mbo f 520 used for sale

Exhibition / demonstration machineThe new Pilous DB700Automatic double edger is characterized by the best functionality and long service life due to its solid construction. 3 driven steel feed rollers at the bottom, 2 rotating pressure rollers with rubber coating at the topWith control panel for automatic saw blade adjustmentNumber of saw blades can be expanded as required2 return rollers on the machine for easy operations4 rows of anti-kickback technologySeveral emergency stop switchesEasily positioned scale. Saw shaft made of extra hardened premium

Log band saw Hauslhof CTR800Hydraulics, demonstration machine, Bloch diameter up to 830 mm, total length 5800 mm, width 2300 mm, with hydraulic system for clamping, clamping, turning and lifting the Bloch Motor output power total at 100% ED 10 KwIncluding:CTR800H-Ver3CTR800H-KSDCTR800H-STHCTR800H-STH-VCTR-SSPCTR- 11CTR-VORCTR-AMPCTR-EGLCTR-LG AutomatCTR-Pump-EA

Log band saw CTR710M, built in 2013, 12 m cutting length, incl. LG 100 and scoring machine, 6 kW, 550 kgPrices subject to change, errors, printing and typesetting errors excepted

Demonstration machineThe new, state-of-the-art, solid log band saw from Holzprofi is for a log diameter of up to 75 cm and offers many possibilities to cut your wood and logs correctly. Highest cutting accuracy thanks to cutting thickness calculator, galvanized lower part, powder-coated upper partincl. Pre-cutting device! For all types of wood, logs or waste wood. can be expanded indefinitely with extension sections. CE approved. The original!, not a replica Technical data:max. stem diameter

Demonstration machineSolid log band saw for a log diameter of up to 71 cm with extension sections that can be extended indefinitely. Automatic feed with infinitely variable speed. Electric height adjustment can be controlled from the operator's desk. 3.8 inch touch LCD display for height adjustment. Saw unit suspended on both sides for more stability and better precision. CE approved. Technical data:max. trunk diameter 71 cmmax. Board width 67 cmEngine output S1 5.5kW section length basic version 2.1mCutting length

Exhibition / demonstration machineThe new state-of-the-art, solid log band saw from Holzprofi is for a log diameter of up to 75 cm and offers many possibilities to cut your wood and logs correctly. Highest cutting accuracy thanks to cutting thickness calculator, galvanized lower part, powder-coated upper part For all types of wood, logs or waste wood. can be expanded indefinitely with extension sections. CE approved. The original!, not a replica Technical data:max. trunk diameter 750 mmmax.

Demonstration machineExtra strong, solid, durable log band saw for a log diameter of up to 1000 mm. Soft starter is included, expandable with extension sections. Automatic feed with infinitely variable speed. Electric height adjustment can be controlled from the operator's desk. With telescopic lever log turner, log lifter, log jack with drive for horizontal log feed. Hydraulic angle stops.2 pieces of stem clamping tool. hydraulic saw blade tension. Electrically adjustable saw blade guide. CE approved.

Demonstration machineThe professional log band saw for a log diameter of up to 100 cm from Forestor Pilous is the further development of decades of sawmill tradition, specially designed for the sawing professional. With telescopic lever log turner, log lifter, log jack with drive for horizontal log feed. 5 hydraulic angle stops.2 pieces of stem clamping tool. The saw is standard for blocks up to 7.6 m and can be extended as desired. Automatic feed with infinitely variable speed. Electrical

Band saw Felder FB510, year 2019, very good condition, standard equipmentPrices subject to change, errors, printing and typesetting errors excepted

Log band saw Pilous CTR750E, built in 2024, very good condition, electric feed infinitely variable, 5.5 kWPrice subject to change, errors, printing and typesetting errors excepted

Double edging Pilous DB700M, built in 2023, like new, incl. saw blades, 11 kW, approx. 700 kgPrices subject to change, errors, printing and typesetting errors excepted

Pilous CTR520 log band saw, good condition, cutting length 5.8 m, max. 550 mm trunk diameter, 4 kW S1, 3110 mm cutting length, 310 kgPrices subject to change, errors, printing and typesetting errors excepted

Solid band mill for materials up to the diameter of 130 cm. Soft starter is included, with extending sections expandable. Automtic feeder with variable speed. Electrically height adjustment adjustable from control panel. With hydraulic log taber, log turner and clamping tool. CE Technical details: main engine power 22 kW S1 cutting length 6,7 m max. trunk diameter 130 cm weight 2800 kg

The CTR-DB400 sets new standards in precision, efficiency, and ease of use. This compact double edger was specifically developed for businesses that demand the highest cutting quality while minimizing operating costs. With its powerful drive, robust construction, and precise adjustment of the saw units, the CTR-DB400 delivers consistently clean, parallel cuts – ideal for the cost-effective processing of planks, squared timber, and boards. Thanks to its intuitive operation and low-maintenance components, the CTR-DB400 is the perfect solution for small and medium-sized production lines looking to reliably increase their output. Designed, built, and quality-tested in Europe! Made in EU Advantages and Features: - Fixed saw blade, adjustable in 50mm increments for maximum space utilization - Dust extraction directly at the saw blade for optimal dust removal - Carpet with 2 pressure rollers  ...

With strip blade, slightly usedSurface planer:Table dimensions 1800 x 410 mm, Max. chip removal 5 mm, Planer shaft diameter 100 mm, Number of planer blades 4 pieces,Thickness planer:Table dimensions 700 x 406 mm, Max. chip removal 4 mm, Feed speed 8m/min, Motor output power 5 kW S6 400V (4kW S1), Weight, 450 kg

AD planing machine Felder AD741, very good condition, year 2003, 4 kW S6, 400 V, 410 mm table length, 2000 mm table width, 4 knives, approx. 400 kgPrices subject to change, errors, printing and typesetting errors excepted

Demonstration machineYear of construction 2022The new FSN dressing thickness planer is characterized by its stable design, the strong machine casting tables with a ground surface and modern handling. The machine is space-saving and extremely convenient when changing from dressing to thickness. The solid guide of the thickness table ensures the best planing quality.A mechanical digital display ensures perfect reading of the thickness height.CE compliant, 100% Made in EU (developed, built, quality tested)

AD planing machine Holzprofi FS41N all incl. very good condition, incl. reversible blade, 2 speeds and feed 6/12 m, 4 kW, 1850 mm table length, 410 mm table width, 4 knives, approx. 470 kgPrices subject to change, errors, printing and typesetting errors excepted

Sliding table saw milling machine Felder KF700S/03, built in 2006, good condition, incl. folding device for feed and tenon slotted hood, 5.5 kW S6, 3200 mm format table length, 3500,6500,8000,10,000 rpm, 780 kgPrices subject to change, errors, printing and typesetting errors excepted

Demonstration machineTechnical data:Motor output power 3 hp at 100 % ED, voltage 400V, extraction capacity 3900 m³/h, extraction connection 150 mm, distributor 3 x 100 mm, dimensions L x W x H = 150 x 75x 220 cm, weight approx. 60 kgPrices subject to change, errors, printing and typesetting errors excepted

Circular saw milling machine Bernardo FK2, good condition, 2.2 kW, 450 kgPrices subject to change, errors, printing and typesetting errors excepted

length: 450 mm width: 250 mm height: 1.250 mm accuracy +/-: 1 ° distance between tapping holes: H: 130 mm distance between tapping holes: V: 150 mm distance between tapping holes: H: 70 mm distance between tapping holes: V: 200 mm weight: - kg JOHANN FISCHER - Measuring Angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic multiple drilling machine for chair seats CAMAM mod. FMV/4U with 4 drilling units - N. 4 independent drilling units - Control panel - Year 1996 - CE compliant

Travel X/Y/Z: 600mm/400mm/400mm, spindle taper: ISO40, quill stroke: 100mm, speed: 3150rpm, machine dimensions X/Y/Z: approx. 2000mm/1800mm/1900mm, weight: approx. 1750kg. Documentation available. On-site inspection is possible.

Travel X/Y/Z: 600mm/400mm/400mm, quill stroke: 1000mm, spindle taper: ISO40, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2100mm/1750mm/1750mm, weight: approx. 1750kg. Documentation available. On-site inspection is possible.

turning diameter over bed: 2150 mm turning diameter over slide rest: 1800 mm turning length: 10000 mm speed: 1 - 300 U/min faceplate diameter: 1800 mm spindle bore: 200 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m - 4-jaw face plate Ø 1800 mm - 2 Steady rest Ø 100 to 560 mm and Ø 1.3 to 1.8 m - 4-way toolpost - tailstock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 x Treif Flexon, built in 2010 + 2014

RABOLINI IMPERIA C WITH AUTOMATIC FEEDER -Automatic Die cutting machine with Rabolini hot foiling attachment -Year: 1990 -Electromagnetic clutch -Max Sheet Size : 800x1100 mms., Max die cutting size 750x1050 mms. -Control cabin for sheet speed control from 900 / 1600 Sh/hour -Honeycomb plate for hot stamping, 2 chases and frames for die cutting -Three programmable heating zones from control cabin -Rabolini Hot stamping foil unit with programmable pulling rolls -Max pressure power: 280 tons -All parts and accessories -Available in April

50 HL Brewhouse Manufactured by fabdec in 2013 Gas Fired brew house consisting of Mash tun/kettle/hot liquor tank/underback/heat exchanger/wort pump/swing bend plate /work platform/gas burner and associated pipework and fittings This is a SECOND HAND brewhouse and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk For more information and more available stock please visit us at - advancedbrewing.co.uk

FKS Fold Master creasing machine; SN 1019 05, Stacker feeder, counter, delivery, 4 creasing tools, computer control

Lot of approx. 265 small roller bearings, SKF, FAG, INA, , mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, An absolute special price of € 0.7/piece excluding VAT. The total original price is at least 7 to 10 times higher. We can divide the bearings into 3 groups: 1) Approx. 225 pieces in cardboard or foil original packaging, including one item with 50 pieces (various SKF items such as minimal bearings, seal sets, etc.). Many bearings are from a large package where the individual bearings are not packaged. 2) Approx. 40 open, unused, fully functional bearing units. See bearing list on photo. Minor erro ...

1 x Used Wrapping Machine WM FC780 E, age 2005, Unwinder:, Single Reel holder, Max. reel diameter 1,200 mm, Thermoforming machine:, Max. tool size 780 x 570 mm, Max. tool size with pneumatic clamp frame 750 x 570 mm, Max. positive depth 130 mm, Max. negative depth 130 mm, Max. sheet width 810 mm, Max. sheet indexing 570 mm, Max. HIPS sheet thickness 1.8 mm, Max. EPS sheet thickness 3 mm, Max. platen stroke (upper – lower) 150 mm, Heater length 1,775 mm, Clamping force DaN 20,000, Upper heating, installed power Kw 41, Lower heating, installed power Kw 41, Vacuum pump motor Kw 2,2, Platen driving servo motor (each) Kw 7.5, Sheet index servomotor Kw 11, Dry cycle speed 45 Cycles/ min, Processing air pressure 7 bar, Water consumption at + 12° C. 60 L/ min, Air consumption at 7 bar 50 L/ cycle, Cutting Press:, Max. cut dimensions 760 x 550 mm, Platen clamping force DaN 60,000, Upper platen ...

Height=2.28 m, Overall length= 1.82 m, Overall width= 1.47 m, Net weight= 680 kg,

Height=1.87 m, Overall length= 1.2 m, Overall width= 1.42 m, Net weight= 557 kg,

industrial robot 6 axis FANUC Arc Mate 100i Be 6kg load capacity loading or welding robot for sale Robot FANUC Arc Mate 100iBe Robot Model A05B-1215-B651 year of manufacture: 2008 Axis: 6 Load capacity: 6 kg Reach: 1373 mm Repeatability: ±0.08 mm Robot weight: 238 kg Structure: Articulated Mounting: Floor Controller: R-J3IB Mate Control cabinet: AO5B-2445-B200 Electric power: 3kw 50 Hz 380v year of manufacture: 2008/06 Weight: 100kg

Type: Euroline L-18.5-L-R Type Laminator: KK-88-700-L Availability: from May 2026 Condition: in operation, well-maintained Overall length: 8755 mm Working height/belt height: 900 mm Mains voltage: 3 x 400 V + N + PE , 50 Hz Control voltage: 24 V, DC Air requirements. : 1100 l/min, 6 bar incl. laminator, guillotine, punching and cutting tool, filling station

General SKU334T899 MakeFriedhelm Stechel GmbH LocationBarneveld CEcheck TypeADE120-100 Main Features MaterialStainless steel Motor1.5 KW Inlet diameter748 mm Specified Features - Coating pan MaterialStainless steel 1.4301 (304) Coating pancheck Capacity150 Ltr. Batch sizemax. 130 kg Pan diameter1200 mm Pan depth620 mm In-/Outlet748 mm Motor1,5 kW 230/400 Volt Pan speed19 rpm Information No.D20909 Year of construction2009 Mounted on framecheck Floorspace2,5x1,8 m Total height2,3 mCoating pansFriedhelm StechelCoating pans > Coating pansBrand > Friedhelm Stechel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This Feeler FTC 20 was manufactured in 1999. It features a swing over bed of 560 mm and a maximum turning diameter of 350 mm. The spindle operates at speeds up to 3500 rpm, supported by a robust 15 kW motor. Ideal for precision turning with its 8 tool stations and manual tailstock. Consider the opportunity to buy this Feeler FTC 20 horizontal turning machine. Contact us for more information about this machine.

This 3-axis FAT FTM 165 horizontal turning machine was manufactured in 2018. Ideal for precision turning operations, it offers robust construction and reliable performance. Consider the opportunity to buy this FAT FTM 165 horizontal turning machine. Contact us for more information.

This Vertical Machining centre Hyundai Wia F500D was manufactured in the year 2012 in South Korea ans has 8508 operating hours. It is equipped with a Fanuc i Series. The machine includes a through-spindle coolant capability and a chip conveyor. The technical documentation and electrical schematics are available.

This 5-axis LGB KX45S FIVE 2 was manufactured in 2012, featuring a moving table of 1480 x 1440 mm and a high-speed spindle at 18,000 rpm. It includes a HEIDENHAIN ITNC 530 control, HSK 63A tool holder, and a 24-position tool changer. Ideal for precise, complex machining tasks. If you are looking to get high-quality milling capabilities consider the LGB KX45S FIVE 2 machine we have for sale. Contact us for more information.

This DECKEL FP4A was manufactured in 1994. A vertical machining centre featuring a travel range of X=565mm, Y=505mm, Z=400mm, SK40 tool holder, and a spindle speed of up to 4000 rpm. Consider the opportunity to buy this DECKEL FP4A vertical machining centre. Contact us for more information.

This 5-axis FPT STINGER XL CNC milling machine was manufactured in 2008. Ideal for complex and precise milling tasks, it offers advanced capabilities for a variety of applications. Consider the opportunity to buy this FPT STINGER XL CNC milling machine. Contact us for more information about this machine.

This C.B. Ferrari B18 was manufactured in 2002. It is a vertical machining center that has been well-maintained and is ready for immediate use. Consider the opportunity to buy this C.B. Ferrari B18 vertical machining center. Contact us for more information.

This 3-axis FEHLMANN Picomax 82 CNC was manufactured in 1998. It features a Heidenhain TNC 426 control, with travel dimensions of 685/315/540 mm, and a maximum spindle speed of 16,000 rpm. The tool magazine holds 32 tools, SK30, and the machine supports a maximum table load of 250 kg. Consider the opportunity to buy this FEHLMANN Picomax 82 CNC vertical machining centre. Contact us for more information about this machine.

This TOYODA FH 400 J Horizontal Machining center was manufactured in the year 2014 in Japan and has 36057 production hours. It is equipped with a Fanuc Series 32i-Model A control unit. The machine has a spindle speed of 15000 rpm.

This 3-axis FAMUP MMV 200/60 was manufactured in 2004. It features a table size of 2400 x 600 mm, with travel distances of X: 1500 mm, Y: 580 mm, and Z: 600 mm. The machine supports a table load up to 2000 kg and includes a high-speed spindle at 10,000 rpm, a 30-tool magazine, and CNC control by Heidenhain TNC 426. Contact us for more information about this machine.

This FORST RTSA 32x1600x630 was manufactured in 2019. Consider the opportunity to buy this FORST RTSA 32x1600x630 sheet metal machine. Contact us for more information.

This 3-axis FADAL 906-1 vertical machining center was manufactured in 1995. It features X, Y, and Z axes with travel distances of 1000mm, 500mm, and 500mm respectively. If you are looking to get high-quality milling capabilities, consider the FADAL 906-1 machine we have for sale. Contact us for more information.

This 3-axis ZEUS FMO 140B was manufactured in 2000. It features a dual-spindle system with both horizontal and vertical capabilities, and a maximum speed of 4000 rpm. The machine includes a Selca 4045 CNC, a recently replaced handwheel, and a network board. Axis travels are 1200 × 650 × 500 mm. Consider the opportunity to buy this ZEUS FMO 140B horizontal machining centre. Contact us for more information about this machine.