133,560 used machines on RESALE, but how to find them? Machine Search
MOTOR DEFECTIVE (STUCK) Auction-ID: A3-46155-10005
Compette linear unit, dismantled, max. stroke 900/1220mm, , used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was purchased from a company as part of a machine disassembly and is in very good condition. The photos show the linear unit mounted on a swivelling blasting table. One unit has the motor on the left, the 2nd unit has the motor on the right. The parts have already been dismantled! Complete linear unit with the following scope of delivery: - Electric motor Siemens, 1LA7096-4AA11, 1.5 KW, 1420/min, - Zimm lifting gear I=6:1, 24mm stroke/sec. - Max. stroke without carriage only with threaded nut 1220mm, - Max. stroke with slide approx. 900mm - Trapezoidal threaded spindle 1270mm, with bellows, D35mm, 6mm pitch, - Bearing block for spindle with mounting bracket - Bronze threaded nut with lu ...
AUTOMATIC SCREENCHANGER, number of screens: 2, total filter area: 1.342 cm2 cleaned by 6 scrapers, for the separation of soft contaminants such as paper, wood, aluminium, copper, foreign polymers, etc. from contaminated plastic melt., For rigid and soft PP max 30 MFI gr/10, 1.400 kg/h max moisture 3%, screening at 250 my., Scraper disc and scraper ensure remarkable efficiency thanks to their innovative geometry and the directly connected discharge channels. Contaminants are lifted from the screen immediately and forwarded to the coaxial discharge screw. The contaminants are removed under control and with a minimum of melt via this optimised discharge system., The scraper and discharge screw speeds are controlled fully automatically., - fast removal of contaminants through self-cleaning filter system with rotating scraper for screen cleaning, - high separation capacity and lowest melt los ...
Consisting of 8 air cushions 69 x 69 cm Control panel 9 Hoses The system has only been used a few times and is in mint condition.
Unused in the original packaging Auction-ID: A1-40397-199
including various flask clamps, tube racks and accessories. Auction-ID: A1-49790-1494
Machine is fully functional Auction-ID: A3-46152-5320
Model: MAXX20 Date of manufacture: 20/10/2015 Power supply: 230 V Power: 1800 W Amperage: 7.5 A Frequency: 50/60 Hz Conformities Indicated: CE, RoHS, UL Controls: Digital display with temperature and time adjustment Pressure: manually adjustable Operation: Manual closing with automatic timer Accessory/visible document: Heat Press Caddie documentation, mobile stand compatible with several Hotronix presses. User manual present. Auction-ID: A3-46152-35850
General Description Professional wet and dry industrial vacuum cleaner manufactured by Ghibli , model Nevada MAX . Designed for vacuuming dust, dirt and liquids in workshops, production facilities, construction sites, car washes and professional cleaning applications. Technical Details Manufacturer: Ghibli Model: Nevada MAX Machine type: Wet & dry industrial vacuum cleaner 3 independently switchable vacuum motors Large stainless-steel collection tank Wet and dry vacuuming capability Long suction hose Mobile chassis with wheels Transport handle Heavy-duty industrial construction Condition Used industrial condition. The vacuum cleaner is described as well maintained with normal signs of professional use. Supplied as shown. Operational status and detailed electrical/motor condition have not been independently verified. Auction-ID: A7-49535-20
Technical data Manufacturer: EMCO Model: Maximat Super 11 Speeds: 55 / 110 / 200 / 300 / 410 / 600 / 1100 / 2200 rpm 8 speed levels Digital display: ELESTA VISULESTA II E Hardened machine bed Configuration 3-jaw chuck available Additional 3-jaw chuck Collet holder with collet set Quick-change steel holder Tailstock available Accessories with tool holders and tips Machine in used condition Auction-ID: A7-49302-3061
Machine is fully functional. Auction-ID: A3-46152-5322
Machine is fully functional Auction-ID: A3-46152-5319
Specifications: Control: Fanuc Series 0i-MC X-axis: 2000mm Y-axis: 900mm Z-axis: 700mm Table length: 2300mm Table width: 970mm Max. part weight: 2800kg Spindle speed: 10.000rpm Spindle motor power: 18,5kW Positions on ATC: 32 Dimensions: Length: 5630mm Width: 3580mm Height: 3310mm Weight: 20.000kg Machine is equipped with: - 4th axis - Through spindle coolant - Oil chiller - Chip conveyor - Renishaw probe system Auction-ID: A1-49370-5
General Description Agricultural tractor manufactured by CASE , model Maxxum 5140 . Designed for general agricultural field work, implement operation and transport applications. Technical Details Manufacturer: CASE Model: Maxxum 5140 Machine type: Agricultural tractor Year: 1999 Serial number: JJF1047829 Operating hours: 13,168 h Engine: 5,883 cm³ diesel Engine power: 81 kW Machine weight: 5,020 kg Condition Used agricultural condition. Operational status and detailed mechanical condition have not been independently verified. Weight 5,020 kg Auction-ID: A7-49535-2
Electric windows + mirrors, automatic lighting, steering wheel control, cruise control, electrically heated front and rear window, multimedia system with Bluetooth, climate control with zone control, panoramic roof, front and rear parking sensors, tow bar with 13-pin plug 12v Auction-ID: A1-47415-204
Engine does not run well, Electric windows + mirrors, automatic lighting, cruise control, steering wheel control, Multimedia system with Bluetooth and navigation, climate control with zone control, adjustable rear seats, 7 seats, panoramic roof, front fog lights, front parking sensors + rear Auction-ID: A1-47415-199
Equipped with: Air conditioning, On-board computer, Airbag, Electric windows, Electric mirrors, Start stop system, Parking sensors, Cruise control, Center armrest, Multifunction steering wheel, Mileage NAP Auction-ID: A1-47415-155
including various flask clamps, tube racks and accessories. Auction-ID: A1-49818-1494
Capacity: X1400 x Y700 x Z600mm. Equipped with 24-piece magazine. With chip removal, filter installation, etc. Auction-ID: A1-49846-3
Equipped with: Topcon X-53x / MC-Max 3D-GNSS machine control system for excavator, year of manufacture 2022, consisting of GX-75 touchscreen, MC-X1 controller, 2× GR-i3 GNSS receivers, 6× TS-i3 inclination sensors suitable for three-piece boom and tiltrotator, Satel Easy radio modem, SL100 4G modem, complete wiring harness, mounting plates and heavy-duty transport case, equipped with 3DMC v12.2 and fully enabled GPS, GLONASS, Galileo and BeiDou licenses. Auction-ID: A1-47388-95
• VIN: VF1WF000365407930 • Registration number: RZE 8341G • Mileage: 61,000 km • Engine: 1.5 dCi (Diesel) • Power: 70 kW (95 HP) • Engine capacity: 1461 cm³ • Gearbox: Manual, 6-speed • Drive: Front-wheel drive (FWD) • Number of seats: 2 • Gross vehicle weight (GVW): 2,280 kg • Unladen weight: 1,481 kg • Payload: 719 kg • Maximum towing capacity: 12.15 kN • Fuel: Diesel • Emission standard: Euro 6 • Wheelbase: 3,081 mm • Fuel tank capacity: 60 l • Cargo space capacity: up to 4.6 m³ Auction-ID: A7-49744-25
Benson Foldable Wagon - Handcart Foldable - Max. 90kg - Black Auction-ID: A1-40897-352
Benson Foldable Wagon - Handcart Foldable - Max. 90kg - Black Auction-ID: A1-40897-250
Benson Foldable Wagon - Handcart Foldable - Max. 90kg - Black Auction-ID: A1-40897-354
Benson Foldable Wagon - Handcart Foldable - Max. 90kg - Black Auction-ID: A1-40897-353
Year & Manufacturer: 2001 — MECANOBOIS Dimensions (mm): 3000 × 2200 × 1600 Power supply: 400 V Auction-ID: A1-50001-24
New, unused Ifor Williams Tow-Max TM272-3617 PRO double axle trailer. Robust professional flatbed/box truck with galvanized steel chassis, Paraflex leaf spring suspension and reinforced PRO version. Equipped with perforated side panels, ideal for transporting bulky loads, green waste, packaging material etc. Brand: Ifor Williams Trailers Model: Tow-Max TM272-3617 PRO Version: double axle, braked GVW: 2,700 kg Own weight standard trailer: 540 kg Load capacity standard trailer: approx. 2250 kg Internal loading length: 3,600 mm Internal loading width: 1,745 mm Total length: approx. 5,180 mm Total width: approx. 1,880 mm Tires: 165R13 Galvanized steel chassis with reinforced heavy-duty drawbar Paraflex parabolic leaf springs, Ifor Williams axles Detachable 2 mm thick galvanized steel side boards. Sideboard height: 450 mm 15 mm strong wooden cargo floor 10 Integrated lashing/l ...
Precise, Smooth-running standard drill in a modern design. Many options included. - Emergency stop push button - Full engine protection - Distance spindle / base plate 529 mm - T-slot width 10 mm Drilling capacity in steel 14 /15 mm Projection 180 mm Drilling stroke 70 mm Speed 420 - 2100 rpm Table 250 x 220 mm Distance between drill head and clamping surface max. 380 mm Total power requirement 0.5/1.0 / 400 kW / volt Column diameter 65 mm Tool holder MK 2 Machine weight approx. 0.08 t Dimensions L x W x H 0.4 x 0.5 x 0.9 m Condition: never used / new (5) Auction-ID: A7-49782-492
THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-49883-166
Manufacturer: Isuzu Model: D-Max Double Cab Registration date: 30.07.2012 Engine: 3.0 L Turbodiesel Intercooler Power: 100 kW (136 hp) Fuel: Diesel Transmission: Manual Drive: All-wheel drive (4WD) TÜV 07/2026 Permissible total weight: 3,500 kg Color: Silver Metallic Double cabin with 5 seats Hardtop on the loading area Trailer hitch available Loading area with plastic tub Scratches due to use and age as well as minor dents present Underbody with superficial rust attachments Hardtop with slight traces of corrosion Interior with usual signs of wear Robust work and utility vehicle Ideal for forestry, agriculture, construction or leisure Sale in used condition Mileage 235000 Technical function and completeness have not been checked Auction-ID: A1-49582-6065
Complete Wheel Set BKT Ride Max IT 696 – John Deere 5080R Complete technical wheel set consisting of four agricultural tires with matching rims, taken from a John Deere 5080R. The set consists of two front wheels and two rear wheels. Specifications: Brand: BKT Type: RIDEMAX IT 696 Quantity: 4 complete wheels Construction: Radial Version: tubeless Front tires: 400/80R24 IND, approx. 14.9 R24 Rear tires: 480/80R34 IND, approx. 18.4 R34 Front rim: approx. 13 inches Front tyre diameter: approx. 1,250 mm Roller circumference front tyre: approx. 3,760 mm Rear tyre diameter: approx. 1,632 mm Rear tyre circumference: approx. 4,894 mm Rear tire load/speed index: 164A8/159D Maximum rear tyre load: approx. 5,000 kg at 40 km/h Pitch front: approx. 275 mm Pitch back size: approx. 205 mm Origin: John Deere 5080R Features: Transport-oriented block profile Broad footpri ...
maximum number of results exceeded
please refine your search
50 € 
