mbo f 520 used for sale

6-Axis AC Servo Drive, Servo Actuator, Servo Inverter, Servo Amplifier, Servo Controller, Frequency Converter, Drive Controller for RobotFANUC Type A06B-6105-H003No. V07Z08282NEU / unusedInput voltage: 200 - 240 VACNornpower: 1.5 kWAnnumber of axis outputs: 6Output current: 6 x 13 AGtotal output current: max. 78 AManual No.: B-81465Standard: EN50178Installed circuit boards: A16B-2000-0063/07D A16B-3200-0440/05C- Plexiglass cover not includedDimensions W x H x D 70 x 170 x 380

Mechanical pull-down NC Machine vise FRIBOSA Type Size BPrision machine vice, grinding vice, clampJaw width 100 mmJaw height 34 mmWingspan 0 to 130 mmGuideway height 40 mmGuideway length 270 mm- Mechanical machine vice- Clamping area via trapezoidal spindle- Stable base body ground on all sides- Can be clamped horizontally, vertically or laterallyDimensions L x W x H 310 x 100 x 77 mmWeight: 10 kgGood condition; used

E-Chain Hoist, Electric Hoist ELEPHANT / FBH (Japan) Type F(S)2-A(B4-B6)M(P-G)Fabr. No. 03278 Year of construction 1997Lifting capacity: 2000 kgHook travel 2.6 metersHood lifting speed 3.8 m/min. Fine stroke speed 1 m/min. Chain size 7.1 x 21 / quality class 8Cable length operating bottle approx. 2.5 metersMains connection 400 volts, 50 Hz.2 load trains = 2000 kg- emergency offdead weight 70 kggood condition; used

Writing desk, rolling desk, shelf trolley, logistics trolley, shelf trolleyTransport trolley, platform trolley, workshop trolleyFETRA Type 5834Writing surface height: 1100 / 1190 mmWriting surface: 605 x 585 mmStorage shelves: 600 x 495Load capacity per shelf: 50 kgTotal load capacity: 100 kg- Rolling desk made of tubular steel and profiled steel screw construction, powder-coated, blue RAL 5007- Writing surface on wooden board with stop rail, approx. 10 inclined- 2 shelves, variably screwed in (2 folder heights possible)- 4 pieces Swivel fixed castors (125 mm) with plastic rim and

Hydraulic guillotine shears FASTI type 509 - 25/4Masch. No. 5418 Year of construction 1991Cutting length 2535 mmCutting thickness 4 mmBack gauge 5-1000 mm (controlled)Cutting angle adjustableHydraulic pressure max. 290 barMotor power 7.5 kWNeching connection 400 volts, 50 Hz- Back gauge with positioning control ELGO ELECTRIC Type 85- Sheet metal holding device under the back gauge- Manual cutting gap adjustment with dial gauge display on the right and left- Stepless cutting length adjustment- Hydraulic

Doka Frami framed formwork 3,00m Light and manhandled steel-framed formwork for foundations, walls and columns The lightweight Frami formwork, with its sturdy hot-dip galvanised steel frame, ideal for fast and, with or without a crane. Can be put to use quickly, anywhere thanks to its many practical details Cost-effective because of its outstanding system attributes Easy handling and planning thanks to practical panel size-grid Superlative concrete results thanks to the system's extra-rugged build Price € 29.922,00

Hydraulic 30 ton C-Frame Press CAVENAGHI & RIDOLFI Technical data Nominal Power : 30 ton Year of manufacturing: 1973

Hydraulic 60 ton C-Frame Press CAVENAGHI & RIDOLFI Nominal Power : 60 ton Year of manufacturing: 1975

Manufacturer : FRAVIZEL Model: Lynx + Halley MFCR55 Type of Machine : wire saw systems for block mining in a quarry. Year of Manufacture: 2022 Commissioned: 2023 Condition: The machine is relatively new and have seen little use. Find more here - / Contact us at -

Manufacturer: FRAVIZEL Model: Kepler MFR55 Year of Manufacture: 2023 Commissioned: 2023 Type of Machine : wire saw systems for block mining in a quarry. Condition: The machine is relatively new and have seen little use. Find more here - / Contact us at -

Manufacturer: FRAVIZEL Model: Zenith MFFR90 Year of Manufacture: 2022 Commissioned: 2023 Type of Machine : Drilling Rig Condition: The machines is relatively new and have seen little use. Find more here - / Contact us at -

Key data: 132 , 40 , 750

Year of construction 2015 Capacity: 750 m³/min. Delivery pressure: 40 bar Rotation speed 330 rpm. Electric motor 132 kW incl. refrigeration dryer The PET compressor is in mint condition, with few operating hours

Qty. 1 Second-hand lathe CNC machine Manufacturer: VERNET BEHRINGER Machine type: FG 2005 CNC Definition: Sheet metal drilling line Year of construction: 2012 Voltage supply: 380 V, 3 ph., 50 Hz, Ground Control voltage: 24 V DC Installed power: 90 kVA Hydraulic unit: 15 l/min Central motor power: 4 kW Medium pressure: 130 bar Oil volume: ≈120 liters Limits of sheet metal dimensions to be machined Min. section: 100 x 100 x 5 mm Max. section: 2000 x 1000 x 40 mm & 1340 x 1000 x 60 mm

SEVAL is a type of machinery often used in the packaging industry, particularly for filling sachets with a variety of products. Sachet fillers are designed to efficiently fill small, often single-use packets with goods such as powders, liquids, granules, or even solid items., Key Features of SEVAL Sachet Fillers:, - Versatility: SEVAL sachet fillers can handle different types of products, making them suitable for various industries including food, pharmaceuticals, cosmetics, and chemicals., - Automation: These machines are often semi-automatic or fully automatic, enhancing efficiency and reducing the need for manual labor. They can integrate with other packaging systems for a streamlined process., - Speed and Efficiency: SEVAL fillers are designed to operate at high speeds while maintaining accuracy in filling volumes. This is crucial for high-volume production settings., - Precision: Th ...

Robot FANUC ARC Mate 120iC Année 2012 6 axes Charge utile : 3 KG Portée : 1811 mm Répétabilité : 0,08 mm Poids. : 250 kg

Travel X/Y/Z: 1300mm/900mm/1000mm, table dimensions X/Y: 2000mm/750mm, max. table load: 5000kg, rapid traverse: 6m/min. Machine dimensions X/Y/Z: approx. 3650mm/2700mm/2700mm, weight: approx. 9000kg, control: Heidenhain TNC 150. Documentation available. An on-site inspection is possible.

Conveyor - Wittmann Feedmax S3-NET / New, unused (6 pcs.) Year of manufacture: 2023 Location: Lodz, Poland Description: Suction conveyor with a hose and suction probes The conveyor has its own control system. On the control system, you can set the proportions in which the raw material is to be transported It is possible to buy a plastic container as well as a proportional valve for transporting 2 raw materials, e.g. regrind and original Price: On request

FIMIC RAS 325 SCRAPER, fully automatic screenchanger, screening surface 77.900 mm², Throughput: up to 600 kg/h depending on material and contamination, with scraping system, suitable for extrusion lines with capacity up to ca 500 kg/h or more depending on screening, Just disconnected, excellent conditions, constructed in 2017, immediately available, We can supply spare screens for this machine at competitive prices., Laser screen from 80 to 300 µ - Mesh from 180 to 50, Punched screen from 400 to 2.000 µ - Mesh from 40 to 10, availability: immediate, type: fully automatic

Roaches 3 Bath Laboratory Dyeing Machine Roaches 3 Bath Laboratory Dyeing Machine 400 V 6600 W 10 A HxWxD= 920 x 1760 x 450 mm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Max. diameter of the cut material ... 200mm Main engine power... 2.2kW Machine weight ... 170kg

Roaches 3 Bath Laboratory Glass Dyeing Machine Roaches 3 Bath Laboratory Dyeing Machine 240 V 6500 W 10 A HxWxD= 920 x 1760 x 450 mm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Manufacturer:Flurial Type : Bag Packaging Line Year of Manufacture: 2001 - Output: up to 30 big bags per hour - Footprint: approximately 11 meters long by 3 meters wide - Height: approximately 3.70 meters - Currently used for filling big bags up to 180 cm in height and up to 1,250 kg in weight Find more here - / Contact us at -

weight: 100 kg : 2 Stück height: 700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3050 mm table width: 1525 mm burner heads: 1 Control: Mazatrol PreviewG workpiece weight: 930 kg traversing speed: 120 m/min laser capacity in Watt: 6 kW cutting width: bis 25 mm x-travel: 3110 mm y-travel: 1595 mm z-travel: 110 mm weight: 15200 kg total power requirement: 41 kW dimensions of the machine ca.: mm NEW and UNUSED Machine Laser cutting machine with automatic shuttle table - Mazatrol PreviewG CNC control - 2 pallets - Multicontrol cutting head (Optiflex) - Donaldson DFPRE-4L SPKTRP (7,5kW) extraction system - CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine is in good technical condition, a visit and a test run are possible by prior arrangement.

Column Drilling Machine FLOTT type 16 STG/R2 Spindle: CM2 Spindle exit: 100 mm Spindle speed: from 80 to 2000 RPM Table size: Length 340 mm x Width 280 mm Maxi distance spindle nose/table (lower table): 400 mm Throat depth: 240 mm 2 speed motor 2,2 kW Drilling/tapping function Adjustment by belt variator Electronic RPM speed not working Voltage: 380 V Width: 500 mm Depth800 mm Total height: 1100 mm Weight: approx 150 kg

WMW HECKERT FU450R-51 universal milling machine was built in 2009 in Belarus by Gomel Machine Tool Plant S.M. Kirov.. This extremely versatile, functional and reliable machine is designed for precision machining of workpieces with a maximum weight of 1500 kg. The machining process is performed by a powerful spindle on a large work table. T-slots in the table allow for quick installation of additional tooling such as a vice. The precision and repeatability of the manufactured parts, in turn, is maximised by the design made of the highest quality cast iron, which maintains excellent stability during even the most intensive challenges. All this makes the offered FU450R conventional milling machine an excellent choice for both unit and series production. The WMW HECKERT vertical milling machine weighs 4300 kg. Technical specifications of the WMW HECKERT FU450R-51 milling machine - number ...

Max distance between points: 1000 mm, Max travel Z axis: 650 mm, Max travel X axis: 254 mm, Height of points: 175 mm, Max. diameter to be rectified: 350 mm, Main engine power: 7.5 Kw, Max. piece weight: 130 Kg, Control type (CNC/manual): CNC, CNC brand: FANUC, CNC model: Oi-TF PLUS, Grinding wheel dimensions: Ø500 x Ø203 x 80 mm, Angle of inclination of the work wheel head: + / -8.5°, Long: 2500 mm, Width: 2300 mm, Height: 2000 mm, Weight approx.: 3500 Kg

Operating terminal for Fette tablet press Manufacturer Greases Ident No. 2138599 Series No. 4502990047/009

Incubator Manufacturer: Thermo Scientific Forma Steri-Cycle Model 371 Year of construction 2014 Very good condition The Thermo Scientific Type 371 CO2 Incubator is ideal for sensitive incubation applications and ensures optimal cell growth. This CO2 incubator can be used in bio tissue engineering, in vitro fertilization (IVF) clinics, and academic hospitals, among others. Specifications Voltage: 230V, 50/60Hz Current: 4.4A Temperature range: + 5 °C above ambient temperature up to 50 °C CO2 range: 0 – 20% Capacity: 184 L External dimensions (W) x (D) x (H): 66 x 64 x 98 cm Inner dimensions (W) x (D) x (H): 47 x 47 x 65 cm

Key data: 1100 kN, 254 g/PS, 45 mm

Used Ferromatic K110D-S plastic injection moulding machine. New 2000. Technical specifications of the machine: · Manufacturer: FERROMATIK MIALACRON. · Model: K110D-S. · New: 2000. · Clamping force: 1100 kN. · Injection volume: 254 cm3. · Screw diameter: 45 mm. · Maximum distance between plates: 800 mm. · Control: IQT44. · Machine weight: 5500 kg. Technical documentation. The machine is regularly serviced, fully functional and ready for use.

Key data: 1100 kN, 99 g/PS, 30 mm

Used Ferromatic K110D-S plastic injection moulding machine. New 2000. Technical specifications of the machine · Manufacturer: FERROMATIK MIALACRON. · Model: K110D-S. · New: 2000. · Clamping force: 1100 kN. · Injection volume: 99 cm3. · Screw diameter: 30 mm. · Maximum distance between plates: 620 mm. · Control: IQT33. · Machine weight: 5500 kg. Technical documentation. The machine is regularly serviced, fully functional and ready for operation.

Key data: 3000 mm, 1500 mm, 4000 W

3000 x 1500mm / 4000w / MP FLEXIT Automatic loading & unloading

spindle diameter: 125 mm x-travel: 2000 mm y-travel: 1100 mm z-travel: SK 50 mm spindle taper: Philips 2500 digital readout: Pfillips turning speeds: 925 U/min spindle stroke: 800 mm Table: 1000x1400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ...

We have the following equipment available for sale immediately. Two FRANCE TRANSFO SCHNEIDER ELECTRIC 1250 kva and 850 kva cast resin dry type voltage converter. years of construction 2003. Transformers they have hood which has been dismantled to facilitate extraction which are available in our warehouse

x-travel: 4500 mm y-travel: 3800 mm z-travel: 1850 mm column daylight: Z = 1900 mm column daylight: Y = 5330 mm table surface area: 4500 x 4600 mm table load: 50 t milling head speed: 40 - 2000 U/min feeds x/y/z -stepless: 6 - 4000 mm/min rapid travel x/y/z: 6000 mm/min milling drive: 40 kW milling spindle diameter in the forward pos.: 160 mm tool taper: Steilk. 60 milling spindle quill diameter: 260 Control: Siemens 840D total power requirement: ca. 60 kW weight of the machine ca.: 115 t dimensions of the machine ca.: 10,0 x 5,0 x 5,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 4040 mm, 4 mm

Max. cutting length: 4040 mm Max. sheet thickness: 4 mm steel Motorized adjustable backgauge with digital display up to 1000 mm Pneumatic sheet hold-up Side stop and table extensions Cutting length limitation Cut edge lighting Weight approx. 7500 kg

Used head machine KÖNIG, type: Mini Rex Futura AB -in good bakery condition- - Head machine / dough divider: KÖNIG Mini Rex Futura AB - Knitting roller: SKG54 and RKG58 for round and square dough pieces - 2 rows - Weight range: 25 - 75 g for round - Weight range: 40 - 85 g for square ones - Capacity: max. 2,000 pcs./h - Band very good condition - Condition: Very good, ready to use Suitable for wheat and rye doughs (up to 40% rye content). Visits and test runs are possible by arrangement.

Universal table router FZ0 from Zimmermann Model milling machine with adjustable Bosch motor GGS 27 LC Ideal for use in model making and mould making. Drive motor 230Volt, 0.6kW Spindle speed adjustable approx. 12000 to 27000 rpm Machine table approx. 590 x 420mm Unit swivel on both sides up to 90 degrees Longitudinal stop with fine adjustment Extraction hood and protective hood Collet holder 6mm and 8mm Including the milling cutters and burrs shown With lockable base cabinet, 2 drawers and a door, key provided The base cabinet was provided by the previous owner with an aluminum sheet over angles, which offers an integrated extraction option, see photos Waldmann surface-mounted lamp with attached magnifying glass Original paint, dabbed in places CE mark Very well maintained machine from prototype production in the motorsport department of a Wolfsburg car manufac ...

Industrial robots, almost unused --> incl. control: Siemens Simatic HMI --> control panel with touch screen display; Manufacturer : Fruitcore Robotics GmbH Type : Horst 900 Year of construction : 2021 Number of axes : 6 Maximum load capacity : 5 kg (nominal load 3kg) Reach : 905 mm Spare parts : Spare parts procurement is possible.

spindle diameter: 225 mm x-travel: 8000 mm y-travel: 5600 mm z-travel: 2100 mm w-axis: 1400 mm spindle turning speed - stepless: 0-650 U/min spindle taper ISO: 60 feed stepless: 5 - 3000 mm/min rapid traverse: 5 m/min weight of the machine ca.: 150 t dimensions of the machine ca.: 12 x 5 x 8 m total power requirement: 120 kW Ram type horizontal boring machine was reconditioned and modernized in 2006, original yom was 1972. Control Siemens 840 C. Machine will come with tools and a vertical milling head. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production li ...