie ...

Make: FRIGOPOL Type: RHLL/Hr0017 Compressor types: 2x30L-DLYB-7.5 7.5HP Electrical power 1x14L-DLYB-4.5 4.5HP Electrical Power Refrigerant: R404A Cooling capacity Total: 42 to 50kW at -10C Electrical power 18.8kW Volume flow: 74m3/h Price on request

table length:630 mm table width:200 mm no. of flutes:3 weight of the machine ca.:55 kg

90 cm width

In excellent condition, shaft drive.

General SKU254S209 MakeAVN Apparate, Filterund Anlagenbau (D) No.5379-4 Year of construction2015 Mounted on legscheck Main Features MaterialMild steel Surface7 m2 Specified Features - Envelope filter Air intakedia. 100mm Air outletdia. 200mm Bag dimensions1100x400mm (envelope model) Capacity308 m3/h Dust outletDN250 Filter surface+/- 7 M2 Funnel dimensions1300x800x1000mm Motor4 kW 400/690 volt Number of bags8 Outlet with rotating sluiceJaudt rotary valve type 6301 (2015) DN250 Sanitisationcheck With fan4 kW 400/690 Volt Envelope filters MaterialMild steel General LocationBarneveld Floorspace2,0x1,4 M Total height3,0 M Weight950 Kg Extra Specificationsincluding 4 pieces Eicholz dust collectors of stainless steel type 45 ltr. equipped with DN150 butterfly valveConsumer wastePowdered foodsTea, herbs & coffeeStarchAgrochemicalsSpicesPlastic & polymersCatalysts & ...

General SKU254S212 LocationBarneveld MakeAVN apparate, Filter und Anlagenbau (D) No.5379-2 Main Features MaterialMild steel Surface25 m2 Specified Features - Envelope filter Air intakedia. 210mm Air outletdia. 300mm Bag dimensions1100x800mm (envelope model) Capacity2272 m3/hr Dust outletDN200 (butterfly valve) Filter surface+/-25 m2 Funnel dimensions1400x1200x1200mm Number of bags14 Sanitisationcheck With fan5,5 kW 400/690 volt Envelope filters MaterialMild steel General Year of construction2015 Mounted on legscheck Floorspace2,1x1,9 M Total height3,4 M Weight1300 Kg Extra Specificationsincluding 4 pieces Eicholz dust collectors of stainless steel type 45 ltr. equipped with DN150 butterfly valveConsumer wastePowdered foodsTea, herbs & coffeeStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherDetergent & surf.CosmeticsOrgani ...

Foellmer 45 ME Creaser - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Foellmer 45 ME Creaser Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Foellmer 45 ME Creaser Price: 1500 EUR Download PDF Foellmer 45 ME Creaser The machine is in very good technical and visual condition. One owner since new. This is the newest model, currently in production. The machine has a working width of 450 mm. 380V power supply. Equipment includes a creasing bar, front margin, and side margin. This creaser is recommended for larger runs. It is quiet and powerful thanks to its geared motor drive. It is operated ...

Foliant Vega 400A Laminating Machine - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Foliant Vega 400A Laminating Machine Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Foliant Vega 400A Laminating Machine Price: 12250 EUR Download PDF Foliant Vega 400A Laminating Machine The most equipped laminating machine in Foliant’s offer. Fully automatic machine, ideal for digital printing. Very good condition. Year of manufacture: 2015. Description: – High stack feeding (elevator) – Automatic separator – Pneumatic roller pressure – Sheet straightening module – Built-in compressor for b ...

If mobile chamber filter press / used filter press Filox 800 x 800 construction year: In 1980 record format: 800 x 800 mms benefit length: 5,200 mms chamber number: 88 pieces cake thickness: 25 mms filter pressure: 15 cash Schliessdruck: Min 300 cash, max. 320 cash whole filter surface: approx. 98 square metres cake volumes ges .: approx. 1,100 litres engine tension: 380 V, 50 hertz protective kind: IP 44 record material: PP expiry: openly service side: on the left cloths: Optionally

Chamber filter pressing rack Filox uses 1200 x 1200 with approx. 100 records

Used Membrane Filter Press, Chamber Filter Press for sludge dewatering Rittershaus & Blecher / VEB Stassfurt 1000x1000 ( Mix-Paket) Plate size: 1000x1000mm Cake thickness: 40 mm length: 5500 mm Number of Plates: 60 filter pressure: 8 Bar Membrane pressure: 15 Bar Plate transport: manuell filterclothes: optional Membranmix-Paket The machine is in a goog condition and 15 machines like this availabe.

Smicon FTA 1500U-6L fumigation / gassing system In a fumigation, a room is flooded with a poisonous gas to fight pests / bacteria. Because they are toxic gases, special safety measures are required. Fumigations are common in the storage of organic materials (eg grain storage, in warehouses of harbors, silos, mills), in addition, in churches to control the woodworm. It is a device which is used for the disinfection of rooms. Formaldehyde is boiled on the left-hand cooking plate and placed in a stream of air in a room together with condensed water (right hearth) to kill all the bacteria. Former list price 9,900 EUR Item condition: used More articles - new and used - can be found in our shop! International shipping costs on request!

Vacuum filling machine Frey Konti A 50, filling, portioning, linking, max. 2300 kg/h, filling pressure max. 30 bar, portioning speed max. 300 port./min, all stainless steel, CAN control, impulse control for clipping machine, filling pipes with different caliber. The machine is currently in the refurbishing and can be tested in our facility in Koblenz, Germany.