max s used for sale

Quick-release drilling device for milling machine, drilling machine. Drilling barrel diameter 5 mm. DIN 6348 - size 0. Schnellspanner DIN 6348 - Gr 0. Für Fräsmaschine, Tisch-Säulenbohrmaschine. Bohrung: 5mm

General SKU223Y097 MakeGericke / Azo Magento base g_extra_specificationsWith hopper and control cabinet (frequency inverter inside). Main Features MaterialStainless steel Motor0.21 KW Inlet diameter160 mm Specified Features - Metering screw MaterialStainless steel 1.4301 (304) Metering screws Metering screwcheck Screw diameter2x 25 mm Screw length350 mm With hoppercheck Hopper sizes800 x 800 x 500 mm Inlet160 x 160 mm Outletø 90 mm With motor0,12 kW (400 V, 1300 rpm) Screw speed53 rpm With breaking/mixing shaftcheck Motor0,09 kW (400 V 1300/17 rpm) Information Mounted on framecheck LocationBarneveld With switchgearcheck (as is) Floorspace0,80 x 0,80 m Total height1,25 m Weight120 kg CEcheckMetering screwsGerickeDosing units > Metering screwsBrand > Gericke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to  ...

General SKU219Y071 MakeAlexanderwerk Serial040-15588 Magento base g_extra_specificationstyp / type ex ms16- plug EEx IIC T6 Information TypeSKM/R Main Features MaterialStainless steel Motor1 KW Width250 mm Specified Features - Sieve granulator Granulating sievecheck Rotor sizesø 150 x 250 mm Sieve sizesø 160 x 250 mm Sieve perforation0,5 x 0,5 mm With hoppercheck Inlet250 x 250 mm Outletø 150 mm Motor1,0 kW, 380 V, 1415 rpm With variable speed drivecheck Speedmax. 1415 rpm MaterialStainless steel 1.4301 (304) Information No.040-1558 LocationBarneveld Mounted on mild steel framecheck Mounted on wheelscheck With switchcheck Floor space1,20 x 0,70 m Total height1,15 mSieve granulatorsAlexanderwerkSieves > Sieve granulatorsBrand > Alexanderwerk What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready  ...

General SKU050C487 MakeWalter Stöcklin AG Dornach No.251397 LocationBarneveld Main Features MaterialStainless steel Volume400 Ltr. Specified Features - Silo MaterialStainless steel 1.4435 (316L) Silocheck Closedcheck Capacity400 l Sizes1150 x 770 x 200 mm Conical bottom± 600 mm Flat topcheck With covercheck Manholecheck dia. 400 mm Outletcheckdia. 250 mm Information Mounted on wheelscheck Floorspace1,4 x 0,9 m Total height1,3m Weight450 kgSilosStoecklinTanks > SilosBrand > Stoecklin What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU050C489 MakeWalter Stöcklin AG Dornach No.263249 Year of construction1982 Mounted on legsMounted on wheels Main Features MaterialStainless steel Volume400 Ltr. Specified Features - Silo MaterialStainless steel 1.4435 (316L) Silos Closed vertical tank(1x) Capacity400 Ltr Vessel sizes1150x770x200mm Conical bottom± 600mm Manholedia. 400mm Outletdia. 250mm Silocheck Closedcheck Capacity400 l Sizes1150 x 770 x 200 mm Conical bottom± 600mm Flat topcheck With covercheck Manholecheck dia. 400 mm Outletcheckdia. 250 mm Information LocationBarneveld Floorspace1,4x0,9 M Total height1,3 M Weight450 KGSilosStoecklinTanks > SilosBrand > Stoecklin What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, T ...

General SKU050C491 MakeANAG Dudingen No.004 Year of construction1997 LocationBarneveld Main Features MaterialStainless steel Volume400 Ltr. Specified Features - Silo MaterialStainless steel 1.4435 (316L) Silocheck Capacity400 l Sizes1150 x 770 x 200 mm Conical bottom± 600 mm Flat topcheck With covercheck Manholecheck dia. 400 mm Outletcheckdia. 250 mm Information Mounted on wheelscheck Floorspace1,4 x 0,9 m Total height1,3 m Weight450 kgSilosAnag DudingenTanks > SilosBrand > Anag Dudingen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Manufacturer: HCI Year of Manufacture: 2010 Machine Type : Slitter Rewinder Condition: Excellent working condition, currently in production Material and Cutting Specifications - Materials: LDPE, LLDPE, BOPP - Cutting type: Razor - Number of cutting knives: 12 - Slitting width range: 50 mm to 1100 mm - Maximum operating speed: 300 m/min - Core sizes: 3 inch and 6 inch Unwinder - Type: Hydraulic / pneumatic shaftless - Maximum roll diameter: 800 mm - Maximum roll width: 1100 mm - Maximum roll weight: 120 kg Winder - Type: Shaft - Maximum winding width: 1100 mm - Maximum roll diameter: 500 mm Find more here - / Contact us at -

Manufacturer: Raulimex Year of Manufacture: 2009 Machine Type : Slitter Rewinder Condition: Excellent working condition, currently in production Material and Cutting Specifications - Materials: LDPE, LLDPE, BOPP - Cutting type: Razor - Number of cutting knives: 8 - Slitting width range: 50 mm to 1000 mm - Maximum operating speed: 300 m/min - Core sizes: 3 inch and 6 inch Unwinder - Type: Hydraulic / pneumatic shaftless - Maximum roll diameter: 800 mm - Maximum roll width: 1000 mm - Maximum roll weight: 120 kg Winder - Type: Shaft - Maximum winding width: 1100 mm - Maximum roll diameter: 500 mm Find more here - / Contact us at -

Manufacturer: Raulimex Year of Manufacture: 2015 Machine Type : Slitter Rewinder Condition: Excellent working condition, currently in production Material and Cutting Specifications - Materials: LDPE, LLDPE, BOPP - Cutting type: Razor - Number of cutting knives: 8 - Slitting width range: 50 mm to 1300 mm - Maximum operating speed: 350 m/min - Core sizes: 3 inch and 6 inch Unwinder - Type: Hydraulic / pneumatic shaftless - Maximum roll diameter: 800 mm - Maximum roll width: 1300 mm - Maximum roll weight: 120 kg Winder - Type: Shaft - Maximum winding width: 1300 mm - Maximum roll diameter: 500 mm Find more here - / Contact us at -

Multi-spindle drilling machine manufactured in 2000. This SCM Morbidelli Zenith F2 is designed for processing flat materials such as DTD, MDF, laminated boards, and solid wood. It features a maximum working width of up to 3,200 mm and a maximum working height of approximately 800 mm. If you are looking to get high-quality drilling capabilities, consider the SCM Morbidelli Zenith F2 machine we have for sale. Contact us for further details.

Manufacturer: Venjakob Model: VEN SPRAY ONE Type: Automatic flat-line spray coating machine with dry filter extraction Control: 15-inch touch screen PC with recipe management system Compliance: CE-certified, user interface and documentation available in local language Technical Specifications - Overall dimensions (L x W x H): 4,084 x 4,000 x 2,600 mm - Working width: 1,300 mm - Feed speed: 1 to 4 m/min - Gun traverse speed: 0.4 to 2.0 m/sec, infinitely variable (max. 25 double strokes) - Electrical connected load: 11 kW - Maximum supply air: 7,000 m3/h - Maximum exhaust air: 7,000 m3/h - Compressed air consumption: approx. 100 NL/h (varies with equipment) - Minimum workpiece size: 250 mm x 25 mm x 6 mm - Maximum workpiece size: unlimited length x 1,300 mm width x 50 mm height --------------------------------------------------------------- Find more here - / Contact us at -

A panel dividing saw Scheer & Cie is available. Cutting length: 4200mm, fence depth: 4250mm, table length: 4200mm, max. cutting height: 70mm, height levels: 3, feed rate: 40m/min, return speed: 50m/min, angular pressure device: 2400mm, air cushion tables: 3, air cushion table dimensions X/Y: 1720mm/800mm, clamping fingers: 7, saw motor power: 9kW, control: Siemens PLC, system: Linux Ubuntu with graphical interface. Including adjustable scoring saw, residual cut device, safety devices, remote maintenance, optimization program Optimax and freely adjustable labels that are printed during sawing. Documentation available. An on site inspection is possible.

Manufacturer: Koh Young Year of Manufacture: 2022 Machine Type : Pre AOI - Automated Optical Inspection System Koh Young Pre AOI systems use high-resolution optical imaging and advanced inspection algorithms to verify component presence, placement accuracy and solder paste coverage on PCBs prior to reflow. Integrating a Pre AOI station into an SMT line significantly reduces defect rates, rework costs and scrap by catching errors at the earliest possible stage in the assembly process. Find more here - / Contact us at -

Manufacturer: Koh Young Year of Manufacture: 2022 Machine Type : Post AOI - Automated Optical Inspection System Koh Young Post AOI systems use high-resolution 3D optical imaging and intelligent inspection software to verify solder joint quality, component placement and board integrity after reflow soldering. A Post AOI station is an essential quality gate in any high-reliability SMT production line, preventing defective boards from advancing to final assembly, test or customer delivery. Find more here - / Contact us at -

Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1475 mm Free frontal opening L-R: 3700 mm Free lateral opening F-B: 2300 mm Table surface area : 3600 x 2200 mm Slide area: 3500 x 2070 mm Die cushion capacity in table: 150 ton Die cushion stroke: 250 mm Die cushion pad area: 2780 x 1570 mm Ejector in ram: 60 ton Ejector stroke in ram: 150 mm Number of strokes: 7 - 21 s.p.m. Required power: kW Height over floor approx.: 9510 mm Weight of machine approx.: 260 ton

Press force: 650kN, Stroke: 150mm, Pressure piston diameter: 190mm, Column spacing X/Y: 950mm/460mm, Installation height: 500mm, Table dimensions X/Y: 900mm/870mm, max. stroke: 150mm, Operating pressure: 200bar, Machine dimensions X/Y/Z: approx. 1500mm/1750mm/2400mm, Weight: approx. 3000kg. Documentation available. An on site inspection is possible.

A relatively modern corona pretreatment system for single sided aluminum foil coating is available. Material: aluminum foil, intended use: coating, coating sides: 1, web width: 1350mm, treatment width: 1450mm, treatment speed: 3m/min, roll diameter: 125mm, roll length: 1550mm, generator type: Softal 9030, generator power: 3kW. Total system dimensions X/Y/Z: approx. 2000mm/1550mm/1700mm, weight: approx. 1500kg. Including ozone exhaust system RD 4. Documentation available. An on site inspection is possible.

A two-unit sanding machine Sandingmaster is available. Working width: 1100mm, max. workpiece width: 1000mm, max. workpiece height: 150mm, sanding belt dimensions X/Y: 1130mm/1900mm, feed: 14m/min. Machine dimensions X/Y/Z: approx. 3150mm/1500mm/1900mm, weight: approx. 2500kg. Including approximately 50 sanding belts with different crownings. Documentation available. An on-site inspection is possible.

A panel storage system including a saw is available. 1) Surface storage Becker, year of manufacture: 2011, length: 24900mm, width: 14170mm, stack height: 2000mm, lifting height: 2100mm, max. panel dimensions X/Y: 4200mm/2100mm, min. panel dimensions X/Y: 1800mm/600mm, max. lifting weight: 250kg, travel speed horizontal/vertical: 120m/min/40m/min, stack positions: 38, panel capacity at 20mm panel thickness: approx. 3400pieces. Including saw linkage, offcut handling with automatic measurement and separation device. 2) Panel sizing saw Schelling fh 4, year of manufacture: 2011, max. panel dimensions X/Y: 4100mm/2100mm, max. panel thickness: 60mm, thickness tolerance: 0.2mm, max. saw blade diameter: 350mm, cutting length: 4200mm, feed speed: 80m/min. Including storage linkage, lifting and lowering device, central cleaning system, infeed and outfeed systems and further accessories. This is a  ...

spindle passage: 230 mm turning diameter over bed: 970 mm turning diameter over slide rest: 720 mm Control: Fanuc OiTD turning length: 2200 mm total power requirement: 37 kW weight of the machine ca.: t dimensions of the machine ca.: m Year of manufacture 2013 Control: Fanuc OiTD Other controls possible Turning length (mm) 2200 Max. turning diameter (mm) 970 Max. turning diameter over slide (mm) 720 Spindle diameter (mm) 230 Diameter range (mm) 850 Speed: 500 kW 37 Voltage: 400V Hz 50 Including: 4-jaw chuck, Ø 800 mm rear Pneumatic 3-jaw chuck, Ø 600 mm front The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your worksh ...

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,59 t dimensions: 1,9 x 1,4 x 1,8 m Hydropneumatic Fully Automatic • Mitering Left/Right • Bevel cuts up to 45° (shifter) a. b. • Pneumatic double clamping device • Pneumatic vertical clamping device • Integrated coolant spray system MPS control: • Save cutting start/end position • Display of power consumption, piece count, cutting time, etc. • Adjustable water cooling • Cutting pressure regulator The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ID3691 Atlas Speedcut 100 year/Baujahr 2013 Wire saw, engine defect Wire saw, motor defect

Manufacturer: Ekra Model: Serio 5000 Machine Type: Fully Automatic SMT Stencil and Screen Printer Year of Manufacture: 2022 Configuration: Back-to-Back dual printing system User Interface: SIMPLEX touchscreen control Vision Alignment: EVA - EKRA Vision Alignment System (dual CCD cameras) Stencil Cleaning: iROCS automatic stencil underside cleaning Print Repeatability: +/- 12.5 micron at 6 Sigma Application: Solder paste and adhesive printing on PCBs Find more here - / Contact us at -

ATEC 1220 Ltr stainless steel vessel with anchor stirrer with scrapers (5,5kw), jacket 250 Ltr, two heaters (2x7,5kw), inlet/outlet DN50, for atmospheric pressure, control cabinet, speed controlled stirrer, on wheels

We supply and install our own, new, digital PLC controllers suitable for storage lifts and paternosters of all manufacturers on the market (e.g. Kardex, Hänel, Megamat, Electrolux Constructor, Zambelli, Intertex, Lista and many more). Our LTG StoreControl LL (storage lifts) and LTG StoreControl P-Touch (paternoster) control systems thus offer replacements for controls for which all spare parts are otherwise no longer available. With our controls, it is easy to connect your dynamic warehouse systems to higher-level warehouse management systems or to implement access restrictions.

Sommer & Strassburger Stainless steel vessel 155 Ltr.; jacket 25 Ltr.; Maximum pressure -1/6 bar; Maximum temp. 130C, mounted on stainless steel frame on wheels, down outlet diameter 50mm for clamp connection

SINGLE SCREW WASHING TANK, dimensions about 800 x 2.500 mm, simple washing/rinsing system for plastics, including:, hopper and screw conveyor to fill the buffer silo, buffer silo for regrinds, screw conveyor to the tank, n.1 horizontal screw with dipping paddles to sink the material with 1 gearmotor, extraction screw to centrifuge, DRYING CENTRIFUGE, 1300 mm long,, 22 kw drive, blower and pipes, installed power - used power in work: about 60-65% : 28, availability: immediate, options available: reconditioning , capacity: 300 kg/h depending on material and contamination

Code: 0321 Brand: SCM Model: MULTIFLEX C - CE Standard Automatic working center for window frames for tenoning, profiling and contouring - Max workpiece thickness mm 140 - CE Standard Technical data Automatic carriage with chipbreaker Max working length 2800 mm Min/max workpiece thickness 30/140 mm End cutting saw diameter 400 mm - Motor Hp 4 Tenoning spindle useful length mm 320 - Motor Hp 10 Spindle diameter mm 50 Max tool diameter mm 350 Profiling spindles: 1° Anti-splinter profiling spindle length 320 mm - Motor Hp 7,5 - Tool diameter mm 220 2° profiling spindle length mm 320 - Motor Hp 7,5 - Tool diameter mm 220 Min and max diameter of profiling spindles tools mm 100/220 Profiling spindles diameter 50 mm Tool group Zuani Variable speed feed Glazing bead recovery group - Motor Hp 3 - Diameter of suction mouth mm 50 Overall dimensions mm 2400 x 3300 x 200 ...

Electric heating: 28 kW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood chips Without the after-burning system Installation dimensions of the machine in cm: Width: 150 Lenght: 145 Height: 275 Trolley dimensions in cm: 100 x 100 x 200

Qty. 1 Second-hand 20-Hi Sendzimir Rolling Mill Mfc.: SUNDWIG, PAULY, ABB, Schneider Type: 20-HI – WV 20 SHE Built: 1988 Revamping: 2018 Mechanical & electric including new AGC and X-ray thickness gauge Strip width: 300 – 670 mm Thickness: 0.8 mm Exit: 0.01 mm Rolling speed: 300/500 m/min. Rolling materials: Stainless steel, Copper, Invar, Nickel, Si steel, Mo, Ti

Code: 0322 Brand: SCM Model: L'INVINCIBILE SI 3 - CE Standard Electronic panel saw with controlled axis, tilting blade and scoring unit, for furniture, panels, custom-made furnishings, doors, wooden window frames, kitchens, bathroom furniture, plastics, composite materials and various - CE Standard - Year 2017 Technical data: Carriage made entirely of aluminium with contact sliding system on hardened and ground steel guides Electronic control EASY TOUCH 12: 12-inch flat colour screen - Direct management of the following working axis using manual, manual incremental, semi-automatic and automatic methods: main blade lifting, blade unit tilting, parallel guide movement, scoring blade lifting and translation. Operator assistance with graphics support. Tool database Operator assistance function on electronic control Adjustable wall-mounted control panel Scoring unit with indepe ...

Fully automatic syringe inspection system for 1 ml long syringes with liquid contents. Number of camera stations in the carousel: 9 units. Output: up to 24,000 syringes/hour. The line is equipped with: Denester INOVA/ OPTIMA, type SH 250, Renester INOVA/ OPTIMA, type TR 240, labeller INOVA/ OPTIMA, type ESK 2411 and a wide range of accessories.

Dough Sheeter/Cutting Table Combination Year of construction 2014 Semi-automatic Band width: approx. 64cm Band length: approx. 150cm Roll gap 0.3-45mm with cutting roller frame for 2 tools completely stainless steel - Ribbons new - Tested and cleaned

Product protection workbench with horizontal, low-turbulence displacement flow. ISO Class 5 with UV-Light.

Replacement control system for storage lifts and paternoster systems. With our "LTG StoreControl LL and StoreControl P" controllers, we are able to modernize paternosters and lifts that have a defective Cedes Safe C200 or Safe C400, for example, and keep them operational for many years to come. Our control systems fit the storage systems of all manufacturers and types. The storage systems can remain fully loaded for the conversion. We can offer special solutions as well as software connections.

Unused, like new.

2 labeling units for applying a lid and a body label,, Dispensing width SES 80: 85 mm, SES 120: 125 mm,, dispensing speed: 0 - 60 m/min,, Unwind: diameter: 300 mm,, spool: diameter: 170 mm,, was used to label plastic cans.

Process plant for the production of nut butters,, consisting of:, Product feed container (stands on platform),, 2 Lico mills with 2 Börger product pumps,, 2 collecting containers with lids for the puree,, 2 control cabinets for the 2 mills,, chiller, 6 x product tanks with a capacity of approx. 760 kg nut butter) and control cabinet,, Each tank can be controlled individually., Settings: speed of the agitator, stirring interval (x min on, x min off)

Control defective, Dimensions / weight: LxBxH: 2.200 mm x 1.200 mm x 2.000 mm.

Rotation autoclave, four-cage autoclave, full water system with rotation, autoclave diameter: 1100 mm, allowable operating pressure 6 bar, allowable operating temperature 200 degrees, content 3400 liters, with Siemens control and digital recorder Jumo., refurbished and inspected.

The Oxipack SLT is a state-of-the-art, non-destructive leak tester specifically designed for packaging inspection. It enables precise and fast leak detection without damaging the object being tested. This device is ideal for use in quality control and helps to ensure the integrity of packaging. With its user-friendly interface, the SLT offers straightforward handling and reliable results. The modern technology ensures high sensitivity and repeatability in leak testing, allowing even the smallest leaks to be effectively detected., This used unit, serviced by Oxipack as recently as November 2025, meets all required standards and is both durable and low-maintenance, making it a cost-effective solution for companies that need to conduct regular testing. The SLT is an excellent choice for any industry where tightness is critical, including the food, pharmaceutical, and packaging sectors., pow ...

Set packer for glasses, packing pattern 3 x 4., The pre-grouped glasses are transferred into the prefabricated tray using vacuum suction cups., The 2013 VestTech Jar Packer is a reliable solution for the packaging industry, specializing in the precise and safe packaging of jars. The unit has a solid construction designed for long-lasting use in demanding production environments. With its user-friendly operation and high efficiency, this jar packer offers an ideal combination of performance and reliability. It is perfect for companies looking for a cost-effective way to optimize their packaging processes. With the VestTech Jar Packer, you can ensure that your products are packaged safely and precisely, resulting in improved productivity and higher customer satisfaction.

for dosing sauerkraut or red cabbage into flow packs (without flow pack machine),, Dosage 250 g to 500 g Speed of the screw dosing frequency controlled,, 40 beats per minute possible,, different programs can be saved., power: up to 40 cycles / min, and a: up to 40 cycles / min, Materials + surfaces: Clean room made of wood (solid carpentry), stainless steel surfaces, easy to clean.: up to 40 cycles / min

Design: stainless steel, weighing cells from Philips, dimensions: approx. 1,300 x 1,250 x 720 mm, weight: approx. 50 kg.

Automatic small parts warehouse (AKL) with conveying technology for E3 - boxes (600x400x320mm), designed for 6 days per week, 2-shift operation,, Goods receipt: 60 - 200 containers per hour (intermittent),, Storage capacity: 14,000 containers - parking spaces,, Footprint: Length x Width x clear height: 72.00 x 52.00 x 13.80 m,, Description in the attached Word document.

Find more here - / Contact us at -

Packaging capacity: approx. 30pieces/min, side belt height: 50mm, max. carton dimensions X/Y: 515mm/505mm, min. carton dimensions X/Y/Z: 140mm/90mm/80mm, tape width: 50mm, weight: approx. 200kg. An on-site inspection is possible.

A Burghardt cardboard shredding machine is available. Cutting width: 320mm, max. cardboard thickness: 12mm, throughput capacity: approx. 2m³/h, operating speed: 10m/min, motor power: 0.75kW, machine dimensions X/Y/Z: approx. 500mm/600mm/650mm, weight: approx. 100kg. Documentation vorhanden. An on-site inspection is possible.

Key data: 3140 mm, 1 mm

new Schechtl motorized guillotine shears, with the following equipment: - within the EU: 32 amp connection plug with 5 m cable - 1 pair of steel scissor knives (single-edged) - Manual depth stop 0-750 mm with pneumatically operated tilting table, Laying down to the front - Support plates with 10 mm graduation and tape measure - Footswitch - Three-sided safety cage around the depth stop - Compressed air must be available: min. 6 bar, max. 10 bar - approx. 50 l/min - Cut-gap illumination - Electronic position display - Contact stroke counter tico 731.3 - Sheet metal stacking trolley light max, load capacity 300 kg Working length 3140 mm 20 Sheet thickness steel 1.5 mm 30 Sheet thickness Alu 2.25 mm 40 Blechdicke VA/Sheet thickness stainless 1,0 mm 50 Maschinennummer/Machine number MT 13952 Working length: 3140 mm Sheet thickness steel: 1.5 mm Sheet thickness alumi ...