134,076 used machines on RESALE, but how to find them? Machine Search
Production: KOJA Year of manufacture: 1990 Power: 200kW, 370A RPM: 1485 rpm Air delivery: approx. 100,000 m3/hour Suction side: diameter 800mm Pressing side: 800 x 620mm Impeller diameter: 1800mm Housing dimensions: 3400x3100x2400 Net weight with engine: approx. 4.5t Aerodynamic control with inlet guide vane, grease-lubricated anti-friction bearings. The machine can be disassembled and transported with a standard truck.
Type: FLC8000/600 Serial number: 371 Year of construction: 2004 Belt width: 600 mm Cooking length: 7000 mm Heating: thermal oil, 180kW Steam: 4 - 8 Bar Cooking time: 2 - 40 min Compressed air: 6 - 10 Bar Power: 3 x 415V, 50Hz, 13kW Dimensions: 9800 x 2000 x 3150 mm Weight: 5850 kg With extra infeed conveyor of 1800 mm Including CIP tank and Bartec hygrophil Switchcabinet separate, not connected to the machine With optional outfeed conveyor of 1500 mm
Turntable diameter: 150mm, max. pallet dimensions X/Y: 800mm/1200mm, max. product height: 2200mm, max. load capacity: 2000kg, rotation speed: 10rpm, lifting/lowering speed: 4m/min, film roll width: 500mm, max. film roll diameter: 300mm, film core diameter: 76mm, max. roll weight: 20kg, film thickness range: 17µm-35mm, machine weight: approx. 350kg. Documentation available. An on-site inspection is possible.
Measuring and marking plate Cast iron Precision surface plate Manufacturer: FUJITA Type:JIS B 7513 Surface size: Length:1500mm Width:1000mm Height:250mm Flatness of the surface used (μm) Accuracy exceeding JIS standards Accuracy according to JIS standards No. 210 (Grade 0): 8 No. 211 (Class 1): 16 Weight: 850kg + support frame: ca 120kg
Key data: 90 , 40 , 510
Air Compressor Atelier Francois CE24A, 510 Nm3/h at 40 bar This three-stage intercooled high pressure compressor was manufactured in year 2008 and the operation was stopped in year 2019 and it was afterwards professionally dismantled. This compressor is very slow speed and it has only two cross-head assemblies, two connecting rods and associated bearings. There is no piston rod packing on 3rd stage, which eliminate sealing against 40 bar. Single acting 2nd and 3rd stage, requiring few valves. Smaller 2nd and 3rd stages are horizontal position to optimize the piston ring life. The delivery includes • AF CE24A high pressure air compressor with electric drive mounted on common base frame • Air-cooled stainless steel 40 bar air dyer with integrated 1-micron filter, dew point alarm and Bekomat drain system, made by Hankison • Horizontal 300 litre hot galvanized 40 bar air re ...
CONTROLS CNC controls HEIDENHAIN TNC 426 WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 3 X-axis travel: 500 mm Y-axis travel: 350 mm Z-axis travel: 610 mm TABLE table surface (left-right): 920 mm table surface (front-back): 380 mm SPINDLE / HEAD spindle revolutions (min): 50 /min spindle revolutions (max): 18000 /min tool fixture: ISO SK 30 TOOL MAGAZINE number of positions: 24 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 2000 mm space requirements -front/back-: 1700 mm total height: 3000 mm total weight approx.: 3200 kg ATTACHMENTS chip conveyor: no coolant unit: yes through spindle coolant attachment: no closed cabin: yes European CE standards: yes Machine in TOP condition - Power ON : ...
Two injection moulding machines are available. 1) Ferromatik K 110 1100-493, year of manufacture: 2000, clamping force: 1100kN, min. mould installation height: 300mm, max. opening stroke: 550mm, screw diameter: 40mm, injection volume: 201cm³. The control no longer starts up properly, probably due to the circuit board. Includes a 3-axis handling robot Remak. Without conveyor belt. 2) Arburg 270 M 500-90, year of manufacture: 1995, clamping force: 500kN, min. mould installation height: 225mm, max. opening stroke: 325mm, screw diameter: 30mm, injection volume: 70cm³. The cylinder is slightly leaking. Documentation available. An on-site inspection is possible.
Inverter heat pumps / chiller air-cooled reversible, Type: iHCY 020 PT1+FSH MTA S.p.A. HCYGNUS TECH Inverter iHCY 020 PT1+FSH are compact heat pumps reversible (heating / cooling) that are suitable for outdoor installation up to -15 / -10°C suction temperature. Including crank pan heater, buffer tank, built-in P1 circulation pump, electric antifreeze heater (evaporator, storage tank and pump) and inverter scroll compressors Heat output kW 6.43 Heating water temp. Exit/inlet: 45 / 40°C Volume flow m³/h 1.13 Available pump pressure bar: 0.84 Ambient temperature °C +7 Cooling capacity kW 5.46 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 0.971 Available pump pressure bar: 0.893 Ambient temperature °C 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 3.06 Max. current (A) 11.43 Starting C ...
Inverter heat pumps / chiller air-cooled reversible, Type: iHCY 020 PT1+FSH MTA S.p.A. HCYGNUS TECH Inverter iHCY 020 PT1+FSH are compact heat pumps reversible (heating / cooling) that are suitable for outdoor installation up to -15 / -10°C suction temperature. Including crank pan heater, buffer tank, built-in P1 circulation pump, electric antifreeze heater (evaporator, storage tank and pump) and inverter scroll compressors Heat output kW 6.43 Heating water temp. Exit/inlet: 45 / 40°C Volume flow m³/h 1.13 Available pump pressure bar: 0.84 Ambient temperature °C +7 Cooling capacity kW 5.46 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 0.971 Available pump pressure bar: 0.893 Ambient temperature °C 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 3.06 Max. current (A) 11.43 Starting C ...
FAS belt conveyor 1090-630-500 RA2426 Manufacturer: FAS Motor: without motor, driven by overdrive Conveyor length (FL): 1090 mm Nominal/outer width (NB): 630 mm Belt width (GB): 500 mm Profile height: 170 mm Drive roller: Head drive Optional: supports Side guide Price: plus VAT from central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: gut Conveying length in mm: 1090 Nominal / outside width in mm: 630 Belt width in mm: 500 Driven: Übertrieb scope of delivery: ohne Motor, without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpa ...
FAS belt conveyor 850-530-400 RA2427 Manufacturer: FAS Motor: without motor, driven by overdrive Conveyor length (FL): 850 mm Nominal/outer width (NB): 530 mm Belt width (GB): 400 mm Profile height: 170 mm Drive roller: Head drive Optional: supports Side guide Price: plus VAT from central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: gut Conveying length in mm: 850 Nominal / outside width in mm: 530 Belt width in mm: 400 Driven: Übertrieb scope of delivery: ohne Motor, without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartn ...
grinding diameter: 1524 mm grinding length: 4400 mm swing diameter: 1524 mm max. workpiece weight between centres: - kg grinding wheel dia. x width: - mm Control: FANUC 18i-TB chucking diameter: - mm spindle motor: 37,2 kW workpiece drive: 29,8 kW spindle speeds (infinitely variable): 450 - 1250 U/min work piece spindle speed: 7 - 42 U/min grinding slide stroke: 4900 mm total power requirement: ca 90 kW weight of the machine ca.: - t dimensions of the machine ca.: 12,5 x 3,6 x 2,8 m - FANUC 18i-TB CNC control - Coolant system & belt filter with separator - Spindle oil cooling - Motor-driven counterholder - 2 steady rests - Splash guard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of floors: 7 Einsätze Width of floors: 1000 mm Depth of floors: . mm height: 1950 mm depth: 600 mm width: 1050 mm Roller shutter defective The technical data is provided by the manufacturer or operator and is therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items Accessories for your workshop If you want to sell machines, production lines, or your business, then talk to us. You can find more offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 500 mm, 400 mm, 400 mm
FP 4M lid with 3-axis active digital display, Table clamping area 800 x 460 mm Travel X / Y / Z 500 / 400 / 400mm Spindle speed 50 - 2500 rpm Feed rate 8 - 630 mm/min Rapid traverse 1500 mm/min Quill stroke 90 mm Tool holder SK 40 Hydraulic Tool Clamp Incl. accessories as shown
x-travel: 620 mm y-travel: 420 mm z-travel: 400 mm Control: Heidenhain TNC 410M table surface area: 800 x 400 mm tool taper: ISO 40 spindle turning speed - stepless: 50 - 4000 U/min main drive motor: 5,5 kW total power requirement: kW weight of the machine ca.: 2,1 t dimensions of the machine ca.: m CNC control HEIDENHAIN TNC 410M Coolant equipment Machine lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
FAS conveyor roller curve 90° 635-500 IR850 RA1990 Technical data: Condition: good (used) Engine: fully functional Angle: 90° Inner radius (IR): 850 mm Nominal/outer width (NB): 635 mm roller width (NUB): 500 mm Pitch: 75-125 mm Motor Type: SEW three-phase motor Engine power: kW 0.15 S1 Hz 50 Funding speed: 0.93 m/sec Drive: Center drive usable width: 500mm The rolls are higher than the frame Scope of delivery: without supports (if necessary please enquiries) Optional: supports Price: plus VAT from central warehouse Dr. Sonntag KG 97076 Wuerzburg Features: nominal voltage: 380-500V Running direction: links/ rechts condition: good (used) Nominal / inner radius in mm: 850 Nominal / outside width in mm: 635 Roll width in mm: 500 angle: 90° Driven: YES Engine type: SEW Eurodrive KW: 0,15 Conveyor speed m / s: 0,93 scope of delivery: without supports and side guides Für eine ...
Inv. Num. : 8618 Type: FTC 350 XLS Producer: FEELER Created: 2014 Parameters: Control System: FANUC Series Oi-TD Switch-on hours: 9330 h Hours: 7081 h Maximum turning length: 870 mm Max. turning diameter: 350 mm Maximum turning diameter over bed: 630 mm Number of Spindles: 2 pieces Maximum spindle speed: 4500 1/min Equipment: Chuck
x-travel: 6000 mm y-travel: 630 mm z-travel: NC-Schwenkkopf mm Control: total power requirement: -- kW weight of the machine ca.: 19,5 t required space: -- m Condition: Used Specification: Vertical CNC machining center Chiron MILL 6000 high speed with NC swivel head Year of manufacture 2004, completely overhauled in 2013 by the manufacturer Chiron - Siemens 840D (PCU50, NCU572.4) - NC swivel head - Long part machining up to max.: 6,000 mm - Machining of the front side, horizontal with swivel head right/left - Pendulum machining via center partition wall max.: 1,773 mm - 4 hydraulic double vices - High-speed package: - Motor spindle D 12,000 rpm, 140 Nm - Travel distance X: 6,000 mm / Y: 630 mm - Rapid traverse in X/Y/Z: 60 m/min - Production package: - Crown belt conveyor, ejection height 1,050 mm - IKZ preparation - KNOLL VRF250 vacuum rotary filt ...
Manufacturer: Freight Model: FL80 Year of Manufacture: 2002 Type of Machine : geotechnical drilling unit 10 wheels 8.3 L cumins engine. Perfect mechanical condition CVM good until April 2026 Equipment: CME-75 2002 Low torque mounted Find more here - / Contact us at -
Transnorm belt curve conveyor left 30°-1270-1100-IR900 RA2303 Technical data: Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees middler conveying speed (v m/s): 1,0 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 1,5 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2021 condition: new Nominal / inner radius in mm: 900 Nominal / outside width in mm: 1270 Belt width in mm: 1100 angle: 30° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive K ...
length: 1000 x 600 x 300 mm table load: 300 kg total power requirement: 1,1 kW weight of the machine ca.: ca. 350 kg dimensions of the machine ca.: 1,30 x 1,00 x 2,65 m LACHNIT Tilting and Lifting Device Stainless steel column, welded steel container Container dimensions: 1000 x 600 x 300 mm Discharge height: 1.460 mm Control via push-button at column and pendant control panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A package of eleven Dyeing Machines is available, 1) 5x Dyeing Machine Airflow AFT 225, 2) 1x Dyeing Machine Then AFS 50, 3) 1x Dyeing Machine Then AFE 50, 4) 1x Dyeing Machine Fongs HST 130/32, 5) 1x Dyeing Machine Then DN 200, 6) 2x Dyeing Machine Then OFHT 170. An on-site inspection is possible.
An SMT pick-and-place system that can be used as a standalone or inline machine. With single head with laser centring, upward-facing camera and display. Voltage: 230V, the machine has been regularly serviced, with accessories. On-site viewing is possible.
x-travel: 4000 mm y-travel: 1000 mm z-travel: 1500 mm Control: Heidenhain 355 weight max.: 10 t head swivability: ° : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Type: Gas Insulated Switchgear (GIS), SF6 insulated Configuration: 4 panels (Incoming Feeder, Voltage Measurement, Bus Coupler, Outgoing Feeder) Rated voltage: 24 kV Rated current: 400 A (feeder & coupler panels) Short-time withstand current: 12.5 kA / 1s Breaking capacity: 31.5 kA Frequency: 50 Hz Standard: IEC 62271-200 Manufacturer: Schneider Electric / Areva Year of manufacture: 2007 Condition: Used, in good working order
length: 2,5 mm width: 2,5 mm height: 2,4 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Conveyor belt width: 105mm, drive motor power: 0.37kW, installation dimensions: 1600x1380.5mm, height: 725mm. Includes operation and maintenance manual, conveyor belt, guide frame, feet, drive motors, power supply and additional elements. With extensive documentation, the machine is completely dismantled. An on-site inspection is possible. The conveyor belt can be assembled in various ways.
Year: ca. 1970 magnetic plate size: 520 x 200 mm weight of the machine ca.: 1,4 t Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Undercarriage for edge banding machines Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). But it certainly also fits on other machines, e.g. Brandt (might have to be adjusted a bit) Length of the U-profiles approx. 1130mm Body height incl. castors approx. 150mm 4 sturdy steel castors as swivel castors with grease fittings 2 Brakes 2 support plates for height compensation The machine can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".
2x Fristam FKFS40 Lobe pump - 2,2 kW - Small difference in the delay between the pumps - Excellent condition
FBM PLASTIC AGGLOMERATOR USED, RECONDITIONED, for film, fibers, flakes of LDPE LLDPE HDPE PP PA PS EPS, etc, Average output 200-400 kg/h depending on materials and moisture content, Including LOADING BELT with side walls to feed the machine 1.000 mm. diam.steel barrel, complete with vacuum vent prepared to convey steam into an exhausting steam system (not included), sturdy steel rotating and fixed knives on bottom of the barrel, 110 kW, Hp 150 main engine,, side hatch, with safety device, for inspection and knives replacement, Grease lubricating system for motor bearings Control panel Driven discharging hopper 1,5 Hp This machine is offered totally RECONDITIONED, Compliant to CE regulations, You might be interested also in our [ROTO-CLASSIFIER](.germanplast.eu/listings/4115659-roto-classifier), [VERTICAL MIXER](.germanplast.eu/listings?q=VERTICALMIXERS), [BAG FILLING STATION](.germanplas ...
Dairy Machinery UK Farm Milk Cooling Tanks, Space saving, ergonomic design-chassis with solid leg construction and adjustable feet., Constructed completely from AISI 304 Stainless Steel, welded and polished to global food grade standards.Insulated with CFC free polyurethane, thickness varying from 38mm at the top to 100mm at the bottom, adding extra strength to the structure., Laser Welded S.S 304 Evaporator (0.9/1.5/2mm). Milk Cooling Tank consists of milk vessel made from 1.5mm S.S 304 and insulation vessel made from 1mm S.S 304., Detachable Butterfly valve-DN 50, SMS thread One piece top Lid made from S.S 304 with thickness of 1.5mm mounted with pneumatic springs to allow easy and safe opening and closing of the tank. Gear motor with micro switch for gentle agitation of RPM 30-36,1Φ-50Hz from Dairy Machinery UK, Make: Dairy Machinery UK, Model: FMCT-200 L , Capacity: 210 Litres , Coo ...
Farmer EL2100 Welder 230 and 400V With cooling fan and driving equipment
Height=1.33 m, Overall length= 0.8 m, Overall width= 3.1 m, Net weight= 495 kg,
Height=1.62 m, Overall length= 0.76 m, Overall width= 0.76 m, Net weight= 480 kg,
Height=1.16 m, Overall length= 0.48 m, Overall width= 0.52 m, Net weight= 132 kg,
Height=1.1 m, Overall length= 0.5 m, Overall width= 0.62 m, Net weight= 140 kg,
Height=1.3 m, Overall length= 0.8 m, Overall width= 1.86 m, Net weight= 204 kg,
Height=0.35 m, Overall length= 0.9 m, Overall width= 1.1 m, Net weight= 63 kg,
Height=0.825 m, Overall length= 0.64 m, Overall width= 0.6 m, Net weight= 57 kg,
Height=0.33 m, Overall length= 0.24 m, Overall width= 0.7 m, Net weight= 20 kg,
Height=1.14 m, Overall length= 0.52 m, Overall width= 0.52 m, Net weight= 140 kg,
Height=1.23 m, Overall length= 0.7 m, Overall width= 0.76 m, Net weight= 360 kg,
Height=3 m, Overall length= 6 m, Overall width= 12 m, Net weight= 5000 kg,
Height=1.54 m, Overall length= 0.63 m, Overall width= 1.1 m, Net weight= 160 kg,
Height=2.015 m, Overall length= 1.2 m, Overall width= 1.455 m, Net weight= 570 kg,
Height=1.99 m, Overall length= 0.81 m, Overall width= 1.52 m, Net weight= 310 kg,
Height=1.95 m, Overall length= 1.25 m, Overall width= 1.16 m, Net weight= 350 kg,
Height=1.85 m, Overall length= 1.31 m, Overall width= 4.56 m, Net weight= 1295 kg,
maximum number of results exceeded
please refine your search
