134,634 used machines on RESALE, but how to find them? Machine Search
CONTROLS PLC SIEMENS S7 PRESS DESIGN drive system: link drive feedstock transport direction: left to right SLIDE total force (nominal): 80 to stroke: 50 mm stroke rate (max.): 80 /min COUNTER RAM nominal force: 22 to stroke: 8 mm V-RING nominal force: 25 to stroke: 15 mm TOOL DIMENSIONS lower table (left-right): 420 mm lower table (front-back): 420 mm upper table (left-right): 420 mm upper table (front-back): 420 mm shut height max.: 220 mm ram adjustment: 80 mm distance between columns (H-frame): 450 mm passline opening (free passage in side columns): 200 mm OVERALL SPECIFICATIONS (COIL LINES) sheet width max.: 180 mm sheet thickness max.: 5 mm feed velocity max.: 999 m/min STRIP-FEEDER feeder type: roll feeder sheet width max.: 180 mm sheet thickness max.: 5 mm feeding step max.: 999 m ...
2020 Viscotec Semi-automatic syringe filling system for dronabinol. The filling system is equipped with a storage container for heating the dronabinol to 60 – 70° C and keeping the Temperature constant during the filling process. The syringe is filled through the syringe tip and under a protective gas atmosphere (e.g. argon). No air should remain in the syringe. The filling system is suitable for the filling amounts of 265 mg, 530 mg or 1060 mg with tight tolerance limits. The dosing accuracy of the Pharma Dispenser 3VHD8 (0.35ml / U) amounts 1%. The repeat accuracy is > 99%, depending on the material. Detailed material data are currently not available. The determination of the actual dosing accuracy and dosing time takes place during commissioning. The customer is taking care of the process development. The storage container has a capacity of 500 ml and withstands a pressure of 0 ...
Baader Filleting Line Includes conveyors, header, 588 filleting machine, trimming line, spares, shaprening machine 2021 Full details on request
Baader Fish Filleting Machine Model: 185 Designed for medium-large whitefish Last used on cod/haddock Overhauled in 2020 and little use since
Fish Skinning Machine Make: Steen Model: ST600 Built 2008 Regularly serviced and well maintained
Pile feeder - separating head 2 buckles 1 knife Noise hood Batch counter LCD touch-screen control Belt delivery Sheet size : 490x650 mm - min. 120x172 mm (only Parallel fold) - min. 105x172 mm (with special equipment) - min. 174x174 mm (with cross fold) Fold length: min. 58 mm Paper weight : 40-250g/sqm Pile height : 590 mm Speed : 180 m/min
Fine boring head, spindle tool, boring head, bridge tool, fine boring headBoring tool, spindle headBoring tool, spindle headBoring rodReceptacle for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731 200Boring head for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-010Boring block for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-500Counterweight for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-600Tool holder: GRAFLEX Holder size G7 = 46 mmProcessing diameter: 200-280 mmAdjustment accuracy: 0.01
AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 488 Technical description: Power supply: 400 V, 50 Hz, 3 Ph Approx dimensions: 3100 x 1400 x 1900 mm It can be combined with Filleting machine for herring, sardine and mackerel Baader 35
FILLETING MACHINE BAADER TYPE: 208 Technical description: Output conveyor width (x2): 108 mm Power supply: 400V / 50 Hz Power: 2,6 kW Dimensions: 3750 x 1050 x 1250 mm This machine processes small gutted and headed hake, small haddock, saithe, cod and whiting. The cuts of the spring-loaded circular knives being controlled by the fish itself, the BAADER 208 produces single fillets with skin of high quality and with best yield. The BAADER 208 is easy to maintain and to operate. All functional areas are very well accessible. The machine is of robust construction and consists mainly of stainless materials so that it has a long service life also when used at sea.
HEADING AND FILLETING MACHINE FOR SALMON AND MORE, CARNITECH TYPE: CT2620 + CT2630 Technical description: Heading machine CT2620 Power supply: (3x) 400 V, 50 Hz, 8 A Machine number: 08-0081 Year: 28/08/08 Dimensions: 4200 x 2100 x 1800 mm Filleting machine CT2630 Machine number: 08-0067 Year: 18/06/08 Power supply: (3x) 400 V, 50 HZ, 11 A Dimensions: 1800 x 850 x 2000 mm CT 2620 has been designed for head and tail cutting of salmon fish from 2 to 7 kg. The product is fed to the machine via a feeding chute, after which several operations are carried out on the fish, as the round attachment rotates one quarter of a revolution for each push on the button on the operation panel, see section 3.0 for further details. During initial operation, the occiput is sawed through with a round knife, where upon a guillotine knife tilts down to cut off the head, which then lands in the waste carrier ...
FILLETING MACHINE, BAADER 36 Technical description: Power supply: 400 V/50Hz Dimensions: 3500 X 1000 X 1700 mm - 2300 X 1000 X 1100 mm Can be combined with Automatic feeder BAADER 488 The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483 or 484. A skinning machine BAADER 55 can be attached for the production of skinless herring fillets.
FILLETING MACHINE FOR SARDINE, HERRING, BLUE WHITING, BAADER TYPE: 134 Technical description: Power supply: 380 V, 50 Hz, 12,0 A, 2 kW, 3 Ph Dimensions: 3000 x 2100 x 1200 mm Weight: 450 Kg Can be combined with Automatic feeder for sardine and herring, Baader type: 478 This machine is especially designed for the filleting of small herring and pilchard with an overall lentgh of 15-25 cm (25-125 g), the convenient infeeding procedure and the steplessly adjustable operating speed permit high throughput. Excelent yield is guaranteed by a meat-saving selfadjusting headcut, adjustable tailcut and reliable passage through the filleting tools leading to smoothly cut block-fillets, single fillets without dorsal fins as well as belly cut herring with or without tail fins. Combined with the automatic feeder BAADER 478, the machine becomes an automatic filleting unit operated by only one person fo ...
FILLETING MACHINE BAADER 35 WITH NOBBING SYSTEM (SINGLE OR BUTTERFLY FILLET) FOR HERRING (20-40 CM), MACKEREL (24-40 CM), BLUE WHITING (22-40 CM) AND OTHER PELAGICS Technical description: Serail number: 10-1363-0035 Year: 1992 Throughput: 100-200 pieces/min Dimensiones: 3300 x 1250 x 1800 mm The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483, 484 or 488. A skinning machine BAADER 55 can be attached for the produc ...
# Formlabs Form 3L (2022) – SLA-Komplettpaket mit Nachbearbeitung Gebrauchtes SLA-System mit minimaler Laufzeit für professionelle Anwendungen Formlabs Form 3L aus 2022, Inbetriebnahme Oktober 2022. Laufzeit ca. 50 Betriebsstunden. Das System nutzt SLA-Technologie (Stereolithografie) und eignet sich für Prototypenbau, Funktionsteile und Kleinserien mit hohen Anforderungen an Oberflächenqualität und Detailgenauigkeit. Lieferumfang Komplettpaket: Form 3L Drucker Form Wash L (automatisierte Reinigungsstation) Form Cure L (UV-Aushärtekammer) 2 Liter Tough 2000 Resin inkl. separatem Tank 2 Liter High Temp Resin inkl. separatem Tank 2 Liter Rigid 10K Resin inkl. separatem Tank Die mitgelieferten Materialien decken unterschiedliche Anforderungsprofile ab: Tough 2000 für schlagzähe Bauteile, High Temp für thermisch belastbare Anwendungen bis 238°C HDT, Rigid 10K für steife, glasfaser ...
max. temperature: 150-500 Grad basket dimensions: 300x210x460 mm total power requirement: 2.6 kW weight of the machine ca.: 80 kg dimensions of the machine ca.: 0.80x0.60x0.95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lang Bosch Folding Machine on behalf of a customer completely overhauled 4 fold pockets,
Powder filling and capping system for cans including vacuuming and gas flushing device. - Specifications: Can diameter: 99-127mm | can height: 100-180mm | output: max. 7 cans/minute at -90Kpa Vacuum | residual oxygen: = 3% | nitrogen pressure: 0,1-0,8Mpa | air supply: 0,6-0,8Mpa | power: 3kW, AC220V | dimensions of the machine: L1900xW800xH1800mm | weight: 880kg. ? Specifications laser engraver: engraving depth: 0.01mm-0.4mm | laser wavelength: 10.6um | minimum line width: 0.1mm | minimum character size: 0.2mm | repeat accuracy: ?0.03mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All m ...
Suitable for firing ceramics and clay, number of burners: 10+1, fuel: natural gas or liquefied petroleum gas (LPG), connected load: 8kW, length: 8800mm, width: 2200mm, height: 2300mm, with control cabinet, control panel and spare parts, the machine has few operating hours, an on-site inspection is possible.
Horizontal flowpack machine for smaller products, top loader. Version with higher cycle rate. Conveyor belt, longitudinal and end sealing servo driven, PLC controlled, operation via touch screen. No product - no bag function. - Specifications: max. speed of the machine in neutral: 200 cycles/min | bag dimensions (not product dimensions): L(50-unlimited)xW(50-140)xH(3-55)mm, note W+H max. 140mm | suitable film width max.: 300mm | suitable film thickness: 30-80?m | number of knives: 2 pcs | end sealing: rotary | number of servo motors: 3 (feeding, longitudinal and end sealing) | standard machine housing: painted steel | parts in contact with product: stainless steel 304 | power supply: 220V, 1-phase, 50Hz | rated power: 3.8kW | dimensions of the machine (LxWxH): 3900?850?1500mm | weight: 600kg. Please note that our new prices are often below the usual used prices. Please feel free to inqui ...
Working width: 2500mm, an on-site inspection is possible, not under power.
Flow wrapping machine for high speed packaging of smaller products in flow pack bags. The flow wrapping machine is suitable for packaging of one or more, evenly or unregular shaped, dry, medium/larger products. The flowwrapper is equipped with a special infeed system of 6 guiding conveyors (driven by servo motors) to sort the products in series and feed them to the infeed table. The products do not have to be loaded individually by hand, which results in a considerable production advantage and contributes significantly to the efficiency of the flowwrapper. AMTECs flow wrap packaging machine is perfectly configured to the bag length in terms of the knives and their diameters with an optimization of the speed in the result. - Specifications: suitable product dimensions L(depending on bag length)xW(15-60)xH(5-30)mm | bag dimensions: L(48-60)xW(15-60)xH(5-30)mm | number of rotary knives: 6 p ...
Flow wrapping machine for high speed packaging of smaller products in flow pack bags. The flow wrapping machine is suitable for packaging of one or more, evenly or unregular shaped, dry, medium/larger products. The flowwrapper is equipped with a special infeed system of 6 guiding conveyors (driven by servo motors) to sort the products in series and feed them to the infeed table. The products do not have to be loaded individually by hand, which results in a considerable production advantage and contributes significantly to the efficiency of the flowwrapper. AMTECs flow wrap packaging machine is perfectly configured to the bag length in terms of the knives and their diameters with an optimization of the speed in the result. - Specifications: suitable product dimensions L(depending on bag length)xW(15-60)xH(5-30)mm | bag dimensions: L(45-55)xW(15-60)xH(5-30)mm | number of rotary knives: 6 p ...
Flow wrapping machine for high speed packaging of smaller products in flow pack bags. The flow wrapping machine is suitable for packaging of one or more, evenly or unregular shaped, dry, medium/larger products. The flowwrapper is equipped with a special infeed system of 6 guiding conveyors (driven by servo motors) to sort the products in series and feed them to the infeed table. The products do not have to be loaded individually by hand, which results in a considerable production advantage and contributes significantly to the efficiency of the flowwrapper. AMTECs flow wrap packaging machine is perfectly configured to the bag length in terms of the knives and their diameters with an optimization of the speed in the result. - Specifications: suitable product dimensions L(depending on bag length)xW(15-60)xH(5-30)mm | bag dimensions: L(48-60)xW(15-60)xH(5-30)mm | number of rotary knives: 5 p ...
Flow wrapping machine for high speed packaging of smaller products in flow pack bags. The flow wrapping machine is suitable for packaging of one or more, evenly or unregular shaped, dry, medium/larger products. The flowwrapper is equipped with a special infeed system of 6 guiding conveyors (driven by servo motors) to sort the products in series and feed them to the infeed table. The products do not have to be loaded individually by hand, which results in a considerable production advantage and contributes significantly to the efficiency of the flowwrapper. AMTECs flow wrap packaging machine is perfectly configured to the bag length in terms of the knives and their diameters with an optimization of the speed in the result. - Specifications: suitable product dimensions L(depending on bag length)xW(15-60)xH(5-30)mm | bag dimensions: L(55-85)xW(15-60)xH(5-30)mm | number of rotary knives: 4 p ...
Flow wrapping machine for high speed packaging of smaller products in flow pack bags. The flow wrapping machine is suitable for packaging of one or more, evenly or unregular shaped, dry, medium/larger products. The flowwrapper is equipped with a special infeed system of 6 guiding conveyors (driven by servo motors) to sort the products in series and feed them to the infeed table. The products do not have to be loaded individually by hand, which results in a considerable production advantage and contributes significantly to the efficiency of the flowwrapper. AMTECs flow wrap packaging machine is perfectly configured to the bag length in terms of the knives and their diameters with an optimization of the speed in the result. - Specifications: suitable product dimensions L(depending on bag length)xW(15-60)xH(5-30)mm | bag dimensions: L(80-170)xW(15-60)xH(5-30)mm | number of rotary knives: 3 ...
Flow wrapping machine for high speed packaging of smaller products in flow pack bags. The flow wrapping machine is suitable for packaging of one or more, evenly or unregular shaped, dry, medium/larger products. The flowwrapper is equipped with a special infeed system of 6 guiding conveyors (driven by servo motors) to sort the products in series and feed them to the infeed table. The products do not have to be loaded individually by hand, which results in a considerable production advantage and contributes significantly to the efficiency of the flowwrapper. AMTECs flow wrap packaging machine is perfectly configured to the bag length in terms of the knives and their diameters with an optimization of the speed in the result. - Specifications: suitable product dimensions L(depending on bag length)xW(15-60)xH(5-30)mm | bag dimensions: L(90-220)xW(15-60)xH(5-30)mm | number of rotary knives: 2 ...
Intermittent flow wrapping machine for wide and high products. Bottom loader. Conveyor belt, longitudinal and end sealing servo driven, PLC controlled, operation via touch screen. No product - no bag function. - Specifications: max. speed of the machine in neutral: 20 cycles/min | bag dimensions (not product dimensions): L(80-unlimited)xW(Max.390)xH(10-200)mm, note W+H max. 390mm | suitable film width max.: 800mm | suitable film thickness: 30-75?m | number of knives: 1 pcs | end sealing: intermittent (up and down) | number of servo motors: 3 (feeding, longitudinal and end sealing) | standard machine housing: stainless steel 304 | parts in contact with product: stainless steel 304, food grade conveyor belt | power supply: 220V, 1-phase, 50Hz | rated power: 5.2kW | dimensions of the machine (LxWxH): 4200x1400x1450mm | weight: 1200kg. Please note that our new prices are often below the usua ...
Flowpack machine with film feed from the bottom. Intermittent operation for extra wide and high products. Conveyor belt, longitudinal and end sealing servo driven, PLC controlled, operation via touch screen. No product - no bag function. - Specifications: max. speed of the machine in neutral: 15 cycles/min | bag dimensions (not product dimensions): L(60-unlimited)xW(300-600)xH(10-200)mm, note W+H max. 600mm | suitable film width max.: 1200mm | suitable film thickness: 30-75?m | number of knives: 1 pcs | end sealing: intermittent (up and down) | number of servo motors: 3 (feeding, longitudinal and end sealing) | standard machine housing: stainless steel 304 | parts in contact with product: stainless steel 304, food grade conveyor belt | power supply: 220V, 1-phase, 50Hz | rated power: 6kW | dimensions of the machine (LxWxH): 4200x1800x1450mm | weight: 1300kg. Please note that our new p ...
Flowpacker with Box Motion System for extra wide and high products. Bottom loader. Conveyor belt, longitudinal and end sealing servo driven, PLC controlled, operation via touch screen. No product - no bag function. - Specifications: max. speed of the machine in neutral: 40 cycles/min | bag dimensions (not product dimensions): L(80-unlimited)xW(50-320)xH(3-140)mm, note W+H max. 320mm | suitable film width max.: 680mm | suitable film thickness: 30-75?m | number of knives: 1 pcs | end sealing: reciprocating | number of servo motors: 3 (feeding, longitudinal and end sealing) | standard machine housing: painted steel | parts in contact with product: stainless steel 304 | power supply: 220V, 1-phase, 50Hz | rated power: 5.7kW | dimensions of the machine (LxWxH): 5000?1200?1650mm | weight: 920kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire ...
Box Motion Flowwrapper for wide and tall products. Film feed from the bottom. Conveyor belt, longitudinal and end sealing servo driven, PLC controlled, operation via touch screen. No product - no bag function. - Specifications: max. speed of the machine in neutral: 60 cycles/min | bag dimensions (not product dimensions): L(60-unlimited)xW(25-215)xH(10-90)mm, note W+H max. 215mm | suitable film width max.: 450mm | suitable film thickness: 30-75?m | number of knives: 1 pcs | end sealing: reciprocating | number of servo motors: 3 (feeding, longitudinal and end sealing) | standard machine housing: painted steel | parts in contact with product: stainless steel 304 | power supply: 220V, 1-phase, 50Hz | rated power: 4.3kW | dimensions of the machine (LxWxH): 4200?1000?1300mm | weight: 960kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and t ...
Flow wrapping machine for wider products. Film feeding from the top. Conveyor belt, longitudinal and end sealing servo driven, PLC controlled, operation via touch screen. No product - no bag function. - Specifications: max. speed of the machine in neutral: 100 cycles/min | bag dimensions (not product dimensions): L(60-unlimited)xW(25-215)xH(10-65)mm, note W+H max. 215mm | suitable film width max.: 450mm | suitable film thickness: 30-75?m | number of knives: 1 pcs | end sealing: rotary | number of servo motors: 3 (feeding, longitudinal and end sealing) | standard machine housing: painted steel | parts in contact with product: stainless steel 304 | power supply: 220V, 1-phase, 50Hz | rated power: 4.6kW | dimensions of the machine (LxWxH): 4100?1050?1500mm | weight: 810kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your pac ...
Economical flow wrapper for smaller products, top loader. Conveyor belt, longitudinal and end sealing servo driven, PLC controlled, operation via touch screen. No product - no bag function. - Specifications: max. speed of the machine in neutral: 100 cycles/min | bag dimensions (not product dimensions): L(50-unlimited)xW(50-165)xH(3-60)mm, note W+H max. 165mm | suitable film width max.: 350mm | suitable film thickness: 30-80?m | number of knives: 1 pcs | end sealing: rotary | number of servo motors: 3 (feeding, longitudinal and end sealing) | standard machine housing: painted steel | parts in contact with product: stainless steel 304 | power supply: 220V, 1-phase, 50Hz | rated power: 3.8kW | dimensions of the machine (LxWxH): 3900?850?1500mm | weight: 600kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. ...
Flow wrapper designed for light products. Bottom loader. Conveyor belt, longitudinal and end sealing servo driven, PLC controlled, operation via touch screen. No product - no bag function. - Specifications: max. speed of the machine in neutral: 100 cycles/min | bag dimensions (not product dimensions): L(70-unlimited)xW(50-140)xH(3-60)mm, note W+H max. 140mm | suitable film width max.: 350mm | suitable film thickness: 30-75?m | number of knives: 1 pcs | end sealing: rotary | number of servo motors: 3 (feeding, longitudinal and end sealing) | standard machine housing: painted steel | parts in contact with product: stainless steel 304 | power supply: 220V, 1-phase, 50Hz | rated power: 3.8kW | dimensions of the machine (LxWxH): 3900?850?1500mm | weight: 600kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task ...
Flowwraping machine for high speed packaging of smaller products in flow pack bags. The flow wrapping machine is suitable for packaging of one or more, evenly or unregular shaped, dry, medium/larger products. The flowwrapper is equipped with a special infeed system of 6 guiding conveyors (driven by servo motors) to sort the products in series and feed them to the infeed table. The products do not have to be loaded individually by hand, which results in a considerable production advantage and contributes significantly to the efficiency of the flowwrapper. AMTECs flow wrap packaging machine is perfectly configured to the bag length in terms of the knives and their diameters with an optimization of the speed in the result. - Specifications: suitable product dimensions L(depending on bag length)xW(15-60)xH(5-30)mm | bag dimensions: L(50-65)xW(15-60)xH(5-30)mm | number of rotary knives: 5 pcs ...
Flow wrapping machine for high speed packaging of smaller products in flow pack bags. The flow wrapping machine is suitable for packaging of one or more, evenly or unregular shaped, dry, medium/larger products. The flowwrapper is equipped with a special infeed system of 6 guiding conveyors (driven by servo motors) to sort the products in series and feed them to the infeed table. The products do not have to be loaded individually by hand, which results in a considerable production advantage and contributes significantly to the efficiency of the flowwrapper. AMTECs flow wrap packaging machine is perfectly configured to the bag length in terms of the knives and their diameters with an optimization of the speed in the result. - Specifications: suitable product dimensions L(depending on bag length)xW(15-60)xH(5-30)mm | bag dimensions: L(60-100)xW(15-60)xH(5-30)mm | number of rotary knives: 4 ...
Flow wrapping machine for high speed packaging of smaller products in flow pack bags. The flow wrapping machine is suitable for packaging of one or more, evenly or unregular shaped, dry, medium/larger products. The flowwrapper is equipped with a special infeed system of 6 guiding conveyors (driven by servo motors) to sort the products in series and feed them to the infeed table. The products do not have to be loaded individually by hand, which results in a considerable production advantage and contributes significantly to the efficiency of the flowwrapper. AMTECs flow wrap packaging machine is perfectly configured to the bag length in terms of the knives and their diameters with an optimization of the speed in the result. - Specifications: suitable product dimensions L(depending on bag length)xW(15-60)xH(5-30)mm | bag dimensions: L(70-150)xW(15-60)xH(5-30)mm | number of rotary knives: 3 ...
Flow wrapping machine for high speed packaging of smaller products in flow pack bags. The flow wrapping machine is suitable for packaging of one or more, evenly or unregular shaped, dry, medium/larger products. The flowwrapper is equipped with a special infeed system of 6 guiding conveyors (driven by servo motors) to sort the products in series and feed them to the infeed table. The products do not have to be loaded individually by hand, which results in a considerable production advantage and contributes significantly to the efficiency of the flowwrapper. AMTECs flow wrap packaging machine is perfectly configured to the bag length in terms of the knives and their diameters with an optimization of the speed in the result. - Specifications: suitable product dimensions L(depending on bag length)xW(15-60)xH(5-30)mm | bag dimensions: L(70-200)xW(15-60)xH(5-30)mm | number of rotary knives: 2 ...
Flowpacker with Box Motion System for extra wide and high products. Bottom loader. Conveyor belt, longitudinal and end sealing servo driven, PLC controlled, operation via touch screen. No product - no bag function. - Specifications: max. speed of the machine in neutral: 50 cycles/min | bag dimensions (not product dimensions): L(50-unlimited)xW(50-320)xH(3-110)mm, note W+H max. 320mm | suitable film width max.: 680mm | suitable film thickness: 30-75?m | number of knives: 1 pcs | end sealing: reciprocating | number of servo motors: 3 (feeding, longitudinal and end sealing) | standard machine housing: painted steel | parts in contact with product: stainless steel 304 | power supply: 220V, 1-phase, 50Hz | rated power: 5.2kW | dimensions of the machine (LxWxH): 5000?1200?1650mm | weight: 1080kg. Please note that our new prices are often below the usual used prices. Please feel free to inqu ...
Economical flowpack machine with film feeding from the top, suitable for wide products. Conveyor belt, longitudinal and end sealing servo driven, PLC controlled, operation via touch screen. No product - no bag function. - Specifications: max. speed of the machine in neutral: 100 cycles/min | bag dimensions (not product dimensions): L(60-unlimited)xW(50-240)xH(10-80)mm, note W+H max. 240mm | suitable film width max.: 500mm | suitable film thickness: 30-75?m | number of knives: 1 pcs | end sealing: rotary | number of servo motors: 3 (feeding, longitudinal and end sealing) | standard machine housing: painted steel | parts in contact with product: stainless steel 304 | power supply: 220V, 1-phase, 50Hz | rated power: 4.6kW | dimensions of the machine (LxWxH): 4100?1050?1500mm | weight: 810kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire a ...
Box motion flow wrapper for wide and tall products. Bottom loader. Conveyor belt, longitudinal and end sealing servo driven, PLC controlled, operation via touch screen. No product - no bag function. - Specifications: max. speed of the machine in neutral: 40 cycles/min | bag dimensions (not product dimensions): L(50-unlimited)xW(25-215)xH(10-90)mm, note W+H max. 215mm | suitable film width max.: 450mm | suitable film thickness: 30-75?m | number of knives: 1 pcs | end sealing: reciprocating | number of servo motors: 3 (feeding, longitudinal and end sealing) | standard machine housing: painted steel | parts in contact with product: stainless steel 304 | power supply: 220V, 1-phase, 50Hz | rated power: 4kW | dimensions of the machine (LxWxH): 4200?1000?1300mm | weight: 960kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your p ...
Flowpack machine with higher cycles rate, film feeding from the top. Designed for smaller products. Conveyor belt, longitudinal and end sealing servo driven, PLC controlled, operation via touch screen. No product - no bag function. - Specifications: max. speed of the machine in neutral: 200 cycles/min | bag dimensions (not product dimensions): L(50-unlimited)xW(50-165)xH(3-55)mm, note W+H max. 165mm | suitable film width max.: 350mm | suitable film thickness: 30-80?m | number of knives: 2 pcs | end sealing: rotary | number of servo motors: 3 (feeding, longitudinal and end sealing) | standard machine housing: painted steel | parts in contact with product: stainless steel 304 | power supply: 220V, 1-phase, 50Hz | rated power: 3.8kW | dimensions of the machine (LxWxH): 3900?850?1500mm | weight: 600kg. Please note that our new prices are often below the usual used prices. Please feel free to ...
Flow wrapper designed for light products. Bottom loader. Version with higher cycle rate. Conveyor belt, longitudinal and end sealing servo driven, PLC controlled, operation via touch screen. No product - no bag function. - Specifications: max. speed of the machine in neutral: 200 cycles/min | bag dimensions (not product dimensions): L(60-unlimited)xW(50-140)xH(3-60)mm, note W+H max. 140mm | suitable film width max.: 350mm | suitable film thickness: 30-75?m | number of knives: 2 pcs | end sealing: rotary | number of servo motors: 3 (feeding, longitudinal and end sealing) | standard machine housing: painted steel | parts in contact with product: stainless steel 304 | power supply: 220V, 1-phase, 50Hz | rated power: 3.8kW | dimensions of the machine (LxWxH): 3900?850?1500mm | weight: 600kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire ...
Horizontal flowpack machine for smaller products, top loader.Conveyor belt, longitudinal and end sealing servo driven, PLC controlled, operation via touch screen. No product - no bag function. - Specifications: max. speed of the machine in neutral: 100 cycles/min | bag dimensions (not product dimensions): L(50-unlimited)xW(50-140)xH(3-60)mm, note W+H max. 140mm | suitable film width max.: 300mm | suitable film thickness: 30-80?m | number of knives: 1 pcs | end sealing: rotary | number of servo motors: 3 (feeding, longitudinal and end sealing) | standard machine housing: painted steel | parts in contact with product: stainless steel 304 | power supply: 220V, 1-phase, 50Hz | rated power: 3.8kW | dimensions of the machine (LxWxH): 3900?850?1500mm | weight: 600kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging tas ...
Flowshrink machine for high-speed packaging of products in a special range of product sizes. Double drive longitudinal sealer system ensures firm and smooth longitudinal sealing. Blade Position Adjusting on Power-Off function. Servo drive system ensures precise and stable performance. Very economic alternative to side sealing systems when less flexible product sizes are used. - Specifications: packaging sizes: L(100-300)xW(30-100)xH(2-100)mm | sealing bar width: 230mm | max. speed of the machine in neutral: 100 cycles/minute | power: 220V, 3.75kW | infeed length: 3000mm | machine dimensions: L5050xW1190xH1650mm | weight: 1020kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from ap ...
Fully automatic production line for the manufacture of FFP2 dust masks (KN95). Stable and efficient production of single-use dusk masks with FFP2 protection class (KN95) and made of 4-5 layers of material. Production procedure: Material feeding from roll (up to 5 layers) | feeding, cutting and ultrasonic welding of the nose-bridge | ultrasonic welding of the ear strap | folding and shaping of the mask | ultrasonic welding of the mask edges | punching (separating) and ejection. The tension of the feed materials can be controlled separately for each material. By changing the templates, masks of different sizes and styles can be produced. Controlled by Mitsubishi PLC, operation via Weinview touch screen. - Specifications: max. speed of the machine in neutral: 60 cycles/minute | power: 8kW, 220V | machine dimensions L6000xW1000xH1800mm | weight: 1500kg. Video on YouTube:
# Stratasys F170 (2020) – FDM-System mit umfangreichem Zubehör Technische Daten: Baujahr: 2020 Technologie: FDM (Fused Deposition Modeling) Betriebsstunden: unter 1.600 Stunden Standort: 76437 Rastatt Zustand und Wartung: Gebrauchte Maschine in sehr gutem, funktionsfähigem Zustand. Letzte Wartung durch Stratasys im Mai 2024, seitdem weniger als 20 Betriebsstunden. Sofort einsatzbereit. Umfangreiches Zubehör inklusive: 13 Build Trays 1 Rolle ASA Blau (originalverpackt) 4 Druckköpfe: PLA, Elastomer, ABS (installiert), QSR für Stützmaterial (installiert) 1 PLA Cooler 1 Auswaschstation Materialvielseitigkeit: Durch die mitgelieferten Druckköpfe sind verschiedene Materialien einsetzbar – von Standard-Thermoplasten über ASA bis hin zu Elastomeren. Die QSR-Stützmaterialtechnologie ermöglicht lösbare Supportstrukturen für komplexe Geometrien. Die F170 eignet sich für Prototyping ...
Filling and Depositing machine MINI-FILL 100 - demo-machine, brand-new condition, year of manufacture: 2025 - all-in hopper with built-in impeller system, machine housing made from food-approved plastic, multi-colour-touch screen control panel with adjustment of impeller speed, dosing volume and reverse function, machine suitable for single dosing, automatic dosing with pre-set counter or continous dosing with hand gun, 8 liter-hopper made from food-approved plastic with lid double outlet D = 11,1 mm and 6-teeth gear for semi-liquid, soft and airy products, two pieces injection needle D = 6,52, L = 50 mm, electrical supply: 230V/50Hz/1~, power supply: 100 W
grinding length: 400 mm grinding width: 200 mm magnetic plate size: 350 x 150 mm weight of the machine ca.: 1.15 t dimensions of the machine ca.: 2 x 1.6 x 2 m Balancing device integrated Magnetic plate 500x200mm www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
GUK Folding Machine Stand Alone FA 21/4 S2 SVA 730 Outdated Nominal voltage 380 V / Mp 50 Hz Nominal consumption 1.54 KW Rated current 4.6 A
Folienschneider / Foil Cutter BAIER FOLSCH Baujahr / Year 1966 - Serial-No. 66236
maximum number of results exceeded
please refine your search
