mb bäuerle used for sale

Ser.No.: 980633009 Infeed width: max. 45 cm min. 12 cm Infeed length: max. 33 cm min. 10 cm Stepless speed controller

Gardner Denver V-VC 75 Vacuum Pump Oil-flooded rotary vane vacuum pumps with IE2 motors Easy maintenance. Final partial pressure 0.1 mbar Suitable for industrial applications Flange motor, double-sided rotor bearing, oil/air cooler. Fine screen filter, suction check valve, gas ballast valve, protective cover and oil separator mobile use equipped with Siemens Simatic Display Specifications: Elmo Rietschle Gardner Denver Product Oil-lubricated rotary vane vacuum pump V-Series V-VC 75 Operating hours approx. 6684 Power 2.2 kW 1,745 rpm Pump capacity 70/84 m³/h Pressure 0.5 mbar Item condition: used

Gardner Denver V-VC 75 Vacuum Pump Oil-flooded rotary vane vacuum pumps with IE2 motors Easy maintenance. Final partial pressure 0.1 mbar Suitable for industrial applications Flange motor, double-sided rotor bearing, oil/air cooler. Fine screen filter, suction check valve, gas ballast valve, protective cover and oil separator mobile use equipped with Siemens Simatic Display Specifications: Elmo Rietschle Gardner Denver Product Oil-lubricated rotary vane vacuum pump V-Series V-VC 75 Operating hours approx. 883 Power 2.2 kW 1,745 rpm Pump capacity 70/84 m³/h Pressure 0.5 mbar Item condition: used

Used double chamber vacuum packaging machine Multivac AG800 has two chambers which ensure greater efficiency and is used in every industry where vacuum packaging of products is required. The machine is equipped with a high-performance Busch vacuum pump with a capacity of 100m3 / h and four sealing bars with a length of 650mm. The internal dimensions of the packing chamber are: 650 mm x 800 mm x 220 mm high. Busch vacuum pump: 100m3. Final pressure: 0.5 mbar Vacuum system: according to the sensor External dimensions of the machine: 1560 mm x 1100 mm x 1150 mm. Dimensions of sealing bar: 650 mm x 4. Weight: 275 kg.

travel -x axis: 140 mm travel -z axis: 710 mm control: Siemens C 200-4 main spindle speeds: 5.000 U/min bore diameter: 65 mm numbers of positions in the tool changer: 24 (2x12) CNC Turning- and Milling Center | INDEX - G300 + 2 turret + tailstock + bar feeder: Index MBL 65 Scope of delivery: - tool holder fixed The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: G 300 | G-300 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Nilfisk T30S, item number 4030600083 3.0 KW, 400 V, 50 Hz, 2840 rpm, 3 phases, 6.6 A, cos phi 0.90, Iso F, S1, IP55 Weight 103 kg, container volume 100 liters Vacuum -220 mbar, 130 m³/h Overpressure 278 mbar, 120 m³/h Year of construction 2011

Used Meyn breader model MB600 is a device used to coat products evenly with various type of bread crumbs. Device is suitable for products such as chicken nuggets, chicken breasts, chicken drumsticks, seafood, fish fillets, fish fingers, burgers, onion rings, mushrooms etc. MB600 is equipped with coating circulation system and a fan for removing excess coating. -Belt width: 600mm -Mobile construction -Adjustable speed -Equipped with vibration device -All stainless steel Dimensions: 3100 x 1300 x H2100mm

CATERPILLAR/ MWM type TCG 2020 V12 -> 0.999 MWe. The engine and generator are fully operational. Engine mileage - approximately 33000h. Year of manufacture 2015; fuel: natural gas / biogas Generator: Manufacturer MARELLI MOTORI SP. A type MJB 500 MB4; CODE MJB5042K33380; No. MC 16586; year of manufacture 2015. Control cabinet complete with panel. Engine taken out of service with the customer in August 2022 due to the purchase of a new one. The engine has no visible signs of leakage. If interested, I can send a real -film on WhatsAp.

Available in stock 1 x Used Bryan Donkin RMG Gas Pressure Regulator RMG-BD226 (FIG 226 ZSO-ECL). Designed primarily for control of fuel feeds to industrial and commercial burners, heater units, boilers and other items of equipment where an accurate, safe and reliable controlled pressure is required. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 2 x Solenoid Valves DN65 PN16 1 x Gas Filter DN65 PN16 The equipment is used but in good working conditions. Outlet Pressure Range: -3 mbar to 3 mbar Maximum Inlet Pressure: 0.1 bar DN 65 PN 16

Available in stock 1 x Used Bohmer Kugerlhahne Gas Ball Valve type FSK V 016.065 with Filter and Dungs Differential Pressure Switch GW 50 A4. We also have other elements of the gas train available, namely: 1 x Gas Pressure Regulator DN65 PN16 2 x Solenoid Gas Valves DN65 PN16 1 x Gas Filter DN65 PN16 The equipment is used but in good working conditions. Pressure Switch Maximum Operating Pressure: 500 mBar DN 65 PN 16

SHW Uniforce 5 Travel • X-axis (bed): 5,000 mm • Z-axis (vertical): 1,000 mm • Y-axis (headstock): 1,300 mm Control • CNC control: Siemens SINUMERIK 840D Universal milling head in orthogonal design • Swivel range milling head holder: 360 x 1 degree • Swivel range milling head: 180 x 1 degree • Tool holder: HSK 100 • Speed range: 22 – 4,000 1/min Year of construction 1998 • 2022 – partial overhaul o Inspection of all components -> replacement if necessary o General overhaul milling head o Geometric acceptance takes place after New machine acceptance protocol Clip •Mounting table: Conveyor • Task length: Coolant device • Paper belt filter system • Container capacity: 800 l Automatic tool changer •Tool magazine with 90 magazine slots Reversible clamping device Rückle PKTW 2 About us: MBM Maschinenservice & G ...

- flat pile feeder - 1st station with 4 buckles - 2nd station with 4 buckles - Gate fold - Mobile cross fold station - stream delivery

Industrial air conditioner, switch cabinet cooler, SK250E2V-20100, BKW, mint condition Special price The current price of a similar product is € 5.350 excl. VAT If you have a VAT nu mber, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock (1998) but never in operation, is in a completely mint condition and in ist original packaging. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price. 40 x 25 x 85cm, ca. 55kg

Description – max. delivery quantity 80 m3/h – max. pressure ±900 mbar rel. – two pumps available (year of construction 2000 and 2002)

feed pressure: 8 bar Effective free air delivery: 130 l/min L/min Receiver capacity: 6 l / bar weight of the machine ca.: 15 kg. Number of cylinders: 2 Stk. motor: 230V / 0,75KW V / KW range L-W-H: mm Low-noise compressor with 78dB The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 - Aerzen GM7L - Rotary lobe blower unit Delta Blower generation 5. Positive pressure. Suction pressure: 0,613 bar Discharge pressure: 1.013 bar Power : 7.5 kW Flow rate: 420 m3/h Oil free ATEX classification Weight : 381 kg Equipment sold with original filter + a new one. Blower with silencer, frame integrating a resonance absorber, machine feet, connection to the body with silencer for non-return valve, safety valve, vaccuostat with pressure gauge. 2 - Infastaub MKR 0-1/20 - Secondary safety filter Temperature: 0?C/+40?C Filter surface: 20 m2 Volume: 360 m3/h Structural resistance: - 500 mbar Filter quality: H14 Filter body : Stainless steel ATEX classification Equipment sold with original filter + a new one.

feed pressure: 7 - 9 bar Effective free air delivery: 230/130 l/min L/min Receiver capacity: 10 l / bar weight of the machine ca.: 25 kg. Number of cylinders: 2 Stk. motor: 230V / 1,4KW V / KW range L-W-H: 600 x 310 x 510 mm Low-noise construction compressor 53 - 60dB The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Explosion proof motor 3 KW (ADF / ATEX: EExdellCT4) 2870 rpm IP 55 Turbine D.125 Volume, max. with H2O): 5000 l Viscosity, max. 15000 mPas Process pressure (max.) 0 bar Vacuum, max. 100 mbar Process temperature, max. 120 ?C Mixing tools Propeller Motor power, standard 3 kW Shaft size D.40 X L.1000 Weight approx. 42 kg New sealing cartridge installed (seals, ...) The IKA ROTOTRON? RT is an all-purpose jet-flow agitator used for homogenizing, dispersing, suspending, emulsifying, aerating, dissolving and improvement of heat transfer. The RT is most effectively used for tasks ranging between that of a conventional stirring machine and a dispersing machine with a rotor-stator system.

Bürkle Multifoiler Model BTF 1628/60 Year 1997 Plant for coating smooth and formed MDV parts with thermoplastic films, of roll or as a cut, for film PVC,PP,high gloss PVC,ABS. Suitable for thermoforming or membrane process. Max part size 1250x 2550 mm/ Divide thickness 6-35 mm Hot plate dimensions 1600 x 2800 mm max heating temperature 140° Stroke 230 mm Control Siemens Total connection 38 Kw Weight 16,5 t

Type MB6023HK Working width 230 mm Working height 150 mm 6 spindles B, R,L, T, T,B Spindle diameters 40 mm Feeding speed 5-30 m/min Total power. 38.25kW Transport dimensions 3750x1600x1500mm Weight 3400 kg Price 21300 Eur (EXW Jonava, Lithuania

honing diameter: 1,5 - 165 mm bore length: max. 406 mm spindle turning speed range: 200 - 2500 (12x) U/min stroke speeds: 80 - 310 (5x) Hub/min weight: 0,60 t connected load: 2,5 kW range L-W-H: 2x1,3x1,7 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vacuum lifting device for paper rolls NAGRON AEROLIFT Vacuum lifter for the paper industry Woudenberg Holland Type R96-20 Fabr. No. 9745 Year of construction 1999 Payload 2000 kg Centering mandrel 90 mm Suction surface Outer diameter 850 mm (plus seal)Suction surface inner diameter 250 mm (minus seal) Seal width 50 mm Suction surface 0.5 m2 Negative pressure min. -800 mbar Pumping speed approx. 100 m³/h per vacuum pump Motor power 2x 2.2 kW Mains connection 400 Volt, 50 Hz - 2 pieces Rietschle vacuum compressor, type VCE 100 Dimensions x H 1600 x 2250 mm Height with centering mandrel 2500 mm Total height in transport frame 2950 mm Net weight 2,5 ton.; used

Manufacturer: Infastaub GmbH Model: Infa-mat AM 451 S Year: 2015 Type: bag / pocket filter Filtration area: 45 m2 Air volume: 4020 m3/h Housing resistance: up to +/- 35 mbar Fan power : 5,5 KW Soundproof housing Automatic and mechanical cleaning of the filters after the process by a vibratory drive Dust collection: bucket

Multipli with pheumatic bow feeder , compresser, double sheet control , 2 pockets

Vacuum pump, airframe pump, rotary vane pump ALCATEL type 100-132 Fabr. No. 173082 - 3101 Year of construction: approx. 1995 Volume flow: approx. 50 m3/h Negative pressure: 0.5 mbar (indicated on the type plate)Negative pressure: - 0.9 bar (determined during test run) Motor power: 3 kW Motor speed: 1420 rpm. Mains connection: 400 Volt, 50 Hz - Oil-lubricated rotary vane pump Dimensions L x W x H: 700 x 420 x 310 mm Weight: 78 kg good condition; used

VMI Spiral Kneader Type: MB1024 AEH Specifications: – Automatic timer switching on and off – 2 speeds slow and fast – with 1 boiler – with flour dust cover - Year of construction 1999 Height: 180cm Width: 140cm Depth: 120cm

Sell Vacuum pump used Type: Busch 250-138, Vacuum: 20 mbar, Motor Oil: Type SAE30, Engine: Delfin, Year of manuf.: 2012, Power 3,45 kW, 230 volts, 15 A,

Control Fanuc ... 18i - MB5 Clamping table surface ... 1320 - 620mm Axis X ... 1050mm Axis Y ... 640mm Axis Z ... 800mm Spindle speed... 0-8000 rpm controlled axes ... 4 cooling ... 25-70bar ISO 50 workpiece weight... 1350kg Machine weight ... 6900kg overhauled: in 2022 Chip Conveyor Rotary table Nikken series CNC260B Workpiece touch probe MP12 The machine is in good condition, possible to test under electricity.

Elmo Rietschle oil-lubricated rotary vane vacuum pump complete with 15 kW/50Hz 3~motor, 700 m³/h, 0.10 mbar(abs), completely overhauled

Slip belt Magnetic conveyor, magnetic slip conveyor DGS System GmbH Z-conveyor, sliding belt system, conveyor belt, magnetic belt conveyor Type no.: MBF 326P31,75 Com.- No.: 44489-10 Year of construction 2017 Slide width 300 mm Distance of permanent magnets 250 mm Insertion length approx. 3400 mm (up to construction box)Insertion length approx. 3900 mm (without mounting box) Insertion height 210 mm Slide-in width housing 370 mm Insertion width Thread holders for adjustable feet 410 mm Insertion width on the mounting box 470 mm Conveying height - ejection height approx. 1040 mm Conveying speed approx. 2 meters/min. Motor power belt drive 0.37 kW Mains connection 400 volts, 50 Hz circulation chain equipped with permanent magnets Space requirement L x W x H 5200 x 700 x 1500 mm Weight 410 kg very good condition; used

: R10-R260 bending speed: 2,5 U/min : 42x3 mm : 42x2,5 mm : 30 mm : 54x2 mm total power requirement: 1,5 kW weight of the machine ca.: 80 kg dimensions of the machine ca.: 410x1000x570 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Verhagen Industrie Staubsäuger (construction site) Type: Comzu F3313 B3 VLSFF313003-B3 Electrical: 380V or 220V Motor: 3 1.1 KW Construction: container stainless steel, heavy duty frame for construction site with wheels and protective cover Capacity: 628 m3/uur Vacuum: 220 mBar Cleaning: Mechanical Container: 45 liters Suction supports: ø90 mm Filter surface: 0.85 m2, Teflon IP44 Noise: < 70 dBa Wheels: 2 rubber Dimensions (L W H): Weight: 68 kg Condition: Fully functional Option: Auto start-stop link with processing machine 220V/380V

Vacuum pump Rietschle Nswxx0au Type CLFEH 250 V No.395837 Volume flow 250 m³/h Suction pressure 15 Torr =19.70 mbar=0.02 bar Motor power 5.5 kW Speed 1400 rpm Weight 274 kg used

technical details: - Volume flow (V): 5,000 m3/h - Shaft power (Pw): 15 kW - Shaft speed (nw): 2490 rpm - Pressure ( Pt): 45 mbar - Diameter intake manifold (suction side): 360 mm - Dimensions outlet opening (pressure side): 400 x 255 mm (inside), 48 x 335 mm (outside) Dimensions (WxHxD): 1,600 x 1,200 x 1,400 mm The fan has been electrically and mechanically tested and partly repainted! (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

8 Color Stack UV Flexo Printing Machine Overhauled 2020 with installation IST MBS 7 UV system in 2020. Substrates: OPP,BOPP,PET,PVC,OPS,paper,aluminium foil. Print width max 560 mm, Material width max 580 mm 8 flexo printing units Speed 200 m/min, Camera (E+L) Register control (E + L

Gear motor Flender MBH 125CC-B 27.7/1 Bevel helical gear drive motor 11 kW at 1400 1/min. 230/400 V, 50 Hz, IP 55 were operated with frequency converters Matching Freqenzumrichter Walther Flender ZZ0103069.34003 Sinus Penta available A total of 15 traction motors and 12 drives ! available Very good condition, straight from production!

sheet width: 2020 mm plate thickness: 2 mm control: Beijer daylight upper clamping: 100 mm Bending angle: 0 - 135 ° upper clamping drive: 0,375 kW bend clamping drive: 1,125 kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: 3 x 1,1 x 1,75 m Foot switch with emergency stop: Segmented upper tool: Oil filling: exklusive Light barrier control: Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

VACUUM MASSAGER LUTETIA TYPE 1, WITH BUSCH PUMP TYPE:100-136 Technical description: Drum diameter: ?1000 mm Capacity: 500 liter Vacuum: 2 mbar Busch pump type: 100- 136 (Serial number:176722) Pump dimensions: 700 x 400 x 450 mm Machine dimensions: 2400 x 1300 x 1800 mm

#4444 - VACUUM PUMP GARDNER DENVER Manafacture: Gardner Denver Power: 7.5 kW; 8.8 A; 350 mbar

Machine Details Stock-No. 1105-03856 Type of machine CNC Lathe Make COLCHESTER Type TORNADO T 6M Year of manufacture 2006 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Great Britain Delivery time immediately Freight basis EX WORK Technical details turning diameter 440 mm turning length 450 mm control FANUC 21 ITB total power requirement 15 kW Weight of the machine approx. 4 t Additional information NICE COLCHESTER T 6M FROM 2006 FANUC 21 ITB CUCK TAILSTOCK SWARF CONVEYOR VDI 30 TURRET 12 P LIVE TOOLS BARFEEDER MBF 1000 INCLUD

: 200 mbar : 248 m³/h turning speeds: 950 U/min total power requirement: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Table size: 2200x450 mm (extendable) Installed power: 5 Kw EQUIPMENT: Drive on 3 rollers Accessories

Suction nozzle diameter: 160mm; Nominal flow rate: 1780 m³/h; Volume flow monitoring: pressure differential indicator; Vacuum: 21 mbar; Filter area: 11.5 m²; Residual dust content: less than 0.2 mg/m³; Noise level: Chip bag volume: Filter cleaning: manual; Motor power: 2.2 kW; Machine length: 1600 mm; Machine width: 800 mm; Machine height: 1900 mm; Weight:

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Scania Engine: DC13-71A(02-01) - Stage 3A Engine No.: 7395788 Power: 315 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Mecc Alte Generator type: ECO 38.2 L 4 C Gene. No.: P242434 Generator power: 350 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 740 Dimensions of the power unit: Width approx. mm: 1.800 Height approx. mm: 2.340 ...

length: mm height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Pulse welder Hybrid 4002 Year of manufacture 2005 Feeding device / 4 rolls wire feed DV 39 machine no.: 940 16 222 - Welding hose 4000mm - Ground cable 70 square 5000mm - Intermediate hose package approx. 4000mm - Hose package Binzel MB511 Pulse current The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: AXIS Type: 703MG7.5T Capacity: 3420 m3/h Vacuum: -270 mbar Operating pressure: 260 mbar Power: 7.5 kW

Planing width approx. 490/500 mm (at end position dressing stop) Table width 52 cm Table length 2210 mm Tersa planing shaft (4 knives) Motor power 7.5 kW Table height adjustment electric Thickness table guided on 4 spindles 2 feed speeds manual star-delta switch Emergency stop switch Suction nozzle Ø 160 mm Power: 400 V, 50 Hz, 3~, 15.5 A

- Handwheel adjustment of spindle height/angle - Spindle angle displayed via viewing window, swivel range -4 to + 45° - Right-left rotation - double-sided table extension to 2,000 mm - Engine power 5 kW - Speed 3,000 / 4,500 / 6,000 / 9,000 / 12,000 rpm (manually adjustable) - Suction nozzle Ø 2 x 120 mm - Emergency stop switch) - Power: 380 V, 50 Hz, 3~, 10.8 A - with 4-roller feeder

Sprintus_Industriesauger Craftix 35 M Product name: Industrial vacuum cleaner Type: Craftix 35 M Manafacture: Sprintus Article number: 118.030 Year of construction: 03/2023 Condition: Brand New Technical details: - Mains voltage: 220-240 V / 50-60 Hz - Power: 1,200 W - Sound pressure level: 75 dB(A) - max. vacuum: 250 mbar - Volumetric flow: 74 liters / sec. -Plastic containers - Container volume: 35 litres (gross) - Power cord length: 10.0 m - Suction hose length: 5.0 m - Suction hose diameter: 35 mm - Diameter intake manifold: 38 mm, 2.50 m - Weight: 16.0 kg - Dimensions (LxWxH): 54 x 39 x 63.5 cm Equipment: - Stainless steel intake manifolds, 2 x 0.5 m - Dry floor nozzle 450 mm - Crevice tool - Round brush - HEPA 13 cartridge filter - Power tool adapter 35 mm diameter - Power tool adapter 21, 25, 32 mm diameter - Non-woven filter bag - Disposal bag  ...

Surface Grinding Machine FAVRETTO MB100, 1000x500 mm, magnetic plate, Auto-control CN, Information about technical data are not binding., Machine available subject to prior sale., Max working dimensions: 1000x500 mm, Working table size: 1000x400 mm, Longitudinal travel x axis: 1000 mm, Cross travel y axis: 450 mm, Clearance between worktable and spindle axis: 750 mm, Feed rate x axis: 2 - 40 m/1, Feed rate y axes: 0 - 5 m/1, Wheel speed: 1400 rpm, Wheel dimension: 400x127x50 mm, Spindle motor power: 9 Kw, Nc: Auto-Control FAVRETTO, Weight: 6.000 Kg, Accessories: Electro permanent magnetic plate, coolant tank with paper filter, dresser (U Axis)