mazak int used for sale

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module -Manufacturer: Pepperl Fuchs, AS-Interface sensor/actuator module Ovp -Type: VAA-4EA-K3-ZE/E2 -Quantity: 1 module available -Cardboard dimensions: 100/70/H65 mm -Weight: 0.1 kg

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, pneumatic interface -Manufacturer: Siemens, Simatic S7 pneumatic interface orig -Type: 6ES7 148-1EH11-OXAO -Cardboard dimensions: 160/155/H60 mm -Weight: 0.5 kg

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, interface module -Manufacturer: Siemens Simatic S7 Profibus-DP ET 200S interface module ovp -Type: 6ES7 151-1BA01-OABO -Cardboard dimensions: 125/85/H65 mm -Weight: 0.2 kg

Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, pneumatic interface -Manufacturer: Siemens, Simatic S7 Pneumatic Interface -Type: 6ES7 148-1EH11-OXAO -Number: 3 modules available -Price: per piece -Dimensions: 150/145/H50 mm -Weight: 0.5 kg/pc.

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog module, analog module, analog output, interface module, communication processor -Manufacturer: Siemens Simatic S5 Serial Interface communications processor CP 521 SI -Type: 6ES5 521-8MA22 -Number: 3x module available -Price per piece -Dimensions: 110/45/H135 mm -Weight: 0.2 kg/pc.

Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, communication processor -Manufacturer: Siemens Simatic S5 Interface Module -Type: 6ES5 316-8MA12 -Number: 7 modules available -Price: per piece -Dimensions: 35/45/H140 mm -Weight: 0.1 kg/pc.

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog module, analog module, analog output, interface module, communication processor -Manufacturer: Siemens Simatic S5 Interface Module -Type: 6ES5 318-8MA12 -Number: 2x module available -Price per piece -Dimensions: 135/45/H140 mm -Weight: 0.4 kg/pc.

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, interface module -Manufacturer: Siemens Simatic S7 Profibus-DP ET 200S interface module -Type: 6ES7 151-1AA03-OABO -Number: 2x module available -Price per piece -Dimensions: 75/45/H120 mm -Weight: 0.1 kg/pc.

PLC control, expansion module, interface module, interface module, AS-Interface actuator module, AS-Interface sensor module, connection, electronic modules, electronic block, power module, DP master interface -Manufacturer: Siemens, Simatic DP master interface -Type: 6ES7 138-4HAOO-OABO -Number: 1x module available -Price per piece -Dimensions: 75/45/H1220 mm -Weight: 0.1 kg/pc.

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, interface module -Manufacturer: Siemens Simatic S7 Profibus-DP ET 200S interface module -Type: 6ES7 151-1AA02-OABO -Number: 2x module available -Price per piece -Dimensions: 75/45/H120 mm -Weight: 0.1 kg/pc.

Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter -Manufacturer: Lenze, frequency converter type 33-8213-E with Interbus S -Max. power: 2.2 kW -Input: 3/PE AC 400 V 11.0 A 50/60 Hz -Output: 3/AC 0-400 V 5.5 A 2.2 kW 0-480 Hz -Number: 5x inverters available -Price: per piece -Dimensions: 280/240/H85 mm -Weight: 3.1 kg/pc

Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, communication processor -Manufacturer: Siemens Simatic DP Interface Module IM151-1 ET200S -Terminal modules: Type 6ES7 151-1CA00-3BL0 6ES7 193-4DLOO-OAAO -Number: 2 modules available -Price: per piece -Dimensions: 170/120/H75 mm -Weight: 0.7 kg/pc.

Frequency converter, frequency converter, drive converter, controller, variable speed drive, converter, inverter -Manufacturer: Lenze, frequency converter type 33.8216-E with Interbus S -Max. Power: 5.5kW -Input: 3/PE AC 400V 27A 50/60Hz -Output: 3/AC 0-400V 13A 5.5KW 0-480Hz -Number: 1x converter available -Price per piece -Dimensions: 280/125/H230 mm -Weight: 5.3 kg/pc

Power converter, current transformer, controller, inverter, solar power converter -Manufacturer: SMA, Interface Retrofit Kit for Sunny Boy 2.1kV Inverter, Original Packaging -Type: 485PB-NR -Item No.: 3400100184 -Number: 40x interface available -Price: per piece -Cardboard dimensions: 290/200/H50 mm -Weight: 0.5 kg/pc.

High-performance grinding spindle, internal grinding machine, internal grinding device, internal grinding spindle -Grinding spindle: internal grinding spindle -Drive motor: BBC 1.5 kW / 2870 rpm -Spindle speed: approx. 9800 rpm -Shaft axis: adjustable max. height 460 mm -Recording/Dimensions: see photos -Total dimensions: 730/400/H535 mm -Weight: 105 kg

Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, communication processor, digital interface balancer -Manufacturer: Balance Systems Balancing Unit B6 from CNC machining center Santenberg GTC S 2 -Terminal modules: Type 9SHVM2510NL000 (2 pieces) -Dimensions: 300/275/H130 mm -Weight: 5.3 kg

Interface converter, converter module, FL Comserver, interface converter, interface converter, interface converter -Manufacturer: Phoenix Contact, Interface converter, original packaging -Type: PSM-EG-RS232/TTY-P/2K Ord.-No. 27 61 253 -Quantity: 1x Converter available -Cardboard dimensions: 120/90/H70 mm -Weight: 0.3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 32 mm -Dimensions: see photo technical drawing -Overall dimensions: 125/130/H70 mm -Total weight: 5.4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for power chucks, 4 sets -Dimensions: see photo technical drawing -Price/Fee: complete -Overall dimensions: 330/230/H105 mm -Total weight: 27.5 kg

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, nterface module -Manufacturer: Siemens Simatic DP, interface module -Type: 6ES7 151-1BA02-0AB0 -Number: 4x module available -Price per piece -Dimension: 120/45/H75 mm -Weight: 0.1 kg/pc.

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, interface module -Manufacturer: Siemens Simatic S7 Profibus-DP ET 200S interface module -Type: 6ES7 151-1AA01-0AB0 -Number: 2x module available -Price per piece -Dimensions: 120/40/H75 mm -Weight: 0.1 kg/pc.

Profibus single module, Profibus single module, for PLC control, fieldbus, PROFIBUS, Profibus-DP, AS-i Gateway -Manufacturer: ifm electronic, AS-Interface control cabinet module -Type: AC2251 -Voltage: 20...30 V DC / 200 mA see photo type plate -Number: 12x module available -Price per piece -Dimension: 100/90/H130 mm -Weight: 0.2 kg/pc.

Profibus single module, Profibus single module, for PLC control, fieldbus, PROFIBUS, Profibus-DP, AS-i Gateway -Manufacturer: ifm electronic, AS-Interface control cabinet module -Type: AC2251 -Voltage: 20 -30 V DC / 700 mA see photo type plate -Number: 20x module available -Price per piece -Dimension: 100/90/H130 mm -Weight: 0.2 kg/pc.

Control card, output card, control, memory module, PLC control, expansion module, interface module, analog module, analog module, analog output, interface module, communication processor -Manufacturer: Weidmüller, Interface Module -Type: RSSD 123436 -Quantity: 6x module available -Price per piece -Dimensions: 60/90/H75 mm -Weight: 0.1 kg/pc.

Screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw compressor, suction regulator relief valve, relief valve -Manufacturer: Boge, screw compressor intake regulator relief valve from compressor type SL 270 -Type: 644 0041 01 -Pressure: 0.5 - 10 bar bar -Dimensions: 195/100/H140 mm -Weight: 2.0 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 18 mm -Dimensions: see photo techn. drawing -Quantity: 2x set of interchangeable jaws available -Price: per set -Total dimensions: 61/72/H48 mm -Total weight: 1.0 kg/pc.

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 20 mm -Dimensions: see photo technical drawing -Quantity: 2 sets of interchangeable jaws available Price: per set -Overall dimensions: 70/60/H54 mm Total weight: 1.1 kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 16 mm -Dimensions: see photo technical. drawing -Quantity: 2x set of interchangeable jaws available -Price: per set -Total dimensions: 55/48/H40 mm -Total weight: 0.5 kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 14 mm -Dimensions: see photo technical. drawing -Quantity: 2 sets of interchangeable jaws available -Price: per set -Total dimensions: 48/42/H35 mm -Total weight: 0.3 kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 34 mm -Dimensions: see photo technical drawing -Overall dimensions: 130/136/H80 mm -Total weight: 7.0 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: rotating jaw set for four-jaw chucks, soft -Jaw width: 34 mm -Dimensions: see photo technical. drawing -Total dimensions: 140/140/H100 mm -Total weight: 8.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 18 mm -Quantity: 2 sets of interchangeable jaws available -Price: per set -Overall dimensions: 64/54/H46 mm Total weight: 0.8 kg/set

Ball valve, ball valve internal thread, metal ball valve -Manufacturer: GEMÜ, 2/2-way metal ball valve stainless steel, unused in original packaging -Type: B20 25D 137 SL Item No.: 88613078 -Size: DN25 1 -Pressure: PN63 63 bar -Hand lever: lockable -Quantity: 6x ball valve available -Price per piece -Dimensions of box: 195/120/H60 mm -Weight: 0.9 kg/pc.

Ball valve, ball valve internal thread, metal ball valve -Manufacturer: GEMÜ, 2/2-way metal ball valve stainless steel, unused in original packaging -Type: B20 20D 137 SL Item No.: 88613077 -Size: DN20 3/4 -Pressure: PN63 63 bar -Hand lever: lockable -Quantity: 7 pieces available -Price per piece -Dimensions of cardboard: 180/100/H50 mm -Weight: 0.6 kg/pc.

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Number: 1 set of interchangeable jaws available -Dimensions total: 78/78/H75 mm -Total weight: 2.5 kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Turning jaw set, 4-piece, hard -Jaw width: 24 mm -Dimensions: see photo techn. drawing -Quantity: 2 sets of interchangeable jaws available -Price: per set -Dimensions: 92/97/H67 mm / 90/100/H70 mm -Total weight: 2.9 kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotating jaw set -Jaw width: 21 mm -Dimensions: see photo technical. drawing -Quantity: 2 sets of interchangeable jaws available -Price: per set -Total dimensions: 76/85/H53 mm / 77/85/H51 mm -Total weight: 1.6 kg / 1.5 kg

PLC control, electronic module, interference filter, power supply line filter, ballast, line filter, power line filter, three-phase filter, three-phase line filter, filter module, line interference filter -Manufacturer: Sew Block, line filter interference filter -Type: NF 063-503 HLD 110-500/55 -Voltage: 3x 500/520V 50 - 60Hz -Dimensions: 250/85/H95 mm -Weight: 2.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 20 mm -Dimensions: see photo technical. drawing -Quantity: 3 sets of interchangeable jaws available -Price: per set -Total dimensions: 90/90/H70 mm / 87/90/H65 mm -Total weight: 2.7 kg/ 2.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 18 mm -Dimensions: see photo techn. drawing -Quantity: 1x set of interchangeable jaws available -Total dimensions: 61/72/H47 mm -Total weight: 0,9 kg/pc.

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 16 mm -Dimensions: see photo technical. drawing -Quantity: 1x set of interchangeable jaws available -Total dimensions: 52/49/H41 mm -Weight: 0.4kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotating jaw set -Jaw width: 21 mm -Dimensions: see photo technical. drawing -Quantity: 1 set of interchangeable jaws available -Total dimensions: 76/85/H60 mm -Total weight: 1.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 27 mm -Dimensions: see photo technical drawing -Number: 1 set of interchangeable jaws available -Price: per set -Dimensions total: 90/80/H65 mm -Total weight: 2.4 kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 100/65/H75 mm -Total weight: 2.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotating jaw set -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Quantity: 1 set of interchangeable jaws available -Total dimensions: 76/85/H60 mm -Total weight: 2,3 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set for four-jaw chucks, hard -Jaw width: 32 mm -Dimensions: see photo techn. drawing -Total dimensions: 140/130/H95 mm -Total weight: 7,8 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set for four-jaw chucks, hard -Jaw width: 32 mm -Dimensions: see photo techn. drawing -Total dimensions: 140/130/H190 mm -Total weight: 14 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 100/65/H60 mm -Total weight: 1,8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 95/70/H70 mm -Total weight: 2.7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 100/65/H65 mm -Total weight: 2.3 kg