mazak int used for sale

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 95/65/H60 mm -Total weight: 2.2 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Interchangeable jaws: 3-piece top jaw set, unstepped -Width: 50mm -Bore: Ø 17 mm -Quantity: 2 sets of interchangeable jaws available -Price: per set -Total dimensions: 180/150/H80 mm -Total weight: 13.3 kg / 13.5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Handover: in current condition as seen -Toothing: 1 piece Damage see photos -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 115/65/H65 mm -Total weight: 2.2 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: rotating jaw set base jaws for four-jaw chucks -Jaw width: 34 mm -Dimensions: see photo technical. drawing -Quantity: 2 sets of interchangeable jaws available -Price: per set -Total dimensions: 130/135/H43 mm -Total weight: 4.1 kg / 4.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 24 mm -Dimensions: see photo technical drawing -Number: 2 sets of interchangeable jaws available -Price: per set -Dimensions total: 90/70/H65 mm / 90/72/H67 mm -Total weight: 2.2 kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: for three-jaw lathe chucks, hard -Jaw width: 50 mm -Grid: 1/16 -Dimensions: see photo technical drawing -Dimensions total: 110/150/H55 mm -Total weight: 3.5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: Base jaws for key bar chucks, helical toothed -Jaw width: 22 mm -Dimensions: see photo technical drawing -Number: 4 sets of base jaws available -Price: per set -Total dimensions: 90/65/H35 mm / 90/67/H35 mm/ 90/70/H45 mm with screws -Total weight: 1.1 kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: Base jaws for key bar chucks, helical toothed - Jaw width: 14 mm -Dimensions: see photo technical drawing -Total dimensions: 47/42/H20 mm -Total weight: 0.6 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Manufacturer: Forkardt, clamping claw clamping jaws for manual and power chucks -Clamping claw: Type SKA 140-32 -Clamping jaws: Type KBN 12 -Dimensions: see photo -Total dimensions: 105/200/H80 mm -Total weight: 4.3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: soft top jaws for key bar chucks, helical toothed -Jaw width: 22 mm -Dimensions: see photo technical drawing -Total dimensions: 120/65/H70 mm -Total weight: 2.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: soft top jaws for key bar chucks, helical toothed -Jaw width: 22 mm -Dimensions: see photo technical drawing -Total dimensions: 105/67/H72 mm -Total weight: 2.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 20 mm -Dimensions: see photo technical drawing -Quantity: 1 set of interchangeable jaws available Price: per set -Overall dimensions: 70/60/H55 mm / 70/60/H54 mm Total weight: 1.1 kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 20 mm -Dimensions: see photo technical drawing -Number: 2 sets of interchangeable jaws available -Price: per set -Dimensions total: 70/60/H54 mm / 69/60/H54 -Total weight: 1.1 kg/set

PLC control, electronic module, interference filter, power supply line filter, ballast, mains filter, power line filter, three-phase filter, three-phase mains filter, filter module, mains interference filter -Manufacturer: Siemens, mains filter interference filter -Type: :B84131-M3-A116 -Voltage: 440/2500V 50 - 60Hz -Dimensions: 180/105/H50 mm Weight: 1.7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: soft top jaws for key bar chucks, helical toothed -Jaw width: 22 mm -Dimensions: see photo technical drawing -matching key bar chuck: ID12273 -Dimensions total: 90/70/H68 mm -Total weight: 2.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece rotary jaw set, 3 sets -Jaw width: 34 mm -Dimensions: see photo technical drawing -Price/Sale: only complete -Total dimensions: 410/130/H80 mm -Total weight: 21.3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Manufacturer: Röhm, top jaws jaw set for three-jaw lathe chuck, hard -Jaw width: 18 mm -Dimensions: see photo technical drawing -Dimensions total: 61/54/H47 mm -Total weight: 0.7 kg

Interchangeable jaws, top jaws, segment jaws, clamping jaws, block jaws, base jaws, four-jaw chucks, four-jaw lathe chucks, 4-jaw chucks, faceplate, faceplate chucks, facing lathe chucks, clamping device for dividing head -Clamping jaws: 4 pieces for four-jaw chuck, faceplate chuck, dividing head -Clamping width: 55 mm -Dimensions: see photo -Shipping/Price: complete -Dimensions: 200/60/H140 mm -Weight: 3.4 kg/piece

PLC control, power module, LT module, I/R module, regenerative feedback module, monitoring module, UEB module INT/EXT. -Manufacturer: Siemens, SIMODRIVE 611 monitoring module -Type: 6SN1112-1AC01-0AA1 -Number: 2x module available -Price: per piece -Dimensions: 290/50/H480 mm -Weight: 4.1 kg/piece

PLC controller, electronic module, interference suppression filter, power supply line filter, ballast, mains filter, power line filter, three-phase filter, three-phase mains filter, filter module, mains interference filter -Manufacturer: Cloos, mains interference filter -Type: NEF FS5825 -Dimensions: 265/75/H50 mm -Weight: 0.7 kg

PLC control, electronic module, interference filter, power supply line filter, ballast, mains filter, power line filter, three-phase filter, three-phase mains filter, filter module, mains interference filter, noise filter -Manufacturer: Okaya, Noise Filter -Type: 3SUP-HL200-ER-6 -Voltage: 3x 500V 200A 50/60Hz -Dimensions: 480/200/H200 mm -Weight: 20 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: 6 sets of top jaws for key bar chucks, helical toothed -Jaw width: 26 mm -Dimensions: see photo technical drawing -Shipping/Price: complete -Dimensions total: 285/240/H85 mm -Total weight: 24.4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: hard top jaws for key bar chucks, helical toothed -Jaw width: 22 mm -Dimensions: see photo technical drawing -Dimensions total: 95/65/H70 mm -Total weight: 2.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece soft top jaw set -Width: 22 mm -Number: 2 sets of top jaws available -Price: per set -Dimensions total: 105/65/H45 mm -Total weight: 2.0 kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece hard top jaw set -Width: 32 mm -Number: 2 sets of top jaws available -Price: per set -Dimensions total: 90/95/H55 mm -Total weight: 2.1 kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 20 mm -Dimensions: see photo technical drawing -Dimensions total: 90/80/H70 mm -Total weight: 1.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: hard top jaws for key bar chucks, helical toothed -Jaw width: 26 mm -Dimensions: see photo technical drawing -Dimensions total: 115/78/H70 mm -Total weight: 3.2 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck -Jaw width: 26 mm -Dimensions: see photo technical drawing -Number: 1 set of interchangeable jaws available -Dimensions total: 110/79/H66 mm -Total weight: 2.9 kg/set

Frequency converter, frequency inverter, drive converter, controller, variable speed drive -Manufacturer: Siemens, Sinamics Active Interface Module 36kW -Type: 6SL3100-0BE23-6AB0 A5E37181752 FS: E -Input 3 AC 380-480 V 50/60 Hz -Number: 4x available -Price: per piece -Dimensions: 485/150/H270 mm -Weight: 17.7 kg/piece

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Manufacturer: Röhm, Top jaw set, rotary jaw set, 4-piece, for chuck size Ø160 mm, 2 sets -Jaw width: 18 mm -Dimensions: see photo technical drawing -Price/Fee: complete -Overall dimensions: 160/70/H50 mm -Total weight: 1.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set, drill jaw -Manufacturer: Röhm, drill jaw BB, size 200, 4-jaw set, 2 sets -Type: 110068 -Jaw width: 20 mm -Dimensions: see photo technical drawing -Price/Sale: only complete set -Overall dimensions: 160/70/H53 mm -Total weight: 2.8 kg

Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, communication processor -Manufacturer: Siemens Simatic S7 ET 200SP Interface Module -Type: 6ES7 155-6AU01-0CN0 -Number: 2 modules available -Price: per piece -Dimensions: 115/45/H75 mm -Weight: 0.1 kg/pc.

Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, communication processor -Manufacturer: Siemens Simatic S7 ET 200SP Interface Module -Type: 6ES7 155-6AU01-0BN0 6ES7155-6AU01-0BN0 -Number: 3 modules available -Price: per piece -Dimensions: 115/45/H75 mm -Weight: 0.15 kg/pc.

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 45 mm -Dimensions: see photo technical drawing -Overall dimensions: 180/135/H125 mm -Weight: 19.5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 45 mm -Dimensions: see photo technical drawing -Overall dimensions: 162/174/H175 mm -Weight: 18.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: hard top jaws for wedge bar chucks, helical teeth -Jaw width: 45 mm -Dimensions: see photo technical drawing -Overall dimensions: 167/135/H93 mm -Weight: 10.7 kg

PLC controller, electronic module, interference suppression filter, power supply line filter, ballast, mains filter, power line filter, three-phase filter, three-phase mains filter, filter module, mains interference filter, noise filter, ferrite adapter, ferrite filter -Manufacturer: Reis Robotics, Ferrite Adapter Filter, Ferrite Filter -Type: unfortunately without a type designation -Number: 3 filters available -Price: per piece -Dimensions: 150/140/H80 mm -Weight: 0.7 kg/pc.

Auction-ID: A1-45406-30

including aluminium profile protective cover Auction-ID: A1-45406-59

Auction-ID: A1-45406-130

Auction-ID: A1-45406-71

Intensive batch mixer with a usable filling per batch of 500 l. / 800 kg (max.), emptying via central bottom flap (hydraulically operated), tools: star whirler, mixing star with two blades and wall-to-bottom scraper. Agitator drive: 45.0 kW via V-belt (speed can be controlled via FU), drum and mixing star drive: 13.5 kW, hydraulic unit: 2.2 kW for lock actuation. Includes modern control cabinet with programmable control. Mixer completely overhauled in 2016. Available for an extra charge: Comfortable mixer platform / steel substructure incl. drawings and statics.

Clamping Force: 100 Ton Holding force: 110 Ton Maximum opening stroke: 380 mm Minimum mould height: 200 mm Maximum mould height: 430 mm Distance between plates: 610 mm Plate size: 600×600 mm Distance between columns: 420×420 mm Maximum weight supported: 700 kg Extraction stroke: 100 mm MORETTO receiver-hopper NOT included. WITTMANN granulate dispenser NOT included. SESOTEC metal detector NOT included. Screw diameter: between 25 and 35 mm - not accurately detected. Warning: the information reported has been taken from the manual and may not correspond to actual performance. For further information, on-site inspection is suggested. Approximate body dimensions: 4800×1900×2600 mm. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-45448-699

Clamping Force: 100 Ton Holding force: 110 Ton Maximum opening stroke: 380 mm Minimum mould height: 200 mm Maximum mould height: 430 mm Distance between plates: 610 mm Plate size: 600×600 mm Distance between columns: 420×420 mm Maximum weight supported: 700 kg Extraction stroke: 100 mm WEMO manipulator NOT included. MORETTO receiver-hopper NOT included. WITTMANN granulate dispenser NOT included. SESOTEC metal detector NOT included. Screw diameter: between 25 and 35 mm - not accurately detected. Warning: the information reported has been taken from the manual and may not correspond to actual performance. For further information, on-site inspection is suggested. Approximate body dimensions: 4800 × 1900 × 2600 mm. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-4544 ...

For an injection moulding machine, hole diameter 125 mm Auction-ID: A1-43992-208

For an injection moulding machine, hole diameter 125 mm Auction-ID: A1-43992-207

For an injection moulding machine, hole diameter 125 mm Auction-ID: A1-43992-210

For an injection moulding machine, hole diameter 125 mm Auction-ID: A1-43992-209

Each micrometer features two easily interchangeable anvils. This model features a 400-500 mm measurement range. Graduation: 0,01 mm Machine condition: unchecked. Approx. Transport dimension: LxWxH 760 x 530 x 70 mm; Approx. Weight: 8kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-242

Each micrometer features two easily interchangeable anvils. This model features a 700-800 mm measurement range. Graduation: 0,01 mm Machine condition: unchecked. Approx. Transport dimension: LxWxH 800 x 1090 x 105 mm; Approx. Weight: 17kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-45