mbo f 520 used for sale

Choice of 2 x Francis Shaw K7 MK3 intermix, Total Volume: 320L, Useful volume 210L, Order number: 6061/1 and 6061/2, Year of manufacture: Oct 1986, NR2 Rotors, SSA type dust seals, Hydraulic drop door with linear actuator, Pneumatic hopper, Zamech full unidrive gearbox, Type: WD263-22.5, ratio 22.5:1. with 1000kW, 990rpm, 6000V motor. Rotor speed 44rpm. With modern starter panel, but without operator controls.

Formaco meat former press Model: FLL800/160/1 Serial: 1100 2002, Stainless, Meat former press

Industrial PC or control unit EST. technology consisting of various Flexcommander modules: -EST technology Flexcommander power supply 230V, part No.: 008741 -EST technology Flexcommander disk drive floppy, part No.: 0008740 -EST technology Flexcommander CPU, part No.: 0008734 -EST technology Flexcommander Ethernet, part No.: 0008738 -EST technology Flexcommander SLAVE PROFIBUS DP, part No.: 0008737 - EST technology Flexcommander MSR Channel1 + 2, part No.: 00087355 -EST technology Flexcommander MSR Channel1 + 2, part No.: 00087355 The Flexcommander modules are older year manufacture and used (see also images). The function was not tested, therefore no guarantee or warranty.

Product number:M15-4194 Cooling capacity:41,6 kW Number of fans:1 Refrigerant:R407C Refrigerant Content:10 kg Voltage:400 Volt Power consumption:16,5 kW Dimensions:2085 x 1230 x 2300 mm Weight:1013 kg Year:2012 Number in stock:2 piece(s) Very young and good LIEBERT air-cooled water chiller with free cooling capability (28,6 kW). Mentioned capacities are at an ambient temperature of 35°C and at 15/10°C (inlet/outlet) with ethylene glycol 30%. These chillers are equipped with an expansion tank and a water pump. Please visit also our website: used-refrigeration

1 x Farrel Bridge Model BR lab banbury mixer, Serial no. 91M7000, year: April 1991, Chamber volume 1.5litre pneumatic hopper and swing side discharge door, David Brown gearbox, 30kW DC variable speed motor and controls. Fully guarded with Key interlock system. Complete and in excellent condition.

Hydraulic radial engine Manufacturer Denison/Calzoni Type MR300D - F1N1N2S2NX 0401 / 46529, 742056 250 bar Used from Husky injection moulding machine type GL225 RS60/50

Gross bar scale for filling open bags from 10 - 50 kg, with feed paddle screw incl. drive 1.1 kW for coarse and fine current dosing, with pneumatic sack clamp (200 mm) and automatic bag drop, mounted on an elastic stand frame. Last used for the filling of construction chemical products; good condition, last calibration in 2014.

WEIBERT WJ-SAe-FR2 2.3 3-3.2 Formatschiebetisch: 2300 mm to 3200 mm) Cutting height: 103 mm Blade 90 °-45 ° swiveling. 315 mm Scoring unit: separate drive Milling spindle: swivel Blower RPM & #65279;: 1400/3500/6000 and 8000 min. Motor power: 5KW streaked 400V 50 Hz Saw: 4KW OPTIONS for an additional fee available! Integral safety rail 500 mm Left and right rotation Suction pipe with suction hose Degree grid system on the boom G & WJ-SAe-FR2 2.3/3.0/3, 2m SPECIAL PRICE PLEASE REQUESTS! OPTIONS for an additional fee available!

Koelle edge planing machine model FKF 51 is in good condition, ready to use. L x W x H = 3000 mm x 700 mm x 950 mm Weight approx. 200 kg Built in 1982 Engine No. 390 The rubber rings at the pressure rollers should be times replaced. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Load on the pivot around 41 t ISO container recording 10 / 20 / 30 / 40 foot Make: various renowned manufacturers Workshop review: 2015 various spreader: fix, telescoping, manually and with Tongs utensils for swap bodies Fully functional workshop overhaul and paint renewal upon request.

Key data: 30 , 28 , 110

Plant for the production of filament for use in 3D printers Capacity up to 10 kg/h consisting of 30 mm extruder, stainless steel trough, puller and winder with traverse guide

We can offer: Fischer + Krecke Type : Combi 31bb Year: 1980 Bag width 90 - 260 mm. Tube length 250 - 470 mm. Bottom width 40 - 140 mm. 2 unwinds and glue units for 2 ply bags With : Photocell for pre-printed reels

Universal milling machine. Table size: 1400mmx300mm. Longitudinal travel: 1200mm. Cross travel: 320mm. Vertical travel: 500mm. ISO40. Hure head. Speeds: 12. (40-1800rpm). Motor power: 7Kw.

KHS Seitz high vacuum filler for vicous products Type: Seitz wich with 12 filling valves solo machine complete recondizioned

Multiple lengths saw FAS 14 with 2 circular saw units per 2.2 kW, 3 x 400 V, 50 Hz. -maximum piece length 6000 mm -maximum cutting height 120 mm -maximum Board width 500 mm -Working height 700 mm -Feed speed approx. 0.2 m / sec -Feed drive gear motor 0.55 kW / 3 x 400 V, 50 Hz Built about 1965 Weight 1600 kg Engine No. 314 Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Batch horizontal mixer in standard steel version, lined inside with carbide, useful filling up to approx. 800 l.. Drive over 37 kW motor, Flender head gear and start-up clutch, equipped with 2 flanges for optional knife heads / choppers. Slingshot shaft with armoured Becker shovels (as good as new). Incl. basic frame for mixer, gearbox, fluid coupling and motor. Sandblasted and repainted.

We offer: Doka / Form-on smartPROPplus 20 550 new a 62.60€ / piece net Doka stacking rack 1.55 x 0.85m new 130.00€ ( 30 pcs in frame) Heavy load supports , galvanized DIN 1065 , at each extension length 20kn load -Load capacity min. 20 kN at each extension length (according to general building inspection approval Z-8.311-946) -Preservation of the value of the supports over many years thanks to high-quality production and galvanizing -fast and safe release of the clamped support due to optimized thread pitch -safe working thanks to squeezing and fail-to-back protection - They offer on 1 construction support ! If you have any questions, call Mr. Becker on 0176-700 44689 the sale and sale of scaffolding/formwork systems and construction machinery; Formwork restoration on fair terms. Company SFS Meisterbetrieb Andreas Becker e. Kfm., Tel. [07305-9562350],  ...

Bühler in Flowbalancer donor MAZF 15 (5 piece) 220 volt, 50 heart, Masch.Nr.: 544647 / 10 254 200 now available Mob. + 491715213204

1 x Francis Shaw model K2A MK4 Intermix Machine number 11242.8, Year June 1994, NR2 rotors, Working batch volume 27 - 36 litres Drop door with linear actuator, SSA dust seals, Pneumatic hopper, Hansen semi unidrive gearbox, Rating 150kw, 1475/32rpm, With ASEA 152kW, 1510rpm DC variable speed motor and controls.

2 - K machine