max s used for sale

WASHING INSTALLATION 90° One washer to washing system to clean the containers. The containers are tilted 90 degrees and transported through a washing device. The washing device consists of a housing that contains a spray device which is suitable for cold water with a pressure of 5bar. A conveyor belt to transport the containers. After washing, the containers are tilted back to horizontal position. No recycling water included. The concrete floor must be prepared to drain the water to a certain drain pit. The best option is lower the concrete floor in the area of the washer. OVERHEAD DE/STACKER For the PLC controlled movement, stacking and destacking of empty, containers with a maximum weight of 100 kg an overhead stacker/destacker is installed. The stacker/destacker can PLC controlled take up from:
-a-        The destacking position on the buffer (this is also the  ...

Gritter Küpper Weisser STA 95 W20 B, attachment device for Unimog, truck etc. driven by B & S petrol engine. Content 2.0 m. equipment: without plan retractable roof. Weight 800 kg. Not functional, corrosion, engine goes on strike - unaudited. With controller and documentary. More spreaders and winter maintenance technology stock! -Jacobis local, environmental & green care technology- Pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...

AGFA Soeicherfoliensystem (CR System) ADC Solo MUSICA Computer TFT LCD Monitor Model No. B18XA_Bj. 2001 • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Inlet height 600 - 900 mm outlet height approx. 870 mm stack height 160 - 300 mm product width 148 - 320 mm product length 190 - 480 mm product diagonal max. 580 mm ; ready for use

Infeed height 850 mm Delivery height 850 mm Pile height max 270 mm Product width 148-320 mm Product length 210-350 mm ; working condition

ORDER NO. 6591 TECHNICAL DATA - track width 450mm - shaft width 450mm - disc bore diameter 80mm - shaft diameter 60mm - min dial diameter 300mm - max dial diameter 400mm - max cutting height 250mm - max width of input material 860mm - min length of the workpiece 800mm in advance: - repellers - pulling shaft, metal pressed pneumatically - repellers - pulling shaft, metal, pneumatically pressed - pressure - shaft with saws - pressure - 2 pulling shafts, metal pressed pneumatically bottom: - metal roller, slip roller - guide - repellers - caterpillar - shaft with saws - caterpillar - smooth adjustment of the feed speed on the inverter 4-40m/min - main motors 2x75kW - feed motor about 3kW - electric body lift up/down 0.55kW - electric shaft adjustment with saws 2×0.18kW - central lubrication - diameter of the extraction connection 2x300mm  ...

Built in 2004 Capacity single straps up to 40 straps/min Size packaged good width max 580 mm min 180 mm Size packaged good height max 400 mm min 10 mm Equipment cross strapping machine 2003 HS inline strapping machine 2003 I ; working condition

Built in 1995 Size max 450 x 350 x 280 mm min 140 x 100 x 80 mm Mechanical speed 7.000 c/h ; working condition

Machine type TIG inverter welding system gas-cooled DC system Make EP-Systems Type TopTIG 160 HF Connection voltage 1 x 230 Volt Setting range 5 – 160 amps Duty cycle 60 % ED at 160 Ampere 100% ED at 130 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 240 x 320 mm Weight 10 kg Age 4 years Condition workshop tested very good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped Warranty 6 months from the date of delivery Original price 1.550,00 € + VAT Price kpl. from ...

Siemens Advia Centaur XP Analysis System With Siemens Healthineers services and maintenance until the last minute 02/2022 Modern AE immunoassay technology Meet clinical requirements with acridinium ester (AE) technology, which ensures the necessary flexibility and sensitivity for new and innovative assays. Comprehensive diagnostic clarification of various clinical pictures thanks to a test menu with over 70 different assays. Simplified inventory management and lower costs by using the same ready-to-use reagents on all ADVIA Centaur analysis systems. Simplified operation, continuous operation All samples, reagents and consumables can be loaded and unloaded during operation. Easier training and operation thanks to an intuitive, icon-based user interface. Fewer operator intervention because daily maintenance is low and the system does not need to be cleaned monthly or booted  ...

Bosch Turbo Scara SR8 Robot + Controller MA4/200-7301-M + RH04.0S Manufacturer: Bosch PN. pressure max. 8 bar Load max 8 kg Weight robot 51 kg + Control consisting of the following components: Rexroth / MA4/200-7301-M / Robot Controller Module Rexroth RH04.0S Swivel range / Technical data see picture Since the article is available several times and the robots carry different working tools these are only sample pictures and may differ. Item condition used (Changes and errors in the technical data, information reserved!) In addition to about 50 paternosters, countless other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves abundantly available A total of 24,000 m² of production space will be dismantled and sold Please  ...

Used Fachboodenregale (a plug-in system) are available for sale. technical data: -Number of frames: 5 -Frame height: 2500 mm -Frame depth: 500 mm -Number of subjects per compartment: 7 -Tray width: 1400 mm -Specialist load capacity: 40 kg -Length of the offered shelf approximately 5800 mm Additional information: A large number of the offered goods available - is now available from stock. Other configurations of racks possible. Price â?¬290 net plus VAT for offered shelf Offer is valid until stocks last. Before you click buy, you record please contact with us, to confirm the availability of the product.

We offer a powered shears roller conveyor for sale. The length is variable: 3275 mm 8735mm max. Roll width 610 mm. Suitable for distribution centers and depots for the loading and unloading of trucks, containers and wagons. Stepless height adjustment. A very simple drive into various types of vehicles for its fast and safe loading and unloading. After use, can be easily folded away to save the space in the warehouse. Technical data: Length retracted: 3275 mm Length extended: 8735 mm Width: 610mm Adjustable height: from 730 to 1040mm Rows of rollers: 67 units Three-phase motor 120W Speed: from 5-35M / min. Control Panel x 1 piece Panel x 1 piece maximum load: 80kg / M Number available: 4 PCs. Net price 6920 / piece Delivery possible. Please specify your postal code and directly ask. Offer is valid until stocks last.

16 diodes

Sottoriva Sprint 30 spiral mixer serial: B31656 2001, 30L spiral mixer, variable speed, stainless bowl and contact parts, safety guard, with timer

Bosch Turbo Scara SR8 Swivel Arm Robot Manufacturer: Bosch Order No. 3842999836 Serial No.3810333 HubPinole 40025 PN. pressure max. 8 bar Load max 8 kg Weight 51 kg Panning area see picture Mounted on aluminium profile base frame. Item condition used The robots were all in stock at a large automotive supplier as a failure replacement machine, so you are accordingly they are in very good condition. In addition to about 50 paternosters, countless other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves abundantly available A total of 24,000 m² of production space will be dismantled and sold Please also note our other offers.' After purchase, the amount is due within 7 working days.

Material: Stainless steel V2A Drive: 2,2 KW.

Complete range of well-preserved stamps and dies in the same number and diameter as in the brochure shown.

P93 - used approx. 11 m³ / 11,000 litres polyester tank / GRP-tank, aboveground, vertical, on ring base, Juno-tank, in good condition. volume: approx. 11 m³ / 11,000 litres material: polyester / fiberglass diameter: approx. 1.70 m height: approx. 5.50 m Vertically standing, aboveground storage tank by manufacturer Juno. Round shape, on ring base, dome on the front side, several in- and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is ...

Skjold stone mill type H-950/I Nr. 976918, 15 kw up to 1500 rpm, stone diameter 950 mm, technically fully repaired and repainted.

Holzkraft Precision Wood Band Saw HBS 533 SET Product name: Precision wood band saw HBS 533 SET Manufacturer: Holzkraft Item number: 5155303 SET Year of construction: 01/2022 Condition: As good as new technical details: • Dimensions work table (L x W x H): 535 mm x 535 mm x 945 mm • Saw table inclination: -10° to +45° • 2 x suction nozzles • Diameter suction nozzle: 2 x 120 mm • Working table length max.: 685 mm • Work table widening length: 535 mm • Work table widening width: 150 mm • Cutting height max. 90°: 270 mm • Cutting width max. with stop: 474 mm • Cutting width max. without stop: 514 mm • Band saw blade speeds: 850/430 m/min • Band saw length: 3,865 mm • Band saw guide: precision guide at the top and bottom • Weight: approx. 163 kg • incl. band saw set, length 3865 mm, 3 pieces - 1x band saw blade wood 3865 x 10 x 0.5  ...

Europemill stone mill 950 H, 15 kw at 1000 rpm, v-belt pulley diameter 190-5 x 17, flat belt pulley diameter 800, n = 237 rpm, cleaned. Used condition.

Properties Used MULTI PANEL Simatic dimensions: Total height with monitor: 1,620 mm Height without monitor: 1,100 mm Control cabinet Height: 500mm Width: 540mm Depth: 240mm > b > monitor Height: 310mm Width: 400mm 1 STK. in stock

see picture and on A.

Siemens Spare Parts

Synchronous motor, Simotics S, 1FK7085-4CF71-1CH1, Siemens, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation, is in a completely mint condition and in ist original packaging. - Synchronous motor - max. 3000 - 6000 rpm - max. 22 Nm - 26 kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Synchronous motor Simotics S, 1FT6086-8CA71-4AA0, Siemens, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation, is in a completely mint condition and in ist original packaging. - 26 kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

see picture for data. Table hoehen-adjustable. mass approx.: 1.55 x 0.8 x 2.1 m high

Synchronous motor Simotics S, 1FT7084-5AF70-1FH2, Siemens, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation, is in a completely mint condition and in ist original packaging. - Synchronous motor - 11 A - max. 3000 - 8000 rpm - max. 20 Nm - 27 kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

14-speed mounting screwdriver AC, for cylinder head mounting etc. Next: 3 spindle assembly screwdriver AC 3 and 6-spindle screwdriver ATLAS-COPCO 2 spindle screwdriver AC 3 spindle assembly screwdriver SPS & AC 1 spindle assembly screwdriver SPS

2-fold mounting screwdriver PLC, for adaptations etc.

Synchronous motor Simotics S, 1FT7086-5AF70-1FG2, Siemens, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation, is in a completely mint condition and in ist original packaging. - Synchronous motor - 15,5 A - max. 3000 - 8000 rpm - max. 28 Nm - 31 kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Feed sled unit hydraulic, with 2 spindles More: FEED-slide unit BMW hydraulic

Cross slide unit with 2 spindles, for conversions or adaptations

P88 - used approx. 35 m³ / 35,000 litres polyester tank / GRP-tank, including brine maker, aboveground, upright, with funnel, in good condition. volume: approx. 35 m³ / 35,000 litres material: polyester / GRP diameter: approx. 3.00 m on the inside height: approx. 8.00 m Manufacturer Reich, aboveground, vertically standing tank / silo, with inner chamber and funnel. Combined salt silo with brine maker below it. Dome on the top of the tank, multiple connections, in- and outlets, including filling tube. The container can be used as a storage tank for salt or many other media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one  ...

Machine to the dowel, drill and saw the company EKM spezialmaschinen connection value: 4,4 kW 1 pneum. Workpiece clamping system 1 drill head with 5 spindles in row spacing 25 mm / 40 mm / 40 mm / 25 mm 4 piece glue - and plugs Tools 4 piece adjustable on width 220 mm Under table saw Control PLC Siemens Simatic Fully functional replacement for PLC program on CD,. Shipping dimensions: L 1500 mm x W 1500 mm x H 2400 mm Machine weight: 1000 kg Condition good, fully functional

Vario can 15-3 capacity: 6,000 cans/h - 0, 33 ltr. Cans with 15 filling valves and 3 head can seamer between filler and seamer is a Co2 injection the filler is for beer and softdrinks suitable for both 330 ml and 500 ml can size can type standard 211/202 pneumatic: Festo CE regulation filling valves: electronic control pre-metering valve CIP tulps included PLC: Siemens new machine So available: Vario can 20-6 capacity: 9,000 cans/h - 0.33 ltr. Cans with 20 filling valves and 6head seamer Vario can 32-6 capacity: until 15,000 cans/h - 0.33 ltr. Cans With 32 filling valves and 6head seamer Video!

Sweco Taumel sieve ø 1200 mm different screens available.

MULTI MOULDERS machine with 7 shafts type SCM SUPERSET 23 PLUS . with SLIDE and RETURN PIECES type MAHROS RP/4 second hand machine CE mark : Yes volt. 380/50 - Composition (7 shafts , 7 independent engines): 1° shaft : lower horiz . motor power Hp 7,5 2° shaft : right vertical . motor power Hp 7,5 3° shaft: left vertical (automatic). motor power Hp 7,5 4° shaft : upper horiz. motor power Hp 10 5° shaft : upper horiz. motor power Hp 10 6° shaft : lower horiz. motor power Hp 7,5 7° shaft : universal 360° . motor power Hp 10 grove table inlet length mm. 2400 feed speed: from 5 to 35 mt./min max. useful working width mm. 230 max. useful working height mm. 120 shaft diameter mm.40 automatic lubrication system weight kgs. 4300

automatic double mitre saw OMS SALVARANI INVINCIBILE OK 330 CE standard : Yes n.02 motors . power Hp 3 each one blades diam.mm.330 max. useful cutting length mm.3000 max. useful cutting width 90° mm. 165 max. useful cutting width 45° mm. 115 max. useful cutting heigth mm.115 volt. 380/50 weigth kgs.650

Machine No. ST139K-53845, printing capacity 12 t, max. 60 mm stroke, table approx. 920 x 470 mm, stoessel approx. 560 x 350 mm, right exit switch disassembled, non-functional

Type SK1300-P6 Working width 1300 mm Min.working length 370 mm Working thickness 5-140mm Polishing roller speed - Frequency control Feeding speed 2.5-12,5 m/min Total motor power 16.87 kW

Serialization system for packaging line: suitable for the printing of code data on the cartons. Incl. camera vision system, bad ejection and data management system etc.

Manufacturer: MicroStep Type: SPL-PA 3001.15+S500 Working range: 3000 x 1500 mm + 500 mm shaft technology: plasma built in 2006 Kjellberg HiFocus 160i with autom. Gas console; (see PDF) 2 x additional quick-release co-buttons PerCut 170 Div. Wear parts Donaldson filter system including disassembly and delivery within Germany. Commissioning on request.

MULTI RIP SAW type CML SCA 320 with rip trimming unit with two circular blades with adjustable interaxle ( one moving saw ) Technical Details : carpet width mm. 320 max. cutting heigth mm. 120 minimum length of pieces mm. 300 blades diameter : min.mm.250 / max.mm.350 maximum distance between two external blades mm. 320 feeding speed mt/min. 0 / 36 motor power Hp 40 net weigth kgs. 2000 volt. 380/50

Plasma extraction and filter system Filter BLOC TFK PL Series special central suction and filter unit for plasma smoke when burning and cutting the FILTER BLOC TFK PL series and CQC certified manufacturer according to ISO 15012 and CE drawing FILTER BLOCK - TFK PLASMA 40/60/80 Motor power 5,5 / 7,5 / 11 KW air volume 4000/5500/6200 m3 / h 124/186/248 m2 filter surface dust container 4x/6x/8x 84 liters Automatic jet cleaning system with testing for welding fume category W3 24 Months Warranty The price refers to the TFK PL 40 for further information on request; ready to use

Te Koop: Endress & Hauser silo meter. FMC type met 470 Z Monorack 11

Te Koop: Endress & Hauser silo meter. Type: HTA 470 Z met Monorack 11

Te Coop: Endress & Hauser level sensor DELTA PILOT S DB50-L

2-sided LED display panel, SX502-420/05/0X-200-0A-20/0, Siebert, mint condition Special price The current price of a similar product is € 5.300 excl. VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new in original packaging! This high quality scoreboard was purchased in early 2000 and has been originally packed in spare parts storage since then. The unit is as good as new and has never been used. On the part of the manufacturer there is a limited service. Parallel interface for Profibus Serial interface for PC 2 page LED display 104 x 40 x 21cm Incl documentation and programs Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will ref ...