mbo f 520 used for sale

Manufacturer: Langzauner, Type: FPS Hydromatik, Control: yes, Longitudinal cutting guillotine: yes, Cutting lenght mm: 3100, Schnittbreite min-max mm: 600, Working hight mm: 50, Required space L x W x H mm: 3900x1170x1500, Wight approx. kg: 3200,

Manufacturer: Filteranlage, Control: yes, Volume flow rate m³/h: 22000, Filter surface in m²: 138, Gesamtanschluss kw: 30,

Manufacturer: Filteranlage, Filter system - positive pressure: yes, Filter hoses: 42, Hose diameter in mm!: 180, Length of filter tubes: ca 1500, Electronic control board: yes, Number of fans: no, Collecting tank quantity: 5, Suction pipe diameter 1 mm: 180, FREE TEXT: mit Abrüttelung,

Manufacturer: Bürkle, Type: Chromwalze für SLC 1300 174 D/1416 mm länge, FREETEXT1: Länge 1416 mm, FREETEXT2: Durchmesser 174 mm,

Manufacturer: Siemens Permanent Magnetmotor, Type: 1 FT5076 1AF711 , Model: NOE H210 0577 S7 001,

Manufacturer: Friz, Year: 1996, Type: MFP 12 Masterform, Number of tables: 1, Heating system: elektrisch, Nutzfläche : 1.100 x 2.400, Press length mm: 1.400, Pressing width mm: 2.700, Work piece thickness max mm: 300, Membrane: yes, Kw Heizleistung obere Heizplatte: oben 24 + unten 11, Membrane: yes, Size of heating plate mm: 1.400 x 2.700, Pressing cylinder: 6, Landing opening mm: 315, Overall pressing pressure kN: 320 bar, Weight approx. kg: 20.000, Year :1996

Manufacturer: Rollgang angetrieben für Lackstrasse, Working length mm: 950, Working widht mm: 1300, Total hight mm: +/- 980, Frequency converter: yes, Total hight mm: +/- 980, Engine power kW: ca.0,5, Feeding speed min-max m/min: 10-25, Working hight adjustable mm: yes, Manufacturer: Rollgang angetrieben für Lackstrasse, Working widht mm: 1300, Total hight mm: +/- 980, Roller pitch mm: 150, roller diameter: 45, Feeding speed min-max m/min: 10-25, Working widht mm: 1300,

Manufacturer: Farbmischer, Type: Biaxo , Year: 2008, Control: Not Aus/an-aus/Frequenzregelung Mischbetrieb, Year :2008

Manufacturer: Hochleistungspumpe für Hochviskose Flüssigkeiten, Type: Siemens, Year: ca.2005, Control: Schaltschrank, Elektr. pump: yes, FREE TEXT: Motorleistung 1,8 kw/50 Hz, Year :ca.2005

Manufacturer: Purete, Type: PRT-F1113, Year: neu, Operating side: rechts, Auftragswalzengeschwindigkeit m/min.: 0 - 20, Gummierte Auftragswalze mm: 1.450, Verchromte Dosierwalze mm: yes, Dosierwalzenbreite mm: 1.450, Glättewalzenbreite mm: 1.450, Work piece width min-max mm: 1.320, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 2 - 80, Working widht max mm: 1.320, Feeding speed min/max: 0 - 20, Wight approx. kg: 1.700, Required space L x W x H mm: 1.600 x 2.575 x 1.700, Year :neu

Manufacturer: Formoplast, Type: PE 100 Doppelwandbehälter, Year: 2014, Durchmesser m: 2,5, Zulässiges Füllvolumen m³: 15, Zulässiges Füllhöhe m: 3,06, Zulässiges Füllungsgrad : 95 Prozent, Betriebstemperatur Grad: 20, Befülltemperatur Grad: 30, Zulässiger Volumestrom m³/h: 72, Zulässiges Belastungswert kN/m³: 15, Füllmedium: Kauritleim, Aufstellung: im Raum, Year :2014

Manufacturer: Bürkle Hymmen, Type: Lackierstrasse für Faserzementplatten, Year: 1993-2001, Finished product: Decklackierung, Work piece width min-max mm: 30-1300, Min.-max. workpiece height in mm: 10-60, Min.-max. workpiece length in mm: 300, Feeding speed min-max m/min: 10-25, Düsentrockner1: Vorwärmung, Lackwalze 1: Hymmen TLX, IR-Trockner 1: 6 Lampen, Lackwalze 2: Hymmen TLX, IR-Trockner 2: 6 Lampen, Lackwalze 3: Hymmen TLX, UV Trockner 3: 3 Lampen 80 watt, Year :1993-2001

Manufacturer: Wagner, Type: Finisch 500, Year: ca.2005, Wasserbasierend Lacke: yes, 2K-Lacke möglich: yes, Elektr. pump: yes, Laquer reservoir litres: ca.10 Liter, Flushing circuit: yes, Movable: yes, Spray gun manufacturer: Wagner, Spraying stations: 1, Fast exchange system spray gun carrier: yes, Laquer circles: 1, Laquer system - airless: yes, Electrical power consumption kW: 2,8, Transmission ratio: 250 bar, Conveying output l/min: 5,7, Delivered checked: yes, Wight approx. kg: 52, FREE TEXT: 220 Volt/2,8 Kw/Gewicht 52 Kilo/zusätzliche Schläuche/2 Stück Sprühlanzen/ , Year :ca.2005

Manufacturer: Commander SE Frequenzumrichter, Type: SE 23400150 SE 2.5 T, Serial number: 3781484007, FREE TEXT: kw 1,5, Free text 1: 50-60 Hz, Free text 2: Ampere 6,4-4,2,

Manufacturer: Klöckner Möller AMX Frequenzumrichter, Type: AMX3-460-16-400, FREE TEXT: ULN:460 F:50/60, Free text 1: UN: 460V , Free text 2: IN 16 Ampere,

Manufacturer: 2 StückPerske, Type: Ritzmotor Homag FPL 526, Motor with gear: KNS 51.14-2 D, From machine: Homag Maschine, Spindle length mm: ca.60, Diameter of the spindle mm: 30, Power kW: 1,0/2,0, Volt/Hz: 50-60-120, pm: 2750/5700/3380/6920, Motor with gear: KNS 51.14-2 D, Price per unit Euro: 600, FREE TEXT: Spindeldurchmesser 30/Länge mm ca. 55 mm,

Manufacturer: Commander SE Frquenzumrichter, Type: SE 23400150, Model: SE 2,5 T, Serial number: 3781643022, Hz: 0-1000, FREE TEXT: kw 1,5, Free text 1: Ampere 6,4-4,2,

Manufacturer: Stöber, Type: FBW 1060 X, Serial number: 20922/392, mH/Hz: 100 Hz, Power Output: 3 x 220,

Manufacturer: Homag, Type: Ritzsäge Nachschwenkeibrichtung für links und rechts, From machine: Homag FPL, Shaft dimensions L x D mm: 1200,

Manufacturer: Stöber Frequenzumrichter, Type: FAS 1015/B, Serial number: 794, Serial number: 1167218,

Manufacturer: Stöber Frequenzumrichter, Type: FAS 1015/B-1, Serial number: 1292, Power Output: 1,5 KVA,

Manufacturer: Stöber Umrichter, Type: FDS 1030 B, Serial number: 67825, Serial number: 1163144,

Manufacturer: Stöber Frequenzumrichter, Type: FAS 1015/1, Serial number: 0193, Power Output: 1,5 KVA,

Manufacturer: Stöber Umrichter, Type: FAS 1015/B, Serial number: 794, Systemconfiguration: 1167218,

Manufacturer: Stöber Umrichter, Type: FAS 1015/B, Serial number: 1167218/794,

Manufacturer: FIDI Destlliergerät, Type: RS 250 AX, Year: 2016, FREETEXT1: Füllkapazität 20-30 Liter, FREETEXT2: Kesselvolumen 40 Liter, FREETEXT3: Lösungsmittel 4-5 Stunden, FREETEXT4: Spülwasser ca.12 Stunden, FREETEXT5: Abkühldauer 3-7 Stunden, FREETEXT6: Betriebtemperatur 50-200 Grad, FREETEXT7: Kw Leistung ca 2,1, Year :2016

Manufacturer: Fomad, Type: PT-6,1, Year: 2010, Working length mm: 6000, Working widht mm: 1750, Total hight mm: 900, Engine power kW: 1,1, Year :2010

Manufacturer: Felder, Type: MG 580-1, Year: 2012, Control: yes, Min-max edge material mm: 0,4-5, Work piece width min-max mm: min. 70, Min.-max. workpiece length in mm: min. 140, Min.-max. workpiece height in mm: 8-60, Min-max feed m/min: 11, Premilling: yes, Mitre stations: yes, Weight approx. kg: 990, Year :2012

Manufacturer: Fezer, Type: Vakuumauger, Installation height: ca 900, Saugtraverse : 300x100 mm,

Manufacturer: Fischer Paketabstapelung, Type: ASG-4, Year: 89, Work piece width min-max mm: 250, Min.-max. workpiece length in mm: 1500-5000, Min.-max. workpiece height in mm: 8-20, Number of stacks: 1, Stack height in mm: ca.1000, Feeding speed continous adjustable: yes, Erection in a pit: no, Year :89

Manufacturer: Italpresse, Year: 2005, Type: Lock Form SS AIR , Work piece width min-max mm: 1330, Min.-max. workpiece length in mm: 2680, Min.-max. workpiece height in mm: 55, Heating system: elektrisch, Max. temperature °C: 150, Placing table: 2, Size of heating plate mm: 1450 x 2800, Pin system: no, Multifunktionsrahmen: yes, Automatical glue supply: yes, Year :2005

Manufacturer: Fleck Söhne, Type: DG 46, Year: 2007, Cutting lenght mm: 4600, Year :2007

Manufacturer: Homag, Type: FKR 78/C/A/S3, Monting of the machine: zerspanerteil zum Einkürzen, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 10-40, Min-max feed m/min: ca.18, Infeed table: yes, Premilling: yes, Fine milling: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius scraper: yes, Flat scraper: yes, Bonding part EVA: yes, Work piece refeeding: Bargstedt, Roller/belt: Riemen, Compressed air bar: 6, Return type: Bargstedt TFU,

Manufacturer: Dete Vorwärmgerät für Lack, Type: 32Ex 1 R, Year: 2000, FREETEXT2: 3,5 Kw, FREETEXT3: Ex geschütz, FREETEXT4: Regelbar Temperatur, Year :2000

Manufacturer: Italpresse, Year: 2000, Type: Lock Form SS AIR , Control: 1330, Number of tables: 2680, Automatisches Rüsten: 55, Work piece width min-max mm: elektrisch, Min.-max. workpiece height in mm: 150, Press length mm: 2, Membrane: 1450 x 2800, Foil magazin spaces: no, Foil types: yes, Brushing machine: yes, Year :2000

Manufacturer: Friz, Year: 1997, Type: MFP 22/14/11, Press length mm: 1100, Pressing width mm: 800, Work piece thickness max mm: 95, Year :1997

Manufacturer: Filteranlge, Control: yes, Year: ca.2000, Filter system - positive pressure: yes, Volume flow rate m³/h: ca.30000, Filter surface in m²: 280, Number of filter filter gallerys: 1, Return air capable: yes, Vibrator motors: yes, Star feeder: yes, Electronic control board: yes, Number of fans: 2, 1st transport fan - bunker kW: yes, Suction pipe diameter 1 mm: 560, 2nd Exhaust fan kW: ca.22, Year :ca.2000

Manufacturer: Homag Druckzone 6-fach, Spare part from machine: KL 79, Type: Formsttrecke, Year: ca.95, Rollers: yes, Free-standing: yes, Roller size: ca 40 mm, Gluing part right side: yes, Year :ca.95

Manufacturer: Finnrose, Type: Transportband, Year: 1990, Working length mm: 4500, Working widht mm: 1300, Total hight mm: 950, Engine power kW: 1,2, Feeding speed max m/min: 2,5-10, Feeding speed continous adjustable: yes, Working hight adjustable mm: yes, Year :1990

Manufacturer: Weeke, Year: 1996, Type: Frässpindel, Motor mit Getriebe: Werkzeugaufnahme HSK 63, aus Maschine: BP 155, Power kW: 7,5/10, N1-U/min: 750-18000, Motor mit Getriebe: Werkzeugaufnahme HSK 63, FREE TEXT: inkl Drehmotor für C Achse, Year :1996

Manufacturer: Elektronikkarte Heesemann Kuhnke Rollensteuerung, Type: für Heesemann Druckbalken signale, FREE TEXT: Rollensteuerung 42444100,

Manufacturer: Ferrocontrol, Type: NG 24, Model: Nr.262, Serial number: Bauyeshr 1993,

Manufacturer: Homag, Type: Drehgeber für Strecke, Serial number: 2-083-02-7010,

Manufacturer: Italpresse, Year: 2002, Type: Lock Form SS AIR , Work piece width min-max mm: 1330, Min.-max. workpiece length in mm: 2680, Min.-max. workpiece height in mm: 55, Heating system: elektrisch, Max. temperature °C: 150, Placing table: yes, Size of heating plate mm: 1450 x 2800, Pressing cylinder: 2, Pin system: yes, Automatical glue supply: yes, Year :2002

Manufacturer: Haberkorn, Type: FZS, Year: 1996, Trimming saw: oben, Durchmesser Säge: 400, Saw kW: 3, rotations controlled: 2800, Length lifting spindle mm: 252, Diameter of the spindle mm: 40, Spindle travel range total mm: 220, Travels of spindle: 1, Milling spindle kW: 40, rotations controlled: 2800, Working stations: 2, Angular adjustment horizontally: +/- 65 °, Hauptmotor kW : 9, Wight approx. kg: 2000, Feeding - manually: yes, Mitre Window: yes, Spannsystem: 2 Druckluft-Spanner, Exhaust diameter mm: 1x100 + 1x 180, Required space L x W x H mm: 2225x1720x1835, Year :1996

Manufacturer: Ima Fräsständer, for left machine side: yes, Number of motors: 2, Motor : KCS.71.16-2.0 Perske, kW-Leistung : 4,4/6,6, Volt/Hz : 50/100, Drehzahlen U/min : 2860/5870, Pneumatically controlled: no, Slewable horizontally: no, kW-output 2: ca.0,75, Volt/Hz 2: 133, Speed rpm 2: ca.6000, Silo indication 2: no, FREE TEXT: Freiplatz für weiteren Motor,

Manufacturer: Homag, Type: Hubschwingen für schwere Teile, FREETEXT1: war in Homag Tisch verbaut, FREETEXT2: Menge 4 Stück/Länge ca1250 mm<CRLF>aushebehöhe ca.200 mm, FREETEXT3: inkl Verschraubung Halterrung an Profilschiene,

Manufacturer: Falconi Leistenspritzmaschine, Type: Profiplus, Year: 2007, Control: Programm, Work piece width min-max mm: 10-240, Min.-max. workpiece length in mm: 200, Min.-max. workpiece height in mm: 10-80, Working width mm: 300, work piece detection: yes, Conveyour system: Band/Rolle, Spraying stations: 5, Laquer circles: 1, Laquer system - airless: yes, Laquer recharging: no, Dry exhauster: yes, Feeding belt mm: 400, Feeding speed m/min: 10-60, Number of units: 5, Feeding speed continous adjustable: yes, Feeding speed continous adjustable: yes, Year :2007

Manufacturer: Josting, Type: Ersatzmesser Fuznierschere, FREETEXT1: Messer länge 2950 mm, FREETEXT2: Rückenhöhe 80 mm, FREETEXT3: Bohrabstand mitte 15, FREETEXT4: Bohrabstand 110,

Manufacturer: Heesemann, Type: FGA 6, Year: 1989, Monting of the machine: L, Sanding width mm: 1350, Sanding hight mm: 80, Number of sanding belts: 1, Rollers: no, Cross sanding unit: no, Shoe unit: yes, Shoe unit: yes, Elektronische Tastung mm: yes, Power belt 1 in kW: 11, Intermediate sanding of lacquer: yes, Constant table hight: yes, Segment sanding shoe: 40, Brushing unit: yes, Year :1989