15707 offers

maximum number of results exceeded > 1000
please refine your search

Category: 707: catering machines
New in: used
Price: 350 €
Location: Land-de DE 13469 Berlin, Jean-Jaurès-Str. 21
Seller: Dipl.-Ing. O. Saad

Combined spout sink: A) 500x680x1100mm with sensor faucet, control for hot water 490Euro. (C) 500x650x1170mm, 400Euro. (D) 500x700x1000mm, 350Euro. The mismatch? We resolve our camp and have very many, cheap deals for devices from the fields of gastro, restaurant and canteen kitchens, just make a request.

Category: 209: other wood working machines
New in: 2008
Price: 2.825 EU€
Location: Land-pl PL
Seller: Kennedy Machines

Pneumatic table for whipping euro epal 80 x 120 pallets, allows for correct placement of nailed elements and precise nailing of nails in predetermined positions.

Category: 802: presses: sheetfed 2-color
New in: 1998
Price: request quote
Location: Land-ch CH St. Gallen
Seller: MJS-LINE GmbH

Counter (m):71 // Print speed:15000 Bows / h Number of Colors : 2 Format (cm): Max.: 37 x 52 / Min.: 10.5 x 14.5 Equipment / further information: Dampening: Alcolor dampening and cooling Technotrans

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Drying oven (1x), Make Nabertherm, Type W-1000/H, No 154942, New 1999, Max. temperature 1340 Degr. C., Number of compartments: 1, Capacity 1000 Ltr, Internal width 800mm, Internal depth 1600mm, Internal height 850mm, Electric heating, Electric capacity 75 KW, 400 Volt, Number of doors: 1, With switchgear, Floorspace 2,4x1,6 M, Total height 1,9 M, Weight 2850 KGDRYING OVENSDRYERS > DRYING OVENS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for many more machines!

Category: 106: presses
New in: 1993
Price: request quote
Location: Land-De Germany, 50937 Köln
Seller: Gewerbe Dmitri Perfilov

Nominal capacity, metric tons 2500 Slide stroke, mm 350 Number of continuous stroke per min 70 Number of single strokes per min 14 Die height, mm 890 Adjustment, mm 10 Bed dimensions, mm left to right 1200 front to back 1400 Slide dimensions, mm left to right 1090 front to back 1150 Main drive electrical motor power, kW 90 Press overall dimensions, mm left to right 5585 front to back 3750 height above floor level 6850

Category: 1005: cranes
New in: 2008
Price: 239.000 €
Location: Land-nl NL Groenlo
Seller: Pfeifer Heavy Machinery B.V.

; Mileage [km]: 192875; Gross weight [kg]: 38900; Registration Number: W093830008EL05024; Lift height[mm]: 3800; Maximum lift capacity [kg]: 50000

Category: 701: basic foodstuffs and animal feeds machines
New in: 1998
Price: request quote
Location: Land-uk UK Wolvey
Seller: Machinery World Ltd

This is a Used 5,000 LPH APV Gaulin Type 37-3P Homogeniser which is a poppet valve machine & has a max. working pressure of 2900 psi (200 bar). Features •Manufacturer: APV •Model: Gaulin 37-3, P •Serial Number: 98L35199 •Function: Homogeniser •Capacity: 5,000 litres/per hour •Year of manufacture: 1998 •Max. working pressure: 200 bar (2900 PSI) •Valve design: Poppet •Number of stages: 2-Stage •Total installed power: 37 kW (1465 r/min) •Electrics: 380V / 3Phase / 50Hz •Finish: Stainless steel covers •Instruction manual included Dimensions •Depth: 170 cms •Width: 140 cms •Height: 170 cms •Weight: 1500 kgs Count ...

Category: 1005: cranes
New in: 2013
Price: request quote
Location: Land-nl NL Groenlo
Seller: Pfeifer Heavy Machinery B.V.

; Gross weight [kg]: 74380; Registration Number: WLFA60AZZDEZZ0012; Rear tyres remaining: 80; Front tyres remaining: 80; Lift height[mm]: 7000; Maximum lift capacity [kg]: 350000

Category: 701: basic foodstuffs and animal feeds machines
New in: 2008
Price: request quote
Location: Land-uk UK Wolvey
Seller: Machinery World Ltd

The SE40 CX is a self-cleaning centrifugal separator for cream clarification. Features •Manufacturer: Seital (SPX) •Model: SE40 CX •Function: Cream concentrator •Year of manufacture: 2008 •Serial number: M01432 •Hydraulic capacity: 18.000 litres / hour •Cream concentration capacity: 5.000 litres / hour •Solids chamber capacity: 8 litre •Maximum product density: 1,1 kg/dm3 •Maximum product sludge: 1,35 kg/dm3 •Maximum product temperature: 95 degC •Minimum product temperature: 3 degC •Total installed power: 18.5 kW (1.450 r/min) •Voltage: 400 V / 3 Phase / 50 Hz •Bowl speed: 6.500 rpm •Complete with tools, base plate and control pane ...

Category: 1005: cranes
New in: 2007
Price: 18.900 €
Location: Land-nl NL Groenlo
Seller: Pfeifer Heavy Machinery B.V.

; Gross weight [kg]: 2300; Registration Number: UJ1DL22NX7DK13277; Rear tyres remaining: 60; Front tyres remaining: 60; Maximum lift capacity [kg]: 200

Category: 702: breadmaking and confectionery machines
New in: used
Price: 2.000 €
Location: Land-de DE 13469 Berlin, Jean-Jaurès-Str. 21
Seller: Dipl.-Ing. O. Saad

Juno; Air-O-Steam type 5714-3, combi steamer / convection / Combi-steamer / combi steamer with steam and hot air with 2 embroidery trolleys à 20 shelves GN1 / 1 cross recess, 535x450, GN-insert transversely A) is complete and functional B) inner disc and a valve is missing. External dimensions: 890x980x1800 Internal dimensions: 580x500x1340 elec. Voltage: 380V elec. Power: 34kW. Not the right one? We dissolve our warehouse and have very many, cheap offers for equipment in the areas of gastro, restaurant and commercial kitchens, just make an inquiry.

Category: 1005: cranes
New in: 2004
Price: 12.900 €
Location: Land-nl NL Groenlo
Seller: Pfeifer Heavy Machinery B.V.

; Gross weight [kg]: 2300; Registration Number: UJ1DL22NX4DK12449; Rear tyres remaining: 50; Front tyres remaining: 50; Maximum lift capacity [kg]: 200

Category: 1300: other machines and plants
New in: used
Price: 3.200 €
Location: Land-it IT Brescia
Seller: Mercury Auctions s.r.l.

Machinery workshop and office furniture For sale exclusively next 06th February 2019 at 10:00 o'clock in Cazzago San Martino, Brescia Visit our website or contact us at 030 7751645 to learn more about it and see the lot! Workshop machinery: Disc saw (saw) Palmer mod. Brown 300 MRM matr. 026237 Three workbenches to assemble cylinders Welding area with two welding machines (a TIG CEA Tigtronic 505 and a knitted REHM), wall-mounted pivoting Cap piece, exhaust fan support, a bench with vise, a double wheel Main office furniture: Corner desk, dressers, cabinets, shelves, chairs, various printer and copier. Office: metal drawer units with doors in different materials, archive scanning do ...

Category: 1010: loaders
New in: 2003
Price: 11.900 €
Location: Land-nl NL Groenlo
Seller: Pfeifer Heavy Machinery B.V.

; Gross weight [kg]: 2300; Registration Number: UJ1DL22NX3DK12231; Rear tyres remaining: 60; Front tyres remaining: 60; Maximum lift capacity [kg]: 200

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-de DE 27755 Delmenhorst
Seller: Inox Behälter GmbH

50 litre stainless steel tank Used 1.4301 stainless steel Standing Last purpose: food Design: Single-walled Number the fixations: booth frame Floor: Arched Topsoil: quick release Operating pressure according to name plate: atmospheric

Category: 102: lathes
New in: 2005
Price: request quote
Location: 89312 Günzburg
Seller: Ralf Schmeißer Werkzeugmaschinen

turning diameter: 240 mm turning length: 300 mm control: SIEMENS 840 greates pass round over bed: 450 mm x-travel: 190 mm z-travel: 635 mm U-axis: 150 mm w-axis: 540 mm spindle bore: 53 mm bar material dia.: 42 mm main spindle speeds:: 50 - 5000 rapid travel - longitudinal/face: 20 / 10 m/min main drive motor: 18,5 kW total power requirement: 48 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: m Double spindle turning center with C axis for main and counterspindle. Y-axis bar feeder IRCO Profimat DS Type 42.8 Lmax = 3000 mm Workspace: - Circumference diameter max .: 560 mm - Travel X: 205 mm - Travel distance Z: 525 mm - Turning diameter max: 240 mm Main drive version: - Ra ...

Category: 301: injection moulding machines
New in: 2002
Price: request quote
Location: Land-de DE
Seller: GloCon TST GmbH

Preform Injection Molding Machine sized for preform molding tools of up to 72 cavities @ 45 g unit weight. Equipped with large injection unit (120-mm-extruder, 110-mm-shooting pot for max.shotweight of 3.344 g PET). Complete process package includes: MOTAN-resin dryer and EISBAER-dehumidifyer.Maintained at top level availability (maintenance log) up to last shot before decommissioning in November. Equipment set up for shipment in GloCon. 32, 48 and 72-cav.-molds available.

Category: 102: lathes
New in: 2014
Price: request quote
Location: Weltweit
Seller: Stiens Werkzeugmaschinenhandelsgesellschaft mbH

turning diameter: max. 200 mm turning length: max. ca. 390 mm control: C 200 4D sl (840 D sl) Main spindle:: Max. rpm: 5.000 min/-1 power capacity - main spindel: 20 / 24 kW max. Torque: 135 / 190 Nm spindle diameter in front bearing: 110 mm spindle bore: 85 mm spindle passage: 65 mm usable bar diameter: 65 mm spindle nose: D 140 ISO 702/1 C-Axis: 0,01 ° max. chucking diameter: 175 mm Subspindle:: Max. rpm: 5.000 min/-1 power capacity - Sub spindle: 20 / 24 kW max. Torque: 135 / 190 Nm spindle diameter in front bearing: 110 mm spindle bore: 85 mm spindle passage: 65 mm usable bar diameter: 65 mm spindle nose: D 140 ISO 702/1 C-Axis: 0,01 ° max. chucking diameter: 175 mm Milling Spindle:: ...

Category: 303: blow moulding machines
New in: 2002
Price: request quote
Location: Land-de DE
Seller: GloCon TST GmbH

Preform Injection Molding Machine sized for preform molding tools of up to 72 cavities @ 45 g unit weight. Equipped with large injection unit (120-mm-extruder, 110-mm-shooting pot for max.shotweight of 3.344 g PET). Complete process package includes: MOTAN-resin dryer and EISBAER-dehumidifyer.Maintained at top level availability (maintenance log) up to last shot before decommissioning in November. Equipment set up for shipment in GloCon. 32, 48 and 72-cav.-molds available.

Category: 102: lathes
New in: 2014
Price: request quote
Location: Süd-Europa
Seller: Stiens Werkzeugmaschinenhandelsgesellschaft mbH

turning diameter: max. 500 mm turning length: 1.250 mm control: 840D sl ShopTurn Siemens swing diameter: 500 mm distance between spindles: 1.450 mm standard turning dia.: 390 mm Main spindle:: turning speed range - main spindle: max. 5.000 min/-1 power capacity - main spindel: 25 / 34 kW max. Torque: 170 Nm usable bar diameter: 65 mm C-Axis: 360 ° chucking diameter: max. 250 mm tool magazin:: number of toolpositions: 24 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 120 mm max. tool weight: 8,0 kg max. tool length: 300 mm Milling Spindle:: Speed Milling Spindle: max. 12.000 min/-1 power capacity - milling spindle: 22 kW max. Torque: 100 Nm tool taper: HSK-63A DIN69893 B- ...

Category: 502: presses
New in: 1997
Price: request quote
Location: Land-de DE 28816 Stuhr/Bremen - Germany, Gutenbergstr. 22
Seller: RDA Recycling Machinery GmbH

Presona LP 40 OH2, constructed 1997, motor 30 kW Technical specifications Manufacturer Presona Sweden Type LP 40 OH2 Year of construction 1997 Feed opening 1000 x 690 mm (LxW) Drive power 30 kW Press power 40 t Tying system 4-fold, horizontal Max. volume capacity 250 m³/h Press capacity at bulk weight of 25-30 kg/cbm Approx. 6-7,5 t/h bulk weight of 30-40 kg/cbm Approx. 7,5-10 t/ Press chamber volume 0,77 cbm Bale size 750 x 850 mm (WxH), length varible Oil tank volume 600 litres Transport dimensions 6650 x 1800 x 2650 mm (LxWxH) Machine weight Approx. 8900 kg

Category: 110: accessories for machine tools
New in: used
Price: request quote
Location: Willich-Neersen
Seller: Markus Hirsch GmbH

floor-plate length: 1200 mm floor-plate width: 840 mm floor-plate height: 150 mm T-slot - distance: 100 mm T-slot - width: 38/22 mm number of T-slots: total power requirement: kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: m

Category: 502: presses
New in: 2010
Price: request quote
Location: Land-de DE 28816 Stuhr/Bremen - Germany, Gutenbergstr. 22
Seller: RDA Recycling Machinery GmbH

Presto, type HPK 50 BSK, year of construction 2010, drive power 22 kW, only 7270 operating hours Technical specifications Manufacturer Presto Type HPK 50 BSK Year of construction 2010 Press power 50 t Specific press capacity 65 N/cm² Drive power 22 kW Power input 80 A Hours of operation 7270 Channel cross section 1100 x 700 mm Feed channel dimensions 1050 x 1250 mm Filling volume 0,96 m³ Throughput capacity on idle speed 157 m³/h Cycle time 22 sec. Average throughput rates: Density of 35 kg/m³ 4,4 t/h Density of 60 kg/m³ 6,3 t/h Density of 100 kg/m³ 9,9 t/h Bale weight up to 500 kg, depending on material Tying system 4-fold, fully automated Machine dimensions with ...

Category: 103: milling machines
New in: 1984
Price: request quote
Location: ab Lagerstandort Non EU
Seller: Kemmerich Werkzeugmaschinen GmbH

max. wheel diameter: 238 (260) mm tooth width: 60 mm max. module: 10 min. module: 1,5 min. workpiece diameter: 12 mm min/max. pitch cone angle: 0 - 85 ° cone distance: 130 mm no. of teeth: 6- 99 blade cutter head diameter: 600 mm number of blades: 2 x 36 total power requirement: ca 18 kW weight of the machine ca.: 6,6 t dimensions of the machine ca.: 2,8 x 2,4 x 1,8 m 2 Machines available in a package year of make 1984 & 1986 Machines are both dismantled and stored

Category: 201: saws
New in: 1989
Price: 3.500 €
Location: Land-de DE 58730 Fröndenberg/Ruhr, In der Liethe 1
Seller: Fritz Ernst Maschinenhandel e K

Used saws Internal number: m2658 Manufacturer Altendorf Type F 45 Machine number 77-1-89 Year of construction 1989 Speed 2,870 RPM. Carriage length 3,20 m Blade swivel up to 45 ° Weight 900 kg Engine is reason been overtaken. With test sheet Item location: 58730 Fröndenberg/Ruhr The machine can be visited like to see power and tried out. A forklift/crane for loading is available. There is the way learned to examine suburb for sale articles. Specific questions should be clarified in advance. The information, technical data, dimensions, year, condition are non-binding and were shown to the best of my knowledge and belief. Errors are reserved. The warranty / guarante ...

Category: 101: boring mills and machining centers
New in: 2007
Price: request quote
Location: ab Werksstandort,unter Strom
Seller: Kemmerich Werkzeugmaschinen GmbH

x-travel: 1150 mm y-travel: 710 mm z-travel: 710 mm Control: Heidenhain TNC 530 Main spindle:: Max. rpm: 18.000 min/-1 power capacity - main spindel: 28 kW tool taper: SK 40 work table:: table surface area: 1.500 x 800 mm max. table load: 1.100 kg Tool-Presetter:: number of toolpositions: 32 pos. tool taper: SK 40 change-time chip to chip: 11,0 sec feeds:: rapid traverse ( X / Y / Z ): 30 m/min feed speeds: max. 30.000 mm/min total power requirement: 40 kW weight of the machine ca.: 10,0 t dimensions of the machine ca.: 6,0 x 5,0 x 2,7 m 5-Axis Machine equipped with: - CNC Control Heidenhain TNC 530 - universal Milling Head (B-Axis +30/-130°) - NC- rotary Table dia 800mm (C-Axis) - ATC  ...

Category: 2000: spare parts
New in: used
Price: request quote
Location: Land-de DE 24941 Flensburg, Wieselhof 29
Seller: JODAU - Kommunaltechnik

New parts to Caterpillar 3003 / Perkins 103-10 diesel engine - 3-cylinder, 954 cc 1 set crankshaft bearing bearing Kit CAT 153-5520 1 set crankshaft bearing bearing Kit CAT 153-5525 1 gasket set gasket Kit CAT 153-7638 - incomplete, content see photo 1 piston ring set ring KIT piston 153 5542 1 radiator fan sheet steel CAT 149 5463 00 also available: Diesel engines 1-6 cyl., various products: Deutz, Daedong, Farymann, Hatz, Iseki, Isuzu, Komatsu, Kubota, Lombardini, Perkins, Shibaura, Ruggerini, Yanmar etc. Capacity of 4,5-100 kw, used partly as new. Gasoline engines: 1-2 cylinder 3-15 kw B & S, Honda, Kohler, Robin, dsey Wisconsin. Various cooler, starter, alternators, and m ...

Category: 107: sheet metal working
New in: 2000
Price: request quote
Location: ab Standort
Seller: Frech GmbH

material width: 1250 mm material thickness: 20,00 mm no. of straightening rolls: 19 sheet thickness - min.: 0,80 mm diam. of the rolls ca.: 80 mm speed: 2 - 20 m/min back-up rolls: 147 Stk. / pieces run-in height: 1000 mm Number of working hours: 18279 h total power requirement: 81 kW weight of the machine ca.: 38 t dimensions of the machine ca.: m Hydraulic leveller for parts with sheet thickness from 0,80 - 20,00 mm Dimensions: Machine about 3,60 x 2,90 x 2,20 m Switch cabinet: approx. 1,00 x 0,40 x 2,00 m Hydraulics: about 2,40 x 1,30 x 2,20 m

Category: 601: spinning, twisting, winding, reeling, spooling machines
New in: 1993
Price: request quote
Location: Land-uk UK Bradford,
Seller: Petros Textiles (1969) LTD

NSC Schlumberger preparation line model GC.14, composed of: First passage autoleveller,serial number 28560, year 1993,8 end can creel , automatic can change, delivery 1 sliver in 1 can dia. 1000 x 1200 mm . Second passage ,double coiler ,serial number 28462, year 1993, 14 end can creel, auto can change, automatic can change, delivery 2 sliver in 2 can dia 700x 1200 mm . Third passage ,bi coiler ,serial number 28823, year 1994 , 16 end can creel, automatic can change, delivery 4 slivers in 2 cans dia. 500 x 1000 mm .

Category: 212: peripheral equipment (e.g. heating, conveying, drying)
New in: used
Price: request quote
Location: Land-es ES Spain, 42005 Soria
Seller: Surplex GmbH

Weight approx.: 100 kg Dimensions (l x w x h) approx.: 3150 x 700 x 2750 mm Description: Serial number 057697, With 4 chip collection bags, Bags diameter 550 mm, With 4 filters, Filter diameter 550 mm, Input pipe diameter 250 mm, Motor 4 kw

Category: 1518: other lifts or indoor vehicles
New in: used
Price: 249 €
Location: Land-de DE 57080 Siegen, Eiserntalstr. 235
Seller: MPS Frank Müller

A used 2-way hydraulic control of the manufacturer of Vickers. For example: forklift, tractor, Unimog, truck, excavator, construction machinery, crane ect. Type number: 02324636 11 MD41 P25DT 325770 Mass total approx.: Hxwxl 160 mm x 240 mm x 270 mm This control block was stored at a forklift trucks and construction equipment dealer as a functioning spare parts and comes from a "battle vehicle". Contact person Mr. Mueller see also our over 200 more deals at. (Changes and errors in the technical data, information and prices and subject to prior sale!)

Category: 204: grinding machines
New in: used
Price: request quote
Location: Land-es ES Spain, 42005 Soria
Seller: Surplex GmbH

Weight approx.: 350 kg Dimensions (l x w x h) approx.: 1100 x 1100 x 1400 mm Description: Serial number 1622, Tilting Spindle, Worktable dimensions: 890 x 350 mm, Worktable height 840 mm, For more details see the photos

Category: 301: injection moulding machines
New in: used
Price: request quote
Location: Land-de DE 52070 Aachen, Jülicher Str. 336
Seller: EuropNet GmbH

Machine specification Year: 1998 Control unit: UNILOG 4000 B Injection Unit: .../315 CDC Screw diameter: 35 mm Injection pressure: 2057 bar Injection volume: 154 ccm Shot capacity: 140 g Clamping Unit: BA 1000/... Clamping force: 100 t Platen size: 640 x 640 mm Distance between tie bars: 420 x 420 mm Mould height: 250 mm Opening storke: 475 mm Max.Daylight: 725 mm Ejector stroke: 150 mm General information: Delivery time: Off hand Machine dimensions(m) LxWxH: 4,4 x 1,3 x 2,0 m Weight: 4.600 kg Equipment: - Serial number: C100906820989

Category: 203: planing machines
New in: 2000
Price: request quote
Location: Land-es ES Spain, 15528 Fene
Seller: Surplex GmbH

Weight approx.: 600 kg Dimensions (l x w x h) approx.: 3010 x 1400 x 1150 mm Description: Serial number 1437, Working width 500 mm, Table length 3010 mm, Entrance table length 1650 mm, Motor 4.00 kw, Maximum tool diameter 120 mm, Spindle with 4 knives, Tilting guide

Category: 819: presses: accessories and spare parts
New in: 2008
Price: request quote
Location: Land-ch CH 9240 Uzwil, Sternenstrasse 4
Seller: MJS-LINE GmbH

M. No.: C0851000161 Equipment / Additional information: Ultimate pressure: 150 hPa(mbar)

Category: 203: planing machines
New in: used
Price: request quote
Location: Land-es ES Spain, 08570 Torello Barcelona
Seller: Surplex GmbH

Weight approx.: 750 kg Dimensions (l x w x h) approx.: 1900x1200x1280 mm Description: For further details see photos

Category: 101: boring mills and machining centers
New in: 1997
Price: request quote
Location: Land-nl NL 4761 Zevenbergen, Campagneweg 10
Seller: Mamach Machinehandel BV

CNC Control Mazatrol M-Plus. Table size 1200 x 550 mm. Movement X-Axis 1020 mm. Movement Y-Axis 510 mm. Movement Z-Axis 460 mm. Number of tools in magazine 21 pieces. Maximum spindle speed 12.000 min. Tool taper DIN 69871A.

Category: 301: injection moulding machines
New in: 1993
Price: used machinery auction RESALE 2.500 €
Location: Land-at AT Austria, 3381 Golling
Seller: Surplex GmbH

Weight approx.: 3600 kg Dimensions (l x w x h) approx.: 3810x1300x2000 mm Description: ENGEL ES 200/50 HL-ST Injection Moulding Machine - type: ES 200/50 HL-ST - serail number: 24347 - international size designation: 200/50 HL - manufacturing year: 1993 - connected load: 22 kW - control voltage: 24V/220V - rated current: 41 A - electric diagram: 460376027054093

Category: 101: boring mills and machining centers
New in: 2003
Price: 19.500 €
Location: Land-fr FR 67500 HAGUENAU, 20 RUE AMPERE
Seller: SOCIETE FIMOTEC

Engine details Stock number 1105-02536 machine type machining center - vertical make CHIRON type FZ 08 W built in 2003 control type CNC storage France country of origin Germany delivery immediately cargo base site, free load technical details x way 300 mm y-way 250 mm z-way 250 mm table size 550 x 300 mm spindle retainer HSK-A 32 speed range 20-15000 rpm speed - longitudinal/transverse/vertical 40 / 40 / 60 m / min distance spindle/table 170-420 mm number of tool magazine stations 12 Werkzeugdurchme water to 63 mm tool length of Max 160 mm tool weight of 0.7 kg total power consumption of 3.7 kW additional information Control siemens 840 d Table 1 x 180 ° SPINDLE 15000 RPM

Category: 301: injection moulding machines
New in: 1995
Price: used machinery auction RESALE 5.900 €
Location: Land-at AT Austria, 3381 Golling
Seller: Surplex GmbH

Weight approx.: 9000 kg Dimensions (l x w x h) approx.: 5300 x 1600 x 2300 mm Description: ENGEL ES 650/125 HL Injection Moulding Machine - type: ES 650/125 HL - international size designation: 650/125 - serial number: 27380 - clamping force: 1250 kN - metering path: 200 mm - screw speed: 5 - 290 r/mm - nozzle stroke: 350 mm - nozzle contact force: 67 kN - number of nozzles including heating zones: 5 - opening path: 600 mm - ejector force: 61 kN - ejection stroke: 130 mm - max. plate distance: 850 mm - min. mould installation height: 250 mm - plate: 740 x 480 mm - pump drive capacity: 22 kW - oil main tank: 350 l - net weight: 9000 kg

Category: 1707: other computer and office equipment
New in: used
Price: request quote
Location: Land-de DE
Seller: Hascon

Wir verkaufen (please see information in English further down): 80 x IBM 3592-E07 TS3500 library tape drives Systems are available in January. Mehr Information auf Anfrage. Wir freuen uns ueber Anfragen aus Deutschland und international. Wir haben viele weitere refurbished/gebrauchte Hardware aus den Bereichen, der hier genannten Systeme sowie aus Bereichen weiterer Systeme dieser Hersteller zur Verfügung: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco,Cabletron, Enterasys, Extreme Networks,Huawei, Marconi, Nortel, Qlogic, Avaya Wir verfügen außerdem zu jeder Zeit über große ...

Category: 103: milling machines
New in: used
Price: used machinery auction RESALE 1.170 €
Location: Land-it IT Italy, 25011 Zona Industriale di Calcinato
Seller: Surplex GmbH

Weight approx.: 2500 kg Dimensions (l x w x h) approx.: 1900 x 2200 x 2300 mm Description: With digital readout brand BAUSCH & LOMB mod. AKURIGHT 2 and digital readout with 3 axis. Tabletop size 1400 x 325 mm.

Category: 1707: other computer and office equipment
New in: used
Price: request quote
Location: Land-de DE
Seller: Hascon

Wir verkaufen (please see information in English further down): 1x HP P6350 EVA FC SFF Combo Field Kit - 1x 2.5" Disk Enclosure - 48x 900GB 2.5" 10k SAS HDDs Mehr Information auf Anfrage. Wir freuen uns ueber Anfragen aus Deutschland und international. Wir haben viele weitere refurbished/gebrauchte Hardware aus den Bereichen, der hier genannten Systeme sowie aus Bereichen weiterer Systeme dieser Hersteller zur Verfügung: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco,Cabletron, Enterasys, Extreme Networks,Huawei, Marconi, Nortel, Qlogic, Avaya Wir verfügen außerdem zu jeder  ...

Category: 1900: general inventory
New in: used
Price: used machinery auction RESALE 370 €
Location: Land-it IT Italy, 25011 Zona Industriale di Calcinato
Seller: Surplex GmbH

Weight approx.: 250 kg Dimensions (l x w x h) approx.: 900 x 600 x 1500 mm Description: Serial number 39. Grinder Ø 100 mm. See photo

Category: 1707: other computer and office equipment
New in: used
Price: request quote
Location: Land-de DE
Seller: Hascon

Wir verkaufen (please see information in English further down): EMC Unity 300 Storage 50 x 200GB SSD/200GB Fast Cache/600GB 15K SAS Disks Mehr Information auf Anfrage. Wir freuen uns ueber Anfragen aus Deutschland und international. Wir haben viele weitere refurbished/gebrauchte Hardware aus den Bereichen, der hier genannten Systeme sowie aus Bereichen weiterer Systeme dieser Hersteller zur Verfügung: ORACLE, SUN, IBM, NETAPP, QUANTUM, DELL, STK, HPE, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco,Cabletron, Enterasys, Extreme Networks,Huawei, Marconi, Nortel, Qlogic, Avaya Wir verfügen außerdem zu jeder Zeit über große Menge ...

Category: 201: saws
New in: 2002
Price: used machinery auction RESALE 270 €
Location: Land-it IT Italy, 25011 Zona Industriale di Calcinato
Seller: Surplex GmbH

Weight approx.: 80 kg Dimensions (l x w x h) approx.: 820 x 500 x 1100 mm Description: Serial number 090028072. Band width 120 mm.

Category: 1401: shelves
New in: 2016
Price: 16.500 €
Location: Land-de DE Schramberg
Seller: P.+ K. Lager- und Betriebseinrichtungen GmbH & Co. KG

SYSTEM DESCRIPTION: "EuroTower" sheet warehouse system, built in the year 2016 contains five trolley are consumed with the "Euro Flat" steel pallets by forklift at the bottom. Then these stock levels as a drawer can be pulled out to single sheet by crane and a vacuum device to remove. The top height is 1,600 mm. The pallets are used at front by forklift. Also the manual excerpt front via swivel track walls. The total depth with open rail doors is 3,650 mm. In the closed condition, the total depth is 2.150 mm. The head support of the drawer block is used as additional storage space for a euro flat. Above it are 13 collar bracket storage levels for storing addition ...

Category: 409: other packaging machinery
New in: 1995
Price: request quote
Location: Land-es ES Spain, 42005 Soria
Seller: Surplex GmbH

Weight approx.: 70 kg Dimensions (l x w x h) approx.: 900 x 700 x 720 mm Description: Serial number 9507, 220 V, It uses polypropylene strap width up to 13 mm, Max. support width for package approx. 700 mm, Portable with wheels

Category: 1014: formworks
New in: used
Price: 14 €
Location: Land-at AT 5202 Neumarkt am Wallersee
Seller: Berger International

Safety railing clamp for screwing Safety on every structure These tried-and-tested systems give your site crew optimum protection and make a significant contribution to a smooth workflow. When the crew are properly protected, they work safely, which also means more rapidly and thus more efficiently – for your success. Doka handrail posts provide comprehensive safety • against fall hazards • on the structure and the formwork • thanks to their high quality (hot-dip galvanised) • conform to EN 13374 Class A Convenient and easy to mount Multi-functional as they can be used in many different situations ? maximum safety with easy assembly ? no squared timber waste

Category: 101: boring mills and machining centers
New in: 2002
Price: used machinery auction RESALE 15.900 €
Location: Land-ro RO Romania, 117156 Budeasa Mare, Arges
Seller: Surplex GmbH

Weight approx.: 13500 kg x-travel: 1000 mm y-travel: 500 mm z-travel: 600 mm control: CNC FANUC 21 iM Dimensions (l x w x h) approx.: 9000 x 2550 x 2900 mm toolchanger positions: 30 taper: ISO 40 turning speed range: 10000 rpm rapid traverse: 30 m/1` m/min table surface area l x w : 900 x 450 mm total power requirement: 22 kW Description: RMT KOMPAKT KP.10 P Vertical Machining Center - control unit: CNC FANUC 21 i - M - serial number: KP 1010 - manufacturing year: 2002 - X-axis: 1000 mm - Y-axis: 500 mm - Z-axis: 600 mm - maximum distance between spindle and worktable: 700 mm - surface of the worktable: 900 mm x 450 mm - cooling system: SACEMI TYPE IMM80B- P530 - optical messuring system: ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)