mazak mill used for sale

Inlet opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor blade: 6 x 3 With base frame Feed opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor knives: 6 x 3 With base frame

Inlet: 450 x 580 mm Rotor width: 600 mm Rotor diameter: 450 mm Rotor blades: 3 Stator knives: 2 Motor: 55 kW

Efficient

HBM STANKO 2A622 CNC

LAGUN NG- L 1800 CNC universal milling machine LAGUN Machine Tools S.L.- Spain Control HEIDENHAIN TNC 360 X-axis 2300 mm Y-axis 650 mm Z-axis 600 mm Table 1900 x 550mm Table load 2,5t Spindle speed stepless 50 - 3000 rpm Spindle taper SK 40 Spindle motor 9.5kW Total power 15 kW Feeds -stepless- 0 - 5000 mm/min Rapid traverse 10m/min Tool changer 20 tools Weight ca. 6,5 t Accessories: 3x Vices, about 10 tool holders, touch probe, others

USED BACHILLER STAINLESS STEEL BEATERS MILL REF.: C4750 Beater mill with a mobile disk with hard wear resistant steel plates. It can be used by two edges, against a static track. It is considered a cold mill because of the high air flow it generates.

Machine Details Warehouse number 1105-03525 Machine type tool milling machine - Universal SIA brand Type 470 Year of construction 2001 Control type CNC Control ANILAM 53000MK Storage location FRANCE Country of origin italy Delivery time immediately Freight base from location Technical details x-travel 750 mm y-travel 450 mm z-travel 500 mm Control ANILAM 53000MK Speed range - spindle 4500 rpm Drive power - Milling spindle 7.5 kW Feed - Fine adjustment 5 ~ 1000 mm/min Rapid traverse X-axis 15 m/min Rapid traverse Z-axis 15 m/min Rapid traverse Y-axis 20 m/min Total power requirement 20 kW Machine weight approx. 3 t Space requirement approx. 3.2 x 2.1 x 2.5 m Accessories Coolant device Information Tool milling machine - Universal WITH ANILAM 5300 MK CNC WITH NEIHGBARER HEAD TABLE 1050 X 500 MM

Control: Dialog 11 with new MCP card Travel range: x-800 y-600 z-550 mm Spindle speeds: 18 – 6300 rpm Pinole by hand: 80 mm Recording: SK 40 Feed: 2 to 10000 mm/min Rapid response: 10000 mm/min Weight: approx. 4050 kg With full cab, chip conveyor, electr. Handwheel Installation dimensions: L: With controller and chip conveyor approx. 4200 mm (without conveyor approx. 3200 mm) B: approx. 3800 mm (With space to open door E-cabinet approx. 4600 mm) H: approx. 2400 mm Can be visited under electricity.

Stock# U2462-4 Used ball mill with stainless steel drum. Polish made. Total volume about 1500 l. Working volume about 500 l. Belt driven by el motor 4 kW, 1410 rpm, 220-380 V, 50 Hz and reducer. Mounted on carbon steel supporting frame. Includes local control panel and alumbit milling balls. Last time used in chemical production (mineral pigments).

Year of construction 2001 Siemens 810D Operating hours 1988 Travel distances 350 x 240 x 340 Spindle speed 20 - 6300 Drive power 6.3/10 KW Total connection power 15 kW Tool holder SK40 Accessories: el. Handwheel Spühlpistole Universal swivel rotary table 400 x 280 mm, Rotation range 360 °, swivel range +105/-15 ° with electronic angle display Coolant device

Wanderer ISO 40

Granulator - Moditec Digicolor Gplus1 / New, unused (2 pcs.) Year of Make: 2016 Location: Lodz, Poland Description: Slow-Moving Granulator with Gearbox Granulate mill is used for grinding the very hard details, waste - just like the crusher Power: 2.2 kW 6 stator blades, 1 x push, rotor with milling cutters Hopper inlet: 220x170 mm Grinding chamber opening: 240x180 mm Granulator without sieve, regulation of the mill thickness by means of the hole adjustment between the milling machine and stator knife Hole for material case is prepared for connection with suction conveyor When the shredded molding is blocked/clamped in the cutting chamber, rotor knife will retract and it will restart to crush the molding. Drawer for material case with mixer All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technica ...

DECKEL FP4 NC Fraesmaschine Dialog 4 Dialog 4 control, working range 560 x 500 x 450 mm, pinole stroke 80 mm, 18 spindle speeds 31.5 -6300 min, folding head, tool holder SK 40, feed speed 1-4000 mm/min, rapid traw 6000 mm/min, table load 800 kg, weight 2070 kg, total connection value 16 kVA.

PVS 125 H i Mirco-cut Colloidmill -Ultra-fine shredder 1 Models 11 KW 15 KW and 22 KW

Manufacturer: Blaw Knox Revamp: Clecim (1995) Configuration: 22.5”x 53 x 48”4Hi 5 Stand TCM Stand 1 Power: 1500 HP Stand 2 & 3 Power: 1750 HP Stand 4 & 5 Power: 2413 HP Main Sensors: 3 X Ray Gages                            Flat meter roll HGC: Long Stroke Cylinders in all Stands Work Roll Bending: Positive and Negative WRB available just in Stands 4 and 5 Actuators for Flatness Control: WRB and multizone WR coolant Stand 5 Strip width range: 600 - 1060mm Strip thickness range: 0.17 – 1.9mm Maximum Speed: 790 m/min Coil weight: Max 18.8 MT Capacity: 320.000 MT per year Crew: 6 Operators + 1 Crane Operator

Manufacturer: Bliss Revamp: Clecim (1994) Configuration: 19”x53”x48” 1 Stand 4Hi TMM Main Equipments:   1 Uncoiler Entry Bridle (Two Rolls 20”) Anti- crimping roll Work Roll Bending Exit Shear Exit Bridle (Two Rolls 20”) Electrostatic oiler (both sides) Tension reel HGC                                   Strip width range: 600 – 1060 mm Strip thickness range: 0.17 – 1.9 mm Maximum speed: 610 m/min Coil weight: Max 18.8 mt Inner ⌀ at exit: 508 Capacity: 300.000 MT per year Crew: 3 Operators                                                                                                                                                    

Granulator - Wanner D25.38 s Year of Make: 2011 Location: Lodz, Poland Description: Slow-moving granulator with gearbox, with cyclone and dedusting Power: 7.5 kW 2 stator blades, 18 rotor blades, the sieve - interchangeable Rotor and blade are cooled with water Hopper inlet: 430x380 mm Grinding chamber opening: 390x290 mm Automatic feeding of the regrind to the big bag It is very easy to clean the grinder, which is especially recommended if the color of the ground fabric is changed often All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

aschinella details Warehouse number 1105-03375 Machine type Milling machine - Universal CmE brand Type FC 1100 Year of construction 1991 Control type NC Storage location FRANCE Country of origin spain Delivery time immediately Freight base from stock Technical details x-travel 1100 mm y-travel 700 mm z-travel 500 mm Receiving cone of the main spindle 40 SK Motor power 10.6 kW Table clamping surface 1400 x 450 mm Speed 40 - 1800 rpm Dimensions L-W-H 2.4 x 2.15 x 2.1 mm Machine weight approx., 3800 kg Information Equipment: - Heidenhain - Control model TNC 124 - Universal milling head "Huron" design - 2 counter holders for horizontal milling - autom. Tool clamping - Lighting - Central lubrication

I sell a combined pin cutting machine with drill head BALESTRINI I2F 1 swivel table with pneumatic material pressure. Automatic cutting saw from below. Milling head for pin or finger joint production. Drill head for dubel drilling production 3 spindle. Feed automatically. End sensors positioning. Available the same.

Granulator - Wittmann M2/CM5 (5 pcs.) Year of Make: 2011 Location: Lodz, Poland Description: Slow-Moving Granulator with Gearbox Power: 1.1 kW 2 stator blades, 2 x push, rotor with the milling cutters Hopper inlet: 240x210 mm Grinding chamber opening: 240x116 mm Granulator without sieve, regulation of the mill thickness by means of the hole adjustment between the milling machine and stator knife Granulate mill is used for grinding the very hard details, waste - just like the crusher Hole for material case is prepared for connection with suction conveyor All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

TECHNICAL DATA SHEET CNC – Gantry gantry milling machine TRIMILL brand Type VF3016 Year of construction 2017 Control HEIDENHAIN iTNC530 HSCI Travel X-axis (longitudinal): 3,000 mm Y-axis (transverse): 1,600 mm Z-axis (vertical): 1,200 mm B-axis (swivel axis milling head) +/- 100 ° C-axis (rotation axis milling head) +/- 240 ° Structure / Axis concept AC servomotors with digital control for all axes Gantry drive of the X-axis Rack and pinion drive in the X-axis, backlash-free due to electrically prestressed, water-cooled motors 2 ball screws each in the Y and Z axes Guides of all linear axes are designed as prestressed roller guides Hydro-pneumatic weight compensation of the Z-axis via 2 cylinders Stationary frame components made of mineral casting, movable main components made of grey or nodular cast iron Double beams in load- and thermosymmetric d ...

Hammer mill Tornado THM 90 A for waste grinding Power 15 kw Hopper with reel, dosing screw, control box Complete with all attachments Good condition

Universal milling machine Lagun from a training workshop in top condition! Head universally rotate, swivel and tilt. Type: FTV2 YOC 2006 Tool holder SK40 Drilling pinole Coolant device Travel X-axis x00 mm Travel Y-axis x60 mm Travel Z-axis x40 mm Milling head type Vertical milling head Speed range 40 - 2000 mm/rev Table clamping surface approx. x00 x x00 mm T-slot size xx mm Feed X-axis xxx mm Feed Y-axis xxx mm Feed Z-axis xxx mm Weight approx. 1,850 kg Further data on request, rest according to photos Special price

Granulator - Shini SG-2427H Year of Make: 2007 Location: Lodz, Poland Description: Slow-Moving Granulator with Gearbox Power: 1.5 kW 2 stator blades, 2 x push, rotor with the milling cutters Rotor is cooled with water Hopper inlet: 270x240 mm Grinding chamber opening: 290x260 mm Granulator without sieve, regulation of the mill thickness by means of the hole adjustment between the milling machine and stator knife Granulate mill is used for grinding the very hard details, waste - just like the crusher Hole for material case is prepared for connection with suction conveyor All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Tool milling machine from a training workshop in very good condition Manufacturer Klopp Korradi Year of construction 1991 Digital SK40 automatic feed in three axes Drilling pinole 50 mm Head rotatable Spindle speeds up to 45-1950 rpm x-310 mm y-180 mm z-310 mm Table 600 x 250 mm Feed infinitely variable 10 - 470 mm/min. Machine dimensions approx. 1.0 x 1.1 x 1.6 m Power connection 400Volt 10 Ampere 3-axe digital device AXEsta Counter-holding for horizontal milling Coolant device Chip tub Special price

rpm : 6.300 Weight : 220 kg.

1 KERN high precision Micro 5 Axis CNC Milling & Drilling machine type HSPC 2216, year 1997, serial number 352, HEIDENHAIN type TNC 426 PB CNC 5-axes contouring controller, polymer concrete monobloc machine frame, working ranges X 220mm, Y 160mm, Z 248mm, electro pneumatic tool changer, magazine for 32 tools, tool changing time approx. 3,0 sec., mid chip-to-chip period approx. 7 sec., brushless and digital drive system travel speed 6.000 mm/min., Z-axis protection by s/s lamelles, half-round sliding door offering a maximum of operator handling comfort, standard chip tray for protection of the X and Y axis, with HEIDENHAIN electronic handwheel type TNC 426 for manual adjustment of the axes, Table 365 x 240mm, Max Clamping area 350 x 230mm, Max workpiece weight 40Kg, 4th & 5th Axis attachment, Fischer Precise Spindle 42,000rpm, 2.6Kw, HSK25E Tool Adapter,  ...

Table clamping surface: x-travel: 400 mm y-travel: 175 mm z-travel: 450 mm Spindle mount: ISO 30 Spindle speeds: 50-2000/50-3400 rpm Operating voltage: 380 V Total power requirement: approx. 2.5 kVA kW Space requirement: 1200 x 1000 x 1600 mm Weight: approx. 1100 kg

Make OKUMA WITH A NEW SPINDEL IN 2019 - RUNS ONLY 6 MONTHS AFTER WAS CHANGED MOTOR AND SPINDLE type MX 45 VAE Year of manufacture 2001/3 CONTROLS: OSP - U100M Technical Details x-way 762 mm y-way 460 mm z-way 450 mm total power requirement 35 kW machine weight approx. 5000 KG Type: MX - 45 VAE Control: OSP - U100M working range: Axis X: 762 mm Axis Y: 460 mm axis Z: 455 mm Spindle speed range: 50 - 7 000 rpm VARIABLE SPEEDS ATC: TOOL BT 40 TOOL MAGAZINE 20 TOOLS tool magazine: 20 pcs. Total power requirement: 35 kVA LAST SERVIS ON SPINDLE ON 2019 - ( BRAND - NEW SPINDLE) COST OF SERVICE OWER 35000 EUR , MACHINE WAS WORKING FROM THAT TIME ONLY HALF YEAR. WE ORGANIZE FOR CLIENT AS WELL TRANSPO

Handy edge milling machine 230V. Scope of delivery as shown. Edge milling up to 7mm, round edge milling up to R3mm. Angle adjustable. HM plates rotatable and replaceable. This new machine comes from a warehouse clean-up. Scope of delivery incl. chip catcher (not shown here).

-Granulator with sound insulation -Working width: 600 mm -Rotor diameter: 400 mm

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaTurning diameter500 mmSwing diameter over guide ways500 mmMax. Turning Length1200 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power (100% ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power (100% ...

KIMLA BPF 1530 CNC router was built in 2014 in Poland by POLCOM Przemysław Kimla. The machine, dedicated to both small and medium-sized businesses, is the perfect choice for precision machining of a wide range of materials. All machining processes, i.e. milling, cutting and engraving, are performed on a large vacuum table by a powerful high-speed spindle. X,Y,Z axes are, in turn, driven by reliable digital servo drives that provide the appropriate acceleration and speed in each direction. The BPF 1530 CNC milling machine is offered with an extensive range of equipment, consisting of, among others, a BECKER vacuum pump and a tool correction sensor. The machine has undergone regular maintenance and servicing. During the last service in the second half of 2024, the vanes in the vacuum pump were replaced. It is also possible to purchase an additional new spindle at a net price of 2250 EU ...

SPECIFICATIONS: Engine power HP: 3 Vertical leadership support Replacement tools available

X - axis 600 mm Y - axis 450 mm Z - axis: 450 mm B - Axis - 120 / + 45 ° C - Axis 360 ° Spindle speed range 20,000 rpm Spindle drive 18 KW Torque 91 Nm Tool holder 63 SK Pallet size 350 x 350 mm Large pallet load 150 kg Number of tool locations in the magazine 60 Large tool diameter 80 (125) mm large tool length 200 mm Gross tool weight 6 kg Tool change time approx. 3 sec. Feed range m/min Express feed m/min Rapid traverse B - axis 50 rpm Rapid traverse C - axis 140 rpm Machine weight 8100 kg Machine dimensions 6.6 x 4.0 x 2.8 m CNC HEIDENHAIN iTNC 530 Electr. Handwheel Probe BLUM Laser Direct displacement measuring systems 60-speed tool changer NC - Swivel rotary table (Torque) 7-fold pallet changer Spindle coolers SIGMATEC 15 / 900 cbm/h Oil Mist Extraction Internal coolant device 18 - 70 bar Conveyor

I sell a tenon machine for parallel milling, grooves for pallet tape etc. WACO T2-SL Year of construction 1984. Groove width 30mm. Motor 3,3kW Made in Germany. Available the same. With dokumentazion.

PLOT ELECTRONICS SENTINEL N 2160 CNC router was built in 2021 in Poland by PLOT Electronics. This extremely efficient machine is the perfect choice for precision machining of a wide range of materials, i.e. aluminium, plastics and wood. The machining process is performed on a large vacuum table by means of a reliable, high-speed spindle. X,Y,Z axes are in turn driven by reliable servo drives, which provide appropriate acceleration and speed in each direction. All this is complemented by a light, yet rigid design that eliminates any vibrations during even the most intense challenges. The offer price includes extensive equipment, consisting of, among others, a vacuum pump and advanced cncGraF Pro software. The SENTINEL N 2160 CNC milling machine weighs approximately 2000 kg. Technical specifications of the PLOT ELECTRONICS SENTINEL N 2160 milling machine - software: cncGraF Pro - mach ...

For sale is an entire fully CNC-controlled planing mill. The planing mill can be visited during operation. A visit training is possible when buying before dismantling. The system has been in reliable operation since 1981 and has always been professionally maintained. Equipment: 1. Stacking Task 2. Rupa vacuum lifter - Age: approx. 1.5 years 3. Cross Conveyor 4. Canali Cut-off Band Saw - 2 band saws 5. Longitudinal/transverse conveyor incl. roller conveyors 6 Costa planing machine with 10 spindles - Fully CNC controlled Spindle configuration: 1 spindle horizontal 2 Lifting spindle right vertical 3 Lifting spindle left vertical 4 Lifting spindle horizontal 5 Lifting spindle right vertical 6 Lifting spindle left vertical 7 Lifting spindle top horizontal 8 Lifting spindle bottom horizontal 9 Lifting spindle at the bottom horizont ...

For sale is a used pelletizing line that has pelletized fertilizers based on wood fibers with cattle manure and fermentation residues in the last 4 years (approx. 5,000 h in total). Various well-known manufacturers are installed such as Amandus KAHL pellet mill / continuous mixer, Bühler hammer mill / conditioner, CPM pellet cooler, Wynveen pellet screen, Rako / Apullma conveyor technology Achievement: 1. Wood chips with cattle manure, dried approx. 1.5 t/h 2. dried, separated compost / dried digestate approx. 2.5 t/h 3. According to the manufacturer KAHL, the press can produce up to 3 t/h in the biomass Since the customer is now converting his business, it is for sale. In principle, the aim is to sell the entire line, a partial sale of the components is also possible by arrangement. The main components are: -Conveyor - Grinding: Hammer mill with screen drum, 2-fold ma ...

Table clamping surface: 300 x 1100 mm Travel x: 780 mm Travel y: 250 mm Travel z: 410 mm Cbgaxkvf39 Spindle holder: SK 40 Pinole stroke: 100 mm Spindle speeds: 31.5 - 1400 rpm Feeds longitudinally and transversely: 12.5 - 630 mm/min Feeds vertical: 6.3 - 315 mm/min electr. Connection: 380 V, 5.5 kW Space requirement: 1770 x 1500 x 2050 mm Weight: approx. 2200 kg

COMEC Pearl Mill M 8 Stainless steel Double jacket Container capacity 8 l Very good ready-to-use condition, directly from production!

CNC Model: Heidenhain CNC Version: ITNC 640 Head Type: Automatic Fourth and Fifth Axis Head Additional technical notes for the head: 0.001° positionable head Tool Mount: ISO 50 Spindle power: 38Kw Number of spindle speeds: 4000 Number of tools: 40 X-axis travel: 4000mm Y-axis travel: 1300mm Z-axis travel: 1500mm Fast feeds linear axes X Y Z: 20m/min Table dimensions: 4100 x 1100mm Table capacity: 12000Kg Guides: roller CNC divider: yes Rotation: Continuous Cutter type: fixed bench Chip conveyor: belt Machine equipment: optical scales :::D DIMENSIONS AND WEIGHT::: Length: 10560mm Width: 4200mm Weight: 26000Kg

SERON 1310 PRO CNC router was built in 2020 in Poland by SERON Sp. z o.o. Sp.k. The machine, designed for precision machining of a wide range of materials, is distinguished by a number of modern, carefully selected components with the best technical parameters. Materials such as mild metals, composites, plastics and solid wood are machined by means of a high-speed brushless spindle. The design, made entirely of stress-relieved steel profiles and sheets, in turn, ensures the long-term stability and dimensional precision of the machine. The operator has at his disposal an industrial, professional CNC control with many useful functions. Among them, there is for example the smooth vector analysis function, which ensures that the machine runs smoothly even with dynamic changes in direction and complex shapes. All equipment is integrated inside the security fence. The 1310 PRO CNC milling m ...

Skoda W200H - CNC Plate Boring Machine – Bearing Sleeve (RAM) Year of construction : 1992 Electrical & Electronics Overhaul : 2021 Spindle : 200 mm ( Ø ) ISO 60 X : 7,800 mm Y : 5,400 mm W : 900 mm ( spindle ) Z : 900 mm ( Carrying sleeve / RAM 520 x 520 mm ) Z1 : 2,000 mm (table) CNC rotary table : 2500 x 2000 mm – 40 T Spindle speed : 0.8 - 800 rpm Rapid traverse speed : 6000mm/min Spindle motor : 75 kw Total power : 140 kW Machine weight : 84 T (approx.) Control : FAGOR 8055 Processing heads 3 pieces 1.Angular translation head 2. Vertical milling head 3.Horizontal milling head Base plate : 4,480 mm x 1,145mm Conveyor

NEW HERBOLD granulator Universal mill – heavy design -Year of construction 1998 - made in stainless steel - from the technical center (machine was used exclusively for experimental/demonstration purposes) - Rotor diameter: 300 mm - Working width: 500 mm - 3 rows of knives

Inlet: approx. 300 x 300 mm Rotor width: approx. 280 mm Rotor blades: 3 Dzk8qe Stator knives: 2 Drive: 7.5 kW Double slope With roller feeder, electric switch box and soundproofing box

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmMax. Turning Length1200 mmTurning diameter500 mmBar diameter max.65 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 ...

Agritec floor reversing milling machine UKO 40-120, for PTO 540 rpm, power requirement 18.5-45 kw (25-60 hp) Three-point attachment frame Cat.1, working width 115 cm, total width 142 cm, lateral displacement hydraulic 26 cm, this also allows use on walls, fences, etc. Equipment with trailing grid roller for perfect seedbed preparation. Weight approx. 412 kg. Incl. cardan shaft with friction clutch. 30 knives - all new, ready for operation, incl. cardan shaft with friction clutch. Further reversing milling machine 130 cm working width in stock as well as conventional tillers from 100 to 150 cm, ploughs, cultivators etc.

Vollrath Perlmühle VMSM 2/8 B Ex protected version Double chamber Grinding pot 2 x 8 l Double jacket Power 18.5 kW Very good ready-to-use condition, directly from production!