mazak 400 used for sale

U-screw gauge with clock FEINMESSZEUGFABRIK SUHL 300 - 400 mm TGL 15046/I in wooden box Measuring screw with 100 graduation ! used, tested ! Dimensions: 645 x 470 x 55 mm

U-measuring screw FEINMESSZEUGFABRIK SUHL KEILPART SUHL 300 - 400 mm DIN 863/I in wooden box used, tested ! Dimensions: 620 x 375 x 60 mm

Face plate PAGUS outer Ø: 400 mm bolt circle Ø : 135 mm bore Ø: 100 mm jaw height: 100 mm used, tested ! Dimensions: 400 x 400 x 210 mm

Clamping angle, angle table PAGUS Clamping surface: 650 x 400 mm groove width: T 18 / 32 mm and 30 x 30 mm (central groove) bore Ø 30 mm used, tested ! Heavy version Dimensions: 650 x 400 x 410 mm

Clamping plate, clamping table PAGUS Working area: 394 x 204 mm Plate thickness: 30 mm groove width: 10 / 17 mm used, tested ! Dimensions: 394 x 400 x 205 mm

Pneumatic Cylinder PARKER CJ-2ARS33MC ND 21405-02 Series 2A stroke: 100 mm rod diameter: Ø 45 mm New ! Dimensions: 500 x 220 x 165 mm

Pneumatic cylinder PAGUS stroke: 400 mm rod diameter: Ø 20 mm with end position sensor ! New ! Dimensions: 710 x 95 x 70 mm

Energy chain CABLE TRAIL M0950 Length: 4000 mm Width: 250 mm Height: 85 mm Dimensions: (rolled) 900 x 900 x 300 mm

Submersible pump, coolant pump BRINKMANN TA 400/440-X immersion depth: 440 mm Pump base: Ø 140 mm Pump flange: Ø 180 mm Q = 380 l/min H = 2 m motor: 0.0.07 mm 85 kW 220 / 380 V Dimensions: 680 x 200 x 190 mm

Control cabinet PAGUS 2 doors stainless steel control cabinet Dimensions: 800 x 400 x 1975

Pressure gauge set MANOMETERWERK KARL-MARX-STADT Pressure gauge set 60 0 - 40 MPa (0 - 400 bar) TGL 8701 Housing diameter: Ø 60 mm Pressure gauge set (2 pieces) ! New ! Dimensions (single pressure gauge): 60 x 60 x 65 mm

Scooter ITOH DENKI Power Moller PM570AS-15-400-3-380 Diameter: Ø 66 mm Length: 400 mm New ! Dimensions: 460 x 80 x 80 mm

Pressure gauge GAUGE PLANT BEIERFELD 1/BSi20/2 0 - 40 MPa (0 - 400 bar) TGL16374 Accuracy class: 1 Housing diameter: Ø 160 mm Connection thread: M20 x 1.5 New !' Dimensions: 200 x 160 x 55 mm

Scooter ITOH DENKI Power Moller PM 570 AS - 15 - 400 - 3 - 380 - UR 700 B - 0S Diameter: Ø 70 mm Length: 400 mm New ! Dimensions: 470 x 80 x 80 mm

Refrigeration unit THERMOTEK Type: P705-14974-1-U Cooling capacity: 400W max 18.5 bar Pump: 5 l/min 3 bar 0.5 kW 230 V New ! Dimensions: 580 x 420 x 240 mm

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Test Plate, Spotting Plate PAGUS 500 x 400 mm Height: 90 mm Dimensions: 700 x 410 x 90 mm

Welding Machine VEM, SCHRÖDER Welding Rectifier: RGSa 315.1 Wire Feeder: DVG 400 electronic Year: 1977 / 2001 50 - 315 A 220 / 380 V used, tested ! Dimensions: 800 x 600 x 1400 mm

Face Plate STANKO 7103-0049 Outer Ø: 400 mm Bolt Circle Ø : 135 mm Bore Ø: 100 mm New ! preserved ! Dimensions: 400 x 400 x 165 mm

Punching PAGUS punching punching force approx. 4000 kg installation height approx. 200 mm projection: approx. 380 mm table 300 x 300 mm 380 V used, tested ! Dimensions: 1000 x 920 x 1550 mm

Welding table, leveling table, straightening plate, work table, clamping table leveling plate, leveling table,spotting plate PAGUS work surface: 500 x 400 mm height: 70 mm used, tested ! Dimensions: 500 x 400 x 70 mm

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Straightening Plate, Spotting Plate PAGUS Work surface: 630 x 400 mm Height: 130 mm used ! Dimensions: 630 x 400 x 130 mm

Welding table, straightening table, straightening pad, work table, clamping table marking plate, spotting plate, levelling plate PAGUS work surface: 490 x 400 mm height: 84 mm Dimensions: 490 x 400 x 84 mm

Face plate PAGUS Outer Ø: 400 mm Bolt circle: 135 mm Bore Ø: 100 mm Height with jaws: 140 mm Flange: 175 mm Overall height: 190 mm Short cone used, tested ! Dimensions: 400 x 200 mm

Saw blade for metal circular saw, segment saw blade WMW, HOHENSTEIN 54060 Ø 400 mm 96 teeth width: 4.0 mm bore: 50 mm bolt circle of the 4 driver holes: 80 / 85 mm spare part e.g. for Hohenstein RBT400 ! suitable gearbox G84 !' used, tested ! Dimensions: 420 x 420 x 10 mm ,

Good day We hereby offer you a used sliding belt conveyor belt, type ITE/P50, from the manufacturer Schunk Fördertechnik GmbH, built in 2003. The centre distance is 2300 mm, the belt width 790 mm. The drive is provided by a geared motor with drive chain. Machine documentation is no longer available. We would be pleased if this conveyor belt is interesting for you. Your service team Mertens & Frowein GmbH

Bitzer semi-hermetic compressor 4FES-3Y-40S 400V Condition: unused Displacement (1450 RPM 50Hz) 18.05 m3/h Displacement (1750 RPM 60Hz) 21.78 m3/h Well. of cylinder x bore x stroke 4 x 41 mm x 39.3 mm Weight 90 kg Max. pressure (LP/HP) 19 / 32bar Connection suction line 22 mm - 7/8'' Connection discharge line 16 mm - 5/8'' Oil type R134a/R407C/R404A/R507A/R407A/R407F BSE32(Standard) | R134a tc>70°C: BSE55 (Option) Oil type R22 (R12/R502) B5.2 (Option) Oil type R1234yf BSE32 (Standard) | R1234yf tc>70°C : BSE55 (Option) Oil type R1234ze BSE55 (Standard) | to>15°C: BSE85K (Option) | tc>70°C: BSE85K (Option) Ölfüllung R454C/R455A BSE32 (Standard) 1pc in stock

Batch ball mill made in Germany with a gross volume of 400 l., drive via V-belt and gear motor with 2.2 kW, iron-free lining (aluminium oxide), previous use: glaze production in the wet grinding process. Cleaned, repainted and restored. Available for an extra charge: iron-free grinding media (balls, alubit).

Several transformers for sale: Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available

Several transformers for sale: Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available

FIMIC RAS+REF 400 FULLY AUTOMATIC SCREENCHANGER, screening area 1.206cm², for PP / LDPE / LLDPE / HDPE / PS / EPS / ABS / PVB, possible setting as : continuous scraping OR scraping on an Amp.threshold OR backflush, it was mounted on extruder producing 800 kg/h with 100-150 my screening, Always used as RAS (REF equipment brand new), 30 kw drive, totally checked in 2024 by constructor, Immediately available, remote connection (Industry 4.0) with pressure control system from pulpit, 4-5 spare laser filters available, multipolar plug connectors, We can supply spare screens for this machine., Laser screen from 80 to 300 µ - Mesh from 180 to 50, Punched screen from 400 to 2.000 µ - Mesh from 40 to 10, ---------------------------------------------------------------------- -----------------, SEE ALSO OUR[OTHER FIMIC SCREENCHANGER](.germanplast/listings?q=GEMA100), installed power - used power ...

AUTOMATIC SCREENCHANGER, number of screens: 2, total filter area: 1.342 cm2 cleaned by 6 scrapers, for the separation of soft contaminants such as paper, wood, aluminium, copper, foreign polymers, etc. from contaminated plastic melt., For rigid and soft PP max 30 MFI gr/10, 1.400 kg/h max moisture 3%, screening at 250 my., Scraper disc and scraper ensure remarkable efficiency thanks to their innovative geometry and the directly connected discharge channels. Contaminants are lifted from the screen immediately and forwarded to the coaxial discharge screw. The contaminants are removed under control and with a minimum of melt via this optimised discharge system., The scraper and discharge screw speeds are controlled fully automatically., - fast removal of contaminants through self-cleaning filter system with rotating scraper for screen cleaning, - high separation capacity and lowest melt los ...

UNDERWATER PELLETIZER, for rigid and soft PP max MFI : 30 (and more), electrical heater max 14,6 kW, n.2 thermo regulating zones, A pressure transducer and a melt temperature transducer are mounted on the purge valve. The purge valve is controlled by a hydraulic cylinder connected to a hydraulic power unit with a 2.2 kW motor., Steel die with brazed tungsten carbide plates. A conveyor cone for the molten polymer is installed inside., stainless steel granulation chamber, Impeller shaft with 11 kW 2-pole drive motor (3000 rpm nominal, 4000 rpm max) controlled by an inverter with rpm variation and speed readout on the panel. The shaft output side has special seals and a labyrinth and safety water drainage to protect the motor bearings. The impeller motor is integral with a slide sliding on rolling guides, operated, via a recirculating ball screw, by a manual handwheel equipped with a positi ...

- Producer Cefla - Type RIB / 4000 - Year of construction 2003 - Max. part width 1300 mm - Max. part length 3.800 mm - Max. part height ~ 10 - 60 mm - Abstand der Rechen, Höhe 135 mm - Vorschubgeschwindigkeit 2 - 7,5 m/min - Length 4.100 mm - Width 1.700 mm - Height 1.800 mm - Inkl. Control - Location: on stock - Volt / HZ 400 / 50

Vacuum extrusion press 'UNIVERSA' PZG 40-40a with 400 mm Ø and 18.5 kW drive (expandable up to 55 kW). Maximum pressing pressure: 30 bar. Extruder incl. PZSVG 35a pre-press with 15 kW drive. Includes base frame with motor clamping device. In regularly serviced condition; last revision in 2022. Previous use: Production of ceramic roof tiles. Available for an extra charge: vacuum generator and various mouthpieces.

Leutenegger (Starrag) Wash Box Technical data Bathroom capacity: approx. 0.9 m3 Chemistry: Henkel P 3 Voltage: 3x400V/230V 50 Hz Supply line: 40 A Control voltage: 24 V DC Temperature max: 50° C Electric heating Heating capacity: 3x3.25 kW = 9.75 kW Work pump: 3 kW Exhaust fan: 0.37 kW Exhaust air volume: 400 m3/h Data sheet at this link Shipping costs on request More items - new and used - can be found in our shop! International shipping costs on request

Equipment: Agitator,Condition: used,Volume: 40,000,Design: horizontal,Base: feet,Number of feet: 6,Diameter outside: 3,000,Cylindrical length: 5700,Total height: 4,500,Total length: 6,300,Nameplate: No,Equipment: Ventilation/venting, spray head, crane eyelets,Outlet: pipe end approx. 65mm,Last use: Foodstuffs,Surface outside: marbled,Material in contact with the product: V2A 1.4301 (AISI304),Manufacturer agitator: Stelzer,Power: 1.1 / 4,Speed: 480 / 980,Agitator: Propeller,Voltage: 380,Bottom bearing: No,Current interferer: No,Agitator arrangement: on the container,Manufacturer agitator:

Equipment: Agitator,Manufacturer: Möschle Behälterbau,Condition: used,Volume: 40,000,Specific gravity of the medium: 1.35,Bottoms: clapper bottom,Design: upright,Stand shape: feet,Number of feet: 5,Diameter outside: 2,800,Cylindrical height: 5,750,Total height: 7,490,Technical documents: Drawing,Manhole / dome: in cylinder (approx. 340 x 440 mm),Type plate: Yes,Equipment: Spray head, crane eyelets,Outlet: available,Outlet : 65,last purpose: foodstuffs,Manufacturer agitator: DENK Mixing Technology,Power: 1.8 / 8.4,Speed: 470 / 960,Agitator: Propeller,Voltage: 400,Bottom Bearing:

Equipment: Insulation, Agitator,Manufacturer: Alfa Laval,Condition: used,Volume: 40,000,Design: upright,Standing form: Standing frame,Insulation: available,Insulating jacket: hermetically welded,Insulation material: Cork,Material insulating jacket: Stainless steel,Diameter outside: 3,050,Cylindrical height: 6,000,Total height: 8,300,Wall thickness underbody: 3,Wall thickness cylinder: 2.5,Wall thickness upper floor: 4.5,Manhole / dome: in cylinder,Type plate: Yes,Equipment: Ventilation/ventilation, crane eyelets, Spout: available,Spout : 100,Remarks: Stand frame reinforced with concrete (see pictures),last use:

Scissor lift table, scissor lift table, scissor lift table, scissor lift, scissor lift, double scissor lift table -Drive for lifting via: 240 volt electric hydraulic pump -Payload: 400 kg -Platform: 700 x 600 mm -Height retracted: 330 mm (without wheels 210 mm) -Height extended: 1140 mm -Max. Stroke: 810 mm -Number: 1x lifting platforms available -Price: per piece -Transport dimensions: 800/600/H330 mm -Own weight: 128 kg

Adjustable geared motor, variable speed geared motor, electric motor -Manufacturer of gearbox: AEG Motor manufacturer: AEG -Motor power: 0.175 kW -Speed range: 450-4000 rpm -Motor: adjustable -Design: B3 -height of shaft axis: 80 mm -Drive shaft: Ø 14 mm -Quantity: 1 motor available Price: per piece -Dimensions: 380/200/H240 mm -Weight: 22 kg

Stacking boxes, stacking boxes, plastic boxes, euro stacking boxes, transport basket, stacking basket, euro stacking containers, euro stacking containers, small load carriers -External dimensions: 400/300/H220 mm -Interior dimensions: 340/268/H200 mm -Quantity: 144 pieces of boxes available -Piece: 6 euros net from stock -Minimum order quantity: 5 pcs -for larger purchases: price on request -Own weight: 1.5 kg/piece

Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Manufacturer: Forbo Siegling, Conveyor belt type E 18/3 EO/E3 MT-TT TRANSPARENT -Width: 600 mm -Length: 2500 mm -Quantity: 1 conveyor belt available -Dimensions: 400/350/H235 mm -Weight: 2.9 kg

Welding inverter, welding rectifier, electrode welding machine, electrode welding machine, electrode welding rectifier, welding machine, welding inverter -Manufacturer: Kjellberg, Electrode welding machine welding inverter type KU 412 -Welding power: max. 400 A -Welding cable with electrode clamp -ground cable -Dimensions: 560/290/H500 mm -Weight: 44 kg

Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: steel, crane chassis with electric cable pull -Crane chassis: Type GO 24 20 16 -Traveling speed: 20 m/min -Roller pitch: 800mm -Cable: Type AS 2010 -Traction: 1000 kg / load capacity 4000 kg -Drum speed: 16 m/min / stroke 4 m/min -Lifting height: mm -Transport dimension: 1250/1180/H400 mm -Own weight: 356 kg

Gear motor, electric motor, electric gear motor -Manufacturer: Groschopp, geared motor -Gearbox: Type E 2 ai= 7 -Speed speed: approx. 400 rpm -Motor: Type WK 0341501 0.12 kW / 2800 rpm -Shaft: Ø 10 x 30 mm -Protection rating: IP44 -Total dimensions: 225/150/H115 mm -Weight: 4.4 kg

Container, grit trap, storage container, transport storage container, storage tank, transport container, settling tank for groundwater lowering -Container: Transport storage container -Capacity: 4000 liters -Inner dimensions: 2990/990/H1000 mm -Connections: see photos -Dimensions total: 3570/1150/H1150 mm -Weight: 780 kg

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor, Spindle Motor, Permanent Magnet Three-Phase Servo Motor, AC Spindle Motor -Manufacturer: Reliance Electric, servo motor -Type: H-4050-P-HOOAA -Power: 1.86 kW -Speed: 4000 rpm -Frequency: 0-200 Hz -Technical data: see photo type plate -Shaft: Ø 19 x 50 mm -Number: 4 motors available -Price: per piece -Dimensions: 315/120/H145 mm -Weight: 9.2 kg/piece

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, transformer, auto-transformer -Manufacturer: OCE Montecchio, Auto-Transformer Type CEI 14-6 -Power: 400 VA -Technical data: see photo type plate -Dimensions: 120/110/H125 mm -Weight: 5.8 kg

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: TGL, Manometer 0 - 400 bar, unused, original packaging -Type: Ø 160 mm 0-40 MPa -Quantity: 1x pressure gauge available -Cardboard dimensions: 200/200/H90 mm -Weight: 1.0 kg