mazak 12 used for sale

Lifting kneader Diosna S 120 Plus Stainless steel kettle and kneading arm 2 gears, 1 timer Connection 400V, 16A-CEE plug Used machine

Manufacturer: LEU Type: LK-70-H-120-T Year of Manufacture: 2013 Power Supply: 3 x 400 V AC, 50 Hz Fusing: 16 A, RCD 30 mA time-delayed Certification: CE Find more here - / Contact us at -

Rico 2 Head Packer for 2 x 6 Wine Box 2 x 6 Box

Key data: 1100 KW, 1375 kVA, 10500 V

Weshai Baudouin Gas Generator New 1 MW skid-mounted gas generator, including cooling and exhaust systems. 50 Hz/10500 V. These generators have proven themselves in Ukraine. Price listed is FOB China. Factory warranty, CE certification, and customization options available to suit any project. WhatsApp +38 050 323 99 22

bore capacity in steel (diameter): 50 mm arm length: 1250 mm workpiece height max.: mm total power requirement: 4 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1270 mm plate thickness: max. 4,5 mm : 4 mm roll diameter: 120 mm roll speed: 8 U/min min. bending diameter: 180 mm total power requirement: 2,2 kW weight of the machine ca.: 1250 kg dimensions: 2470 x 750 x 1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pharma Technology PTGV 1200 CE N ECE capsule deduster/polisher with Ceia THS/PH21N metal detector, empty capsule eliminator to remove any empty, broken or opened capsules and venturi vacuum transport, suitable for capsule sizes 000 / 00E / 00 / 0E / 0 / 1 / 2 / 3 / 4 / 5, capacity from 220.000 capsules/h (size 00) up to 500.000 capsules/h (size 4), height product inlet 864 +/- 10 mm, height product outlet 1023 +/- 20 mm, machine floor space approx. 1289 x 615 mm (W+D), machine height approx. 1788 mm, electrics 230 V AC – 50/60 Hz

Compressor FETTE to renovate, Sold with:, 1 turret turret-change cart, 1 control console unit faulty (the control part must be renovated), 2 turrets:, - 1 turret with 20 stations (EU1 -441 G 10), Tablet output: min 30 000 / max: 120 000, Maximum tablet diameter: 25 mm, Rotation speed: 25 - 100 min 1, Matrix diameter: 38.1 mm, Matrix height: 23.8 mm, - 1 turret of 30 stations (EU 19 H 11), Tablet output: min 45 000 / max: 216 000, Maximum tablet diameter:13 mm, Rotation speed: 25 - 120 min 1, Die Ø: 24 mm, Matrix height : 22.22 mm, Elec: 400 V / 17 A / 50 Hz , Precompression (kN): 50, Compression (kN): 80, Maximum tablet dimensions (mm): 13 / 25 mm, Upper punch diving depth: 1-5 mm

DOUBLE SHAFT PADDLE MIXER, NAWI (1200 LT) Technical description: Capacity: 1.200 lt Power supply: 380-440 V / 50-60Hz Bowl dimensions: 1160 x 1230 x 900 mm Dimensions: 2400 x 1650 x 2350 mm

pressure: 125 t chamfer lenght: 3550 mm distance between columns: 3050 mm stroke: 250 mm table width: 120 mm table height: 900 mm column arm: 320 mm return speed: 100 mm/sec working feed: 10 mm/sec control: Cybelec DNC 70 quantity of oil: ca. 250 l total power requirement: 11 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 4 x 2 x 3 m new control Cybelec CypTouch 12 - 3 axes Hydraulic tool clamp Crowning Swivel control, right front free-moving foot control lateral protective device (protective grille) rear protective device (protective grille) Machine is available in about 1-2 months The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

engine: 0,18 kW band length: 4.500 mm band width: 120 mm Infeed conveyor belt, outfeed conveyor belt or connecting conveyor belt Weinig LTB 120/4500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralCNC Turning Centre; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways710 mmTransverse stroke260 mmLongitudinal stroke1345 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmSpindle diametre on front bearing140 mmMain drive 1Drive power (100% DC)22 kWSpeed range- 4000 rpmTorque (100% DC)410 NmMax. torque (40% DC)525 NmAccuracy at point stopping0,001 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (100% DC)10 kWFloor space/WeightDimensions (L x W x H)5,4 x 2,07 x 2,6 mWeight approx.7800 KgTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)Chuck rinsing device, outsidechuck rinsing device, outside (main spindle)Main s ...

A GSW decoiler is available. Load capacity: 3000kg, strip width: 650mm, max. strip cross-section: 107.5mm/0.35mm, machine dimensions Y/Z: approx. 1150mm/2000mm. An on-site inspection is possible.

A Trumpf punching machine still in operation, including a Trumalift loading and unloading unit that has not been used for a longer period, is available. 1) CNC punching machine Trumpf TruMatic 500, year of manufacture: 1993, max. punching force: 220kN, max. sheet thickness: 6.4mm, max. workpiece weight: 150kg, max. punching diameter: 76.2mm, simultaneous motion: 108m/min, stroke rate: 900/min, machine dimensions X/Y/Z: approx. 6700mm/5800mm/2200mm, weight: approx. 11000kg. 2) Trumpf Trumalift SheetMaster 1250 loading and unloading system, year of manufacture: 1993, max. sheet dimensions X/Y: 2500mm/1250mm, max. sheet thickness: approx. 8mm. Documentation available. An on-site inspection is possible.

FANUC M-710iC/12L robotic welding station was built in 2014 in Japan by Fanuc Corporation. All components of the welding station are brand new. It has never been in operation after purchase. The FANUC M-710iC/12L is a state-of-the-art welding system designed for automated arc welding of structural components with even the most complex geometries. The machining process is performed by a FANUC 6-axis robot, distinguished by, among others, its clever design and robust arm with a large range of movement. The arm’s reach of 3323 mm and a payload of 12 kg enable the welding of complex workpieces, while maintaining a highly dynamic and repeatable process. Directly on the machine body, a reliable LINCOLN ELECTRIC wire feeder is placed, which ensures dynamic and accurate feeding of the welding wire. The welding torch, in turn, is automatically cleaned at predetermined intervals by the ABICOR ...

Control Siemens 828D Travel X/Y/Z: 1100 x 610 x 610 mm Table size: 1250 x 610 mm Spindle speed: 12,000 min-1 Tool magazine for 30 Wkz., SK 40 Cooling by the spindle 3D Probes

BECKMAN COULTER Allegra X-12R Refrigerated Centrifuge with SX4750A Rotor Reference : X-12R Max. Centrifuge Speed: 10200 RPM Capacity: 4 x 750mL (4L) Refrigerated = -10°C to 40°C Max. FCR: 11400 x G Voltage: 230V / 50/60Hz Net Weight: 121kg Autonomy: 9h. 59 min. or continuous Dimensions: 77 × 63 × 36 cm BECKMAN SX4750A Oscillating Bucket Rotor 4 x 750ml carrycots with lids Max. Speed: 4750 rpm Max. FCR: 5250 x G 1 set of 4 349946 adapters for 62 mm diameter polypropylene bottle (Designed for a 250 ml flat bottom bottle) 1 set of 2 adapters 349950 for 14 tubes of 15ml 1 set of 4 multi-well plate holders Year of Manufacture: 2009

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : DECKEL MAHO CNC Universal Milling Machine model DMU 50 M year 1998 Working range: Longitudinal stroke X Axis 500 mm Vertical stroke Z Axis 400 mm Cross stroke Y Axis 400 mm C-axis – table turning, manual 360 ° B-axis – table swivelling, manual + 95 / - 10 ° Table area Ø 700 x 500 mm Inclination range of table (manually) +95 / -10 ° Rotation of table (manually) 360 ° Max. Table load approx. 200 kg Maximum distance table – spindle nose 550 mm horizontal distance machine – spindle nose 210 – 610 mm Tool holder Taper ISO 40 Spindle speeds 20 – 4,500 rpm Fee ...

General SKU230N087 MakeReko Industrial Equipment BV TypeInternally-fed drum screen TI-S 1200/1400 No.TZX0006/0001/S Year of construction2008 LocationBarneveld Main Features MaterialStainless steel Motor1.5 KW Length4000 mm Specified Features - Rotating sieve MaterialStainless steel Rotating sieveRotating drum sieve Sieve sizesdia. 1200x4000mm Motor1,5 KW, 230/400 Volt Sieve perforation3 and 4mm Information Floor space5,0x1,6 M Total height2,5 M Weight2000 KG Extra SpecificationsINTERNALLY FED DRUM SCREEN Separation of solids from waste and process water by means of an internally fed rotating perforated drum strainer. Rotating sievesRekoSieves > Rotating sievesBrand > Reko What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine ...

sheet width: 1250 mm plate thickness: 1,5 mm distance between columns: 1300 mm daylight opening: 80 mm : 155 ° total power requirement: Handbetrieben weight of the machine ca.: 0,18 t dimensions of the machine ca.: 1,4 x 0,8 x 1,3 m Segment-bending machine Segment widths: 2x50mm,1x70mm,2x75mm, 2x100mm,4x150mm, 1x170m. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Homogenizing Mixer with Powderjet Manufacturer: Becomix Type RW 125 CD The machine went into operation in December 2007, built in 2006, very good condition, only ran in the laboratory Content usable volume 125 l, pharmaceutical version Product room vacuum and pressure-resistant -1/+2 bar, operating temperature 133 °C Boiler room pressure-resistant 4 bar, operating temperature 165 °C Scraper agitator, homogenizer with gap adjustment (Powderjet), water-cooled motor Becomix consisting of: 1x RW 125 CD Homogenizer including Cip/SIP 1x energy frame with all valves, vacuum pump, steam-heated 1x control cabinet with S 7 control and control panel with Promas CS 1x control cabinet with frequency converters Documents: technical documentation French, Promas manual, various CD ́s Documents with FAT, IQ, OQ

Homogenizing Mixer with Powderjet Manufacturer: Becomix Type RW 125 CD The machine went into operation in December 2007, built in 2006, very good condition, only ran in the laboratory Content usable volume 125 l, pharmaceutical version Product room vacuum and pressure-resistant -1/+2 bar, operating temperature 133 °C Boiler room pressure-resistant 4 bar, operating temperature 165 °C Scraper agitator, homogenizer with gap adjustment (Powderjet), water-cooled motor Becomix consisting of: 1x RW 125 CD Homogenizer including Cip/SIP 1x energy frame with all valves, vacuum pump, steam-heated 1x control cabinet with S 7 control and control panel with Promas CS 1x control cabinet with frequency converters Documents: technical documentation French, Promas manual, various CD ́s Documents with FAT, IQ, OQ

Range : ø 10-40 mm plain pipe; or 40-110 mm corrugated pipe, 20 m/min max. Remark : ID 450-600mm; OD 1200mm Max Width 100-400mm

·, - Weight: approx. 35.0 t, · Setup time: about 0.5 h, · Max. task piece size: about 800 mm, · Inlet opening: 1,200 × 700 mm, Throughput: dependent on the material, · Year of construction: 2012, · Operating hours: approx. 8,000 h

Machine name: Combined heat and power plant used Manufacturer: SEnergie GmbH Type: G6.12TI Year of Make: 2008 Generator: NEWAGE STAMFORD Generator Type: UC. I274D2 Generator kW: 100 kW Fuel Type: Sewage Gas Electrical power: 80 kW Thermal power: 123 kW Efficiency: 88.9% Dimensions: L 3,500 x W 1,100 x H 2,500 mm Curb weight: 3,000 kg Tech. Documentation: Yes Note: In 2018, a new engine was installed and the generator was rewound. Last service 15.10.2021 at 86,102 h Accessories: A control cabinet Condition: Used Price: On request

A relatively new double-girder overhead crane Konecranes is available. Load capacity: 12t. Documentation available. An on-site inspection is possible.

LEAK TEST MACHINE LTM72 FACTORY: M2 & M9 QUANTITY: 2 UNIT CONDITION: LEAKING & NOT FUNCTIONING, CAN TAKE THE PART AS SPARE PART CONTACT NUMBER: ZULAIKA 0129037331

Table shear cutting blade, replacement blades for table shears, replacement cutting edges, cutting blades, shear blades -Cutting blade: Replacement blade for guillotine shears -Cutting length: 1290 mm -Hole spacing: 240 mm / Ø13 mm see photos -Quantity: 8x replacement blades available -Price: per piece -Dimensions: 1290/15/H70 mm -Weight: 10.3 kg/pc.

An industrial large-format welding rectifier ESAB is available. Rated current: 1250A, welding voltage: 44V, power factor: 0.92, weight: approx. 490kg. An on-site inspection is possible.

Spiral mixer Diosna SP 120 D Capacity in dough: 120 Kg  Performance in flour: 75kg  Automatic timer Two timers Two speed settings Reverse Mobile with brake

Spiral mixer Diosna SP 120 F Capacity in dough: 120 Kg  Performance in flour: 75kg  Automatic timer Digital Control CS03 Two speed settings Reverse Mobile with brake

Spiral mixer Diosna SP 120 D Capacity in dough: 120 Kg  Performance in flour: 75kg  Automatic timer Two timers Two speed settings Reverse Mobile with brake

Deck Oven Miwe Condo CO 4.1208 Electric Year of Make: 2016 Condition: functional 4 shelves each W120 x D80 x H16 cm Each floor can be controlled separately Top and bottom heat can be controlled separately Each floor with separate steam function With steam condenser and exhaust hood Power: 37.6 kW (9.4 kW per stove) With proofing chamber for 10 baking trays 60x80 cm 

Lifting kneader Diosna S 120 Plus Capacity in dough: 120 kg Flour capacity: 75 kg Boiler capacity:Â 180 liters Automatic timer with two clocks Two speed settings

Deck Oven Miwe Condo CO 5.1208 Electric Year of Make: 2016 Condition: functional 5 shelves each W120 x D80 x H16 cm Each floor can be controlled separately Top and bottom heat can be controlled separately Each floor with separate steam function With steam condenser and exhaust hood Power: 46.9 kW External dimensions WxDxH: approx. 150 x 180 x 215 cm

Lifting kneader Diosna S 120 Plus Capacity in dough: 120 kg Flour capacity: 75 kg Boiler capacity:Â 180 liters Automatic timer with two clocks Two speed settings

Spiral mixer Diosna SP 120 D Capacity in dough: 120 Kg  Performance in flour: 75kg  Automatic timer Two timers Two speed settings Reverse Mobile with brake

Spiral mixer Diosna SP 120 D Capacity in dough: 120 Kg  Performance in flour: 75kg  Automatic timer Two timers Two speed settings Reverse Mobile with brake

Spiral mixer Diosna SP 120 D Capacity in dough: 120 Kg  Performance in flour: 75kg  Automatic timer Two timers Two speed settings Reverse Mobile with brake

Lifting kneader Diosna S 120 Plus Capacity in dough: 120 kg Flour capacity: 75 kg Boiler capacity:Â 180 liters Automatic timer with two clocks Two speed settings

Spiral mixer Diosna SP 120 D Capacity in dough: 120 Kg  Performance in flour: 75kg  Automatic timer Two timers Two speed settings Reverse Mobile with brake

Lifting kneader Diosna S 120 Capacity in dough: 120 kg Flour capacity: 75 kg Boiler capacity:Â 180 liters Automatic timer with two clocks Two speed settings

Extendable spiral mixer Diosna SPV 120 AD Capacity in dough: 120 kg Flour capacity: 75 kg Tub capacity: 180 l Tub diameter:Â 750 mm Tub height from the floor: 809 mm Automatic timer with 2 clocks Two speed settings Protective cover with safety switch Pliers lock Friction wheel drive Mobile with brake Incl. 2 vat wagons

Spiral mixer Diosna SP 120 D Capacity in dough: 120 Kg  Performance in flour: 75kg  Automatic timer Two timers Two speed settings Reverse Mobile with brake

Extendable spiral mixer Diosna SP 120 AD Capacity in dough: 120 kg Flour capacity: 75 kg Tub capacity: 180 l Tub diameter:Â 750 mm Tub height from the floor: 809 mm Automatic timer with 2 clocks Two speed settings Protective cover with safety switch Pliers lock Friction wheel drive Mobile with brake Incl. 2 vat wagons

Spiral mixer Diosna SP 120 D Capacity in dough: 120 Kg  Performance in flour: 75kg  Automatic timer Two timers Two speed settings Reverse Mobile with brake

Lifting kneader Diosna S 120 Capacity in dough: 120 kg Flour capacity: 75 kg Boiler capacity:Â 180 liters Automatic timer with two clocks Two speed settings

Extendable spiral mixer Diosna SPV 120 AD Capacity in dough: 120 kg Flour capacity: 75 kg Tub capacity: 180 l Tub diameter:Â 750 mm Tub height from the floor: 809 mm Automatic timer with 2 clocks Two speed settings Protective cover with safety switch Pliers lock Gear drive Mobile with brake Incl. 2 vat wagons

Lifting kneader Diosna S 120 Plus Capacity in dough: 120 kg Flour capacity: 75 kg Boiler capacity:Â 180 liters Automatic timer with two clocks Two speed settings