mbo f 520 used for sale

Dough laminator Dimensions: 2550x1000x1280mm Electric power: 0.75kW Voltage: 220V 50Hz Conveyor belt dimensions: 500x1980mm Distance with adjustable roller: 1-45 mm Weight: 220kg

Table dough laminator Ital Form Dimensions: 2350x870x620mm Electrical power: 0.4kW Voltage: 220V 50Hz Distance with adjustable roller: 1-35 mm Weight: 150 kg

Table dough laminator Ital Form Dimensions: 2350x910x650mm Conveyor belt size: 500x1980mm Distance with adjustable roller: 1-40 mm Electrical power: 0.55kW Voltage: 380V 50Hz Weight: 130 kg

Manufacturer: Block-trafo EMI Filter , Type: HLD110 500/75 520 V AC 75A AC 50-60 Hz , Sale without warranty: UR=520 V AC, No right of return: HPF 25/085/21, Installation height: 75A AC,

Mobile labeling machine for round bottles. Machine incl.: hot stamp system , 3-roller system. PLC: SIEMENS Simatic S7-300 Label dispenser type Pagomat 15/120E.

Table sheeter Fritsch Mini 520 0.5Lx0.5L Year of manufacture: 2013 Machine technically checked-cleaned with dry ice. Belts have signs of wear. Machine tested

Sheeter Fritsch Rollfix 3WK 520 for all doughs for rolling out and touring Dough sheeter mobile with hand and foot control Connection 400V, 16A-CEE plug Used machine

PLC control, electronic module, noise filter -Block Part.No.: B 0901031 -UR: 520 V 50-60 Hz 30 Aac -Dimensions: 270/70/H95 mm -Weight: 1.7 kg

Bonding/crimping of toe caps; with preheating device; Spray gluing device (latex adhesive) and pressing device

Four fabric inspection machines are available (1) Menzel WOB 1.600mm fabric inspection machine, working width: 1600mm (2) Menzel WOB 3.200mm fabric inspection machine from Hoftex, working width: 3200mm (3) Bauch Maschinenbau CB-WU 380 fabric inspection machine (4) Maag CT 5206-Ah fabric inspection machine. On-site viewing is possible.

Key data: 600 mm, 250 mm

Surface Grinding Machine Jung JF520 +Supromatic Built in 1979 The machine was completely overhauled in 1999 Grinding length: 600 mm Grinding width: 250 mm Operating hours: 15000 h Good condition

Marine gear box Ratio 4:1

Inspection and punching machine inspection-and punchmachine

Technical data: Saw blade diameter: 520mm Mitre: 90° / 45° / 30° Drive capacity: 1.6 / 2.8 kW Dimensions: WxDxH 1520x1520x1560mm Working height: 900 mm Weight: 1250kg

24 months warranty TOP value for money . Robust table sheeting machine for all kinds of dough, and marzipan suitable for sheeting and laminating PVC conveyor belt, quick and easy to clean Speed: 50 cm / sec Band width: 520 mm Conveyor belt length: 670 mm on each side Foldable table left and right Roller adjustment from 1 mm to 30 mm Engine power: 0.55 kW 220/380V - 3Ph - 50 Hz - 16A-CEE connector Folded dimensions: 850 x 940 x 670 mm WxDxH Working dimensions: 1460 x 940 x 580 mm WxDxH Weight: approx. 100 kg additional performance of bak-tec including: DGUV V3 tested (formerly BGV A3) with certificate

24 months warranty TOP value for money . Robust, mobile base dough sheeter, mounted on castors with locking For all types of dough (or marzipan) to roll out and laminating PVC conveyor belt, quick and easy to clean Speed: 50 cm / sec Band width: 520 mm Conveyor belt length: 980 mm on each side = 1960 mm Foldable table left and right Roller adjustment 1 mm up to 30 mm Engine power: 0.55 kW 220/380V - 3Ph - 50 Hz - 16A-CEE connector Folded dimensions: 1200 x 1030 x 1750 mm WxDxH Working dimensions: 2610 x 1030 x 1070 mm WxDxH Weight: 158 kg additional performance of bak-tec including: DGUV V3 tested (formerly BGV A3) with certificate

Cake slicer, Ostali, TPS 520

Offer 24419 Specifications: - Roll diameter 520 mm - Projection 510 mm - Max. passage height 420 mm - Table size 750 x 800 mm - Table left + right swivel 15 / 30 ° - Table height from the floor 1020 mm - Saw blade length 4120 - 4200 mm - Saw band width 20 - 25 mm - Stepless cutting speed - level 1 18 - 160 m/min - Stage 2 240 - 2280 m/min - Pneumatic connection 6 bar - Drive 400 V / 5.5 kW - Weight approx. 1100 kg - Space requirement approx. W 1200 x H 2200 x D 900 mm - with: - table feed - Saw blade welder in machine stand -Grindstone - Scissors + air pump -Lighting

2 PCS - TWIN DISC MARINE GEARBOX - MG 5202 DC - 5.04:1 - COMPLETE WITH NEW COOLERS AND HYDRAULIC HOSES ALSO AVAILABLE FOR SALE PER UNIT

The scope of delivery includes: 01x Surface-mounted shelf rack, used Material colour: hot-dip galvanised Total depth: approx. 2,520 mm (lifting rod direction) for double rows: 2x 1,100 mm Inner depth: approx. 2,517 mm Overall width: approx. 1,120 mm (crossbar direction) Bearing rod diameter: 30|1.50 mm Frame height: approx. 30 mm Mesh size: approx. 68 x 45 mm Weight | Pcs.: approx. 30,83 Kg Internal designation: GR-114 Note: The grating may have damage, scratches, dents, welds. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Wabäma Economy Plus bread cutting machine with long bread inserting tray suitable for 52cm of bread. -with sickle knife -with oiling -Built in 2007 -Cutting width adjustable -three-phase current 400 volts -Rated power 1.9 A -Control voltage 24 volts -Operating voltage 24 volts -Weight 285 kg

Max. size= 52 x 37 cm, Availability= 052025, Paper Size Max:- 373 mm x 520 mm Paper Size Min:- 90 mm x 130 mm Paper Thickness:- 0.04 mm - 0.3 mm Stream feeder conventional dampening, quick action plate clamps pneumatic compressor S/N 1929 Dimensions : 200x135x175(H)cm Weight 1900 kg LOT Loaded in truck or container

GEARBOX INFO Listing ID 20102 Make TWIN DISC Model MG 5202 SC Serial No. 3AE 190 Power RPM REDUCTION 2.48:1 General Info Condition Runner Application Marine Weight (kg) 750 KG

Type: IMAX 520 Working with boneless meat Product width: 520 мм Cycles: 15 to 60 per minute Feed: max. 60 mm Product height: 130÷230 mm Number of needles: 200 (2 х 100), 4 мм Brine pressure: 0,5-4,5 bar Machine charging height: 1170 mm Compressed air: 6bar Voltage: 230/400 V, 50/60 Hz Connection: 10,0 kW ; 23 А Rotary brine filter DF 510 Machine dimensions in mm: Length: approx. 2100 Width: approx. 1350 (about 2500 mm with filter) Height: approx. 2300

Key data: 1100 , 198 , 40

Manufacturer: Krauss Maffei Type: KM 110 - 520 C2 Year of construction: 2003 Control: MC 4 Closing force: 1100 kN Closing type: Hydraulish Tie bar spacing: 470 mm x 470 mm Plate size: 745 mm x 770 mm Tool height: min 300 mm Opening distance: 600 mm Plate spacing max.: 900 mm Screw: 40 mm Lifting volume: 217 ccm Injection weight PS: 198 gram HP Injection pressure: 2377 bar general Engine: 18.5 kW Heating: 13 kW Dimensions: 4.5 m x 1.5 m x 2.2 m Weight: 6000 kg Screen text: German / English Additional equipment Robot interface Core train: x1 Accu

Maximum turnerable diameter: 1040 mm Turning diameter above the wagon: 620 mm Maximum workable length: 5200 mm Spindle power: 40 kW CNC ECS Optical line measurement system Maximum flow between tips: 10 tons Machine complete with chip evacuator, 4-position hydraulic turret, safety shelters in compliance and spindle 3-jaw hydraulic self-centering AUTOBLOCK; Various accessories available (tool case, stretchers, lunettes...) EC 2018 remarking possibility

Cutting height: 205 mm Motor output: 11 kW cutting width: 450 mm Cutting length: 5200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Arburg 520C-2000-675 (154) without funnel General information Item number: 154 Availability: In stock Year of construction: 1998 Brand: Arburg Specifications Spray weight: 240 g Clamping force: 2,000 kN Screw diameter: 45 mm Spray pressure: 2500 bar Spar spacing: 520 x 520 mm Clamping plate size: 715 x 715 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 126766 h Weight: 6630 kg Dimensions: 5.6 x 1.7 m Euromap: Yes Air valve: Yes

Heidenhain LS 403 ML 270 mm 226 520

Heidenhain Heidenhain ND780 520 010-01

From the roll to the bag! Manufacture bags according to desired format and fill and seal with the product. Description - Optimal price-performance ratio - Easy operation and cleaning - Low maintenance - Stainless steel version (1.4301) with safety Plexiglas - Control is carried out by a PLC, color touch display with intuitive operating software - Fast, tool-free bag format change - One format included Specifications - Intermittent heat sealing for hot sealable films - Film thickness: 0.04mm to 0.15mm - Film width: 180-520mm - Bag dimensions (LxW): 60-350mm x 70-250mm - Cycle rate: 15-50 bags /min. (depending on VE) - Electrical power: 3.5 KW / 220V / 50(60) Hz - Compressed air consumption: 700 l/min at 6 bar - Dimensions (LxWxH): 1540mm x 1160mm x 1600mm - Weight: 450kg

Dimensions (L/W/H): 7300x1600x2600 mm Weight: 5500 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Arburg 520C-1300-350 (163) with bimetal plasticizing unit General information Item number: 163 Availability: In stock Year of construction: 1999 Brand: Arburg Specifications Spray weight: 194 g Clamping force: 1,300 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 520x520 mm Clamping plate size: 715x715 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 95616 h Weight: 6380 kg Dimensions: 5.1x1.9 m Funnel: No Core train: Yes Euromap: Yes

clamping force: 1.300 kN injection volume: 230 cm³ screw diameter: 45 mm platen size: 685 x 685 mm Condition: used, Specification: injection moulding machine for TPE - used including Koch dosing unit clamping unit: - clamping force: 1.300 kN - heating platen size: 685 x 685 mm - Clear distance between tie bars: 470 x 470 mm - Mould installation height min.: 250 mm - Distance between platens max.: 900 mm - Opening stroke max.: 650 mm - Ejector stroke: 225 mm Injection unit: - Screw diameter: 45 mm x 18D - Injection volume max.: 230 cm³ - Injection part weight: 210 g/hp - Max. injection pressure: 1,670 bar - Screw circumferential speed: 75 m/min - Cylinder heating: 4x 2,200 W - Nozzle heating: 600 W - Connection value: 3x 400 V, 50 Hz - Electrical connection (back-up fuse): 100 A - Weight approx.: 6,3 ...

Manufacturer: Karl Klink Model: RKW 25-3800-520 Weight: 50t Year of construction: 1990 Machine no.: 3048 & 3047 General / technical data: Chain broaching machine for continuous outdoor clearing Pulling force: 25.000kg Cutting speed: 7.2 / 8.1 / 9.6m/min Maximum tool length: 3520mm Passage width: 520mm Tool carrier clamping surface: 3520 x 460 mm Dimensions: 12.300 x 6.400 x 4650mm Power Supply: 380V 50Hz/110kW Accessories/ Special equipment: - 6 tool carriers for tool change - Machine documentation Remark / General The machines are in good condition. The machines are dismantled with us in the Bearing. The total volume of the plant comprises several trucks (approx. 70 tons per machine). The machines have produced connecting rods for passenger car diesel engines. Chain scrapers are designed for use in mass production. The continuous ( ...

Top and bottom case sealing / taping machine with average production output up to 1000 boxes per hour / 16 boxes per minute and box transfer speed: ·~22 mt/min ~22 mt/min; side mounted drive arms; handwheel for adjusting height. Comes with outfeed roller conveyor. Suitable for cardboard boxes and cases of following sizes: L: 150mm (min) - max (not set) W: 100mm (min) – 500mm (max) H: 100mm (min) – 500mm (max) Tape width: 25mm to 50mm (max), max foil roll DIA: 360mm, reel DIA: 76mm, fitted with Emergency Stop button. Year: 2011 Machine is in excellent overall condition with little use – originates from and established Pharma production site in Europe. Size: L: 1.800mm x W: 1.200mm x H: 1.600mm; W/T: 300kg; comes with stainless steel roller conveyor (machine size: euro-pallet x H: 1.500mm, W/T: 40kg);

SCM TECH Z5 5200 CNC woodworking center was built in 2015 in Italy by SCM Group S.p.a. This extremely efficient machine is used for precision machining of wood and wood-based materials (chipboard, plywood, etc.). It enables a number of complex operations to be performed, such as vertical drilling, horizontal drilling, grooving with a saw blade along the X axis and standard milling. The machining process is performed in 5 axes by means of a work head located inside a movable machining station. It consists of a boring head with vertical/horizontal spindles and integrated blade and electro-spindle with automatic tool exchange system. The machining station moves over a work table with suction cups that ensure secure holding of the workpiece during machining. On the inner base of the work table, in turn, there is a device designed for easy shavings removal. Each axis is driven by high-powe ...

Cutting width: 520 mm Cutting height: 310 mm Working height: 1000 mm Cutting speed level 1: 25 - 85 m/min Cutting speed level 2: 120 - 500 m/min Cord edge: 3880 mm Saw band width: 3 - 16 mm Table size: 600 x 500 mm Table swivel range (in 4 directions): 15° Motor power: 1.5 kW Blade welding device: 2.4 kVA Machine dimensions (L x D x H): 1300 x 760 x 2140 mm Weight approx.: 500 kg Equipment: - Band saw blade - Stepless cutting speed - Reduction gearbox - Belt welding device with annealing unit - Machine light -Scissors - Grinding station - Chip brush - Blow-out device - LED digital display (to indicate the cutting speed) - Table with stop groove - Angle stop - Parallel fence

Mobile semi-automatic taping machine which seals fixed-format boxes with adhesive tape (upper and lower parts). Output: 1000 boxes/h.

turning diameter: 1040/1900 mm turning length: 2000/3000/1250 mm swing diameter over bed slide: 740 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Make: EST-Ticino type: 520/2000 distance between centers min/max: 2000/3000 mm center height 520 mm Max. turning diameter over bed 1040 mm Max. turning diameter over support 710 mm max. turning diameter/length 1900 x 1250 mm spindle passage 135 mm with 3 jaw chuck with 4-jaw chuck quick change holder in very good and immediately ready condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

8 Color Stack UV Flexo Printing Machine Overhauled 2020 with installation IST MBS 7 UV system in 2020. Substrates: OPP,BOPP,PET,PVC,OPS,paper,aluminium foil. Print width max 560 mm, Material width max 580 mm 8 flexo printing units Speed 200 m/min, Camera (E+L) Register control (E + L

Timing belt pulley, slewing ring, -Slewing ring: with toothed belt pulley -Slewing ring: Ø 520 mm -Pulley: Ø approx. 370 mm -Belt width: 80 mm -Mounting: Bolt circle Ø 490 mm Ø 18 / M16 -Dimensions: see photos -Overall dimensions: Ø 520 x 200 mm -Weight: 79 kg

Arburg 520C-2000-800 (193) Description with conveyor belt, bimetallic screw General Information SKU: 193 Availability: In stock Year of construction: 2005 Brand: Arburg Specifications Injection weight: 434 g Clamping force: 2,000 kN Screw diameter: 55 mm Spray pressure: 1650 bar Tie bar spacing: 520x520 mm Clamping plate size: 728x728 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 80000 h Weight: 7300 kg Dimensions: 6x2 m Funnel: No Core train: Yes Euromap: Yes

clamping force: 6500 kN injection volume: 2011 / 323 cm³ screw diameter: 80 / 45 mm platen size: 1450 x 1350 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, DEMAG ergotech 650-5200-610 incl. handling injection unit 1: - Screw diameter: 80 mm - injection volume: 2.011 cm³ - weight: 1810 g injection unit 2: - Screw diameter: 45 mm - injection volume: 323 cm³ - weight: 290 g Clamping unit: - Clamping force: 6500 kN - Centring: 200 mm - Platen size: 1450 x 1350 mm - Mould size: 1000 x 910 mm - Mould thickness min.: 450 mm - Mould thickness max.: 950 mm - 2x core pull - Handling: Yes - Voltage: 3x 400V, 50Hz, N, PE - Total power: 245 kW - Dimensions L/W/H: approx. 10,100 x 5,500 x 5,000 mm - Weight approx.: 36,000 kg Further DEMAG plastic injection mould ...