mbo f 520 used for sale

A Fujifilm UV flatbed and roll printing system is available. Roll weight: 25kg, max. roll media width: 1620mm, max. rigid media width: 1610mm, min. media width: 210mm, max. media thickness: 13mm, max. roll outer diameter: 180mm, media core diameter: 2inch/3inch, max. print length: 3030mm, media guidance: 170mm. Machine dimensions X/Y/Z: approx. 3250mm/800mm/1550mm, weight: approx. 300kg. The system was only used from December 2019 until early 2024. Documentation vorhanden. An on-site inspection is possible.

Ref. no.: 18636 Manufacturer: EICHHOLZ Year of construction: 2014 Further information: WHAT IS AN OCTABIN TIPPER? An octabin tipper is an industrial automation system used for the controlled and safe discharge of plastic raw materials, granules, or regrind materials from large-volume octabin containers. Heavy octabins are loaded by forklift and then lifted and tilted in a controlled manner using a hydraulic or chain-driven mechanism. The material is discharged into the lower hopper and can then be transferred to the production line via vacuum conveying or dosing systems. These systems are widely used in plastic injection molding and extrusion plants to reduce labor, increase production efficiency, and ensure safe material handling. FOR SALE: OCTABIN TIPPER + MATERIAL FEEDING SYSTEM For sale: 1 heavy-duty industrial octabin tipper / material discharge system. The system was removed from a ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 92600 € : 1750.14 € : 160 to : 6 mm : 750 mm : 1100 mm : 230 mm : 1 - 172 mm : 45 1/min : 6 : 100 mm : 80 mm : 375 mm : 540 mm : 11 kW : 1890 mm : 1950 mm : 3650 mm : 15500 kg Welded steel frame construction 6-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Motorized ram adjustment Variable stroke rate via frequency converter Operating modes: Adjustment mode Two-hand release Foot release 2-stroke operation via light barriers Continuous operation Touchscreen for Stroke counter with preselection for continuous operation Stroke rate adjustment Lubrication intervals and duration Alarm messages Motor direction of rotation Monitoring of inputs and outputs 2 free cams for connecting peri ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 83200 € : 1572.48 € : 130 to : 4.5 mm : 650 mm : 950 mm : 220 mm : 1 - 132 mm : 50 1/min : 6 : 95 mm : 70 mm : 325 mm : 500 mm : 11 kW : 1800 mm : 1725 mm : 3020 mm : 8000 kg Welded steel frame construction 6-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Motorized ram adjustment Variable stroke rate via frequency converter Operating modes: Adjustment mode Two-hand release Foot release 2-stroke operation via light barriers Continuous operation Touchscreen for Stroke counter with preselection for continuous operation Stroke rate adjustment Lubrication intervals and duration Alarm messages Motor direction of rotation Monitoring of inputs and outputs 2 free cams for connecting perip ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 70300 € : 1328.67 € : 100 to : 4.5 mm : 700 mm : 1000 mm : 210 mm : 1 - 132 mm : 58 1/min : 6 : 90 mm : 60 mm : 300 mm : 445 mm : 7.5 kW : 1650 mm : 1545 mm : 3011 mm : 7000 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 6 sides Pneumatic counter-balancing of the ram 7", touchscreen Gears in oil bath Pneumatic clutch-brake combination PLC control for safety Photocell light barriers Motorized slide adjustable Mechanical overload fuse Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations OPTIONS: vibration pads € 192,00 bolster plate € 2.580,00 The data for this ad was created ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 48720 € : 930.55 € : 610 mm : 600 mm : 610 x 305 mm : 300 x 600 mm : 650 mm : 700 mm : 5 - 25 m/min : 1.100 mm/min : 1 - 12 mm : 370 mm : 1.5 kW : 0.004 kW : 0.19 kW : 7,4 kW : 2670 mm : 1810 mm : 2050 mm : 2100 kg : 355 x 50 x 127 mm : 1.450 U/min : 3,7 kW : 4 mm : 0,02 mm : 0,2 mm : 0,002 mm control panel on swiveling arm aut. vertical feed hardened slide ways in all 3 axes with needle rollers grinding wheel spindle on 4 high precision angular contact bearings electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator manual extractor with diamond grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of Logo ...

4x Feed Goods 1x cement etc. Water Mixer 2000/1400 ltr Theoretically, approx. 60 cbm/h Control / Recipe Management Container for control Weight 12000 kg Documentation available Many pictures and videos available on request. Machine location Belgium. ------------------ The Fibo F2200 is a mobile concrete batching plant that can convince with a mixer volume of 2000/ 1400 ltr per batch. The machine offered here has everything you need for a concrete plant.

Panel sizing saw format 4 type Kappa Automatic 80 Technical data: - Cutting width (mm): 4300 - Cutting depth (mm): 4200 - Cutting height (mm): approx. 80 - Power (kW): 16 - Vacuum plate lifter: included

Table milling machine fields type F 700 M Technical data: - Milling spindle swivel: 90 degrees / 45 degrees - Spare milling spindle: included

Sliding table saw Felder type K 940S Technical data: - Table length (mm): approx. 3000 - Power (kW): 5.5 - Scoring machine: included - Saw blade: swivelling

Sliding table saw Altendorf type F45 CE Technical data: - Table length (mm:) approx. 3000 - Saw blade: swivelling - Scoring machine: included - Main motor power (kW): 5.5 - Power (kW): 0.75

Technical Specifications & Performance Data The Used Capsuling Machine Robino & Galandrino MONOSTADIO FT6 is a high-precision rotary capsuler designed for PVC capsule application on sparkling wine formats. Engineered for reliable operation in demanding beverage production environments, this second hand unit combines throughput with precise capsule placement for professional finishes on glass bottles. Manufacturer / Model: Robino & Galandrino MONOSTADIO FT6 Year of manufacture: 2010 Machine category: Capsuling machine (PVC capsules) Production speed: up to 7,000 bottles/hour (format-dependent) No. of heads: 6-head rotary carousel for continuous operation Container type: Glass bottles Bottle format: 0.75 L (typical sparkling wine “Spumante” format) Product type focus: Spumante and sparkling-style wine applications Safety: Safety features included (guarding and interlocked access) ...

Technical Specifications & Performance DataThe Robino & Galandrino Fenix 2 is a dedicated capsuling machine engineered for precise capsule application on bottles within a used bottling line context. Built with industrial packaging reliability in mind, this unit integrates smoothly into beverage production environments and second hand bottling equipment upgrades. Manufactured by Robino & Galandrino, it leverages the brand’s engineering for consistent, repeatable results in capsule application.Manufacturer: Robino & GalandrinoModel: Fenix 2Year: 2014Speed: 5000 BPH ( bottles per hour) Machine category: Capsuling machineSchema/code: FEX750Electrical supply: 400 V, 3-phaseFrequency: 50 HzNominal current: 6.5 ATypical application: Capsule application on bottles in beverage production linesAdvanced Automation & Control SystemsThe Fenix 2 supports straightforward integration with modern li ...

Wire EDM machine Type: Robocut C 600 i Manufacturer: Fanuc Year: 2018 Control: Fanuc Series 31i-W model B X: 600 mm Y: 400 mm Z: 310 mm Wire diameter (max.): 0.3 mm Workpiece height (max.): 310 mm Workpiece width (max.): 820 mm Workpiece length (max.): 1050 mm Max workpiece weight: 1000 kg Equipment: refrigerator, compressor Machine in good condition, fully functional, under power Find more here - / Contact us at -

: neu : 2024 : 8310 : prompt, Zwischenverkauf v : Taiwan : 50700 € : 958.23 € : 1 : 2035 mm : 3.5 mm : Hydraulisch : 135 ° : 3000 mm : 1100 mm : 1750 mm : 2200 kg NC control for bending angle manual back gauge 600 mm hydraulic driven vertical movement of upper beam segmented blade segmented goose neck rail 30°, 110 mm with quick tool change system one piece flat bottom bar 30 mm according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 61300 € : 1158.57 € : 4010 mm : 3.5 mm : Hydraulisch : 135 ° : 5600 mm : 1800 mm : 2050 mm : 6100 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 070125 : prompt, Zwischenverkauf v : Türkei : 40200 € : 767.82 € : 1 : 40 to : 2.5 mm : 450 mm : 650 mm : 150 mm : 1 - 80 mm : 125 1/min : 4 : 75 mm : 40 mm : 225 mm : 300 mm : 835 mm : 4 kW : 1350 mm : 1370 mm : 2330 mm : 2100 kg Welded steel frame construction 4-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Manual rammer adjustment Variable stroke rate via frequency converter Operating modes: Adjustment mode Two-hand release Foot release 2-stroke operation via light barriers Continuous operation Touchscreen for Stroke counter with preselection for continuous operation Stroke rate adjustment Lubrication intervals and duration Alarm messages Motor direction of rotation Monitoring of inputs and outputs 2 free ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm : 7 mm : 7 mm : 4 mm : 5 mm : 5 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear guid ...

: neu : 2025 : 070095 : ca. 14 - 16 Wochen ab Auf : Türkei : 20100 € : 385.92 € : 10 to : 1.4 mm : 270 mm : 370 mm : 100 mm : 1 - 40 mm : 200 1/min : 4 : 35 mm : 25 mm : 160 mm : 180 mm : 0.75 kW : 1170 mm : 1180 mm : 1700 mm : 590 kg Welded steel frame construction 4-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Variable stroke rate via frequency converter Operating modes: Adjustment mode Two-hand release Foot release 2-stroke operation via light barriers Continuous operation Touchscreen for Stroke counter with preselection for continuous operation Stroke rate adjustment Lubrication intervals and duration Alarm messages Motor direction of rotation Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic ce ...

pressure: ca. 5 t dayligth: 110 mm throat: 40 mm weight of the machine ca.: ca. 50 kg dimensions of the machine ca.: 1,2 x 0,5 x 1,3 m Function: ready for operation: 6 t (estimaeted) hand-operated spindle press. The machine is professionally and durably lashed. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. counting speed sheets: 2000 /min max. paper size: 50 x 70 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Waste recovery and sorting plant for sale in Barcelona, Spain On behalf of CLD Corporation, TEGA Industrial Assets announces the sale of a complete waste recovery and sorting plant located in Barberà del Vallès, Barcelona, Spain. The sale is due to a change in operations at the site. The plant was installed in 2022, has very low working hours and is in excellent condition. It is designed for the treatment of mixed non-hazardous waste and commercial and industrial waste through an automated sorting, classification and material recovery line. The facility has a nominal capacity of 11.42 tonnes/hour and includes equipment from leading European manufacturers, including PICVISA, NIHOT, SPALECK, GÜNTER, FELEMAMG, SPR and others. Main equipment includes a shredder/bag opener, feeders, screens, optical sorters, densimetric separator, magnetic separators, eddy current separator and ma ...

Never used, new out of the box, Hole plate diameter: Enterprise E32, Hopper: 42 litres, Power: 3 x 220V, 50Hz, 2.2kW, Dimensions: 700 x 580 x 490 mm, Weight: 62 kg

With built-in compressor to cool hopperMachine is never used, new out of the box, Hole plate diameter: Unger, H82 3-piece, Hopper: 6 litres, Power: 3 x 400V, 50Hz, 1.5kW, Dimensions: 500 x 500 x 500 mm, Weight: 61 kg

Machine never used, new out of the box, Hole plate diameter: Enterprise E22, Hopper: 6 litres, Power: 3 x 400V, 50Hz, 1.5kW, Dimensions: 370 x 350 x 430 mm, Weight: 39 kg

Belt width: 600 mm, Belt speed: 15 m/s, Infeed height: 700 mm, Outfeed height: 1650 mm, Power: 3 x 400V, 50Hz, 0.75kW, Dimensions: 3800 x 800 x 2050 mm

Edge banding machine Type: G 200 Manufacturer: Felder Year: 2007 Edge thickness: 0.4 – 2 mm Part thickness: 10 – 45 mm Min. part length: 250 mm Min. part width: 90 mm Feed: 5 – 5.5 m/min Moulding speed: 9000 rpm Moulding diameter: 70 mm Glue temperature: 20 – 210 °C Glue container capacity: 1.2 kg Weight: 310 kg Including suction Copy wheels from a newer model Currently after service Machine in good condition, fully functional, under power Find more here - / Contact us at -

Edge banding machine Type: G 360 Manufacturer: Felder Year: 2022 Edge thickness: 0.4 – 5 mm Part thickness: 10 – 45 mm Min. part length: 210 mm Min. part width: 70 mm Feed speed: 8 m/min Total power: 5,5 kW Weight: 450 kg Machine length: 2300 mm Equipment: pre-milling unit trimming unit lamp for preheating edged material glue melting tank removable glue tray radius cidliny flat cidliny Machine in very good condition, fully functional, under power Find more here - / Contact us at -

Offered is a universal knee-type milling machine. Working area X/Y/Z: approx. 710mm/250mm/430mm, table clamping surface: 1250mm/315mm, spindle mount: ISO 40, speed range: 45-2000rpm (18 steps), feed rate: 10-1000mm/min, rapid traverse: available, control: conventional with electrical program control (PFAFF panel). Equipped with horizontal milling spindle, manual support bracket for long milling arbors, hydraulic pressure accumulator system, coolant device, chip collection tray, central lubrication. Weight: approx. 2100kg, overall dimensions X/Y/Z: approx. 1950mm/1750mm/1850mm. Inspection possible by arrangement.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 62000 € : 1171.8 € : 3100 mm : 2 mm : Hydraulisch : 135 ° : 5 kW : 4370 mm : 1770 mm : 1790 mm WITH VERTICAL UPPER BEAM MOVEMENT FOR THE USE OF FLAT AND HIGH TOP RAILS hydraulic driven NC control for bending angle manual back gauge 600 mm sharp flat upper rail 45° (in one piece) mechanical crowning adjustment clamping force adjustment upper beam vertical according to CE rules Optionen: sectionet upper rail, height 100 mm motorized back gauge, 800 mm with 2-axis touch control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Size: W 4.20 x D 3.10 x H 2.40 m - With entrance door - With Manerup refrigeration unit

General SKUR0075 Makeunknown manufacturer plate is missing Year of constructionunknown LocationBarneveld Main Features MaterialStainless steel Number of1 heads Specified Features - Liquid filler MaterialStainless steel Fillercheck Motor0,55 kW 230/400 Volt (pump), 0,25 kW 230/400 Volt (mixer) Information With switchgearcheck Floorspace1,4x0,9 M Total height2,0 M Extra SpecificationsThis is a liquid dosing system where a quantity can be filled using a flow meter. The mobile skid contains a tank of 60 Ltr with the dimensions dia 370x630mm with a stirrer. A Suurmond pump with a capacity between 2 and 6 ltr / min with a maximum pressure of 9 bar. An Endress + Hauser (E&:H) Promass flow meter provides the dosage quantity. Liquid fillers-Packaging machines > Liquid fillersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compare ...

Offered is a CNC horizontal milling machine. Working area X/Y/Z: 1000mm/800mm/850mm, pallet size: 630x630mm, table load: 1300kg, B-axis indexing: 0.001°, spindle speed: 6000rpm, spindle power: 30kW, spindle torque: 600Nm, tool holder: SK50, magazine positions: 120, spindle internal cooling pressure: 70bar, pump capacity LD: 150l/min at 3bar, pump capacity MD: 40l/min at 7bar, pump capacity HD: 32l/min at 70bar, cooling capacity cooling unit: 11.8kW, control: FANUC 31iMA. Equipped with additional pallets with threaded grid (24xM16 in 125mm grid), direct absolute scales, spindle internal cooling system, automatic scraper belt chip conveyor with 1000l dirty water fine filtration, recirculating chiller, washing shower, mist extraction system, touch probe. Weight: approx. 18500kg, overall dimensions X/Y/Z: approx. 6800mm/4200mm/3400mm. Inspection possible by arrangement.

Offered is a CNC horizontal machining center. Working area X/Y/Z: 750mm/750mm/850mm, pallet size: 550mm/550mm (2-position changer), spindle speed: 15000rpm, tool holder: SK50, tool magazine: 60 positions (chain type), B-axis: 0.001°, max. loading weight: 800kg, rapid traverse: 60m/min, power-on hours: 64148h, feed time: 21867h, control: Fanuc 31i. Equipped with 2-position pallet changer, coolant filtration system (central system designed for up to 3 machines), cooling unit, oil mist extraction system, tool package (15x drill chucks, 8x collet chucks, 13x face clamping holders), linear measuring system X/Y/Z, weight: approx. 12500kg, overall dimensions X/Y/Z: approx. 5500mm/3500mm/3200mm. Inspection possible by arrangement.

: neu : 2024 : 5549 : prompt, Zwischenverkauf v : Taiwan : 63830 € : 1206.39 € : 1 : 1 : 610 mm : 610 mm : 600 x 300 mm : 300 x 600 mm : 650 mm : 700 mm : 5 - 25 m/min : 0 - 2,250 mm/min : 3 - 32 (0,001) mm : 320 mm : 5,5 kW kW : 0.74 kW : 1 kW : 1 kW : 2950 mm : 1490 mm : 2080 mm : 2200 kg : 355 x 50 x 127 mm : 1.450 U/min : 0,001 mm 10.4", graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptme ...

: neu : 2026 : 050162 : prompt, Zwischenverkauf v : Taiwan : 69940 € : 1321.87 € : 1 : 800 mm : 610 mm : 800 x 400 mm : 800 x 400 mm : 810 mm : 5 - 25 m/min : 0.74 kW : 10 kVA kW : 3540 mm : 2080 mm : 2100 mm : 2900 kg : 980 mm : 350 kg : 355 x 50 x 127 mm : 0,001 mm : 500 - 1.800 U/min : 3,75 kW : 1.1 kW 10.4", graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and  ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 21770 € : 417.98 € : 457 mm : 460 x 146 mm : 450 x 150 mm : 482 mm : 180 mm : 1900 mm : 1400 mm : 2130 mm : 680 kg : 208 x 12,7 x 31,75 mm : 1,5 kW : 3 mm : 0,01 mm manual vertical feed manual longitudinal and cross movement of the table grinding wheel spindle on 4 high precision angular contact bearings electro-magnetic chuck150x450 mm coolant equiptment with filter manual dresser with diamond grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 7035.46 € : 135.78 € : 25 mm : MK 3 : 280 mm : 125 - 4000 (2 Stufen) U/min : 0,9 / 1,45 kW : M20 : 520 mm : 820 mm : 1900 mm : 275 kg : 125 mm : 110 mm : 240 - 790 mm : 420 x 340 mm Drilling capacity / normal drilling performance 25/30 (in E335/ST60) Drilling depth adjustment with fine adjustment Emergency stop pushbutton Undervoltage release electr. Drilling machine guard Manual reversing switch for clockwise and anticlockwise rotation Connection cable (1.5 m) with CEE plug Thermal overload protection OPTIONS (PRICES ON REQUEST): Drill package (vice &, keyless chuck) Coolant device LED lighting with pivot arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 5309.85 € : 102.48 € : 18 mm : MK 2 : 240 mm : 30 - 3000 U/min : 0.75 kW : M12 (steigungsabhängig) : 705 mm : 355 mm : 1825 mm : 195 kg : manuell mm/U : 82 mm : 180 - 870 mm : 340 x 280 mm : 100 mm Drilling capacity / normal drilling capacity 18/20 (in E335/ST60) Thread cutting system Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob Manual feed EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift operation OPTIONS: Drill package 3 (vice &, keyless chuck) Coolant device LED lighting with pivot arm The data for this ad was created with ModulMWS - the softw ...

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 1781.01 € : 10 mm : B 16 : 180 mm : 250 - 3000 U/min : 0,45 kW : 400 mm : 248 mm : 460 mm : 30 kg : 50 mm : 105 - 245 mm : 300 x 200 mm : 50 mm Continuous/normal drilling performance 10/12 (in E335/ST60) Manual feed Digital speed display Robust, high quality and inclined rotation hood for easy speed reading LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Undervoltage release Drill protection with electr. Fuse Connection cable with Schuko plug (1.2 m) 3 years warranty for single shift operation OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice &, keyless chuck) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 48500 € : 926.35 € : 60 to : 3.5 mm : 500 mm : 700 mm : 190 mm : 1 - 100 mm : 65 1/min : 4 : 70 mm : 45 mm : 260 mm : 340 mm : 5.5 kW : 1250 mm : 1350 mm : 2400 mm : 3500 kg Welded steel frame construction 4-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Operating modes: Adjustment mode Two-hand release Foot release 2-stroke operation via light barriers Continuous operation Automatic central lubrication Equipment in accordance with CE regulations OPTIONS: vibrations pads bolster plate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 1896.69 € : 200 x 32 x 32 mm : 1 kW : 2550 1/min : 42 mm : 270 mm : 470 mm : 1050 mm : 600x800x1350 mm : 60 kg Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine 12 months warranty for single shift operation Art.Nr.: 317.774with machine stand, emergency stop pushbutton and brake OPTION (price on request): Footpedal as emergency stop ALTERNATIV MODELS: Art.Nr.: 317.762 table version Art.Nr.: 317.777 with machine stand with integrated suction, emergency stop pushbutton and brake The da ...

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU327X695 LocationBarneveld CEcheck MakeQVF Glasstechnik Main Features MaterialGlass Volume150 Ltr. Specified Features - Vertical tank MaterialBorosilicate Glass 3.3 Closed vertical tankcheck 2x Capacity2x 150 l. Vessel sizesø 700 x 800 mm Top connectionsDN25, DN40 OutletDN25 Information TypeR409/454 No.M702-723865 Mounted on legscheck in frame Floorspace1,90 x 1,00 m Total height2,20 m Weight500 kg Extra SpecificationsQVF Glass Receiver System – 2 × 150 L Receiver Flasks with Coil Heat Exchanger (Condenser/Cooler)New arrivalsVertical tanksQVF GlasstechnikNew arrivalsTanks > Vertical tanksBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit u ...

General SKU255X227 MakeComi-Condor LocationBarneveld TypeH.T. 600 GMR Pressure Working pressure0.1 Bar Main Features MaterialStainless steel Motor22 KW Inlet diameter75 mm Specified Features - Pusher centrifuge Basket centrifugecheck Capacity52 l Basket sizesDia. 600 mm Max. loading weight65 kg Motor22 kW, 380 v Max. basket speed2000 rpm Max. temperature100°C Pusher centrifuges Pusher centrifugecheck Basket diameter600 mm Max. loading weight65 kg Motor14 kW, 380 V, 150 rpm, (Ex) Max. basket speed2000 rpm Mechanical operated pushercheck Motor2,2 kW, 380 V., 950 rpm, (Ex) MaterialStainless steel 1.4404 (316L) Information No.0878 Year of construction1993 Mounted on framecheck With switchgearcheck(as is) Floorspace1,30x3,60 m Total height2,70 m Weight4000 kg Extra SpecificationsCake volume 52 dm3, slurry density 1,25 kg/dm3, filter surface 0,45 m2 New ar ...

General SKU041Z170 MakeForplex Chateaubriant TypeFL-4 No.562 Year of constructionunknown LocationBarneveld Main Features Motor75 KW Inlet diameter650 mm Specified Features - Fine Impact Mill MaterialMild steel Fine Impact Mills Grinder(1x) Rotor sizedia. 650mm With grinding trackdia. 665mm With hoppercheck Inlet320x300mm Motor75,0 KW, 400 Volt Information Floorspace1,2x1,3 M Total height1,5 M Weight1900 KGDiscountFine Impact MillsForplexDiscountMills > Fine Impact MillsBrand > Forplex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKUR1308 LocationBarneveld MakeAnhydro TypeSFP-59 (Spin Flash Dryer) No.E-866.219C Main Features MaterialStainless steel Motor18.5 KW Inlet diameter400 mm Specified Features - Spray dryer Spray dryerSpin Flash Dryer Drying tower dia.800 mm Cylindrical height± 2200 mm OutletDN 315 Motor11 kW 380-400-415/660-690 Volt Evaporation capacity347 kg/h (water) Air heating (gas)check With fancheck (2x) Capacity1: 3154 m³/h: 2: 6000 m³/h Motor1: 11 kW: 2: 18,5 kW MaterialStainless steel 1.4301 (304) Information Year of construction2006 Mounted on framecheck Floorspace2,1x2,1 m Total height4,5 m Extra Specificationswith: - feed vat Ø1000 mm, motor: 11kW 1500 rpm, RECONDITIONED Spray dryersReconditionedAnhydroDryers > Spray dryersReconditionedBrand > Anhydro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new ...