mbo f 520 used for sale

Net bagging scale for valve bags, fully functional, calibrated until 2023, without dust coating Automatic scale (SWA) accuracy class X(1), general approval, weighing range 25 kg - 25 kg, graduation value 12.5 g 4 units available

Refer to code 1130 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Key data: 160 mm, 2 kW, 1770 m³/h

mobile chip extraction system AL-KO FMRG 1/160 Manufacturer Part Number: 4172370/2

Refer to code 1131 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Sliding table saw Altendorf Type F90 Machine No. 66-9-135 Sliding carriage length 2200 mm Cutting width 800 mm Motor power 5.5 kW Flat belt drive, 2 speeds Cutting width to the right of the saw blade 800 mm max. saw blade diameter without splitting wedge 500 mm Cutting height maximum 165 mm Maximum saw blade diameter with splitting wedge 400 mm Information on the cutting height for saw blade diameter Saw blade diameter 250 mm Cutting height 0 - 55 mm Saw blade diameter 300 mm Cutting height 0 - 80 mm Saw blade diameter 350 mm Cutting height 25 - 105 mm Saw blade diameter 400 mm Cutting height 50 - 130 mm Saw blade bore 30 mm Saw blade cannot be swivelled Extraction connection diameter 120 mm + 80 mm Packaging dimensions approx. 2200 mm x 1400 mm x H 1500 mm Weight approx. 855 kg

Refer to code 1133 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

POMINI-FARREL / POMINI Laboratory Tangential Mixer PL1,6 Refer to code 1144-1014 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

For sale is a used Schäfer & Flottmann tray erector with lateral insertion function for package inserts, package products such as e.g. Flower seed bags, etc., which are placed at the bottom of the tray. The tray is previously covered with an adhesive and can thus be fixed to the bottom of the tray. A vision system from Keyence uses the camera to check whether the products used have been positioned correctly. If not, the tray is ejected. In one of the following stations, products can either be inserted laterally or the tray is formed into an open tray. The Schäfer & Flottmann has run little and is in very good condition. There were 2 systems in stock and one of them has already been sold. There is a very extensive spare parts package worth about 150,000 € for the system

Refer to code 1176 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1177 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1182 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Heavy and precise manual grooving machine with built-in grooving line

Dough dividing and rounding machine Bun press Fortuna Automat Gr. 3+ with active shutdown Head cleaning to the back Partial head reworked with stainless steel knife NEW Dough insert up to 2400g depending on TA Dough Dividers 30 Pieces/Piece with rewind button E-system NEW DGUV V3 tested Connection 400V, 1.6 kW, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm Used machine overhauled Option: Stainless steel pedestal Wirkteller Neu Service Package Maintenance contract Instruction & Commissioning Delivery With us you will find one of the largest selection of bun presses!

Dough dividing and rounding machine Bun press Fortuna Automat Size 4 H with active shutdown Head cleaning with hand crank Parting head newly revised 30-piece with stainless steel knife NEW Dough insert 1200 to 3600 g, Unit weight from 40 to 120 g E-system NEW DGUV V3 tested with rewind button Connection 400V, 16A-CEE plug Approx. dimensions: 710 x 730 x 1500 mm WxDxH Used machine overhauled Option: Stainless steel pedestal New Acting Plate Maintenance contract Service Package Instruction & Commissioning Delivery Come to our large bakery equipment exhibition!

- Drill diameter: 3-10 mm (optional up to 22 mm) - Drilling depth: Max. 70 mm - Spindle distance: Adjustable between 45 mm and 540 mm - Hole spacing: Min. 3 mm, Max. 800 mm - Table size: 98 x 60 cm - Additional features: Drill length compensation, cooling/lubrication, speed regulation

x-travel: 1100 mm y-travel: 600 mm z-travel: 500 mm table surface area: 1300 x 600 mm spindle taper: SK 40 spindle turning speed - stepless: 10.000 U/min ATC: 40 Pos control: HEIDENHAIN, TNC 530 total power requirement: kW weight of the machine ca.: 8,8 t dimensions of machine L x W x H: 2,58 x 3,04 x 2,35 m Accessories: 2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm, various tool holders, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1500 mm y-travel: 800 mm z-travel: 700 mm table surface area: 1760 x 700 mm spindle taper: SK 40 spindle turning speed - stepless: 8000 U/min spindle drive: 15 kW feeds: 1 - 8000 mm/min rapid traverse X/Y/Z axis: 15 / 15 / 12 m/min table load: max. 2500 kg spindle throat: 760 mm ATC: 40 Pos control: HEIDENHAIN, TNC 530 total power requirement: kW weight of the machine ca.: 12,5 t dimensions of machine L x W x H: 4,23 x 2,98 x 2,74 m - with coolant through spindle Accessories: NC-dividing unit (=4th Axis) with tailstock, center height 250 mm, 2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm, various tool holders, chip conveyor, coolant - geometrical overhauled in 2022 - - new ball bearing spindle installed on Y-axis in NOV. 2022 - - the magnetic plates shown on the photo are not included - The data for this ad was created with ModulMWS - the software so ...

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm table surface area: 800 x 400 mm spindle taper: SK 40 control: HEIDENHAIN TNC 310 spindle turning speed range: 10 - 3150 U/min spindle drive: 5,5 kW feed - longitudinal/cross: 1 - 5000 mm/min feeds vertical: 0,5 - 2500 mm/min rapid traverse: 6 / 6 / 3 m/min total power requirement: 10 kVA weight of the machine ca.: 2,5 t dimensions of machine L x W x H: 2,16 x 1,70 x 2,0 m Accessories: solid table, vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3000 mm y-travel: 940 mm z-travel: 1000 mm table surface area: 3250 x 800 mm spindle taper: SK 50 spindle turning speed range: 40 - 1800 U/min feeds longditudinal/cross/vertical: 0 - 2250 mm/min rapid traverse: 6 m/min table load: 4500 kg control: HEIDENHAIN, TNC 355 total power requirement: kW weight of the machine ca.: 10,3 t dimensions of machine L x W x H: 4,50 x 2,69 x 2,71 m Accessories: vertical head swivelling in 2 planes with hydr. tool clamping, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1200 mm swing diameter: 1600 mm turning height: 1250 mm slide adjustment: 800 mm Control: Siemens type: 840 c power capacity: 56 kW : total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2040 mm plate thickness: 3 mm daylight upper clamping: 350 mm bending angle max.: 0-135 ° adjustment of lower and bend clamping: 80 mm control: Fastimatic M200 power requirement: 2,2/1,5 kW weight of the machine ca.: 2460 kg dimensions of the machine ca.: 3,2 x 2,8 x 2,1 m Condition: ready for operation: Condition: very good: CE signed: Video available on our website.: Electric 400 Volt: CNC-control with screen: Mot. back gauge: 1000 mm Foot switch: Motorized machine with motorized bending beam adjustment for setting the sheet thickness, screen control Fastimatic M200 (DELEM FM 200 B) for controlling the top cheek stroke, the bending angle and the back gauge with max. 30 working steps, emergency stop switch with magnetic holder, back gauge with ball screw spindles, CE mark. The bending performance refers to sheets of strength of 400 N / mm². Little used machine, ver ...

: 560 mm : 320 mm : 400 mm : 950x450 mm : 1050x320 mm : 25-3600 U/min : SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fiber laser cutting machine Type: TruLaser 5030 Fiber Manufacturer: Trumpf Year: 2012 Laser power: 3000 W The machine is also equipped with automation for loading and unloading material in automatic mode. LiftMaster Compact Regularly serviced by TRUMPF branded service Machine in good condition, under power Find more here - / Contact us at -

Pallet racking, as good as new 108 pitches Multiple available. Manufacturer: Jungheinrich Type: B Specifications: 10 stand frames, approx. 4,500 x 1,100 mm 36 supports, approx. 3,600 x K125 mm mm 72 locking pins Shelf load is 1,600 kg (with evenly distributed load). 2.773,11 € net plus 19 % VAT from stock 21698 Harsefeld. Subject to changes and errors. We are a professional provider – invoice with VAT indicated.

The scope of delivery includes: 01x Truss strut, new Manufacturer: Mecalux Material colour: sendzimir galvanised Overall length: approx. 1,218 mm Center-center hole: approx. 1,164 mm f. Frame profile width: 100 mm Ø drill hole: approx. 10 mm U-profile dimensions: 70 x 30 mm Material thickness: approx. 1.5 mm Weight: 1.78 kg | Pcs. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

diameter: 400 mm bore: 135 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Used 3-jaw chuck The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical Specifications & Performance Data The FINPAC SHM B2 is a second hand sleeve labeling solution engineered for high-output beverage production and industrial packaging environments. Optimized for PET bottles, it delivers stable application of shrink sleeves and consistent shrink quality via an electric tunnel, making it a strong fit for a used bottling line seeking reliable, repeatable labeling performance. Manufacturer / Model: FINPAC SHM B2 Year: 2007 Category: Labeling Machine (sleeve applicator with electric shrink tunnel) Nominal speed: up to 9,000 bottles/hour Container types: PET (primary configuration) Bottle formats set up: 0.06 L and 0.50 L Typical bottle range: diameter 55–87 mm; height 120–240 mm Sleeve film thickness: 45–50 µm Number of stations: 1 Labeling method: Sleeve application (method code 8) Label placement: Full-body sleeve capability (plac ...

Refer to code 1178 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

32000km, Diesel 2,0 l ECOBlue, Manual gearbox, 3 seater, 5 doors, white, TÜV/AU up to 3/26,...

Technical Specifications & Performance DataThe Robino & Galandrino Fenix 2 is a dedicated capsuling machine engineered for precise capsule application on bottles within a used bottling line context. Built with industrial packaging reliability in mind, this unit integrates smoothly into beverage production environments and second hand bottling equipment upgrades. Manufactured by Robino & Galandrino, it leverages the brand’s engineering for consistent, repeatable results in capsule application.Manufacturer: Robino & GalandrinoModel: Fenix 2Year: 2014Speed: 5000 BPH ( bottles per hour) Machine category: Capsuling machineSchema/code: FEX750Electrical supply: 400 V, 3-phaseFrequency: 50 HzNominal current: 6.5 ATypical application: Capsule application on bottles in beverage production linesAdvanced Automation & Control SystemsThe Fenix 2 supports straightforward integration with modern li ...

Key data: 1000 mm, 450 mm, 600 mm

Universal Milling Machine DUFOUR type F250 Travel X: 1000 mm Travel Y: 450 mm Travel Z: 600 mm Spindle SA 40 Table size: Length 1400 mm x Width 400 mm Horizontally + vertically swivel head Spindle speed: from 24 to 1500 RPM Scale 3 axes MITUTOYO Horizontally + Vertically spindle Rapid X - Y - Z Lubricant pump Centralized lubrication pump Voltage: 380 V Width: 2000 mm Depth: 2400 mm Total height: 2200 mm Weight: approx 3,5 T

Technical Specifications & Performance Data The Robopac Ecoplat FRD is a rotary table stretch-wrapping station designed for robust end-of-line industrial packaging. This second hand 2018 unit is suited to stabilizing pallet loads coming off a used bottling line, supporting beverage production environments and other FMCG applications. Manufacturer: Robopac Model: Ecoplat FRD Year: 2018 Machine type: Rotary table stretch wrapper Condition: In storage Installed power: 1.4 kW Approx. machine weight: 355 kg Operator documentation: Manuals available Safety: Safety features included Performance role: Pallet load stabilization downstream of filling, capping, labeling, and case packing Container streams handled: Palletized packs of PET, glass, and aluminum beverage containers Product applications: Water, juice, beer, wine, and related beverage categories Throughput context: Suited to low-to-mediu ...

Overview  This hotmelt labelling machine for precut paper labels was manufactured in 1993 by Italy PE LABELLERS. The machine is designed for labelling of PET bottles. Production stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It is available immediately. Technical data Capacity: approx. 7,200 bph Formats: 1.5 L / 2.0 L Application: PET Configuration: Hotmelt labelling machine for precut paper labels

Roller transport Finnrose 3410 mm - Manufacturer Finnrose - Working width 1,400 mm - Roll diameter 65 mm - Roll pitch 100 mm - All wheels with rubber surface - Feed infinitely variable via handwheel - Feed speed approx. 2 - 8 m/min - Length 3,410 mm - Volts, Hz 400 V / 50 HZ - Location, at the warehouse D-32825 Blomberg

Technical specification, FGR S1 FGR M1 FGR L1, FEATURE VALUE FEATURE VALUE FEATURE VALUE, POWER 15 KW POWER 30 KW POWER 45 KW, ROTOR DIAMETER 350 mm ROTOR DIAMETER 350 mm ROTOR DIAMETER 350 mm, ROTOR LENGTH 400 mm ROTOR LENGTH 800 mm ROTOR LENGTH 1200 mm, BLADE 7+2 BLADE 14+4 BLADE 21+6, LENGTH 800mm LENGTH 1200mm LENGTH 1600mm, WIDTH 1400mm WIDTH 1480mm WIDTH 1580mm, HEIGHT 2000mm HEIGHT 2000mm HEIGHT 2000mm, fine mills, Mizar Machines mills offer high performance in industrial waste processing and recycling processes. These mills are designed for efficient grinding and granulation of various materials. With their superior crushing capacity and fast processing times, they can effectively process even challenging materials such as metal cables, plastics and electronic waste. The use of durable materials and wear-resistant blades ensures long-lasting and reliable performance. By prioritiz ...

This 3-axis Stratasys Fortus 450mc was manufactured in 2018. It features a working area with an X-axis width of 406 mm, Y-axis depth of 355 mm, and Z-axis height of 406 mm. The machine supports a variety of materials including ABS-M30, Nylon 12, and ULTEM. If you are looking to get high-quality 3D printing capabilities, consider the Stratasys Fortus 450mc machine we have for sale. Contact us for further details.

Machine tool manufactured in 1999. This STAHLI FLP 700 features a copper plate with a diameter of 700 mm. If you are looking to get high-quality machining capabilities, consider the STAHLI FLP 700 machine we have for sale. Contact us for further details.

This 6-axis ABB Schweißroboter Flex Arc was manufactured in 2019. It features a robust IRB 1660ID-6/1.55 robot type and a positioner with a payload capacity of 250 kg. The machine operates at a power consumption of 22 kVA and includes advanced safety features such as a vertical light curtain and integrated safety PLC. If you are looking to get high-quality welding capabilities, consider the ABB Schweißroboter Flex Arc robot arm we have for sale. Contact us for further details.

Manufacturer:Fanuc Type of Machine : Robot Year of Manufacture: 2022 Technical Specifications - Controlled Axes: 6 - Max Load Capacity at Wrist: 7 kg (15.4 lb) - Reach: 911 mm (35.9 in) - Repeatability: 0.010 mm (0.0004 in) - Robot Weight: 27.0 kg (60 lb) Find more here - / Contact us at -

Unused, complete automatic filling system with heating tank and conveyor belt. manufacture Danish Candle Machinery. Intended for wax-based candle production, but can be used for many other types of filling work. Everything made to order in 2021 in Denmark. Supplied with instructions and EU declaration of conformity. Filling system for filling five units at a time • 1 x 6 kW / 3 x 400 v • Pump, pump bracket, hose • The nozzles are replaceable and come in sizes ø2, ø4 and ø6 mm Heating tank 2000 liters • Heating element: 1 x 9 kW / 3 x 400 v / 30 - 110 ° C • Dimensions: 220 x 120 x 134 cm • Inner and outer tank in stainless steel • Insulation cover in galvanized steel • Lid in aluminum Conveyor • Motor-driven and sensor-controlled • Dimensions: 5 x 0.5 m Find more here - /

System Installer: DSD Dillinger Stahlbau GmbH Technical Data: - F612 - 2 units each, diameter approx. 0.54m; length approx. 1.5m; volume 155l, built in 1990 - W613 - 1 unit each, diameter approx. 0.46m; length approx. 2.30m; volume approx. 280l, built in 1990 - B613 - 1 unit each, diameter approx. 2.30m; length approx. 2.62m; volume approx. 120l, built in 1990 - 612.3 and 4 - 2 glycol filters each, diameter approx. 0.4m; length approx. 1.6m; weight 0.3t; volume 100l Find more here - / Contact us at -

; Transport weight [kg]: 300