mbo f 520 used for sale

Fritsch Croissant Line Type: CTR Calibration head type: KK-88-700-R Year of construction 2002 CTR Punching - Turning Station Type: CTR700/30-L Year of manufacture 2007 with a total of 5 punches 1x 3 rows / small croissants 1x 3 rows / large croissants 1x 4 rows / medium croissants 1x 4 rows / large croissants 1x 6 rows / long croissants (See pictures) Wrapper for stuffed croissants: Type: FRH 400-L Year of manufacture 2007 Wraps for unfilled croissants: Type: CRH-120-400-L Year of Make: 2005 Total dimensions of the system: Height: 160cm Width: 570cm Depth: 130cm

ID3642 Nordberg G11 Fine year/Baujahr 2000 Cone crusher, 160 KW electric motor, with spare cone and casing, with inlet trough Cone crusher, 160 KW electric motor, with spare cone and jacket, with inlet tank

H&C Fours ETG 250°C Max temperature: 250 °C Capacity: 2000 x 2000 x 2200 mm Power needed: 6.5 kW Voltage: 400V

H&C Fours 400°C 1000 x 1100 x 1000 mm Max temperature: 400°C

H&C Fours 400°C 1000 x 1100 x 1000 mm

0: ja Working width: 3000 mm 0: nein Eder + Mueller fitting centre for windows --------------------------------- Sale on behalf of the customer from the customers location. The machine was in use until closing and is now at the customers warehouse. Previous hardware: Maco Multi Matic (other hardware is also possible) Technical manufacturers description: --------------------------------- Table height and working angle mechanically adjustable with permanently mounted hardware bearing Sash stop table, length 3,000 mm, with fixed hardware bearing Felt-bonded support 12 pivoting counterholders for hanging the sashes Hardware detection for centered and constant gear position 1 storage unit with 4-way air connection with automatic special screwdriver with pneumatic depth stop 6-way turret stop for different screw depths Pneumatic height adjustment for 6 screw levels Automatic screw feed Manual  ...

x-travel: 650 mm y-travel: 600 mm z-travel: 500 mm control: Sinumerik 840 D pl Siemens Main spindle:: turning speed range - main spindle: 20 - 28.000 min/-1 power capacity - main spindel: 23 / 18 kW max. Torque: 79 Nm tool taper: HSK-A63 NC-Tilting round table:: table surface area: Ø 630 mm Swivel range: A: +30° / -115 ° rotatable: C: 360 ° max. table load: 500 kg max. workpiece sizes: Ø 630 x 313 mm table speed: A:25 / C:65 min/-1 Tool-Presetter:: number of toolpositions: 117 pos. max. tool diameter: 90 (125) mm max. tool length: 300 mm feeds:: rapid traverse ( X / Y / Z ): 60 m/min Accelaration: 10 m/s² feed power: 8,5 kN total power requirement: 43 kVA weight of the machine ca.: 10,5 t dimensions of the machine ca.: 8,5 x 5,5 x 3,0 m Documents: high pressure coolant: Coolantsystem: through spindle coolant: 80 bar / 1.300l elektr. hand wheel: Automatic Tool Changer: 117 p ...

New log wagon inclined 17° Timber lengths 2 – 5m Diameter 200 – 1000mm Tension trestles 3 pieces Clamping trestle opening 1000mm Longitudinal adjustment 1 trestles adjustable – 2 trestles fixed Clamping claw opening 900mm Clamping block adjustment servo-electric Cable drive 45kW

Works well.

Key data: 220 A, 230 V

Manufacturer: Fronius Model: MagicWave 2200 Job G/F Type: TIG Welding Machine (AC/DC) Welding current range: 3–220 A Power supply: 230 V, 1~ Process: TIG/MMA Condition: used Location: Bremen

Manufacturer: Festool Model: CTM 48 E LE EC/B22 Type: Industrial Vacuum Cleaner / Dust Extractor Tank volume: 48 litres Filter class: M Power: 1200 W Power supply: 230 V Condition: used Location: Bremen

Control System: Touch-screen operator panel Operation: Automatic color mixing and dosing Components of the Machine - Touch-screen control panel (CMA Challenger 151) - Integrated dosing & mixing system - Agitator / stirring unit (working components for mixing) - Pneumatic system / pressure control (pressure gauge and pneumatic connections) - Quick-release connections for tools/stirrers - Recipe management software (AURORA MIX / formula control system or equivalent), with integration into color-matching systems.

Web width: 520mm Voltage: 400V+IV+PE Current: 20A Control voltage: 24 V DC Air pressure: 6 bar

A lifting, filing, and sawing machine Hakumag is available. Table dimensions X/Y/Z: approx. 290mm/290mm, stroke: 10mm–80mm, throat depth: 155mm, table swivel: +/-15°, weight: approx. 120kg. An on-site inspection is possible.

used Forstner slitting line, control left, 0-line right, with motorized cross shear, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run was carried out. Working width: 250 - 1250 mm Sheet thickness steel: 1.5 mm Sheet thickness aluminium: 1.5 mm Colour: blue/yellow Total power requirement: 400 V Machine weight: 775 kg Dimensions: 1500 x 2200 x 1500 mm Coil weight: 2 t without straightening rollers Number of blades: 5 pairs Knife shaft diameter: 100 mm Speed: 25 m/min without bevel cut Coil width (max.): 1250 mm Maschinennummer/Machine number 102728 MST

x-travel: 400 mm y-travel: 320 mm z-travel: 450 mm Control: Haidenhain TNC 124 drive of main spindle: 3 kW number of spindle speeds: 63-3150 u/min tool taper: SK 40 stroke of quill vertical: 60 mm feed speeds: 5-2000 mm/min rapid traverse: 2 m/min work table:: 800x320 mm coolant: 20 l/min total power requirement: 5 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 2,2x2,4x1,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stainless steel conveyor belt 12.70m1.05m

Stainless steel conveyor belt 8.00m0.80m

Fanuc + 3 Breton machining centers

- Head Pick up Station - CNC Indexing Micro Head 0.001 Gr - Spindle extionsion - Internal coolant system - ATC Chain Tool changer 60 Positions - Under power

screw ø:: 30 mm screw length:: 16D screw speedl:: -- U/min Condition: used, Specification: Extruder - used - screw diameter: 30 mm - screw length: L = 16 D - with feed roller - Extruder water tempered, - Cylinder and head one tempering zone - Feed section can be cooled or heated - Flow rate adjustable - Screw compression approx.: 1:1.2 - Spraying head for hoses and profiles - Various injection moulds are available - Extruder complete incl.: - Motor from Techno Drives, type: MD 321 MA Drive power: 5 kW, 360 V Motor current max.: 19.7 A N/max.: 1,750 rpm - Control cabinet mounted directly next to the extruder - Profile/tube extrusion head with clamp - Temperature control Extruder is mounted on a base plate - Mass pressure measurement and display available - Operating and display elements are installed in the switch cabinet - Mobile version  ...

A vertical internal broaching machine Frömag is available. Broaching tools: 3, stroke: 800mm, pulling force: 60kN, connected load: 15kW. Machine dimensions X/Y/Z: approx. 1050mm/900mm/3800mm, control: Frömag Commander PP-10. An on-site inspection is possible.

Technical data: Printing width: 600 mm Colors: 4 Chamber doctor blade units: 3 Application: Inline with bag-making machine Condition: used Features: • Manufactured by Windmöller & Hölscher (W&H) • Designed for inline use with bag-making equipment • 3 chambers with doctor blades for precise ink transfer • Compact, robust construction for easy integration • Ideal for retrofitting or adding inline print capability

Membranpresse modell FISMA 210 (ITALIEN) Arbeitsgröße: mm 2100 x 1200 Öffnung mm 500 Arbeitshöhe mm 250 Öffnen und Schließen des Deckels mit vertikalen Pneumatikkolben Diese Presse eignet sich zum Furnieren von Formteilen wie Fensterflügelrahmen und gebogenen Teilen Oberheizung mit Heißluft Beheizung der Unterseite mit Heißluft Verbrauch approx. 9 kWt Arbeitszyklus: approx. 10 Min. Kompletter Kompressor zum Anheben der Abdeckung und unter der Abdeckung Verarbeitungsvorvakuum einstellbar bis 6,5 atm

Charmilles Form 20 Tabledimensions / T slots : 398,8 × 299,7 mm Tank dimensions: 208,2 L Longitidinal displacement X-axes: 300 mm Transversal displacement Y -axes: 200 mm Vertical displacement Z-axes: 250 mm Max weight on table: 350 kg

Roll Processing Machine Width 430 mm Transaction Lacquer UV Drying Punching Multilayer Video Kontrol E&L Nescan Winding mandrel 76 mm Slitter Takeup

FOBA G5 Laser Engraving Machine LP100 with Swing Doors - With IMP-EMC Intelligent Mark Positioning for engraving systems (Camera for optical detection of the component position and alignment of the laser marking) - Jacket engraving unit - X/Y cross table round shaft guide - Deflection unit (TS10), mounted on the laser head, with standard lens (f=163 mm), Labeling field approx. 120 x 120 [mm] - Water/water cooler - Z-axis (with gearbox and servo drive), travel 500 mm - X/Y cross table round shaft guide Table top 250 x 250 [mm] with steel stop bracket, Travel distances 480 x 500 [mm], Max. load: 100 kg - - Servo axis control for all axes Operating System Windows XP Engraving Management Console (IMP-EMC) application software package Control panel with monitor, keyboard and mouse Design in laser protection class 1 Dimensions (W/H/D) 1100 / 2200 / 2200 [mm] � ...

x-travel: 700 mm y-travel: 420 mm z-travel: 610 mm table-size: 1260 x 490 mm spindle taper: HSK E50 spindle turning speed range: 36000 U/min tool change unit: 42 weight of the machine ca.: 5 t HEIDENHAIN TNC430 Coolant through spindle www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICAL SPECIFICATIONS Manufacturer: MICROMIX Description: Concrete filling station Version: Semi-mobile Type: 500 Year of Make: 2017 Plate Mixer Batch: 0.5 cbm Hourly output: 15 cbm Drive power mixer: 15 kW Aggregate silos: 2 x 6 cbm Water storage tank: 120 l Binder silo: 27.5 cbm / 35 t cement Unloading conveyor (length/width): 10,000 mm / 800 mm Discharge height unloading conveyor: 4,000 mm Drive power unloading belt: 4 kW SPECIFIC COMMENT - Control module with magnetic stripe card - Automatic scale (calibratable) - Admixture dosing - Dust bag filter with electromagnetic vibrator and dust collection container - Height adjustment of the belt conveyor/unloading belt

60 packs/min for 2x2 and 2x3 longneck, Vichy, and NRW bottles 40 packs/min for 2x3 swing-top bottles

THERMO FISHER MICROCENTRIFUGE, Tubes : 24 , Elec: 230 V / 50 Hz, timer: 1 to 99 minutes , Max speed: 13 000, Temperature range: -9 to +40°C , Refrigerant: R-134a

THERMO FISHER microcentrifuge., Tubes: 24, Elec: 230 V/50 Hz, timer: 1 to 99 minutes, Max speed: 13 000, Temperature range: -9 to +40°C

Overview This palletizing and winding line consists of an Ocme  palletizer and two Robopac Genesis stretch wrapping machines, both manufactured in 2014. The line was designed for handling shrink containers and is in good condition. It is suitable for palletizing and wrapping multiple pallet formats and offers a production output of 30,000 bottles per hour, depending on the format. The grouping of the layer formation is done by two Fanuc robots. There are two more Fanucs for the palletizing and the adding of an intermediate layer. The palletizing and winding is part of a complete line, from which some components have already been sold. Technical details Palletizer Manufacturer: Ocme Model: Pegasus F450  Year of construction: 2014 Products processed: Shrink packs: PET 0.75 L 2 x 32 PET 1.0 L 3 x 2 PET 1.5 L 3 x 2 PET 1.5 L 3 x 4 Pallet Formats: Euro Pallet 800 x 1200 Chep Duesseldorfer 6 ...

Bread Roll Press Fortuna Automatic A 3 H+ Dough dividing and rounding machine TOP model with effective shutdown Head cleaning to the back Dividing head with stainless steel knife NEW Dough insert up to 2400g Dough divider with 3 new knitting plates Connection 400V, 16A-CEE plug Used machine overhauled with warranty Quality from a specialist company! Benefit from over 35 years of experience! Option: Platform or chassis Wirkteller Neu Service Package Maintenance contract E-Box Instruction & Commissioning

TECHNICAL SPECIFICATIONS Manufacturer: FRÄMBS & FREUDENBERG Description: Dewatering Screening Machine Type: "Roberg" 1600/5000/1 Available devices: 2 pcs identical Year of manufacture: unknown (90s) Screen length: 5,000 mm Screen width: 1,600 mm Number of screen decks: 1 pc. SPECIFIC COMMENT - No cracks, no deformations - Incl. outlet tray, drive and springs

Three identical Franka Robotics robots are available. Axes: 7, max. payload: 3kg, max. reach: 855mm, repeatability: +/-0.1mm, max. acceleration: 15m/s², weight: approx. 25kg. Documentation available. An on-site inspection is possible.

Key data: 300 t, 800 mm

Hydraulic Press Emanuel 300 ton Year of construction: 1989 Dimension table: 1600 x 1300 mm Light max: 1130 mm Light min: 350 mm Slide stroke: 800 mm Cushion stroke: 400 mm Side upright clearance: 640 mm

Key data: 800 t, 1350 mm

Hydraulic Press Gigant 800 ton Year of construction: 1997 Dimension table: 3200 x 2200 mm Light max: 1800 mm Light min: 450 mm Slide stroke: 1350 mm Cushion stroke: 510 mm Side upright clearance: no

Senco pneumatic clamping device, pliers clamper, stapler Top condition, as good as new unused, is sold as used

Key data: 1200 t, 1000 mm

Hydraulic Press Gigant 1200 ton Year of construction: 1993 Dimension table: 3700 x 2700 mm Dimension lower table: 3700 x 2700 mm removable Light max: 1590 mm Light min: 610 mm Slide stroke: 1000 mm Cushion stroke: 400 mm Side upright clearance: no

Tie bar expansion nut, adjustment nuts and split nuts for die casting machines from IDRA, Frech/Müller Weingarten, OP Die Casting Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Condition New The mother is new and fully functional. The goods can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar expansion nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300

WR FEEDER LABEL 500L, DEMONSTRATION SYSTEM - Technically overhauled and cleaned by the manufacturer!, - Friction feeder with 500 mm product width in the long version, - Encoder kit 1000 pulses, - ALTECH labeler, - Control system for ALTECH, - Automatic delivery with programmable descent, - Stand with H-base on casters, WR FEEDER LABEL is a system for separating and labelling cartons and bags. The encoder enables perfect synchronisation between the removal speed and the output speed of the labels, guaranteeing high accuracy when applying the labels.

Battery Production Facility Manufacturer: Aumann Year: 2016 Condition: Used – good working condition 1) Banding System for Battery Cells NMC/LTO Technical Data: 20,000 battery modules NMC (14 cells each) per year, cycle time 22.2 sec/cell Includes: - Control cabinet with Siemens control system - Modular protective design (Module 2) - Banding station A1023 for NMC (Samsung) and LTO (Toshiba) - Cleaning system in film feed area - Tool set for NMC (14 cells) 2) Assembly System for Battery Modules NMC/LTO Technical Data: 20,000 battery modules NMC (14 cells each) per year, cycle time 31 sec/module Includes: - Control cabinet with Siemens control system - Baseplate assembly and module housing - Cleaning and testing stations - Electrical inspection (DMC scan + NIO selection) - Housing assembly, end-of-line testing - Laser cell welding system with shielding - Tool sets for NMC (14  ...

sheet width - max.: 1010 mm plate thickness: 4.0 mm ST plate thickness: 2.5 mm VA plate thickness: 6.0 mm ALU number of strokes - loaded: max. 20 Hübe/min cutting angle: 1.5 ° work height max.: 900 mm Control: ELGO total power requirement: 5.5 kW weight of the machine ca.: 2200 kg. from a maintenance workshop good condition () Equipment: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge Includes NC ELGO positioning control TYP 85 - Electric cutting length limiter - Manual cutting gap adjustment - 1x side stop with scale - 2x support arms - 1x freely movable foot switch - Original operating instructions Special accessories included: - Pneumatic holding device for thin sheet metal blanks The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Frozen block cutter Manufacturer: Magurit Stainless steel Cutting dimensions: maximum cutting size 750 x 480 x 240 mm Motor: 4 kW hydraulic Power: 400 V / 50 Hz Dimensions: 1700 x 1100 x 1850 mm 3 knives

Manufacturer: Falch Model: Wheel Jet 30 2000-8-0-E Type of Machine : HD Water Jet Machine Specifications: - Pressure: 2000 bar - Flow rate: 8 l/min - Power supply: 400V, 63A Included Accessories: - 5 m high-pressure hose (false non-stop) - Safety equipment: suit, apron, helmet Find more here - / Contact us at -

Manufacturer: FRECH Model: DAW 125 S RC Year of Manufacture:1998 Type of Machine : zinc die-casting system Condition : The machine is fully functional and was used to manufacture bathroom accessories (shower handles). After just over a year of downtime, an oil change is required. Locking Force: 1250 kN Working Pressure: 105 bar Machine Weight: 6000 kg Rated Current: 40 A Rated Voltage: 3×400 V Control Voltage: 24 V Frequency: 50 Hz Find more here - / Contact us at -

Paletchanger 2 tafels Hoge druk koeling 15 bar Schroottransportband Maximale werkstukafmetingen: 3240 x 880 x 640 mm X-axis: 3000 mm Y-axis: 800 mm Z-axis: 585 mm Table dimensions: 3240 x 750 mm Max weight on the table: 3 ton Passage between uprights: 860 mm Admission in spindle (ISO): ISO 50 Power on the spindle: 30 kW Control : Mazatrol 640 Toolchanger: yes Number of toolholders: 40 positions Number of rotations: max 6000 rpm Number of pallets: (2x) 750 x 3240 mm Length: 3274 mm Depth: 8100 mm Height: 3546 mm Weight: 19 ton

TECHNICAL SPECIFICATIONS Manufacturer: FRÄMBS&FREUDENBERG Name: Dewatering screening machine Type: "Roberg" 1000/2500/1 Year of manufacture: unknown Screen length: 1,000 mm Screen width: 2,500 mm

Clipping machine Manufacturer: Poly Clip Model: FCA 3430 Capacity: 200 cycles/min Diameter range: 24–90 mm Voltage: 400V / 50Hz Electrical power: 2.8 kW Machine dimensions:1,455x1,200x2,015mm Machine weight: 590kg