132,781 used machines on RESALE, but how to find them? Machine Search
Paal / BIG backhoe bucket 38 cm working width, with cutting edge without teeth, with quick-change mount, with wedge lock at the rear, Dimensions of the mount:, Bolt diameter: 40 mm, Handle/mounting width: 220 mm, LxWxH: 38x60x60, suitable for 3-6 t excavators, Further range of backhoe buckets for all common construction machines, excavators, quick-change systems, such as Martin, Geel, Winkelbauer, Lehnhoff, Verachtert, JCB, Geith, etc. available.
90 cm working width, 17 cm intake width
BIG backhoe bucket 55 cm working width, with screwed on teeth, with quick-change mount, Wedge lock at the rear, Dimensions of the mount:, Bolt diameter: 45 mm, Handle/mounting width: 250 mm, LxWxH: 55x60x70, suitable for 5-9 t excavators, Further range of backhoe buckets for all common construction machines, excavators, quick-change systems, such as Martin, Geel, Winkelbauer, Lehnhoff, Verachtert, JCB, Geith, etc. available.
15 cm working width, pick-up width 19.5 cm
50 cm working width, with Lehnhoff MS01 holder
50 cm working width, pick-up height center - center 30 cm, pick-up width 20 cm
30 cm working width, pick-up width 21 cm, pick-up height 24 cm
60 cm working width, with teeth
1 set of welding hooks, various Bobcat adapters in stock (Bobcat telescopic handler, 90 cm or 114 cm Bobcat adapter)
1 set of welding hooks, various Bobcat adapters in stock (Bobcat telescopic handler, 90 cm or 114 cm Bobcat adapter)
NEW, width: 140 cm, own weight: 165 kg, with Lehnhoff MS03 Symblock recording, CAT 4 - suitable for 4-5.5 t excavators
1 set of welding hooks, various Bobcat adapters in stock (Bobcat telescopic handler, 90 cm or 114 cm Bobcat adapter)
NEW, 140 cm wide, with Martin M10 mount, 123 kg net weight, suitable for 5.6 - 9.0 t excavators
1 set of welding hooks, various Bobcat adapters in stock (Bobcat telescopic handler, 90 cm or 114 cm Bobcat adapter)
1 set of welding hooks, various Bobcat adapters in stock (Bobcat telescopic handler, 90 cm or 114 cm Bobcat adapter)
1 set of welding hooks, various Bobcat adapters in stock (Bobcat telescopic handler, 90 cm or 114 cm Bobcat adapter)
NEW, 30 cm wide, with Lehnhoff MS01 Symlock mount, 39 kg net weight, suitable for 1.9 - 2.7 t excavators
NEW, 40 cm wide, with MS01 Symlock mount, 47 kg net weight, suitable for 1.9 - 2.7 t excavators
NEW, 120 cm wide, with Lehnhoff MS01 Symlock mount, 73 kg net weight, suitable for 1.9 - 2.7 t excavators
PEIFFER electric motor 8.3 kW, 1400 rpm, drive drum 740 x 310mm
4.80 m lifting height, 8000 kg lifting capacity, length: 3,840 mm, width: 1,800 mm, height: 2,550 mm, free lift: 1,400 mm, load capacity: 8 t at 600 mm LSP, with tine shifting and tine height adjustment
NEW, JLG Joystick, Part Number: 1600278
Initial registration: 09/1989, 232 kw, 50,444 km, 15,500 kg curb weight,
Type: VHUVLG, Model: 190, 270976 km, gross vehicle weight 3500 kg, 830 kg payload, 1950 kg deadweight
Used slope bucket / ditch cleaning bucket, Working width: 100cm, with Lehnhoff MS01 recording
HS Schoch hydraulic slope bucket, Technical specifications:, Recording: SA02 / MS 01, Cutting width: 1000 mm, Net weight: 82.80 kg, Volume: 0.055 l, Year of construction: 2023
Deckel FP5A CNC milling machine with Dialog 11 control. The machine is mechanically in good condition Stands in a hall almost rust-free. Accessories: Angle table
Ghioldi single layer blown film extruder, suitable for LDPE and MDPE, extruder with 55 mm Ø screw diam., lever screen-changer, Rotating head, 150 mm Ø die, calibrating cage, pull off unit, gusseting units, Cason corona treatment, 1.100 mm single winding station, Tower included, complete with manuals, electrical drawings, CE compliance
DECKEL FP 2 Tool Milling Machine Machine Details: Manufacturer: Lid Type: FP 2 Year of construction: approx. 1978 Condition: very good, technically tested and partially overhauled Availability: available on order The Deckel FP 2 is considered the reference among universal milling machines – robust, precise and reliable. Specifications: Travel: X-axis: approx. 400 mm Y-axis: approx. 200 mm Z-axis: approx. 400 mm Spindle: Speed range: approx. 40–2000 rpm Tool holder: ISO 40 Drive power: approx. 2.2 kW Tool clamping: manual Feeds: 8–400 mm/min Rapid traverses: approx. 1.5 m/min Digital display: 3-axis SINO Dimensions (LxWxH): approx. 2000 x 1500 x 1800 mm Weight: approx. 800 kg Equipment & Accessories: Vertical & horizontal milling equipment Drill quill 3-axis digital display SINO Coolant Setup Work light C ...
Used microfiltration system made by Membra Flow with ceramic membranes, program Simatic, capacity 12.000 liters / h. After general renovation and service it was taken out of production (not working again).
Fuchs extraction KKFD101F with silencer module and new filters ( activated carbon, HEPA , filter mat and filter bag ) without warranty; EXW, year of construction 11/99
Impressions=0 m, Condition= Very Good , Availability= 2025-11-03, with Kohmann suction belt feeder with adjustable chain station squaring section with suction table max format 1000 x 700mm min format 100 x 80mm Variable cut off length of foil by means of the change gears with stereo cylinder and glue-impression roller The glue stereo can be made ready outside the machine. The stereos are glued onto a carrier film which then can be easily mounted onto the stereo cylinder in the machine. In this way the stereo can be stored for reuse on repeat jobs. with delivery station electrical equipment for 380 v, 50 cycles AC with electrical push-button controls,
Cylinder part for Multi for GDK3500 die casting machine, 931732, Frech/Müller Weingarten, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The cylinder part for Multi comes from a spare parts warehouse at a production facility, has always been stored in a dry, sealed environment, is new and fully functional. The cylinder part for Multi item 931732 from Frech/Müller Weingarten. Suitable for Frech/Müller Weingarten GDK 3500 machines with 185-tonnes or 220-tonnes units.. Weight 720 kg. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, ...
Rötchenanlage: Kövy KM-S Year of Make: 2012 Head Machine Fortuna: Primus Pro V11.0 Year of Make: 2021 Kövy Dimensions: approx. 4900 × 1080 × 2530 mm Capacity: approx. 5,280 dough pieces /h Proofer capacity: 860 dough pieces Fortuna Hourly output: max.ca. 5,000 dough pieces /h Weight range: 40 -100 gr. Weight: approx. 1,100 kg Length of band top: 1,200 mm Length with strap: 1,705 mm Width: 1,000 mm Height: 1,520 mm Year of construction Fortuna: 2021 Year of construction Kövy: 2012
Edge banding machine Type: Tempora F 600 Manufacturer: Format-4 Year: 2021 Glued meters: 9000 In very good condition, under power Find more here - / Contact us at -
Brand Ferromatik Milacron GmbH Type eQ-280 - 2290 Bj Ud Dvsw Ebpweycjlp Year of manufacturing 2023 Machine hours 50 hours Clamping Force 2.800 kN Screw ø 60 Mm Injection Pressure 2.238 bar Shotvolume max. 905 cm3 Max. distance between holms 710 x 660 mm Min. mould height 250 mm Distance between plates max. 1.400 mm Dimensions (LxWxH) 8.500 x 2.100 x 2.500 mm Weight 18.400 kG
Height=1.6 m, Overall length= 1.6 m, Overall width= 1 m, Manufactor: Fritsch Range: 14 g to 198 g condition: refurbished In stock Description Fritsch FG-0-6 Head Piston Depositor 5 cm diameter piston. Hopper 26 cm x 47 cm x 35 cm. Air Required 400 L/min at 6 Bar Stainless Steel Construction Refurbished in good working condition
Height=1.6 m, Overall length= 1.6 m, Overall width= 1 m, Fritsch Euroline transporter. Spreading transport table.
Height=6 m, Overall length= 21 m, Overall width= 3 m, Producer: Fritsch Condition: RENOVATED Made in Germany Description: This Fritsch Line includes: Fritsch calibrator type KK 88-700-L Fritsch infeed belt with flour duster Fritsch CTR cutting and turning unit type CTR-700-30-L Fritsch unfilled coiler type CRH-120-400-L 2000 year
maximum number of results exceeded
please refine your search
