mbo f 520 used for sale

Machine number: M16694 Y.O.M.: 1995 Working pressure: 6 bar Double jacket: 6 bar Grinding set normally toothed Power: 60 kW case with double jacket Product-in-outlet milk pipe double-acting mechanical seal LWH: 1100 x 700 x 800 mm Weight: approx. 350 kg

Factory number: L10113 Y.O.M.: 1984 Workspace pressure-resistant 4 bar with funnel, switchgear 380 V Circulation line with three-way valve Power: 0.75 kW Grinding set cross-toothed good condition LWH: 300 x 300 x 650 mm Weight: approx. 30 kg

2x KUMERA GEARBOXES COUPLED WITH SCANPUMPS GEARBOX RATIO 1.25:1 PUMPS 1800 RPM / 1642 M3/H

Laboratory mill Factory number: L10116 Y.O.M.: 1985 Workspace pressure-resistant: 4 bar with funnel, circulation line and three-way valve Power: 0.75 kW, 380 V Grinding set cross-toothed Mill and grinding set as good as new Switchgear with emergency stop LWH: 300 x 300 x 650 mm Weight: approx. 30 kg

Grease separator sether boiler, Type: Easy Clean Standard NS 4B completely cleaned and rinsed, grease-free and odourless. leakage test. A spout pump is included in the scope of delivery. New price was 8000,00â?¬ net. Deutschaland-wide shipping in German-speaking countries possible at an additional cost. Delivery: - Boiler grease separator Easy Clean Standard NS 4B - Sampling device DN100/150 horizontal - Spühl pump for grease separators

PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM - MODEL 4HCI3-35/30 YEAR 1990 /2025 PLATE BENDING ROLL LINEAR GUIDEWAYS DOUBLE PINCH PRE-BENDING Machine in good working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 35 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower D 470 mm -side rolls left/right D 420 mm • Hardening of the 4 rolls high strength surface • 3 rolls driven powered with gear unit with hydraulic motor • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening front hydraulic drop-end to unload the closed shell. • Variable speed working roll bending rotation hydraulic speed fas ...

Saw milling Weibert FR3 new â?¢ Format sliding table 2000mm â?¢ Cutting height: 103mm â?¢ Boom table cpl. â?¢ Saw blade: swivel, max.315mm â?¢ 3KW motors (4KW) 400V 50HZ â?¢ Mill: rigid 90° â?¢ Milling rpm: speeds: 1500/3500/6000/8000 rpm. â?¢ Safety railmilling stop 500mm â?¢ Right- and left-hand-running milling â?¢ WJ-400100W7 Accessories: Driving equipment

Technical data of the shelf connector: Shelving system: Polypal The scope of delivery includes: 01x Shelf connectors, used for shelf spacing: 250 mm Total length: approx. 310 mm U-profile dimensions: approx. 50 x 15 mm Material colour: sendzimir galvanised Material thickness: approx. 2 mm Drill hole Ø: 10 mm Weight: 0.270 kg | Pcs. Incl.: 02x Screws M10 x 35 mm 02x Nuts M10 02x Washers M20 Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

QTY 1 x TMP (Division of French Oil, USA) Techni-Mix Lab Mixer, Model HD-5,  Year of manufacture: 2014 (New),  CE Marked, Mixing capacity: 5 Litre, 2 wing tangential rotors, Pneumatic hopper, Tilting body discharge (easy for cleaning), 20HP AC variable speed motor, Rotor rpm - Front 47.55rpm, Rear 39.28rpm. Complete with Electrical controls and in excellent condition.

Floor oven Friedrich E3 6/8 -3 floors each 60x80cm -Upper and lower heat can be controlled separately -digital control -with fermentation chamber -with exhaust hood -can be used on wheels -Floor height 13.5cm -with fermentation chamber

Bread machine Fortuna Premium K with Magnus head machine -6 in a row -Stainless steel -with Siemens Touch control -Cutting rolls and Kaiser rolls -Built in 2010

P181 - used approx. 40 m³ / 40,000 litres PE-HD-tank, plastic tank, flat bottom tank, double-walled with an outer hull. specifications: capacity: approx. 40 m³ / 40,000 litres material: PE-HD tank, plastic tank manufacturer: Formoplast Kunststofftechnik GmbH measurements: Ø approx. 3,49 m outside / Ø approx. 3,00 inside x height tank approx. 5,70 m / total height approx. 6,50 m mark of conformity: PA-VI 321.103 specific weight: 1,13 kg/L media: former chemical tank for formalin DIBT and media list available, suitable for AHL and ASL PE-HD tank, professionally cleaned and in good condition. Double-walled, i.e. with an outer hull, non-translucid, various connections such as ventilation, inlet, suction pipe, etc., lid on top of the roof. According to the media list suitable for many different chemicals e.g. iron chloride, hydrochloric acid, acetic acid, caustic soda, sul ...

Longitudinal Splicer Manufactured by FISHER+RÜCKLE