129,478 used machines on RESALE, but how to find them? Machine Search
Technical key data: Year of manufacture: June 2015 Width: approx. 19.00 m Length: approx. 25.00 m Eaves height: approx. 4.50 m Construction: hot-dip galvanized steel frame construction (bolted) Building position: free-standing on three sides, a gable wall attached to a lower intermediate building Roof & wall: insulated sandwich panels Construction & Reusability: Hot-dip galvanized, bolted supporting structure → can be optimally dismantled Very well-preserved sandwich panels → almost 1:1 reconstruction possible Core advantage: real second-life hall with minimal loss of substance Roof & lighting concept: Trapezoidal sheet metal sandwich roof continuous ridge skylight strip Additional suspended LED lights Result: very bright, energy-efficient hall Gates & Usage: 2 sectional doors with light segments Suitable for forklifts, vehicles and logistic ...
Key Equipment Specification: 1 of Gas Turbine: Manufacturer: Solar Model: Titan 130 Operating hours: 3000 Variant: 20501 GSC Combustion Standard: Non Solonox (conventional) Year Of Manufacture: 2012 Rated Output: 15MW Fuel: Gas Only 1 of Speed Reduction Gear Box: • Manufacturer: Solar Turbines • Type : EPICYCLIC • Ratio: 7.4648:1 • Rated Power : 26,251HP • Input Speed1; 11,197RPM • Output Speed : 1,500RPM • Overload Factor: 1.1 • 1 of Generator: • Manufacturer: ABB • Rated Output: 22,789 KVA • Power Factor: 0.8 • Voltage: 11KV • Frequency: 50Hz • Speed: 1,500RPM SCOPE Gas Turbine Assembly (Non SoLoNox) Speed Reduction Gear Assembly Shaft Coupling Exhaust Gas System Enclosure Ventilation System Generator Air Inlet System Fuel Supply System. SCOPE Colling Water System Compressed Air System Fire Fighting Syste ...
Latex coating system by Brückner carpet coating system and laminating system Technical data: Max. Working width: 5200 mm The clamping machine can utilise all reserves can be used up to a clamping width of 5250 mm. Min. working width: 3400 mm for Prage 3500 mm Drive speed: 2 -. 15 m/min. Drive: Direct current motors Operating side: right Colour of the system: RAL 1.015 structure Goods transport system: vertical needle chain Length of one field: 3 m Fans per field: 2 The output of one fan: . Fan power: 7.5 kW Heating systems - per field: 2, separately above and below the web Adjustable air temperature: 50 - 250 .° C Achievable temperature spread: 160 ° at the top, 100 ° at the bottom or top 200 ° , bottom 125 ° Size of the dryer Pre-drying: 5 fields Gelling channel: 3 fields Vulcanising channel: 12 fields Production speed: 9- m/min. with the following data: P ...
New galvanized or painted inclined props 3m, 3.50m, 4.00m at great conditions directly from the factory. From.34,50€/ piece.+ VAT Inclined props new, painted 1,60m - 3,00m = 34,50€/ piece Inclined props new, painted 2.00m - 3.60m = 35.50€/ piece Inclined props new, painted 2.20m - 4.00m = 38.50€/ piece Inclined props new, galvanized 1.60m - 3.00m = 38.90€/ piece Inclined props new, galvanized 2.00m - 3.60m = 40.90€/ piece Inclined props new, galvanized 2.20m - 4.00m = 42.90€/ piece Frame for props new, painted 70,00€ European joint product. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. All prices excl. VAT and transport Subject to sale Andreas Becker e. Kfm. VAT ID NUMBER: DE279047055 Office/ Storage Address: Company SFS Ulmer Str. 1 89614 Öpfingen Ulm Registration ...
New galvanized or painted inclined props 3m, 3.50m, 4.00m at great conditions directly from the factory. From.34,50€/ piece.+ VAT Inclined props new, painted 1,60m - 3,00m = 34,50€/ piece Inclined props new, painted 2.00m - 3.60m = 35.50€/ piece Inclined props new, painted 2.20m - 4.00m = 38.50€/ piece Inclined props new, galvanized 1.60m - 3.00m = 38.90€/ piece Inclined props new, galvanized 2.00m - 3.60m = 40.90€/ piece Inclined props new, galvanized 2.20m - 4.00m = 42.90€/ piece Frame for props new, painted 70,00€ European joint product. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. All prices excl. VAT and transport Subject to sale Andreas Becker e. Kfm. VAT ID NUMBER: DE279047055 Office/ Storage Address: Company SFS Ulmer Str. 1 89614 Öpfingen Ulm Registration ...
We are pleased to offer a high-performance Cold Knife Scoring System manufactured in 2014. This machine is ideal for precise cutting and scoring applications in various industrial sectors, including automotive manufacturing. Technical Details: - Dimensions (L x W x H): 3800 mm x 3200 mm x 2700 mm - Weight: 6000 kg - Table Size: Approximately 1500 mm x 700 mm - Number of Robots: 1 - Number of Workstations: 2 - Table Type: Fixed table Power and Control: - Operating Voltage: 3x400 V AC / N / PE - Control Voltage: 24 V DC - Frequency: 50 Hz - Total Power Consumption: 15 VA - Rated Current: 63 A - Pneumatic Pressure: 6 bar
New galvanized or painted inclined props 3m, 3.50m, 4.00m at great conditions directly from the factory. From.34,50€/ piece.+ VAT Inclined props new, painted 1,60m - 3,00m = 34,50€/ piece Inclined props new, painted 2.00m - 3.60m = 35.50€/ piece Inclined props new, painted 2.20m - 4.00m = 38.50€/ piece Inclined props new, galvanized 1.60m - 3.00m = 38.90€/ piece Inclined props new, galvanized 2.00m - 3.60m = 40.90€/ piece Inclined props new, galvanized 2.20m - 4.00m = 42.90€/ piece Frame for props new, painted 70,00€ European joint product. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. All prices excl. VAT and transport Subject to sale Andreas Becker e. Kfm. VAT ID NUMBER: DE279047055 Office/ Storage Address: Company SFS Ulmer Str. 1 89614 Öpfingen Ulm Registration ...
The Stanzvorrichtung TrimStar 250kN is a high-performance stamping machine designed for precision and efficiency in manufacturing processes. This machine is tailored for heavy-duty applications, particularly in the automotive industry. Hydraulic Pressure: - Max Pressure: 180 bar - Operating Pressure: 150 bar Power: 25 kW Operating Frequency: 50 Hz Connection Voltage: 3 x 400 V Full Hydraulic System Installation Dimensions (L x W x H): 4700 mm x 2790 mm x 4850 mm Weight: 18,000 kg Find more here - / Contact us at -
New galvanized or painted inclined props 3m, 3.50m, 4.00m at great conditions directly from the factory. From.34,50€/ piece.+ VAT Inclined props new, painted 1,60m - 3,00m = 34,50€/ piece Inclined props new, painted 2.00m - 3.60m = 35.50€/ piece Inclined props new, painted 2.20m - 4.00m = 38.50€/ piece Inclined props new, galvanized 1.60m - 3.00m = 38.90€/ piece Inclined props new, galvanized 2.00m - 3.60m = 40.90€/ piece Inclined props new, galvanized 2.20m - 4.00m = 42.90€/ piece Frame for props new, painted 70,00€ European joint product. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. All prices excl. VAT and transport Subject to sale Andreas Becker e. Kfm. VAT ID NUMBER: DE279047055 Office/ Storage Address: Company SFS Ulmer Str. 1 89614 Öpfingen Ulm Registration ...
New galvanized or painted inclined props 3m, 3.50m, 4.00m at great conditions directly from the factory. From.34,50€/ piece.+ VAT Inclined props new, painted 1,60m - 3,00m = 34,50€/ piece Inclined props new, painted 2.00m - 3.60m = 35.50€/ piece Inclined props new, painted 2.20m - 4.00m = 38.50€/ piece Inclined props new, galvanized 1.60m - 3.00m = 38.90€/ piece Inclined props new, galvanized 2.00m - 3.60m = 40.90€/ piece Inclined props new, galvanized 2.20m - 4.00m = 42.90€/ piece Frame for props new, painted 70,00€ European joint product. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. All prices excl. VAT and transport Subject to sale Andreas Becker e. Kfm. VAT ID NUMBER: DE279047055 Office/ Storage Address: Company SFS Ulmer Str. 1 89614 Öpfingen Ulm Registration ...
AFS Corona Pre-Treatment system Type (Typ): G 60 M Input (Eingang): - Voltage (V): 400 - Current (A): 16 - Frequency (Hz): 50/60 Output (Ausgang): - Power (W): 6000 Technical Data Roller Width: 2700 mm Electrode Width: 2500 mm Maximum Mechanical Speed: 250 m/min Maximum Generator Power: 6 kW / 1 & 5 Core Operation Electrode Type: Ceramic Electrodes Discharge Roller: Ceramic Roller Drive Type: Driven Discharge Roller Cooling Type: Water-cooled Pre-treatment Direction: Controllable via web path Pressure Rollers: Present on both sides Find more here - / Contact us at -
New galvanized or painted inclined props 3m, 3.50m, 4.00m at great conditions directly from the factory. From.34,50€/ piece.+ VAT Inclined props new, painted 1,60m - 3,00m = 34,50€/ piece Inclined props new, painted 2.00m - 3.60m = 35.50€/ piece Inclined props new, painted 2.20m - 4.00m = 38.50€/ piece Inclined props new, galvanized 1.60m - 3.00m = 38.90€/ piece Inclined props new, galvanized 2.00m - 3.60m = 40.90€/ piece Inclined props new, galvanized 2.20m - 4.00m = 42.90€/ piece Frame for props new, painted 70,00€ European joint product. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. All prices excl. VAT and transport Subject to sale Andreas Becker e. Kfm. VAT ID NUMBER: DE279047055 Office/ Storage Address: Company SFS Ulmer Str. 1 89614 Öpfingen Ulm Registration ...
Model : 41-SERIE-1350-WRDW Weight of Machine Parts - Machine: Approx. 7,000 kg - Conveyor table: Approx. 1,050 kg (without motor) - First contact rollers: Approx. 160 kg - Tension roll: Approx. 75 kg Find more here - / Contact us at -
- Type: Aqua Mammut ( Parts Washing System ) - System Type: Front Loader --------------------------------------------------------------- Specifications: - Empty Weight: 1,700 kg - Load Capacity: 700 kg - Dimensions (Closed): 2,150 x 2,700 x 1,850 mm (H x W x D) - Dimensions (Open): 2,150 x 2,700 x 2,950 mm (H x W x D) - Basket Size: 1,000 x 1,500 mm - Usable Height: 350 mm - Maximum Filling Quantity: 175 l - Performance: 2 x 7.5 kW (3 x 400 V/50 Hz) - Maximum Operating Temperature: 75°C Find more here - / Contact us at -
CNC turning-milling center Emco Hyperturn 65 Powermill SMYB Commissioning 7/2019 At call! Siemens 840D-SL Shopturn Main spindle BigBore spindle passage 76mm KK8 - 4,000 1/min Sub-spindle KK6 - 5,000 1/min 40-speed chain magazine HSK-T63 Turret bottom VDI30 / Sauter Electronic handwheel Emco Tool Breakage and Wear Gear milling Shopturn Expansion Pack 5-axis simultaneous machining Energy management for Sinumerik OPC UA / Siemens interface 3D machine model Emco Standard Bar Feeder Interface Machine Status Lamp LED Multiflow Cleaning Gun Oil Mist Separator Belt filter system with IKZ Main Spindle Clamping Hook Hainbuch Clamping Top Mini Combi Ax Hoist Sub-spindle Schunk 185mm THW-plus with hard jaws The options list is complete! No interest in dealer enquiries! No separate dealer price! WB mechanics GmbH is a precision mechanics workshop that markets its ...
With Win XP, Fobagraf and MarkUs, Z-axis, rotary axis for interior and exterior lettering. MarkUs with camera for point and shoot, fiber laser with approx. 10,000 hours, laser power 50.4W Lens 163mm, ( 100+254mm possible ) Dimensions L x W x H: 90.00cm x 114.00cm x 172.00cm Lifting door opening via compressed air, size 80x30cm Vario S – Housing with side door – Automatic start via button on the front right Stable monitor arm with keyboard and mouse Interior with Z-axis, rotary axis, interior lighting with socket, camera with red illumination, flex extraction arm
Offer 24589 Specifications: - Suitable for welding steel, aluminum special metals, Cr Ni, etc. - Welding current 450 A 60% ED - 360 A 100% ED - Welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - FRONIUS water cooling unit - Separate wire feeder case - Intermediate package device – wire feeder case 14 m - 4 rolls of wire feeder infinitely adjustable - MIG - MAG Hosepack water-cooled approx. 4 m - Ground cable -Reducer - Mobile undercarriage - Connection 400 V / 6.6 A / 8.7 kVA - Space requirement approx. W 650 x H 900 + 450 x D 1100 mm - Weight approx. 200 kg
Offer 24600 Specifications: - Suitable for welding steel, aluminum special metals, Cr Ni, etc. - Welding current 450 A 60% ED - 360 A 100% ED - Welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - FRONIUS water cooling unit - Separate wire feeder case - Intermediate package device – wire feeder case 14 m - 4 rolls of wire feeder infinitely adjustable - MIG - MAG Hosepack water-cooled approx. 4 m - Ground cable -Reducer - Mobile undercarriage - Connection 400 V / 6.6 A / 8.7 kVA - Space requirement approx. W 650 x H 900 + 450 x D 1100 mm - Weight approx. 200 kg
Offer 24603 Specifications: - Suitable for welding steel, aluminum special metals, Cr Ni, etc. - Welding current 450 A 60% ED - 360 A 100% ED - Welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - FRONIUS water cooling unit - Separate wire feeder case - Intermediate package device – wire feeder case 10 m - 4 rolls of wire feeder infinitely adjustable - MIG - MAG Hosepack water-cooled approx. 4 m - Ground cable -Reducer - Mobile undercarriage - Connection 400 V / 6.6 A / 8.7 kVA - Space requirement approx. W 650 x H 900 + 450 x D 1100 mm - Weight approx. 200 kg
Offer 24604 Specifications: - Suitable for welding steel, aluminum special metals, Cr Ni, etc. - Welding current 450 A 60% ED - 360 A 100% ED - Welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - FRONIUS water cooling unit - Separate wire feeder case - Intermediate package device – wire feeder case 1 m - 4 rolls of wire feeder infinitely adjustable - MIG - MAG Hosepack water-cooled approx. 4 m - Ground cable -Reducer - Mobile undercarriage - Connection 400 V / 6.6 A / 8.7 kVA - Space requirement approx. W 650 x H 900 + 450 x D 1100 mm - Weight approx. 200 kg
CNC turning-milling center Emco Hyperturn 65 Powermill SMYB Commissioning 10/2017 At call! Siemens 840D-SL Shopturn Main Spindle SuperBigBore Spindle Passage 95mm KK8 - 3,500 1/min Sub-spindle KK6 - 5,000 1/min Milling spindle HSK-T63 12,000 1/min / new milling spindle 2024 40-speed chain magazine HSK-T63 Turret bottom VDI30 / Sauter Electronic handwheel Emco Tool Breakage and Wear Gear milling Shopturn Expansion Pack 5-axis simultaneous machining Energy management for Sinumerik OPC UA / Siemens interface 3D machine model Emco Standard Bar Feeder Interface Machine Status Lamp LED Multiflow Cleaning Gun Oil Mist Separator Belt filter system with IKZ Main Spindle Clamping Hook Hainbuch Clamping Top Mini Combi Ax Hoist Sub-spindle Schunk 185mm THW-plus with hard jaws The options list is complete! No interest in dealer enquiries! No separate dealer price! ...
with computer control Band width: approx. 63cm Band length: 75cm extendable on one side to 110cm Different belt speeds Roll gap 0.5-45mm with trawl net and knitting board Machine completely stainless steel - Ribbons new - Tested and cleaned
Specifications: Maximum cutting width: 3100 mm Maximum cutting capacity for steel St40: 15.0 mm Mot. Adjustable rip fence: 1500 mm Mot. Adjustable cutting gap adjustment Cutting angle adjustment Working height: 860 mm Motor power: 22 kW Side protective grille with light barrier back Dimensions (length x width x height): approx. 4650 x 3600 x 2050 mm Weight: approx. 13,5-ton
Key data: 206 KW, 500 kVA, 400 V
Sokratherm Gas-CHP GG202 oE Gas electricity and heat generators from 2019 with 10,777 operating hours, Complete CHP (closed unit) with additional silencer. 1 available 202 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 47.2M7 V 6/4, 500 KVA Manufacturer: Sokratherm Model: GG202 oE Type: Gas CHP Serial Number: 3131754 Engine: MAN E3262E302 Electric power [KWel]: 206 Thermal power [KWth]: 316 Gas Capacity [KWgas]: 561 Year of Make: 2019 Hours: 10,777 Weight unit [kg]: 6,500 Dimensions LxWxH [cm]: 400 x 150 x 240 AC Generator LSA 47.2M7 V 6/4 Manufacturer: Leroy Somer Model No.: LSA 47.2M7 V 6/4 Type: AC Synchronous Generator Serial Number: 353345/1 Power [KVA]: 500 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 722 Speed [1/min]: 1,500 Year of manufacture: 2018
STEAM BOILER 50 TONS SERIAL NO. BMWT0465 BOILER CAPACITY 50,000 KG/HR BOILER MODEL BMVG 50-25 YEAR OF MANUFATURE 2015 JKKP APPROVAL NO. JKKP IS 127/453/1-201527025 HT PRESSURE 3750 kPa DESIGN PRESSURE 2500 kPa DESIGN CODE BS 1113:1999 THIRD PARTY ABS CONSULTING Email Contact: supawadee@greatglove.com phone number: +6693 7478585
Sell Fenwick S30W diesel sideloader, 3 Ton capacity, telescopic forks, maximum height 5.3 meters, 3021 hours, Up-to-date revisions. Video on Demand
Good day We offer you a used OCC sorting system consisting of a paper spike, type 2000, from the manufacturer Grumbach und Petermann GmbH, with a paper take-off belt, Bollegraaf type HBGT 1200 x 4760 15° and a single-deck star screen, fine, manufacturer Lubo Screening & Recycling Systems B.V. The machines were dismantled down to the base frame, derusted, primed and finally painted. Defective shafts and rubber stars, the V-belts and spikes of the PaperSpike as well as pneumatic cylinders were replaced. All bearings and drive chains were replaced, and the engines and transmissions were checked. A viewing is possible by appointment. We assume no liability for the technical information or any errors. We would be happy if this machine is interesting for you. Your service team Mertens & Frowein GmbH
Good day We hereby offer you a used sliding belt conveyor belt, type ITE/P50, from the manufacturer Schunk Fördertechnik GmbH, built in 2003. The centre distance is 2300 mm, the belt width 790 mm. The drive is provided by a geared motor with drive chain. Machine documentation is no longer available. We would be pleased if this conveyor belt is interesting for you. Your service team Mertens & Frowein GmbH
Seewer Rondo Sheeter Type: SSO 62 Fully automatic sheeting machine with flour sprinkler digital control Band width: 58cm on castors with brakes Tested & Cleaned Height: 120cm Width: 280cm Depth: 110cm
; Gross weight [kg]: 270; Maximum lift capacity [kg]: 240
; Gross weight [kg]: 860; Inspection Date: 2025-12-12; Amount of previous owners: 1; Maximum lift capacity [kg]: 230
Height 1750 mm Width 1260 mm Length 2380 mm Power supply: 400V 50Hz 3N Description The machine is adapted to transport shredded dry industrial materials.
Tires, solid rubber tires, tractor tires, forklift tires -Condition: unused -Tire size: 7.00-15 SC10 -4 pieces available -Price per piece -Dimensions: Diameter 700 x 170 mm -Weight: 52 kg
Qty. 1 Second-hand slitting line for stainless steel – in storage Mfc.: SACMA Overhauled by CAMU Built: 1992 Dismantled: 2024 Coil weight: max. 27,000 kg at uncoiler, 10,000 kg at recoiler Coil internal diameter: 500 mm Speed: max. 140 m/min Double mandrel with centering side 2 cutting heads / shears with 180 mm diameter shafts New sheet metal tensioner Complete set of blades for stainless steel Ribbon turner on rail complete with scale Scrap baler
available is a complete Plant with Equipment to produce Airspring! 3 Roll Calender with line and 84" Twin Mill Bias Cutter Several Building machine several hydraulic Curing presses testing machine 3 x assembly lines Winder ...
The WKS in maximum format with 250 mm extended depth and "tank extensions" for heavy and voluminous stored goods Tool cabinet with 3 Vertical pull-outs of 300 mm width with each 1,800 kg load capacity Fully assembled including 30 Bulk material trays WKH 927 with 4 each Dividers TRB 927/928 Dimensions: 1,040 b x 2,140 h x 1,300 t Curb weight: 509 kg Structure powder-coated in Gentian blue RAL 5010 (body) and Off-white RAL 9002 (excerpts)
! KNIFE RETURNS! The WKS in maximum format with 250 mm extended depth and "tank extensions" for heavy and voluminous stored goods Tool cabinet with 3 Vertical pull-outs of 300 mm width with each 1,800 kg load capacity Fully assembled including 30 Bulk material trays WKH 927 with 4 each Dividers TRB 927/928 Dimensions: 1,040 b x 2,140 h x 1,300 t Curb weight: 509 kg Structure powder-coated in Gentian blue RAL 5010 (body) and Off-white RAL 9002 (excerpts)
Key data: 6 Meter
Machine Type: Plasma Inverter Cutting Machine Make EP-Systems Type M 40.60 Connection voltage: 1 x 230 volts, setting range: 15 – 40 amps, duty cycle: 60 % ED at 40 amps 100% ED at 30 amps Current adjustment infinitely variable max. quality cut 2 mm max. cut-off cut 5 mm Cooling inverter through built-in fan Cooling burners by compressed air Portable assembly system design Fuse 16 amps Dimensions L x W x H 470 x 250 x 250 mm Weight 10 kg Age 5 years Condition workshop-tested new incl. UVV test report Scope of delivery Plasma cutting system with the following accessories: 1 piece plasma torch PH-70, 6 mtr. long 1 piece ground cable 1 piece compressed air hose 1 Piece Instruction Manual Warranty 12 months from the date of delivery Original price €1,750.00 + VAT Price kpl. with the above accessories €159.00 + VAT _____________________________ ...
SPECIFICATIONS: Spindle: Ø 35 mm Manual adjustment Engine brake Installed power 5.60 kW
Used Skerman (France) stainless steel coating pan. Total volume 500 Liters. Batch load aproximately 200-250 kg. Pan depth 10450 mm, Pan diameter 1200 mm. Unit with drive ready to work. Overall dimentions 1900 mm, 1250 mm, 2100 mm.
Capacity (max.): 600 pieces/h Connected loads: 220/240 V, 50/60 Hz, 17.5 A Machine dimensions (LxWxH):1520 x 790 x 1090 mm Machine weight: 160 kg Rated power: 3,700 W Rated current: 17.5 A Min. product weight : 0,05 kg Max. product weight: 15 kg Max. film width: 600 mm Max. film roll diameter: 300 mm Film roll core diameter: 77 mm Film thickness: 10-50 μm Availability: immediately Condition: well-maintained, in working order
1 Deck Resonance Screening Machine - Workshop overhauled and tested
Separator ALFA LAVAL for beer, fruit juices, wine, cider, vegetable juices, tea, coffee, for citrus and tropical fruits for pectin Clarifier separator Capacity: 15,000 litres /h UNI-AFF UNI 047-500 Metrics: Height: 3000 mm Length: 4000 mm Width: 3000 mm Documentation, operating instructions and test books are available!
Manufacturer: Steinert Type of Machine: Wet Drum Magnetic Separator Year of Manufacture: 2015 Model: WDS 92 92 [without CE package] Find more here - / Contact us at -
Power supply : 380V, 50Hz Rated power : 7,200 W Heating temperature adjustable Maximum product height : 230 mm Maximum product width : 400 mm Belt speed : 3 - 18 m-min. eisnstellbar Dimensions approx. L x W x H : 1,400 x 850 x 1,500 mm
Steel tubes ST 37 galvanized, thick-walled, 5 mm material thickness, Diameter = 57 mm, Length = 3360 mm Unused, partly slight flash rust, slightly dirty, photos are older. Price for individual purchase, quantity discount possible from 25 pcs., approx. 150 pcs. available.
ID3469 Simec LM2000 – Grinding line year/Baujahr 1999 Grinding line consisting of: Protec tilting table, infeed conveyor table, pre-grinding machine with 4 grinding supports, warm air blower, Kirschner putty station, oven, grinding machine with 10 supports (pre-equipped for 12) Grinding line made of: Protec tilting table, infeed conveyor table, pre-grinding machine with 4 grinding supports, warm air blower, Kirschner putty station, oven, grinding machine with 10 supports (pre-equipped for 12)
horizontal pressure tank, steel tank with inner coating Can be used underground with anti-corrosion coating, e.g. for extinguishing water or rainwater Volume: 45,000 L Dimensions: Ø 2.80 × 7.70 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections and suction line. Inlet and overflow, water level gauge, anti-vortex plate, etc. can be offered additionally. In addition, the tank is treated with a new external coating (anti-corrosion). Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485
Standing stainless steel tank with flat bottom Volume: 40,000 L Dimensions: Ø 3.00 × 6.00 m high The tank can be equipped with a new agitator or pump on request. Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485
maximum number of results exceeded
please refine your search
