mbo f 520 used for sale

Multi-floor continuous furnace Daub CCTO 20.96.6 Automatic Hanseat tunnel kiln Model: CCTO 20.96.6 Automatic Hanseat Multi-floor continuous furnace Daub CCTO 20.96.6 Automatic Hanseat Multi-storey tunnel oven of Daub type CCTO 20.96.6 with thermal oil system with 6 floors incl. hinge plates for sale. - 6 floors each 2000mm wide and 9600mm long - Total baking area 115.2 sqm - Lights passage on floor 180mm - Steam zone 1200mm - Temperature zone classification stove 1- 3 is top and bottom heat together - Temperature zone classification stove 4- 6 is top and bottom heat separated - Furnace weight approx. 40 tons - with 6 pull-off trolleys including 12 pull-off boards - Wagon crawlers - with thermal oil boiler - with expansion tank and drain tank - Oven is in operation and can be visited on request Metrics: 3000mm Wide 10360mm Long 3250mm High

Ladies and gentlemen, Here we offer a diesel trucks of the company Steinbock boss. Capacity: 14,000 kg Engine: Perkins Year of construction: 1992 Lifting height: 5000 mm When the stacker the Achschenkenlager is broken (the left rear wheel is wrong) Please call for more info, pictures or visits. 01773879144 With friendly greetings Subscriptions

1 pc flame pretreatment system with electronic control 1 pc EF 600-1 Burner control consisting of Electrical control with ignition and monitoring device for 1 pc burner, control electronics, control panel with plain text display, Emergency stop setup and interface for external control Mechanical control with Safety valves, gas/air mixers, thermoanemometrial mass flow meters for air and gas, Engine valves, pressure monitors for overpressure and vacuum monitoring and supply air blowers. 1 pcs C24-2300 Film burner, 2200 mm working width, adjustable up to min. 1000 mm with connections for water cooling and water-cooled double T-beam 1 pc spare parts consisting of 2 earth replacement electrodes and 1 replacement fabric Power supply : 400/230 V 50 Hz, 2.5 kVA Gas supply : Natural gas 75 – 100 mbar Heat output : max. 400 kW Gas consumpt ...

Hardware drill Ruchser RU EBL2, 5-S Masch. No. 00664-2-96 Weight approx. 700 kg Built in 1996 L x W x H: 350 x 80 x 130 cm The machine is in good condition, ready to use. Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Storage tank storage tanks of liquid fertilizer AHL / ASL tank - containers - fertilizer warehouse 1. used storage containers AHL tank ASL tank liquid fertilizer tank 30,000 litres. The tank complies with the DIN of 6616, owns 2 caliper feet, is empty inside and out and cleaned, incl. ladder. D = 2.50 m - L = approx. 6.80 m. The container receives incl. leak detector in the protection box mounted a new plastic inner sleeve - resistant storage of liquid fertilizer -. The plastic inner sleeve has a "General Building Inspectorate approval" Z-65.30-466 and makes suitable and approved for the storage of liquid fertilizer AHL as well as NOx reduction agent AUS 32 (AdBlue). The price is ex-works - free charged.

1 pieces. tanks 30,000 litres, fuel oil tank fuel tank fuel station gas station home service station storage tank storage tanks Court gas station steel tank according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 600 with domed lid, is used, cleaned, overhauled and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted RAL 7042 - traffic-grey. (Other RAL colours are possible upon request!) L = 10,00 m / D = 2.00 m / weight CA. 5,7 tons. / free charged ex works ...

USED TEFSA EHR 1200-16 FILTER PRESS REF.: C5899 Used EHR-1200/16 filter press manufactured by TEFSA. Currently it is provided with 19 plates of 1200x1200 mm but it has a capacity of 29 plates General characteristics: Manufactured by TEFSA Model EHR 1200-16 Type Press filter Year built 1993 Weight 13.300 kg With complete documentation Overall dimensions: Total length: 7,305 mm Total height: 2,000 mm Total width: 2,000 mm General characteristics: Working length: 1900 mm Hydraulic central motor power 5.5 kW Turning motor power: 1.5 kW Working pressure: 16 bar Closing pressure: 390 bar Technical characteristics: Work pressure 16 bar No. of plates 19 (ampliable a 29) Panel surface 1200x1200 mm Filtration area 40 m2 (ampliable a 60 m2) Volumen de torta 602,3 dm3 (ampliable a 920 dm3) - espesor 30 mm Hydraulic equipment 5.5 kW

Built in 1991 Size max 700 x 1,000 mm min 150 x 200 mm Buckle width min 60 mm Speed max 25-160 m / min Suction equipment continuous stream feeder counter IZVA 341 1st folding unit: 4 buckle plates rear-mounted slitter shaft 2. rear-mounted slitter shaft noise prevention 2nd folding unit: 4 buckle plates rear-mounted slitter shaft noise prevention folding 3rd unit: 2 buckle plates rear-mounted slitter shaft delivery: belt delivery

HEIDELBERG Stahlfolder RFH 66/4 BCUH of 2007 16 pages combined. International - English & German fold A folding machine of 66 cm, config; -1St unit 4 x. Pockets, round pile feeder + 3 x. Knives KTL = 16 pages - int. English or German folds > > Option: VF-66 2006 - Mobile knife / total fold 32 pages < < Delivery St. Unit TSH 70 presser stacker Condition; VERY GOOD condition, immediately available, Can be lakes in our factory at Strasbourg FR

Vertical Bevel-Cutting Machine Manufacturer: Hyma Model: VSL.A.75 Manually operated roller table with aluminium covered table-too Hand-wheel operated rest-plate with ratchet mechanism for repetitive cutting of same width: 0-130mm Inclinable cutting section with four dynamic balance blade-wheels, each suspended between two adjustable bearings Motorised angle-adjustment for cutting section: +/- 60 degrees. Electric blade drive motor Twister double-edge ground bank knife for cutting in forward and reverse movement of roller table Blade tension control with indication lamp and automatic cut-off on blade slackness and breakage Manually height-adjustable blade guard and fine-adjustable blade guide rollers above and below table Friction grinding apparatus with two adjustable cupstones Electrical control box mounted on table front, adjacent to operator Standard dimensions: Cuttin ...

Used pressure leave filter of diatomaceous earth, type Ecofilter, made by TMCI Padovan, capacity 10 m3, model TV3884.85. Tank volume 900 L, pressure 8 Bar. Temperature -10 +50°C. New 1985.

PVS 125 H micro cut Inotec drive power 15 KW product performance from 300 kg to 900 kg an hour for various products pesto sauces soups Majnäse and similar

AUTOMATIC DOVETAILING machine OMEC 750 I second hand machine machine is utilised to indent dovetails for drawers and various furniture elements CE compliant machine: YES machine also for curved pieces instruction and certification booklet: YES tool / cutter: YES volt. 380/50

Workbench width: 2,860 mm / Height: 900 mm / Workbench depth: 800 mm We offer you here a used workbench frame of the manufacturer Vogelsang for sale. Technical data for the workbench frame: Manufacturer: Vogelsang Type: NS Included in delivery are: 02x workbench stand, new Material colour: sendz. galvanized Stand height: 900 mm Stand depth: 800 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x workbench trusses, used Material color: orange Box profile: 110 x 50 mm Clear width: 2,700 mm 08x safety pins, used Version: completely galvanized The pictures serve to clarify the material. The material colour may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days.

Glue press Etienne Format L x B: 3800 x 2700 mm Window frame press pneumatic Weight approx. 890 kg Year of construction 1980 The press is in good condition, ready to use. Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Workbench width: 2,860 mm / Height: 900 mm / Workbench depth: 1,000 mm We offer you here a used workbench frame of the manufacturer Vogelsang for sale. Technical data for the workbench frame: Manufacturer: Vogelsang Type: NS Included in delivery are: 02x workbench stand, new Material colour: sendz. galvanized Stand height: 900 mm Stand depth: 1,000 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x workbench trusses, used Material color: orange Box profile: 110 x 50 mm Clear width: 2,700 mm 08x safety pins, used Version: completely galvanized The pictures serve to clarify the material. The material colour may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days.

Qty. 1 Second-hand foil rolling mill plant Mfc.: World Co. (Japan) Type: 6-Hi – Non reversing mill Built: 2002 Application: Copper foil Width: 400 – 700 mm Coil weight: Max. 5 Ton Thickness Entry: 100 – 200 microns Exit: 5 – 100 microns Speed: 0-400/800 m/min. Thickness X-Ray unit AGC system Variable Crown Control Hydraulic servo equipment Main motor power: 200 kW DC Slitter line Mfc.: IHI Width: 150-700 mm Thickness 5 – 50 microns Degreasing line Mfc.: World Co. Strip width: 700 mm Thickness: 10-50 µm Treatment line Mfc.: Kawasaki Built: 2005 Width: 700 mm Thickness: 10-50 µm

BARATTI FRAMED VACUUM PUMP WITH SUCTION FILTER AND SILENCER Fabr. -No.: 216 105 // Type: ATMOS V4-KR Var. 0102 Equipment / Additional information: Roots Blower Section. oil and wear-free compression, air-cooled, V-belt drive with tension rails and belt guard and two-stage exhaust silencer Incl. the following accessories: -Vacuum relief valve -saugs. Fine filter 3" -Connection piece internal thread 3" - Rohrfederman. -1..0 bar, filled with glycerine -Drive motor Blower data: Max. negative pressure: 500 mbar, abs. Suction volume: 440 m3/h Fan speed: 2920 rpm Noise level: approx. 79 dB (A) Engine data: 7.5 kW, 2930 rpm, 400/690 V, 50 Hz, IP 55 ISO class F, B3, KKL

1 x 8 sqm vacuum Rotary filters Padovan, BJ. 1985, in good condition, always perfectly maintained, complete with precoat tanks, 2 x vacuum pump and control, available immediately

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 100,000 litres Diameter: approx. 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilize ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 80,000 litres Diameter: approx. 2,900 mm Length: approx. 12,780 mm Weight: approx. 15,750 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer ...

Horizontal grinding optimum surface grinders ELB - 6375 ND - PLC Second-hand machine Surface grinders - horizontal ELB optimal 6375 ND - PLC Second-hand machine overhauled 2016 Surface grinders - horizontal ELB-SCHLIFF optimal 6375 ND - PLC Second-hand machine Grinding length: 600 mm Grinding width: 375 mm Workpiece height: 375 mm Table clamping surface: 600 x 350 mm Grinding wheel dimensions: 300 x 50 mm Grinding spindle motor: 4.7 kW Table speed: 2-30 m / min Grinding wheel speed: 1450 RPM Total power: 12kW Weight approximately: 3.5 t Space requirement approx.: 2.8 x 2.5 x 2.5 m Part overtaken 2016 + 12 months warranty, condition Control with touch screen new Paper machine Magnetic Chuck 600 x 350 Automatic table dressing with compensation 1 flange Items put up Installation / commissioning / transport

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 60,000 litres Diameter: approx. 2,500 mm Length: approx. 12,680 mm Weight: approx. 10,700 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 50,000 litres Diameter: approx. 2,500 mm Length: approx. 10,700 mm Weight: approx. 9,200 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer  ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 40,000 litres Diameter: approx. 2,500 mm Length: approx. 8,720 mm Weight: approx. 7,800 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer p ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 30,000 litres Diameter: approx. 2,000 mm Length: approx. 9,940 mm Weight: approx. 5,500 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer p ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 25,000 litres Diameter: approx. 2,000 mm Length: approx. 8,390 mm Weight: approx. 4,700 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer p ...

REVERS OSMOSIS APPLICATIONS: MILK CONCENTRATION, WHEY CONCENTRATION, WASTE WATER CONCENTRATION STRAINED YOGURT, QUARK, CAPACITIY: FROM 5.000 LT TO 50.000 LT PER HOUR FULLY AUTOMATION CONTROLLED WITH PLC AND TOUCH SCREE PANEL TURN KEY PROJECTS

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 20,000 litres Diameter: approx. 2,000 mm Length: approx. 6,840 mm Weight: approx. 4,000 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer p ...

ULTRAFILTRATION PLANT CAPACITY: FROM 5.000 LITER TO 30.000 LITER PER HOUR USED FOR PROTEIN CONCENTRATION APPLICATIONS: UF CHEESE, FETA CHEESE, MILK PROTEIN CONCENTRATE, WHEY PROTEIN CONCENTRATE FULLY AUTOMATION CONTROLLED WITH PLC CONTROL PANEL AND TOUCHSCREEN

Full gate clamping cars Möhringer among the REF. No. 262-1492 L x W x H: 280 x 120 x 180 cm Weight 3000 kg Built in 1984 Price EXW with full frame saw Boegli MARA-2 (Ref. No. 262-1492) 19'800 EUR Excl. VAT The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Full frame saw Boegli MARA-2 with Electr. Switchgear with associated Chuck Wagon (REF. No. 262-1491) Masch. No. 373 Through root á 600 mm With hydr. Sheet tensioning device L x W x H: gate 260 x 200 x 450 cmm Weight approx. 1200 to Built in 1978 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Annealing oven box furnace KU500 all4-PCB from the Switzerland The investment is for the production of thin-film - photovoltaic modules CIS / CIGS (module size 1250 x 650) bildungsportal. The task of the furnace is to anneal coated substrates in the production process. Cycle time 50 sec (first stage) Year of manufacture 2010 300 running BRA, mint already properly decomposed, which is not the original on the images, which has eight dry fan New price 306.000,-net

Abbot dressing plant for chemical (Basic) media (ammonium sulphate) the plant has been used year 2010 (pump 2012) 1 x, then the company has been closed with wild diaphragm pump with ARTA dry clutch DN15 - DN150 complete documents, certificates, declarations of conformity of the individual components possibly Verohrung to but not part of the sale 2011 was once again a wild pulsation dampers for 2800,-€ upgraded Material - new price 17.000,-€, used only by the finest components from ARTA, Düperthal, wild

We offer you here a used Workbench rack for sale. Dimension: Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 800 mm Technical data for the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in delivery are: 02x workbench stand, used Material colour: sendz. galvanized Stand height: 900 mm Stand depth: 800 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 02x workbench trusses, used Material color: gray Box profile: 110/140 x 50 mm Clear width: 1,400 mm 04x safety pins, used Version: completely galvanized The pictures serve to clarify the material. The material colour may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days.

4 plies, micro perforating units, web guide system, 2 colour tail end printer, photo cell for preprinted paper, tube packeting station

We offer you here a used Workbench rack for sale. Dimension: Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in delivery are: 02x workbench stand, used Material colour: sendz. galvanized Stand height: 900 mm Stand depth: 600 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 02x workbench trusses, used Material color: gray Box profile: 110/140 x 50 mm Clear width: 1,400 mm 04x safety pins, used Version: completely galvanized The pictures serve to clarify the material. The material colour may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days.

Milling Centre for EPS foams may be also applicable for other foams such as XPS, PUR, or other applications after conversion Platen length: 1000-1250 mm Plate thickness: 500-1250 mm Plate thickness: 40-250 mm including input and output; Unloading and stacking the plates stack Documents are available. A visit is possible after agreement at any time. Other machines and components for the production and processing of foams are available.

The new DYNAJET surface cleaning system DFS 500 VAC: With 500 bar and integrated Extraction according to the Venturi principle, the DFS 500 VAC is the ideal tool for fast and efficient cleaning of large areas such as.B. industrial and hall floors, building Forecourts or courtyard entrances. The suction according to the Venturi principle, in which an additional jet of water creates a Negative pressure is generated, which tears the dirty water with it, makes an additional Wet vacuum cleaner with separately required power supply superfluous. Efficient and powerful: Hot water version up to 95° C. Connection for sewage hose on the integrated extraction system. Nozzle carrier for accommodating two high-performance nozzles Form D for maximum cleaning performance. Stepless adjustment between cleaning and extraction capacity Mobile and robust: Three steerable wheels for super s ...

Suction register: Make : Wolf Built: 2004 Dimensions: 3500 x 1500 x 650 mm and 2500 x 1500 x 650 mm (approx. LxHxD) only 4 pieces left in stock In addition, we offer: Exhaust air unit with exhaust air pipe and deflector hood depending on size. Rectangular sewer pipes 1200 x 600 mm, unit price € 50,- net from location. We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Hydraulic stainless steel freezer block cutter (guillotine) with loading for meat/fish/vegetables/cheese. NEW MACHINE IMMEDIATELY AVAILABLE FROM STOCK 2 pieces cutting knife 5 pieces cross cutting knife Cutting room: 460 x 220 x 750 mm Cutting temperature: up to -25° C Cutting capacity: up to 1,600 kg/h Push button control Hydraulic loading Machine dimensions: Width: 90 cm Length: 220 cm Height: 185 cm Weight: 550 kg Connection: 5.0 kW Voltage: 400 V, 50 Hz CE mark: yes

S5 - used 50 m³ / 50,000 litre steel tank, underground tank, firefighting water tank, water Container, water tank. In good condition, as underground tank or for aboveground use, steel tank, storage tank, water tank, firefighting water tank. Exterior with a new coat of bitumen. volume: 50 m³ / 50,000 litres material: stainless steel tank, single-walled dimensions: appr. 2.5 m diameter x 10.0 m length weight: appr. 8.0-10.0 t The container is used, emptied inside and has been professionally cleaned. According to the age traces of use are present. The container could be used as storage tank for water, waste water, sewage, liquid manure, seeping juice, canola oil, rain collection tank, water cistern, water tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update a ...

Qty. 1 Second-hand aluminium foil rolling mill plant Mfc.: Robertson, Kampf, Schmutz, Nishimura, Waldrich-Siegen, Otto-Junker Built: 1962 – 1989 Foil width: 850 mm Entry thickness: 0.4 mm Exit: 2 x 7 microns Scope of supply: Roughing Foil rolling mill: 4-Hi Intermediate foil mill 4-Hi Finishing foil mill 4-Hi Slitters – Qty. 4 Roll grinders – Qty. 2 Annealing furnaces – Qty. 4 Charging car INDIVIDUAL ITEMS CAN BE SOLD

Various air-, oil- and fuel-filters, starter engines and alternators to be sold as package after inspection and price negotiations. Please arrange appointment with Mr Kottowski

Output: 60 cups/Min. Filling system: volumetric 100-250 g.Optional up to 1000g. Cup size: rectangular 110 mm of diagonally, or 110 mm diameter. Closure: snap on lid or seal sheet. Product: Margarine, lard, salad, etc. Used machine, complete overhauled.

Dimension: Width: approx. 2,900 mm Height: approx. 900 mm Depth: approx. 800 mm Technical data for the workbench frame: Manufacturer: Meta (Thyssen) Type: Multipal S Included in delivery are: 02x workbench stand, used Material colour: sendz. galvanized Stand height: 900 mm Stand depth: 800 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 02x workbench trusses, used Material color: orange Box profile: 85 x 50 mm Clear width: 2,700 mm 04x screw material, used consisting of each: 01x Screw 01x Washer 01x Nut The pictures serve to clarify the material. The material colour may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days.

Stations: Round table with 8 forming cells Paper forwarding and folding device Date stamp station Volumetric dosing with trough End folding station Pressing station Evacuation to off-conveyor Off-conveyor 1200 mm long Dosing station in food safe design Electric control in its own cabinet CE conform Package format: 75 x 50 x 35 mm or 100 x 75 x 53 mm or 120 x 80 x 60 mm Dosing range: from 250 to 500 g. Option up 1000 g. Output: 80 packages / min.

Volumetric filling system: 100-250 g. Output: 40-80 packages / min adjustable Package size: 75 x 50 x 35 mm or 100 x 75 x 35 mm Product: Butter, margarine, etc. Machine used, completely overhauled.

Performance: 80 packs / min. Dosing range: 100 to 250 g. Products: Butter, margarine, etc. Used, completely overhauled.

Dimension: Width: approx. 2,900 mm Height: approx. 900 mm Depth: approx. 800 mm Technical data for the workbench frame: Manufacturer: Meta (Thyssen) Type: Multipal S Included in delivery are: 02x workbench stand, used Material colour: sendz. galvanized Stand height: 900 mm Stand depth: 800 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x workbench trusses, used Material color: orange Box profile: 85 x 50 mm Clear width: 2,700 mm 08x screw material, used consisting of each: 01x Screw 01x Washer 01x Nut The pictures serve to clarify the material. The material colour may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days.